[Trac-bugs] [PC-BSD Trac] #291: No /boot/loader error

PC-BSD trac at pcbsd.org
Thu May 27 04:29:31 PDT 2010


#291: No /boot/loader error
----------------------------+-----------------------------------------------
  Reporter:  mjanosi        |       Owner:  kris    
      Type:  System Defect  |      Status:  reopened
  Priority:  major          |   Milestone:          
 Component:  Installer      |     Version:  8.0     
Resolution:                 |    Keywords:          
----------------------------+-----------------------------------------------

Comment(by mjanosi):

 PCBSD8-STABLE-20100524-x64-DVD.iso failed with the following pc-
 sysinstall.log:

 # PC-SYSINSTALL LOG
 Running: find-update-parts
 mount: no : No such file or directory
 kern.geom.debugflags: 0 -> 16
 Running gpart modify on ada0s2
 Running: gpart modify -t freebsd -i 2 ada0s2
 gpart: index '2': No such file or directory
 Error 1: gpart modify -t freebsd -i 2 ada0s2
 Running: umount /cdmnt-install
 umount: /cdmnt-install: statfs: No such file or directory
 umount: /cdmnt-install: unknown file system
 Trying DHCP on em0  <Intel(R) PRO/1000 Network Connection 7.0.5>

 # PC-SYSINSTALL CFG
 # Auto-Generated pc-sysinstall configuration
 installInteractive=no
 installMode=fresh
 installType=PCBSD
 packageType=uzip

 # Doing PC-BSD Install make sure to start xorg-gui at first boot
 runCommand=cp /usr/PCBSD/xorg-gui/conf/ttys.xsetup /etc/ttys
 runCommand=sh /usr/PCBSD/Scripts/reset-firewall
 installMedium=dvd
 netSaveDev=AUTO-DHCP

 # Timezone
 timeZone=America/New_York
 enableNTP=yes

 # Keyboard Layout Options
 localizeKeyModel=pc104
 localizeKeyLayout=us

 # Disk Setup for ada0
 disk0=ada0
 partition=s2
 bootManager=none
 commitDiskPart

 # Partition Setup for ada0(s2)
 # All sizes are expressed in MB
 # Avail FS Types, UFS, UFS+S, UFS+J, ZFS, SWAP
 # UFS.eli, UFS+S.eli, UFS+J.eli, ZFS.eli, SWAP.eli
 disk0-part=UFS+S 2048 /
 disk0-part=SWAP 9472 none
 disk0-part=UFS+S 1024 /var
 disk0-part=UFS+S 2810 /usr
 commitDiskLabel


 # Optional Components
 installComponents=

 # Root Password
 rootPass=fradi1

 # Users
 userName=mjanosi
 userComment=Miklos Janosi
 userPass=fradi1
 userShell=/bin/csh
 userHome=/home/mjanosi
 userGroups=wheel,operator
 autoLoginUser=mjanosi
 commitUser


 # DMESG OUTPUT
 Copyright (c) 1992-2010 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
 FreeBSD is a registered trademark of The FreeBSD Foundation.
 FreeBSD 8.1-PRERELEASE #5: Wed May 19 15:05:55 UTC 2010
     root at build8x64.pcbsd.org:/usr/obj/storage/builds/pcbsd-build81-x64
 /fbsd-source/8-stable/sys/PCBSD amd64
 Timecounter "i8254" frequency 1193182 Hz quality 0
 CPU: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz (2394.00-MHz K8-class
 CPU)
   Origin = "GenuineIntel"  Id = 0x6fb  Family = 6  Model = f  Stepping =
 11
 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
 Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
   AMD Features=0x20100800<SYSCALL,NX,LM>
   AMD Features2=0x1<LAHF>
   TSC: P-state invariant
 real memory  = 4294967296 (4096 MB)
 avail memory = 3943510016 (3760 MB)
 ACPI APIC Table: <DELL   B9K    >
 FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 FreeBSD/SMP: 1 package(s) x 4 core(s)
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
  cpu2 (AP): APIC ID:  2
  cpu3 (AP): APIC ID:  3
 ioapic0: Changing APIC ID to 8
 ioapic0 <Version 2.0> irqs 0-23 on motherboard
 lapic0: Forcing LINT1 to edge trigger
 kbd1 at kbdmux0
 cryptosoft0: <software crypto> on motherboard
 acpi0: <DELL B9K    > on motherboard
 acpi0: [ITHREAD]
 acpi0: Power Button (fixed)
 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
 cpu0: <ACPI CPU> on acpi0
 cpu1: <ACPI CPU> on acpi0
 cpu2: <ACPI CPU> on acpi0
 cpu3: <ACPI CPU> on acpi0
 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
 acpi0
 Timecounter "HPET" frequency 14318180 Hz quality 900
 acpi_button0: <Power Button> on acpi0
 acpi_button0: enable wake failed
 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 pci0: <ACPI PCI bus> on pcib0
 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
 pci1: <ACPI PCI bus> on pcib1
 vgapci0: <VGA-compatible display> port 0xdc80-0xdcff mem
 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xfa000000-0xfbffffff irq 16
 at device 0.0 on pci1
 pci0: <simple comms> at device 3.0 (no driver attached)
 atapci0: <Intel ATA controller> port
 0xfe80-0xfe87,0xfe90-0xfe93,0xfea0-0xfea7,0xfeb0-0xfeb3,0xfef0-0xfeff irq
 18 at device 3.2 on pci0
 atapci0: [ITHREAD]
 ata2: <ATA channel 0> on atapci0
 ata2: [ITHREAD]
 ata3: <ATA channel 1> on atapci0
 ata3: [ITHREAD]
 pci0: <simple comms, UART> at device 3.3 (no driver attached)
 em0: <Intel(R) PRO/1000 Network Connection 7.0.5> port 0xecc0-0xecdf mem
 0xfebe0000-0xfebfffff,0xfebdb000-0xfebdbfff irq 21 at device 25.0 on pci0
 em0: Using MSI interrupt
 em0: [FILTER]
 em0: Ethernet address: 00:21:9b:86:17:64
 uhci0: <Intel 82801I (ICH9) USB controller> port 0xff20-0xff3f irq 16 at
 device 26.0 on pci0
 uhci0: [ITHREAD]
 uhci0: LegSup = 0x2f00
 usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
 uhci1: <Intel 82801I (ICH9) USB controller> port 0xff00-0xff1f irq 17 at
 device 26.1 on pci0
 uhci1: [ITHREAD]
 uhci1: LegSup = 0x2f00
 usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
 ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfebd9c00-0xfebd9fff
 irq 22 at device 26.7 on pci0
 ehci0: [ITHREAD]
 usbus2: EHCI version 1.0
 usbus2: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
 pci0: <multimedia, HDA> at device 27.0 (no driver attached)
 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
 pci2: <ACPI PCI bus> on pcib2
 uhci2: <Intel 82801I (ICH9) USB controller> port 0xff80-0xff9f irq 23 at
 device 29.0 on pci0
 uhci2: [ITHREAD]
 usbus3: <Intel 82801I (ICH9) USB controller> on uhci2
 uhci3: <Intel 82801I (ICH9) USB controller> port 0xff60-0xff7f irq 17 at
 device 29.1 on pci0
 uhci3: [ITHREAD]
 usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
 uhci4: <Intel 82801I (ICH9) USB controller> port 0xff40-0xff5f irq 18 at
 device 29.2 on pci0
 uhci4: [ITHREAD]
 usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
 ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xff980800-0xff980bff
 irq 23 at device 29.7 on pci0
 ehci1: [ITHREAD]
 usbus6: EHCI version 1.0
 usbus6: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
 pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
 pci3: <ACPI PCI bus> on pcib3
 isab0: <PCI-ISA bridge> at device 31.0 on pci0
 isa0: <ISA bus> on isab0
 ahci0: <Intel ICH9 AHCI SATA controller> port
 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfec0-0xfedf mem
 0xff970000-0xff9707ff irq 18 at device 31.2 on pci0
 ahci0: [ITHREAD]
 ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
 ahcich0: <AHCI channel> at channel 0 on ahci0
 ahcich0: [ITHREAD]
 ahcich1: <AHCI channel> at channel 1 on ahci0
 ahcich1: [ITHREAD]
 ahcich2: <AHCI channel> at channel 2 on ahci0
 ahcich2: [ITHREAD]
 ahcich3: <AHCI channel> at channel 3 on ahci0
 ahcich3: [ITHREAD]
 ahcich4: <AHCI channel> at channel 5 on ahci0
 ahcich4: [ITHREAD]
 pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
 atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
 ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0
 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
 ppc0: FIFO with 16/16/8 bytes threshold
 ppc0: [ITHREAD]
 ppbus0: <Parallel port bus> on ppc0
 plip0: <PLIP network interface> on ppbus0
 plip0: [ITHREAD]
 lpt0: <Printer> on ppbus0
 lpt0: [ITHREAD]
 lpt0: Interrupt-driven port
 ppi0: <Parallel I/O> on ppbus0
 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
 uart0: [FILTER]
 orm0: <ISA Option ROMs> at iomem
 0xc0000-0xce7ff,0xce800-0xd07ff,0xd0800-0xd2fff,0xd3000-0xd3fff on isa0
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x300>
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
 atkbd0: <AT Keyboard> irq 1 on atkbdc0
 kbd0 at atkbd0
 atkbd0: [GIANT-LOCKED]
 atkbd0: [ITHREAD]
 est0: <Enhanced SpeedStep Frequency Control> on cpu0
 est: CPU supports Enhanced Speedstep, but is not recognized.
 est: cpu_vendor GenuineIntel, msr 926092606000926
 device_attach: est0 attach returned 6
 p4tcc0: <CPU Frequency Thermal Control> on cpu0
 est1: <Enhanced SpeedStep Frequency Control> on cpu1
 est: CPU supports Enhanced Speedstep, but is not recognized.
 est: cpu_vendor GenuineIntel, msr 926092606000926
 device_attach: est1 attach returned 6
 p4tcc1: <CPU Frequency Thermal Control> on cpu1
 est2: <Enhanced SpeedStep Frequency Control> on cpu2
 est: CPU supports Enhanced Speedstep, but is not recognized.
 est: cpu_vendor GenuineIntel, msr 926092606000926
 device_attach: est2 attach returned 6
 p4tcc2: <CPU Frequency Thermal Control> on cpu2
 est3: <Enhanced SpeedStep Frequency Control> on cpu3
 est: CPU supports Enhanced Speedstep, but is not recognized.
 est: cpu_vendor GenuineIntel, msr 926092606000926
 device_attach: est3 attach returned 6
 p4tcc3: <CPU Frequency Thermal Control> on cpu3
 ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is
 present;
             to enable, add "vfs.zfs.prefetch_disable=0" to
 /boot/loader.conf.
 ZFS filesystem version 3
 ZFS storage pool version 14
 RTC BIOS diagnostic error 11<memory_size>
 Timecounters tick every 1.000 msec
 md0: Preloaded image </boot/mfsroot> 28672000 bytes at 0xffffffff81136258
 usbus0: 12Mbps Full Speed USB v1.0
 usbus1: 12Mbps Full Speed USB v1.0
 usbus2: 480Mbps High Speed USB v2.0
 usbus3: 12Mbps Full Speed USB v1.0
 usbus4: 12Mbps Full Speed USB v1.0
 usbus5: 12Mbps Full Speed USB v1.0
 usbus6: 480Mbps High Speed USB v2.0
 ugen0.1: <Intel> at usbus0
 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
 ugen1.1: <Intel> at usbus1
 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
 ugen2.1: <Intel> at usbus2
 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
 ugen3.1: <Intel> at usbus3
 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
 ugen4.1: <Intel> at usbus4
 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
 ugen5.1: <Intel> at usbus5
 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
 ugen6.1: <Intel> at usbus6
 uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
 ada0: <ST3250310AS 3.ADA> ATA-8 SATA 2.x device
 ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
 ada0: Command Queueing enabled
 ada0: 238418MB (488281250 512 byte sectors: 16H 63S/T 16383C)
 lapic1: Forcing LINT1 to edge trigger
 cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
 cd0: <TSSTcorp DVD+-RW TS-H653F D200> Removable CD-ROM SCSI-0 device
 cd0: 150.000MB/s transfersSMP: AP CPU #1 Launched! (
 lapicSAT3A:  1.Fox,rc ing LINT1 to edge triggerUDMA5,
 ATAPI 12bytes, PIO 8192bytes)
 cd0: cd present [1781616 x 2048 byte records]
 SMP: AP CPU #3 Launched!
 lapic2: Forcing LINT1 to edge trigger
 SMP: AP CPU #2 Launched!
 uhub0: 2 ports with 2 removable, self powered
 uhub1: 2 ports with 2 removable, self powered
 uhub3: 2 ports with 2 removable, self powered
 uhub4: 2 ports with 2 removable, self powered
 uhub5: 2 ports with 2 removable, self powered
 uhub2: 6 ports with 6 removable, self powered
 uhub6: 6 ports with 6 removable, self powered
 Root mount waiting for: usbus6
 Root mount waiting for: usbus6
 ugen4.2: <Dell> at usbus4
 ukbd0: <EP1 Interrupt> on usbus4
 kbd2 at ukbd0
 ugen6.2: <USB> at usbus6
 umass0: <USB Flash Disk, class 0/0, rev 2.00/2.00, addr 2> on usbus6
 umass0:  SCSI over Bulk-Only; quirks = 0x0000
 Root mount waiting for: usbus6
 ugen4.3: <vendor 0x413c> at usbus4
 ums0: <vendor 0x413c Dell Premium USB Optical Mouse, class 0/0, rev
 2.00/0.09, addr 3> on usbus4
 ums0: 5 buttons and [XYZT] coordinates ID=0
 umass0:5:0:-1: Attached to scbus5
 Trying to mount root from ufs:/dev/ufs/ROOTFS
 da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
 da0: <Simple Flash Disk 2.0 2.00> Removable Direct Access SCSI-2 device
 da0: 40.000MB/s transfers
 da0: 1991MB (4077568 512 byte sectors: 255H 63S/T 253C)
 GEOM: da0: partition 1 does not start on a track boundary.
 GEOM: da0: partition 1 does not end on a track boundary.
 md7.uzip: 19006 x 65536 blocks
 /tmp: optimization changed from SPACE to TIME
 GEOM: da0: partition 1 does not start on a track boundary.
 GEOM: da0: partition 1 does not end on a track boundary.
 em0: link state changed to DOWN
 em0: link state changed to UP
 Waiting (max 60 seconds) for system process `vnlru' to stop...done
 Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
 Waiting (max 60 seconds) for system process `syncer' to stop...
 Syncing disks, vnodes remaining...0 0 0 done
 All buffers synced.
 Copyright (c) 1992-2010 The FreeBSD Project.
 Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
         The Regents of the University of California. All rights reserved.
 FreeBSD is a registered trademark of The FreeBSD Foundation.
 FreeBSD 8.1-PRERELEASE #5: Wed May 19 15:05:55 UTC 2010
     root at build8x64.pcbsd.org:/usr/obj/storage/builds/pcbsd-build81-x64
 /fbsd-source/8-stable/sys/PCBSD amd64
 Timecounter "i8254" frequency 1193182 Hz quality 0
 CPU: Intel(R) Core(TM)2 Quad CPU    Q6600  @ 2.40GHz (2394.00-MHz K8-class
 CPU)
   Origin = "GenuineIntel"  Id = 0x6fb  Family = 6  Model = f  Stepping =
 11
 Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
 Features2=0xe3bd<SSE3,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
   AMD Features=0x20100800<SYSCALL,NX,LM>
   AMD Features2=0x1<LAHF>
   TSC: P-state invariant
 real memory  = 4294967296 (4096 MB)
 avail memory = 3943510016 (3760 MB)
 ACPI APIC Table: <DELL   B9K    >
 FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
 FreeBSD/SMP: 1 package(s) x 4 core(s)
  cpu0 (BSP): APIC ID:  0
  cpu1 (AP): APIC ID:  1
  cpu2 (AP): APIC ID:  2
  cpu3 (AP): APIC ID:  3
 ioapic0: Changing APIC ID to 8
 ioapic0 <Version 2.0> irqs 0-23 on motherboard
 lapic0: Forcing LINT1 to edge trigger
 kbd1 at kbdmux0
 cryptosoft0: <software crypto> on motherboard
 acpi0: <DELL B9K    > on motherboard
 acpi0: [ITHREAD]
 acpi0: Power Button (fixed)
 Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
 cpu0: <ACPI CPU> on acpi0
 cpu1: <ACPI CPU> on acpi0
 cpu2: <ACPI CPU> on acpi0
 cpu3: <ACPI CPU> on acpi0
 acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
 acpi0
 Timecounter "HPET" frequency 14318180 Hz quality 900
 acpi_button0: <Power Button> on acpi0
 acpi_button0: enable wake failed
 pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
 pci0: <ACPI PCI bus> on pcib0
 pcib1: <ACPI PCI-PCI bridge> irq 16 at device 1.0 on pci0
 pci1: <ACPI PCI bus> on pcib1
 vgapci0: <VGA-compatible display> port 0xdc80-0xdcff mem
 0xfd000000-0xfdffffff,0xd0000000-0xdfffffff,0xfa000000-0xfbffffff irq 16
 at device 0.0 on pci1
 pci0: <simple comms> at device 3.0 (no driver attached)
 atapci0: <Intel ATA controller> port
 0xfe80-0xfe87,0xfe90-0xfe93,0xfea0-0xfea7,0xfeb0-0xfeb3,0xfef0-0xfeff irq
 18 at device 3.2 on pci0
 atapci0: [ITHREAD]
 ata2: <ATA channel 0> on atapci0
 ata2: [ITHREAD]
 ata3: <ATA channel 1> on atapci0
 ata3: [ITHREAD]
 pci0: <simple comms, UART> at device 3.3 (no driver attached)
 em0: <Intel(R) PRO/1000 Network Connection 7.0.5> port 0xecc0-0xecdf mem
 0xfebe0000-0xfebfffff,0xfebdb000-0xfebdbfff irq 21 at device 25.0 on pci0
 em0: Using MSI interrupt
 em0: [FILTER]
 em0: Ethernet address: 00:21:9b:86:17:64
 uhci0: <Intel 82801I (ICH9) USB controller> port 0xff20-0xff3f irq 16 at
 device 26.0 on pci0
 uhci0: [ITHREAD]
 uhci0: LegSup = 0x2f00
 usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
 uhci1: <Intel 82801I (ICH9) USB controller> port 0xff00-0xff1f irq 17 at
 device 26.1 on pci0
 uhci1: [ITHREAD]
 uhci1: LegSup = 0x2f00
 usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
 ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfebd9c00-0xfebd9fff
 irq 22 at device 26.7 on pci0
 ehci0: [ITHREAD]
 usbus2: EHCI version 1.0
 usbus2: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
 pci0: <multimedia, HDA> at device 27.0 (no driver attached)
 pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.0 on pci0
 pci2: <ACPI PCI bus> on pcib2
 uhci2: <Intel 82801I (ICH9) USB controller> port 0xff80-0xff9f irq 23 at
 device 29.0 on pci0
 uhci2: [ITHREAD]
 usbus3: <Intel 82801I (ICH9) USB controller> on uhci2
 uhci3: <Intel 82801I (ICH9) USB controller> port 0xff60-0xff7f irq 17 at
 device 29.1 on pci0
 uhci3: [ITHREAD]
 usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
 uhci4: <Intel 82801I (ICH9) USB controller> port 0xff40-0xff5f irq 18 at
 device 29.2 on pci0
 uhci4: [ITHREAD]
 usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
 ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xff980800-0xff980bff
 irq 23 at device 29.7 on pci0
 ehci1: [ITHREAD]
 usbus6: EHCI version 1.0
 usbus6: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
 pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
 pci3: <ACPI PCI bus> on pcib3
 isab0: <PCI-ISA bridge> at device 31.0 on pci0
 isa0: <ISA bus> on isab0
 ahci0: <Intel ICH9 AHCI SATA controller> port
 0xfe00-0xfe07,0xfe10-0xfe13,0xfe20-0xfe27,0xfe30-0xfe33,0xfec0-0xfedf mem
 0xff970000-0xff9707ff irq 18 at device 31.2 on pci0
 ahci0: [ITHREAD]
 ahci0: AHCI v1.20 with 6 3Gbps ports, Port Multiplier supported
 ahcich0: <AHCI channel> at channel 0 on ahci0
 ahcich0: [ITHREAD]
 ahcich1: <AHCI channel> at channel 1 on ahci0
 ahcich1: [ITHREAD]
 ahcich2: <AHCI channel> at channel 2 on ahci0
 ahcich2: [ITHREAD]
 ahcich3: <AHCI channel> at channel 3 on ahci0
 ahcich3: [ITHREAD]
 ahcich4: <AHCI channel> at channel 5 on ahci0
 ahcich4: [ITHREAD]
 pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
 atrtc0: <AT realtime clock> port 0x70-0x7f irq 8 on acpi0
 ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77f irq 7 on acpi0
 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
 ppc0: FIFO with 16/16/8 bytes threshold
 ppc0: [ITHREAD]
 ppbus0: <Parallel port bus> on ppc0
 plip0: <PLIP network interface> on ppbus0
 plip0: [ITHREAD]
 lpt0: <Printer> on ppbus0
 lpt0: [ITHREAD]
 lpt0: Interrupt-driven port
 ppi0: <Parallel I/O> on ppbus0
 uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
 uart0: [FILTER]
 orm0: <ISA Option ROMs> at iomem
 0xc0000-0xce7ff,0xce800-0xd07ff,0xd0800-0xd2fff,0xd3000-0xd3fff on isa0
 sc0: <System console> at flags 0x100 on isa0
 sc0: VGA <16 virtual consoles, flags=0x300>
 vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
 atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
 atkbd0: <AT Keyboard> irq 1 on atkbdc0
 kbd0 at atkbd0
 atkbd0: [GIANT-LOCKED]
 atkbd0: [ITHREAD]
 est0: <Enhanced SpeedStep Frequency Control> on cpu0
 est: CPU supports Enhanced Speedstep, but is not recognized.
 est: cpu_vendor GenuineIntel, msr 926092606000926
 device_attach: est0 attach returned 6
 p4tcc0: <CPU Frequency Thermal Control> on cpu0
 est1: <Enhanced SpeedStep Frequency Control> on cpu1
 est: CPU supports Enhanced Speedstep, but is not recognized.
 est: cpu_vendor GenuineIntel, msr 926092606000926
 device_attach: est1 attach returned 6
 p4tcc1: <CPU Frequency Thermal Control> on cpu1
 est2: <Enhanced SpeedStep Frequency Control> on cpu2
 est: CPU supports Enhanced Speedstep, but is not recognized.
 est: cpu_vendor GenuineIntel, msr 926092606000926
 device_attach: est2 attach returned 6
 p4tcc2: <CPU Frequency Thermal Control> on cpu2
 est3: <Enhanced SpeedStep Frequency Control> on cpu3
 est: CPU supports Enhanced Speedstep, but is not recognized.
 est: cpu_vendor GenuineIntel, msr 926092606000926
 device_attach: est3 attach returned 6
 p4tcc3: <CPU Frequency Thermal Control> on cpu3
 ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is
 present;
             to enable, add "vfs.zfs.prefetch_disable=0" to
 /boot/loader.conf.
 ZFS filesystem version 3
 ZFS storage pool version 14
 RTC BIOS diagnostic error 11<memory_size>
 Timecounters tick every 1.000 msec
 md0: Preloaded image </boot/mfsroot> 28672000 bytes at 0xffffffff81136258
 usbus0: 12Mbps Full Speed USB v1.0
 usbus1: 12Mbps Full Speed USB v1.0
 usbus2: 480Mbps High Speed USB v2.0
 usbus3: 12Mbps Full Speed USB v1.0
 usbus4: 12Mbps Full Speed USB v1.0
 usbus5: 12Mbps Full Speed USB v1.0
 usbus6: 480Mbps High Speed USB v2.0
 ugen0.1: <Intel> at usbus0
 uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
 ugen1.1: <Intel> at usbus1
 uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
 ugen2.1: <Intel> at usbus2
 uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
 ugen3.1: <Intel> at usbus3
 uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
 ugen4.1: <Intel> at usbus4
 uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
 ugen5.1: <Intel> at usbus5
 uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
 ugen6.1: <Intel> at usbus6
 uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
 ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
 ada0: <ST3250310AS 3.ADA> ATA-8 SATA 2.x device
 ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
 ada0: Command Queueing enabled
 ada0: 238418MB (488281250 512 byte sectors: 16H 63S/T 16383C)
 lapic1: Forcing LINT1 to edge trigger
 cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
 cd0: <TSSTcorp DVD+-RW TS-H653F D200> Removable CD-ROM SCSI-0 device
 cd0: 150.000MB/s transfersSMP: AP CPU #1 Launched! (
 lapicSA2T:A  Fo1rc.xin, g LINT1 to edge triggerUDMA5,
 ATAPI 12bytes, PIO 8192bytes)
 cd0: cd present [1781616 x 2048 byte records]
 SMP: AP CPU #2 Launched!
 lapic3: Forcing LINT1 to edge trigger
 SMP: AP CPU #3 Launched!
 uhub0: 2 ports with 2 removable, self powered
 uhub1: 2 ports with 2 removable, self powered
 uhub3: 2 ports with 2 removable, self powered
 uhub4: 2 ports with 2 removable, self powered
 uhub5: 2 ports with 2 removable, self powered
 Root mount waiting for: usbus6 usbus2
 uhub2: 6 ports with 6 removable, self powered
 uhub6: 6 ports with 6 removable, self powered
 Root mount waiting for: usbus6
 ugen4.2: <Dell> at usbus4
 ukbd0: <EP1 Interrupt> on usbus4
 kbd2 at ukbd0
 ugen6.2: <USB> at usbus6
 umass0: <USB Flash Disk, class 0/0, rev 2.00/2.00, addr 2> on usbus6
 umass0:  SCSI over Bulk-Only; quirks = 0x0000
 ugen4.3: <vendor 0x413c> at usbus4
 ums0: <vendor 0x413c Dell Premium USB Optical Mouse, class 0/0, rev
 2.00/0.09, addr 3> on usbus4
 ums0: 5 buttons and [XYZT] coordinates ID=0
 umass0:5:0:-1: Attached to scbus5
 Trying to mount root from ufs:/dev/ufs/ROOTFS
 da0 at umass-sim0 bus 0 scbus5 target 0 lun 0
 da0: <Simple Flash Disk 2.0 2.00> Removable Direct Access SCSI-2 device
 da0: 40.000MB/s transfers
 da0: 1991MB (4077568 512 byte sectors: 255H 63S/T 253C)
 GEOM: da0: partition 1 does not start on a track boundary.
 GEOM: da0: partition 1 does not end on a track boundary.
 md7.uzip: 19006 x 65536 blocks
 /tmp: optimization changed from SPACE to TIME
 em0: link state changed to DOWN
 em0: link state changed to UP

 # DISK INFO ada0
 /dev/ada0
 /dev/ada0s1
 /dev/ada0s2
 /dev/ada0s2a
 /dev/ada0s2d
 /dev/ada0s2e
 /dev/ada0s2f
 /dev/ada0s3
 /dev/ada0s3a
 /dev/ada0s3b
 =>       63  488281185  ada0  MBR  (233G)
          63   20980827     1  !12  (10G)
    20980890   31455270     2  freebsd  (15G)
    52436160  435843072     3  freebsd  [active]  (208G)
   488279232       2016        - free -  (1.0M)


 # DISK INFO da0
 /dev/da0
 /dev/da0s1
 =>     63  4077486  da0  MBR  (1.9G)
        63  4077486       - free -  (1.9G)


 # MOUNT OUTPUT
 /dev/ufs/ROOTFS on / (ufs, local)
 devfs on /dev (devfs, local, multilabel)
 /dev/md6 on /tmp (ufs, local)
 /dev/md2 on /uzip (ufs, local)
 /dev/md7.uzip on /usr (ufs, local, read-only)
 /root/SysInstaller on /usr/PCBSD/SysInstaller (nullfs, local)
 /root/pc-sysinstall on /usr/PCBSD/pc-sysinstall (nullfs, local)
 /dev/da0s1 on /root/mnt (msdosfs, local)

-- 
Ticket URL: <https://trac.pcbsd.org/ticket/291#comment:8>
PC-BSD <http://trac.pcbsd.org>
PC-BSD Project Management


More information about the Trac-bugs mailing list