Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-STABLE #12: Wed May 30 11:16:35 PDT 2012
   
root@build9x64.pcbsd.org:/usr/obj/builds/amd64/pcbsd-build90/fbsd-source/9.0/sys
/GENERIC amd64
CPU: Intel(R) Core(TM)2 Duo CPU     E6550  @ 2.33GHz (2327.55-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x6fb  Family = 6  Model = f  Stepping = 11
 
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,
CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0xe3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 4299161600 (4100 MB)
avail memory = 4016369664 (3830 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <COMPAQ BEARLAKE>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 1
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
aesni0: No AESNI support.
acpi0: <HPQOEM SLIC-BPC> on motherboard
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, dff00000 (3) failed
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
attimer0: <AT timer> port 0x40-0x43 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
Event timer "RTC" frequency 32768 Hz quality 0
hpet1: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
device_attach: hpet0 attach returned 12
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x2230-0x2237 mem
0xf0100000-0xf017ffff,0xe0000000-0xefffffff,0xf0000000-0xf00fffff irq 16 at
device 2.0 on pci0
agp0: <Intel Q35 SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 6140k stolen memory
pci0: <simple comms> at device 3.0 (no driver attached)
atapci0: <Intel ATA controller> port
0x2238-0x223f,0x2270-0x2273,0x2240-0x2247,0x2274-0x2277,0x21e0-0x21ef irq 18 at
device 3.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
pci0: <simple comms, UART> at device 3.3 (no driver attached)
em0: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0x2100-0x211f mem
0xf0180000-0xf019ffff,0xf01a5000-0xf01a5fff irq 19 at device 25.0 on pci0
em0: Using an MSI interrupt
em0: Ethernet address: 00:21:5a:c7:2b:9a
uhci0: <Intel 82801I (ICH9) USB controller> port 0x2120-0x213f irq 20 at device
26.0 on pci0
usbus0 on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x2140-0x215f irq 21 at device
26.1 on pci0
usbus1 on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0x2160-0x217f irq 22 at device
26.2 on pci0
usbus2 on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf01a6000-0xf01a63ff irq 22
at device 26.7 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
hdac0: <Intel 82801I HDA Controller> mem 0xf01a0000-0xf01a3fff irq 21 at device
27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 20 at device 28.0 on pci0
pci32: <ACPI PCI bus> on pcib1
em1: <Intel(R) PRO/1000 Network Connection 7.3.2> port 0x1100-0x111f mem
0xf0280000-0xf029ffff,0xf0200000-0xf027ffff,0xf02a0000-0xf02a3fff irq 16 at
device 0.0 on pci32
em1: Using MSIX interrupts with 3 vectors
em1: Ethernet address: 68:05:ca:01:33:75
pcib2: <ACPI PCI-PCI bridge> irq 21 at device 28.1 on pci0
pci48: <ACPI PCI bus> on pcib2
uhci3: <Intel 82801I (ICH9) USB controller> port 0x2180-0x219f irq 20 at device
29.0 on pci0
usbus4 on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0x21a0-0x21bf irq 21 at device
29.1 on pci0
usbus5 on uhci4
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xf01a6400-0xf01a67ff irq 20
at device 29.7 on pci0
usbus6: EHCI version 1.0
usbus6 on ehci1
pcib3: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci7: <ACPI PCI bus> on pcib3
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci1: <Intel ICH9 SATA300 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x21f0-0x21ff,0x2200-0x220f irq 18 at device
31.2 on pci0
ata0: <ATA channel> at channel 0 on atapci1
ata1: <ATA channel> at channel 1 on atapci1
atapci2: <Intel ICH9 SATA300 controller> port
0x2260-0x2267,0x2280-0x2283,0x2268-0x226f,0x2284-0x2287,0x2210-0x221f,0x2220-
0x222f irq 18 at device 31.5 on pci0
ata4: <ATA channel> at channel 0 on atapci2
ata5: <ATA channel> at channel 1 on atapci2
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: <Parallel port> port 0x378-0x37f,0x778-0x77d irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/13 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ctl: CAM Target Layer loaded
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version 5
ZFS storage pool version 28
Timecounters tick every 1.000 msec
hdacc0: <Analog Devices AD1884 HDA CODEC> at cad 0 on hdac0
hdaa0: <Analog Devices AD1884 HDA CODEC Audio Function Group> at nid 1 on hdacc0
pcm0: <Analog Devices AD1884 HDA CODEC PCM (Rear Analog)> at nid 18 and 21 on
hdaa0
pcm1: <Analog Devices AD1884 HDA CODEC PCM (Front Analog)> at nid 17 and 20 on
hdaa0
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub6: 4 ports with 4 removable, self powered
uhub3: 6 ports with 6 removable, self powered
usbd_set_config_index: could not read device status: USB_ERR_SHORT_XFER
ugen3.2: <BUSLink> at usbus3
umass0: <MSC Bulk-Only Transfer> on usbus3
umass0:  SCSI over Bulk-Only; quirks = 0x4100
umass0:7:0:-1: Attached to scbus7
ugen5.2: <IMATION> at usbus5
umass1: <IMATION APOLLO EXTERNAL HDD, class 0/0, rev 2.00/0.30, addr 2> on
usbus5
umass1:  SCSI over Bulk-Only; quirks = 0x4100
umass1:8:1:-1: Attached to scbus8
ugen2.2: <Mitsumi Electric> at usbus2
uhub7: <Mitsumi Electric Hub in Apple Extended USB Keyboard, class 9/0, rev
1.10/4.10, addr 2> on usbus2
uhub7: 3 ports with 2 removable, bus powered
da0 at umass-sim0 bus 0 scbus7 target 0 lun 0
da0: <Hitachi HDS721010CLA332 > Fixed Direct Access SCSI-2 device 
da0: 40.000MB/s transfers
da0: 953869MB (1953525168 512 byte sectors: 255H 63S/T 121601C)
cd0 at ata1 bus 0 scbus3 target 0 lun 0
cd0: <TSSTcorp CDDVDW TS-H653Q HC01> Removable CD-ROM SCSI-0 device 
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray
closed
ada0 at ata0 bus 0 scbus2 target 0 lun 0
ada0: <SAMSUNG SP2504C VT100-50> ATA-7 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad0
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 9091982 Hz quality 1000
da1 at umass-sim1 bus 1 scbus8 target 0 lun 0
da1: <SAMSUNG HM500LI 2TF0> Fixed Direct Access SCSI-0 device 
da1: 1.000MB/s transfers
da1: 476940MB (976773168 512 byte sectors: 255H 63S/T 60801C)
ugen2.3: <Mitsumi Electric> at usbus2
ukbd0: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev 1.10/4.10,
addr 3> on usbus2
kbd2 at ukbd0
uhid0: <Mitsumi Electric Apple Extended USB Keyboard, class 0/0, rev 1.10/4.10,
addr 3> on usbus2
ugen2.4: <Primax> at usbus2
ums0: <Primax Kensington Eagle Trackball, class 0/0, rev 2.00/6.00, addr 4> on
usbus2
ums0: 3 buttons and [XYZT] coordinates ID=0
Trying to mount root from zfs:tank0 []...
drm0: <Intel Q35> on vgapci0
info: [drm] MSI enabled 1 message(s)
info: [drm] AGP at 0xe0000000 256MB
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iic1: <I2C generic I/O> on iicbus1
iicbus2: <Philips I2C bus> on iicbb1 addr 0xff
iic2: <I2C generic I/O> on iicbus2
iic3: <I2C generic I/O> on iicbus3
iicbus4: <Philips I2C bus> on iicbb2 addr 0xff
iic4: <I2C generic I/O> on iicbus4
iic5: <I2C generic I/O> on iicbus5
iicbus6: <Philips I2C bus> on iicbb3 addr 0xff
iic6: <I2C generic I/O> on iicbus6
iic7: <I2C generic I/O> on iicbus7
iicbus8: <Philips I2C bus> on iicbb4 addr 0xff
iic8: <I2C generic I/O> on iicbus8
iic9: <I2C generic I/O> on iicbus9
iicbus10: <Philips I2C bus> on iicbb5 addr 0xff
iic10: <I2C generic I/O> on iicbus10
iic11: <I2C generic I/O> on iicbus11
iicbus12: <Philips I2C bus> on iicbb6 addr 0xff
iic12: <I2C generic I/O> on iicbus12
iic13: <I2C generic I/O> on iicbus13
iicbus14: <Philips I2C bus> on iicbb7 addr 0xff
iic14: <I2C generic I/O> on iicbus14
iic15: <I2C generic I/O> on iicbus15
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
[drm:KMS:pid350:intel_detect_pch] No PCH detected
[drm:KMS:pid350:init_vbt_defaults] Set default to SSC at 100MHz
[drm:KMS:pid350:intel_parse_bios] Using VBT from OpRegion: $VBT BEARLAKE-B     d
[drm:KMS:pid350:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 1
int_crt_support 1 lvds_use_ssc 0 lvds_ssc_freq 96 display_clock_mode 0
[drm:KMS:pid350:parse_general_definitions] crt_ddc_bus_pin: 2
[drm:KMS:pid350:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000
1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[drm:KMS:pid350:parse_sdvo_device_mapping] No SDVO device info is found in VBT
[drm:KMS:pid350:parse_device_mapping] no child dev is parsed from VBT
[drm:KMS:pid350:intel_modeset_init] 2 display pipes available.
[drm:KMS:pid350:intel_modeset_init] plane 0 init failed: -19
[drm:KMS:pid350:intel_modeset_init] plane 1 init failed: -19
[drm:KMS:pid350:intel_update_fbc] 
[drm:KMS:pid350:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:KMS:pid350:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:KMS:pid350:i9xx_update_wm] FIFO watermarks - A: 26, B: 29
[drm:KMS:pid350:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 29, C: 2, SR
1
[drm:KMS:pid350:i9xx_update_wm] memory self refresh disabled
[drm:KMS:pid350:intel_update_fbc] 
[drm:KMS:pid350:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:KMS:pid350:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:KMS:pid350:i9xx_update_wm] FIFO watermarks - A: 26, B: 29
[drm:KMS:pid350:i9xx_update_wm] Setting FIFO watermarks - A: 26, B: 29, C: 2, SR
1
[drm:KMS:pid350:i9xx_update_wm] memory self refresh disabled
drm0: taking over the fictitious range 0xe0000000-0xf0000000
info: [drm] initialized overlay support
[drm:KMS:pid350:drm_helper_probe_single_connector_modes] [CONNECTOR:5:VGA-1]
[drm:KMS:pid0:i915_hotplug_work_func] running encoder hotplug functions
[drm:KMS:pid350:intel_crt_detect] CRT detected via hotplug
[drm:KMS:pid350:drm_edid_to_eld] ELD: no CEA Extension found
[drm:KMS:pid350:drm_helper_probe_single_connector_modes] [CONNECTOR:5:VGA-1]
probed modes :
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 17:"640x480" 60 25200 640
656 752 800 480 490 492 525 0x40 0xa
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 12:"1440x900" 60 106500
1440 1520 1672 1904 900 903 909 934 0x40 0x6
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 16:"800x600" 56 36000 800
824 896 1024 600 601 603 625 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 18:"1024x768" 60 65000
1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 13:"1600x1200" 60 162000
1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 11:"1280x1024" 60 108000
1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 8:"1920x1080" 60 148500
1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 14:"1680x1050" 60 146250
1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 15:"800x600" 60 40000 800
840 968 1056 600 601 605 628 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 9:"1280x800" 60 83500
1280 1352 1480 1680 800 803 809 831 0x40 0x9
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 10:"1280x960" 60 108000
1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:KMS:pid350:drm_setup_crtcs] 
[drm:KMS:pid350:drm_enable_connectors] connector 5 enabled? yes
[drm:KMS:pid350:drm_target_preferred] looking for cmdline mode on connector 5
[drm:KMS:pid350:drm_target_preferred] looking for preferred mode on connector 5
[drm:KMS:pid350:drm_target_preferred] found mode 1920x1080
[drm:KMS:pid350:drm_setup_crtcs] picking CRTCs for 4096x4096 config
[drm:KMS:pid350:drm_setup_crtcs] desired mode 1920x1080 set on crtc 3
[drm:KMS:pid350:intelfb_create] allocated 1920x1080 fb: 0x00030000, bo
0xfffffe0039510400
info: [drm] Initialized i915 1.6.0 20080730
[drm:KMS:pid350:drm_mode_getresources] CRTC[2] CONNECTORS[1] ENCODERS[1]
[drm:KMS:pid350:drm_mode_getresources] [CRTC:3]
[drm:KMS:pid350:drm_mode_getresources] [CRTC:4]
[drm:KMS:pid350:drm_mode_getresources] [ENCODER:6:DAC-6]
[drm:KMS:pid350:drm_mode_getresources] [CONNECTOR:5:VGA-1]
[drm:KMS:pid350:drm_mode_getresources] CRTC[2] CONNECTORS[1] ENCODERS[1]
[drm:KMS:pid350:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:KMS:pid350:drm_helper_probe_single_connector_modes] [CONNECTOR:5:VGA-1]
[drm:KMS:pid350:intel_crt_detect] CRT detected via hotplug
[drm:KMS:pid350:drm_edid_to_eld] ELD: no CEA Extension found
[drm:KMS:pid350:drm_helper_probe_single_connector_modes] [CONNECTOR:5:VGA-1]
probed modes :
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 13:"1600x1200" 60 162000
1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 17:"640x480" 60 25200 640
656 752 800 480 490 492 525 0x40 0xa
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 14:"1680x1050" 60 146250
1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 8:"1920x1080" 60 148500
1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 10:"1280x960" 60 108000
1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 18:"1024x768" 60 65000
1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 9:"1280x800" 60 83500
1280 1352 1480 1680 800 803 809 831 0x40 0x9
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 11:"1280x1024" 60 108000
1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 12:"1440x900" 60 106500
1440 1520 1672 1904 900 903 909 934 0x40 0x6
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 16:"800x600" 56 36000 800
824 896 1024 600 601 603 625 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 15:"800x600" 60 40000 800
840 968 1056 600 601 605 628 0x40 0x5
[drm:KMS:pid350:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:KMS:pid350:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:KMS:pid350:drm_helper_probe_single_connector_modes] [CONNECTOR:5:VGA-1]
[drm:KMS:pid350:intel_crt_detect] CRT detected via hotplug
[drm:KMS:pid350:drm_edid_to_eld] ELD: no CEA Extension found
[drm:KMS:pid350:drm_helper_probe_single_connector_modes] [CONNECTOR:5:VGA-1]
probed modes :
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 9:"1280x800" 60 83500
1280 1352 1480 1680 800 803 809 831 0x40 0x9
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 15:"800x600" 60 40000 800
840 968 1056 600 601 605 628 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 16:"800x600" 56 36000 800
824 896 1024 600 601 603 625 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 8:"1920x1080" 60 148500
1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 10:"1280x960" 60 108000
1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 13:"1600x1200" 60 162000
1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 18:"1024x768" 60 65000
1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 17:"640x480" 60 25200 640
656 752 800 480 490 492 525 0x40 0xa
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 14:"1680x1050" 60 146250
1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 12:"1440x900" 60 106500
1440 1520 1672 1904 900 903 909 934 0x40 0x6
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 11:"1280x1024" 60 108000
1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:KMS:pid350:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:KMS:pid350:drm_mode_addfb] [FB:21]
[drm:KMS:pid350:drm_mode_setcrtc] [CRTC:3]
[drm:KMS:pid350:drm_mode_setcrtc] [CONNECTOR:5:VGA-1]
[drm:KMS:pid350:drm_crtc_helper_set_config] 
[drm:KMS:pid350:drm_crtc_helper_set_config] [CRTC:3] [FB:21] #connectors=1 (x y)
(0 0)
[drm:KMS:pid350:drm_crtc_helper_set_config] crtc has no fb, full mode set
[drm:KMS:pid350:drm_crtc_helper_set_config] modes are different, full mode set
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0
0x0 0x0
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 22:"1920x1080" 0 148500
1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5
[drm:KMS:pid350:drm_crtc_helper_set_config] encoder changed, full mode switch
[drm:KMS:pid350:drm_crtc_helper_set_config] crtc changed, full mode switch
[drm:KMS:pid350:drm_crtc_helper_set_config] [CONNECTOR:5:VGA-1] to [CRTC:3]
[drm:KMS:pid350:drm_crtc_helper_set_config] attempting to set mode from
userspace
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 22:"1920x1080" 0 148500
1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5
[drm:KMS:pid350:drm_crtc_helper_set_mode] [CRTC:3]
[drm:KMS:pid350:i9xx_crtc_mode_set] Mode for pipe A:
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 22:"1920x1080" 0 148500
1920 2008 2052 2200 1080 1084 1089 1125 0x0 0x5
[drm:KMS:pid350:i9xx_update_plane] Writing base 01000000 00000000 0 0 8192
[drm:KMS:pid350:intel_update_fbc] 
[drm:KMS:pid350:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:KMS:pid350:intel_calculate_wm] FIFO entries required for mode: 47
[drm:KMS:pid350:intel_calculate_wm] FIFO watermark level: -21
[drm:KMS:pid350:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:KMS:pid350:i9xx_update_wm] FIFO watermarks - A: 1, B: 29
[drm:KMS:pid350:i9xx_update_wm] self-refresh entries: 120
[drm:KMS:pid350:i9xx_update_wm] Setting FIFO watermarks - A: 1, B: 29, C: 2, SR
1
[drm:KMS:pid350:i9xx_update_wm] memory self refresh enabled
[drm:KMS:pid350:drm_crtc_helper_set_mode] [ENCODER:6:DAC-6] set
[MODE:22:1920x1080]
[drm:KMS:pid350:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:KMS:pid350:intel_calculate_wm] FIFO entries required for mode: 47
[drm:KMS:pid350:intel_calculate_wm] FIFO watermark level: -21
[drm:KMS:pid350:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:KMS:pid350:i9xx_update_wm] FIFO watermarks - A: 1, B: 29
[drm:KMS:pid350:i9xx_update_wm] self-refresh entries: 120
[drm:KMS:pid350:i9xx_update_wm] Setting FIFO watermarks - A: 1, B: 29, C: 2, SR
1
[drm:KMS:pid350:i9xx_update_wm] memory self refresh enabled
[drm:KMS:pid350:intel_update_fbc] 
[drm:KMS:pid350:drm_crtc_helper_set_config] Setting connector DPMS state to on
[drm:KMS:pid350:drm_crtc_helper_set_config] 	[CONNECTOR:5:VGA-1] set DPMS on
[drm:KMS:pid350:intel_crtc_cursor_set] 
[drm:KMS:pid350:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:KMS:pid350:drm_helper_probe_single_connector_modes] [CONNECTOR:5:VGA-1]
[drm:KMS:pid350:intel_crt_detect] CRT detected via hotplug
[drm:KMS:pid350:drm_edid_to_eld] ELD: no CEA Extension found
[drm:KMS:pid350:drm_helper_probe_single_connector_modes] [CONNECTOR:5:VGA-1]
probed modes :
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 10:"1280x960" 60 108000
1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 13:"1600x1200" 60 162000
1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 17:"640x480" 60 25200 640
656 752 800 480 490 492 525 0x40 0xa
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 18:"1024x768" 60 65000
1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 9:"1280x800" 60 83500
1280 1352 1480 1680 800 803 809 831 0x40 0x9
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 8:"1920x1080" 60 148500
1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 12:"1440x900" 60 106500
1440 1520 1672 1904 900 903 909 934 0x40 0x6
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 11:"1280x1024" 60 108000
1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 15:"800x600" 60 40000 800
840 968 1056 600 601 605 628 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 16:"800x600" 56 36000 800
824 896 1024 600 601 603 625 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 14:"1680x1050" 60 146250
1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[drm:KMS:pid350:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:KMS:pid350:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:KMS:pid350:drm_helper_probe_single_connector_modes] [CONNECTOR:5:VGA-1]
[drm:KMS:pid350:intel_crt_detect] CRT detected via hotplug
[drm:KMS:pid350:drm_edid_to_eld] ELD: no CEA Extension found
[drm:KMS:pid350:drm_helper_probe_single_connector_modes] [CONNECTOR:5:VGA-1]
probed modes :
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 9:"1280x800" 60 83500
1280 1352 1480 1680 800 803 809 831 0x40 0x9
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 8:"1920x1080" 60 148500
1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 11:"1280x1024" 60 108000
1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 12:"1440x900" 60 106500
1440 1520 1672 1904 900 903 909 934 0x40 0x6
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 18:"1024x768" 60 65000
1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 15:"800x600" 60 40000 800
840 968 1056 600 601 605 628 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 16:"800x600" 56 36000 800
824 896 1024 600 601 603 625 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 10:"1280x960" 60 108000
1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 13:"1600x1200" 60 162000
1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 17:"640x480" 60 25200 640
656 752 800 480 490 492 525 0x40 0xa
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 14:"1680x1050" 60 146250
1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[drm:KMS:pid350:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:KMS:pid350:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:KMS:pid350:drm_helper_probe_single_connector_modes] [CONNECTOR:5:VGA-1]
[drm:KMS:pid350:intel_crt_detect] CRT detected via hotplug
[drm:KMS:pid350:drm_edid_to_eld] ELD: no CEA Extension found
[drm:KMS:pid350:drm_helper_probe_single_connector_modes] [CONNECTOR:5:VGA-1]
probed modes :
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 18:"1024x768" 60 65000
1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 9:"1280x800" 60 83500
1280 1352 1480 1680 800 803 809 831 0x40 0x9
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 14:"1680x1050" 60 146250
1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 16:"800x600" 56 36000 800
824 896 1024 600 601 603 625 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 12:"1440x900" 60 106500
1440 1520 1672 1904 900 903 909 934 0x40 0x6
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 13:"1600x1200" 60 162000
1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 17:"640x480" 60 25200 640
656 752 800 480 490 492 525 0x40 0xa
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 15:"800x600" 60 40000 800
840 968 1056 600 601 605 628 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 8:"1920x1080" 60 148500
1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 11:"1280x1024" 60 108000
1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 10:"1280x960" 60 108000
1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:KMS:pid350:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:KMS:pid350:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:KMS:pid350:drm_helper_probe_single_connector_modes] [CONNECTOR:5:VGA-1]
[drm:KMS:pid350:intel_crt_detect] CRT detected via hotplug
[drm:KMS:pid350:drm_edid_to_eld] ELD: no CEA Extension found
[drm:KMS:pid350:drm_helper_probe_single_connector_modes] [CONNECTOR:5:VGA-1]
probed modes :
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 13:"1600x1200" 60 162000
1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 17:"640x480" 60 25200 640
656 752 800 480 490 492 525 0x40 0xa
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 16:"800x600" 56 36000 800
824 896 1024 600 601 603 625 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 8:"1920x1080" 60 148500
1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 12:"1440x900" 60 106500
1440 1520 1672 1904 900 903 909 934 0x40 0x6
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 15:"800x600" 60 40000 800
840 968 1056 600 601 605 628 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 11:"1280x1024" 60 108000
1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 18:"1024x768" 60 65000
1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 10:"1280x960" 60 108000
1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 9:"1280x800" 60 83500
1280 1352 1480 1680 800 803 809 831 0x40 0x9
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 14:"1680x1050" 60 146250
1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[drm:KMS:pid350:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:KMS:pid0:intel_crt_detect] CRT detected via hotplug
[drm:KMS:pid0:output_poll_execute] [CONNECTOR:5:VGA-1] status updated from 1 to
1
Cuse4BSD v0.1.23 @ /dev/cuse
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
[drm:KMS:pid350:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:KMS:pid350:drm_helper_probe_single_connector_modes] [CONNECTOR:5:VGA-1]
[drm:KMS:pid350:intel_crt_detect] CRT detected via hotplug
[drm:KMS:pid350:drm_edid_to_eld] ELD: no CEA Extension found
[drm:KMS:pid350:drm_helper_probe_single_connector_modes] [CONNECTOR:5:VGA-1]
probed modes :
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 15:"800x600" 60 40000 800
840 968 1056 600 601 605 628 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 18:"1024x768" 60 65000
1024 1048 1184 1344 768 771 777 806 0x40 0xa
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 16:"800x600" 56 36000 800
824 896 1024 600 601 603 625 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 11:"1280x1024" 60 108000
1280 1328 1440 1688 1024 1025 1028 1066 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 12:"1440x900" 60 106500
1440 1520 1672 1904 900 903 909 934 0x40 0x6
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 8:"1920x1080" 60 148500
1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 9:"1280x800" 60 83500
1280 1352 1480 1680 800 803 809 831 0x40 0x9
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 10:"1280x960" 60 108000
1280 1376 1488 1800 960 961 964 1000 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 13:"1600x1200" 60 162000
1600 1664 1856 2160 1200 1201 1204 1250 0x40 0x5
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 14:"1680x1050" 60 146250
1680 1784 1960 2240 1050 1053 1059 1089 0x40 0x6
[drm:KMS:pid350:drm_mode_debug_printmodeline] Modeline 17:"640x480" 60 25200 640
656 752 800 480 490 492 525 0x40 0xa
[drm:KMS:pid350:drm_mode_getconnector] [CONNECTOR:5:?]
[drm:KMS:pid0:intel_crt_detect] CRT detected via hotplug
[drm:KMS:pid0:output_poll_execute] [CONNECTOR:5:VGA-1] status updated from 1 to
1
[drm:KMS:pid350:intel_update_fbc] 
[drm:KMS:pid350:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:KMS:pid350:intel_calculate_wm] FIFO entries required for mode: 47
[drm:KMS:pid350:intel_calculate_wm] FIFO watermark level: -21
[drm:KMS:pid350:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:KMS:pid350:i9xx_update_wm] FIFO watermarks - A: 1, B: 29
[drm:KMS:pid350:i9xx_update_wm] self-refresh entries: 120
[drm:KMS:pid350:i9xx_update_wm] Setting FIFO watermarks - A: 1, B: 29, C: 2, SR
1
[drm:KMS:pid350:i9xx_update_wm] memory self refresh enabled
[drm:KMS:pid350:i9xx_get_fifo_size] FIFO size - (0x00001d9c) A: 28
[drm:KMS:pid350:intel_calculate_wm] FIFO entries required for mode: 47
[drm:KMS:pid350:intel_calculate_wm] FIFO watermark level: -21
[drm:KMS:pid350:i9xx_get_fifo_size] FIFO size - (0x00001d9c) B: 31
[drm:KMS:pid350:i9xx_update_wm] FIFO watermarks - A: 1, B: 29
[drm:KMS:pid350:i9xx_update_wm] self-refresh entries: 120
[drm:KMS:pid350:i9xx_update_wm] Setting FIFO watermarks - A: 1, B: 29, C: 2, SR
1
[drm:KMS:pid350:i9xx_update_wm] memory self refresh enabled
[drm:KMS:pid350:intel_update_fbc] 
[drm:KMS:pid350:intel_crtc_cursor_set] 
[drm:KMS:pid350:intel_crtc_cursor_set] cursor off
[drm:KMS:pid350:intel_crtc_cursor_set] 
[drm:KMS:pid350:intel_crtc_cursor_set] 
[drm:KMS:pid350:intel_crtc_cursor_set] cursor off