[Trac-bugs] [PC-BSD Trac] #1176: 10.0-RELEASE-p6 desktops not starting after updates

PC-BSD trac at pcbsd.org
Fri Jun 13 17:34:01 PDT 2014


#1176: 10.0-RELEASE-p6 desktops not starting after updates
-----------------------------------+------------------------
  Reporter:  davidec               |      Owner:  kris
      Type:  System Defect         |     Status:  new
  Priority:  minor                 |  Milestone:
 Component:  System Configuration  |    Version:  10.0.2-RC1
Resolution:                        |   Keywords:
-----------------------------------+------------------------

Comment (by davidec):

 FreeBSD popodell 10.0-RELEASE-p6 FreeBSD 10.0-RELEASE-p6 #0
 acf484b(releng/10.0): Mon Feb 24 15:14:38 EST 2014
 root at avenger:/usr/obj/root/pcbsd-build-10.0-EDGE/git/freebsd/sys/GENERIC
 amd64



 [davidc at popodell] ~% dmesg
 Copyright (c) 1992-2014 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
 FreeBSD is a registered trademark of The FreeBSD Foundation.
 FreeBSD 10.0-RELEASE-p6 #0 acf484b(releng/10.0): Mon Feb 24 15:14:38 EST
 2014
     root at avenger:/usr/obj/root/pcbsd-
 build-10.0-EDGE/git/freebsd/sys/GENERIC amd64
 FreeBSD clang version 3.3 (tags/RELEASE_33/final 183502) 20130610
 CPU: Intel(R) Core(TM)2 Duo CPU     E4500  @ 2.20GHz (2194.55-MHz K8-class
 CPU)
   Origin = "GenuineIntel"  Id = 0x6fd  Family = 0x6  Model = 0xf  Stepping
 = 13
 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
   Features2=0xe39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM>
   AMD Features=0x20100800<SYSCALL,NX,LM>
   AMD Features2=0x1<LAHF>
   TSC: P-state invariant, performance statistics
 real memory  = 2102390784 (2004 MB)
 avail memory = 2004492288 (1911 MB)
 Event timer "LAPIC" quality 400
 ACPI APIC Table: <DELL   B9K    >
 FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
 FreeBSD/SMP: 1 package(s) x 2 core(s)
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
 ioapic0: Changing APIC ID to 8
 ioapic0 <Version 2.0> irqs 0-23 on motherboard
 lapic0: Forcing LINT1 to edge trigger
 kbd1 at kbdmux0
 random: <Software, Yarrow> initialized
 cryptosoft0: <software crypto> on motherboard
 aesni0: No AESNI support.
 acpi0: <DELL B9K    > on motherboard
 acpi0: Power Button (fixed)
 cpu0: <ACPI CPU> on acpi0
 cpu1: <ACPI CPU> on acpi0
 atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
 Event timer "RTC" frequency 32768 Hz quality 0
 attimer0: <AT timer> port 0x40-0x5f irq 0 on acpi0
 Timecounter "i8254" frequency 1193182 Hz quality 0
 Event timer "i8254" frequency 1193182 Hz quality 100
 hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
 Timecounter "HPET" frequency 14318180 Hz quality 950
 Event timer "HPET" frequency 14318180 Hz quality 450
 Event timer "HPET1" frequency 14318180 Hz quality 440
 Event timer "HPET2" frequency 14318180 Hz quality 440
 Event timer "HPET3" frequency 14318180 Hz quality 440
 Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
 acpi_button0: <Power Button> on acpi0
 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 pcib0: Length mismatch for 3 range: ec00001 vs ec00000
 pci0: <ACPI PCI bus> on pcib0
 vgapci0: <VGA-compatible display> port 0xec90-0xec97 mem
 0xfea00000-0xfea7ffff,0xd0000000-0xdfffffff,0xfeb00000-0xfebfffff irq 16
 at device 2.0 on pci0
 agp0: <Intel Q35 SVGA controller> on vgapci0
 agp0: aperture size is 256M, detected 7164k stolen memory
 vgapci0: Boot video device
 vgapci1: <VGA-compatible display> mem 0xfea80000-0xfeafffff at device 2.1
 on pci0
 pci0: <simple comms> at device 3.0 (no driver attached)
 atapci0: <Intel ATA controller> port
 0xfe80-0xfe87,0xfe90-0xfe93,0xfea0-0xfea7,0xfeb0-0xfeb3,0xfef0-0xfeff irq
 18 at device 3.2 on pci0
 ata2: <ATA channel> at channel 0 on atapci0
 ata3: <ATA channel> at channel 1 on atapci0
 pci0: <simple comms, UART> at device 3.3 (no driver attached)
 em0: <Intel(R) PRO/1000 Network Connection 7.3.8> port 0xecc0-0xecdf mem
 0xfe9e0000-0xfe9fffff,0xfe9db000-0xfe9dbfff irq 21 at device 25.0 on pci0
 em0: Using an MSI interrupt
 em0: Ethernet address: 00:21:70:06:8f:e6
 uhci0: <Intel 82801I (ICH9) USB controller> port 0xff20-0xff3f irq 16 at
 device 26.0 on pci0
 uhci0: LegSup = 0x2f00
 usbus0 on uhci0
 uhci1: <Intel 82801I (ICH9) USB controller> port 0xff00-0xff1f irq 17 at
 device 26.1 on pci0
 uhci1: LegSup = 0x2f00
 usbus1 on uhci1
 ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfe9d9c00-0xfe9d9fff
 irq 22 at device 26.7 on pci0
 usbus2: EHCI version 1.0
 usbus2 on ehci0
 hdac0: <Intel 82801I HDA Controller> mem 0xfe9dc000-0xfe9dffff irq 16 at
 device 27.0 on pci0
 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
 pci1: <ACPI PCI bus> on pcib1
 uhci2: <Intel 82801I (ICH9) USB controller> port 0xff80-0xff9f irq 23 at
 device 29.0 on pci0
 usbus3 on uhci2
 uhci3: <Intel 82801I (ICH9) USB controller> port 0xff60-0xff7f irq 17 at
 device 29.1 on pci0
 usbus4 on uhci3
 uhci4: <Intel 82801I (ICH9) USB controller> port 0xff40-0xff5f irq 18 at
 device 29.2 on pci0
 usbus5 on uhci4
 ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xff980800-0xff980bff
 irq 23 at device 29.7 on pci0
 usbus6: EHCI version 1.0
 usbus6 on ehci1
 pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
 pci2: <ACPI PCI bus> on pcib2
 isab0: <PCI-ISA bridge> at device 31.0 on pci0
 isa0: <ISA bus> on isab0
 ahci0: <Intel ICH9 AHCI SATA controller> port
 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfec0-0xfedf mem
 0xff970000-0xff9707ff irq 18 at device 31.2 on pci0
 ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
 ahcich0: <AHCI channel> at channel 0 on ahci0
 ahcich1: <AHCI channel> at channel 1 on ahci0
 ahciem0: <AHCI enclosure management bridge> on ahci0
 pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
 ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0
 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
 ppc0: FIFO with 16/16/8 bytes threshold
 ppbus0: <Parallel port bus> on ppc0
 lpt0: <Printer> on ppbus0
 lpt0: Interrupt-driven port
 ppi0: <Parallel I/O> on ppbus0
 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
 orm0: <ISA Option ROMs> at iomem
 0xc0000-0xcb7ff,0xcb800-0xcd7ff,0xcd800-0xcffff on isa0
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x300>
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
 atkbd0: <AT Keyboard> irq 1 on atkbdc0
 kbd0 at atkbd0
 atkbd0: [GIANT-LOCKED]
 est0: <Enhanced SpeedStep Frequency Control> on cpu0
 est: CPU supports Enhanced Speedstep, but is not recognized.
 est: cpu_vendor GenuineIntel, msr b280b2806000b28
 device_attach: est0 attach returned 6
 p4tcc0: <CPU Frequency Thermal Control> on cpu0
 est1: <Enhanced SpeedStep Frequency Control> on cpu1
 est: CPU supports Enhanced Speedstep, but is not recognized.
 est: cpu_vendor GenuineIntel, msr b280b2806000b28
 device_attach: est1 attach returned 6
 p4tcc1: <CPU Frequency Thermal Control> on cpu1
 ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is
 present;
             to enable, add "vfs.zfs.prefetch_disable=0" to
 /boot/loader.conf.
 ZFS filesystem version: 5
 ZFS storage pool version: features support (5000)
 Timecounters tick every 1.000 msec
 hdacc0: <Analog Devices AD1984 HDA CODEC> at cad 0 on hdac0
 hdaa0: <Analog Devices AD1984 Audio Function Group> at nid 1 on hdacc0
 pcm0: <Analog Devices AD1984 (Analog)> at nid 18 and 20 on hdaa0
 pcm1: <Analog Devices AD1984 (Analog)> at nid 17 and 21 on hdaa0
 random: unblocking device.
 usbus0: 12Mbps Full Speed USB v1.0
 usbus1: 12Mbps Full Speed USB v1.0
 usbus2: 480Mbps High Speed USB v2.0
 usbus3: 12Mbps Full Speed USB v1.0
 usbus4: 12Mbps Full Speed USB v1.0
 usbus5: 12Mbps Full Speed USB v1.0
 usbus6: 480Mbps High Speed USB v2.0
 ugen1.1: <Intel> at usbus1
 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
 ugen0.1: <Intel> at usbus0
 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
 ugen3.1: <Intel> at usbus3
 uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
 ugen2.1: <Intel> at usbus2
 uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
 ugen5.1: <Intel> at usbus5
 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
 ugen4.1: <Intel> at usbus4
 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
 ugen6.1: <Intel> at usbus6
 uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
 uhub0: 2 ports with 2 removable, self powered
 uhub1: 2 ports with 2 removable, self powered
 uhub2: 2 ports with 2 removable, self powered
 uhub4: 2 ports with 2 removable, self powered
 uhub5: 2 ports with 2 removable, self powered
 uhub6: 6 ports with 6 removable, self powered
 uhub3: 6 ports with 6 removable, self powered
 ada0 at ahcich0 bus 0 scbus2 target 0 lun 0
 ada0: <ST3808110AS 3.ADJ> ATA-7 SATA 2.x device
 ada0: Serial Number 5LRCY7E6
 ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
 ada0: Command Queueing enabled
 ada0: 76293MB (156250000 512 byte sectors: 16H 63S/T 16383C)
 ada0: Previously was known as ad8
 ses0 at ahciem0 bus 0 scbus4 target 0 lun 0
 ses0: <AHCI SGPIO Enclosure 1.00 0001> SEMB S-E-S 2.00 device
 ses0: SEMB SES Device
 Netvsc initializing... lapic1: Forcing LINT1 to edge trigger
 SMP: AP CPU #1 Launched!
 Timecounter "TSC-low" frequency 1097272544 Hz quality 1000
 ugen6.2: <vendor 0x0b05> at usbus6
 ugen0.2: <Microsoft> at usbus0
 ukbd0: <Microsoft Wired Keyboard 400, class 0/0, rev 1.10/1.10, addr 2> on
 usbus0
 kbd2 at ukbd0
 cd0 at ahcich1 bus 0 scbus3 target 0 lun 0
 cd0: <PBDS DVD+-RW DS-8W1P BD1B> Removable CD-ROM SCSI-0 device
 cd0: Serial Number 802020337492
 cd0: 150.000MB/s transfers (SATA 1.x, UDMA2, ATAPI 12bytes, PIO 8192bytes)
 cd0: Attempt to query device size failed: NOT READY, Medium not present
 Trying to mount root from zfs:tank1/ROOT/beforeUpdate-2014-06-08_22-46-53
 []...
 ugen1.2: <MOSART Semi.> at usbus1
 ums0: <MOSART Semi. 2.4G Wireless Mouse, class 0/0, rev 1.10/1.03, addr 2>
 on usbus1
 ums0: 5 buttons and [XYZT] coordinates ID=3
 GEOM_ELI: Device label/swap0.eli created.
 GEOM_ELI: Encryption: AES-XTS 128
 GEOM_ELI:     Crypto: software
 Cuse4BSD v0.1.33 @ /dev/cuse
 fuse-freebsd: version 0.4.4, FUSE ABI 7.8
 urtwn0: <vendor 0x0b05 product 0x17ab, class 0/0, rev 2.00/2.00, addr 2>
 on usbus6
 urtwn0: MAC/BB RTL8192CU, RF 6052 2T2R
 wlan0: Ethernet address: 08:60:6e:d0:29:f6
 ipfw2 (+ipv6) initialized, divert loadable, nat loadable, default to deny,
 logging disabled
 WARNING: attempt to domain_add(bluetooth) after domainfinalize()
 info: [drm] Initialized drm 1.1.0 20060810
 drmn0: <Intel Q35> on vgapci0
 info: [drm] MSI enabled 1 message(s)
 info: [drm] AGP at 0xd0000000 256MB
 iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
 iic0: <I2C generic I/O> on iicbus0
 iic1: <I2C generic I/O> on iicbus1
 iicbus2: <Philips I2C bus> on iicbb1 addr 0xff
 iic2: <I2C generic I/O> on iicbus2
 iic3: <I2C generic I/O> on iicbus3
 iicbus4: <Philips I2C bus> on iicbb2 addr 0xff
 iic4: <I2C generic I/O> on iicbus4
 iic5: <I2C generic I/O> on iicbus5
 iicbus6: <Philips I2C bus> on iicbb3 addr 0xff
 iic6: <I2C generic I/O> on iicbus6
 iic7: <I2C generic I/O> on iicbus7
 iicbus8: <Philips I2C bus> on iicbb4 addr 0xff
 iic8: <I2C generic I/O> on iicbus8
 iic9: <I2C generic I/O> on iicbus9
 iicbus10: <Philips I2C bus> on iicbb5 addr 0xff
 iic10: <I2C generic I/O> on iicbus10
 iic11: <I2C generic I/O> on iicbus11
 iicbus12: <Philips I2C bus> on iicbb6 addr 0xff
 iic12: <I2C generic I/O> on iicbus12
 iic13: <I2C generic I/O> on iicbus13
 iicbus14: <Philips I2C bus> on iicbb7 addr 0xff
 iic14: <I2C generic I/O> on iicbus14
 iic15: <I2C generic I/O> on iicbus15
 info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
 info: [drm] Driver supports precise vblank timestamp query.
 drmn0: taking over the fictitious range 0xd0000000-0xe0000000
 info: [drm] initialized overlay support
 info: [drm] Initialized i915 1.6.0 20080730
 pid 5753 (pc-softwaremanager), uid 0: exited on signal 11
 ugen2.2: <SMI Corporation> at usbus2
 umass0: <SMI Corporation USB DISK, class 0/0, rev 2.00/11.00, addr 2> on
 usbus2
 umass0:  SCSI over Bulk-Only; quirks = 0x4000
 umass0:5:0:-1: Attached to scbus5
 da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
 da0: <USB Flash Disk 1100> Removable Direct Access SCSI-0 device
 da0: Serial Number AA04012700007533
 da0: 40.000MB/s transfers
 da0: 123MB (252928 512 byte sectors: 64H 32S/T 123C)
 da0: quirks=0x2<NO_6_BYTE>

--
Ticket URL: <http://trac.pcbsd.org/ticket/1176#comment:3>
PC-BSD <http://trac.pcbsd.org>
PC-BSD Project Management


More information about the Trac-bugs mailing list