PC-BSD 1.4 Diagnostic Sheet
Generated: Fri Sep 14 22:40:27 BST 2007

-----------------Dmesg Output-------------------------

Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #0: Fri Sep  7 01:31:20 UTC 2007
    root@pcbsd:/usr/obj/usr/src/sys/PCBSD.i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3200+ (2200.10-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0xfc0  Stepping = 0
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory  = 1072889856 (1023 MB)
avail memory = 1032343552 (984 MB)
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: invalid _PSS package
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 8380 host to PCI bridge> mem 0xde000000-0xdfffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <simple comms> at device 13.0 (no driver attached)
atapci0: <VIA 6420 SATA150 controller> port 0xe400-0xe407,0xe000-0xe003,0xd800-0xd807,0xd400-0xd403,0xd000-0xd00f,0xc800-0xc8ff irq 10 at device 15.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 11 at device 16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 11 at device 16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xc000-0xc01f irq 10 at device 16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 10 at device 16.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xf9c00000-0xf9c000ff irq 5 at device 16.4 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ugen0: vendor 0x0c45 USB20 Camera, rev 2.00/1.00, addr 2
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pci0: <multimedia, audio> at device 17.5 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xa800-0xa8ff mem 0xf9b00000-0xf9b000ff irq 11 at device 18.0 on pci0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:11:d8:c5:92:84
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model MouseMan+, device ID 0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xcf000-0xd2fff,0xd3000-0xd4fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uscanner0: Hewlett-Packard HP ScanJet 6300C, rev 1.00/1.00, addr 2
ulpt0: hp deskjet 5550, rev 2.00/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
Timecounter "TSC" frequency 2200101823 Hz quality 800
Timecounters tick every 1.000 msec
md0: Preloaded image </boot/mfsroot> 9437184 bytes at 0xc0a0090cad0: DMA limited to UDMA33, device found non-ATA66 cable

ad0: 29325MB <Maxtor 2F030J0 VAM51JJ0> at ata0-master UDMA33
acd0: DMA limited to UDMA33, device found non-ATA66 cable
acd0: DVDR <SONY DVD RW DW-Q28A/KYS1> at ata1-master UDMA33
acd1: CDRW <SONY CD-RW CRX230ED/4YS1> at ata1-slave UDMA33
ad1: 239372MB <Maxtor 6L250S0 BANC1E00> at ata2-master SATA150
Trying to mount root from ufs:/dev/md0
md3.uzip: 6021 x 65536 blocks
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 done
All buffers synced.
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #70: Wed Sep  5 10:35:27 PDT 2007
    root@pcbsd:/usr/obj/usr/src/sys/PCBSD
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3200+ (2200.10-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0xfc0  Stepping = 0
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory  = 1072889856 (1023 MB)
avail memory = 1036705792 (988 MB)
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: invalid _PSS package
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 8380 host to PCI bridge> mem 0xde000000-0xdfffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <simple comms> at device 13.0 (no driver attached)
atapci0: <VIA 6420 SATA150 controller> port 0xe400-0xe407,0xe000-0xe003,0xd800-0xd807,0xd400-0xd403,0xd000-0xd00f,0xc800-0xc8ff irq 10 at device 15.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 11 at device 16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 11 at device 16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xc000-0xc01f irq 10 at device 16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 10 at device 16.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xf9c00000-0xf9c000ff irq 5 at device 16.4 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ugen0: vendor 0x0c45 USB20 Camera, rev 2.00/1.00, addr 2
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pci0: <multimedia, audio> at device 17.5 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xa800-0xa8ff mem 0xf9b00000-0xf9b000ff irq 11 at device 18.0 on pci0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:11:d8:c5:92:84
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model MouseMan+, device ID 0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xcf000-0xd2fff,0xd3000-0xd4fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uscanner0: Hewlett-Packard HP ScanJet 6300C, rev 1.00/1.00, addr 2
ulpt0: hp deskjet 5550, rev 2.00/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
Timecounter "TSC" frequency 2200102438 Hz quality 800
Timecounters tick every 1.000 msec
ad0: DMA limited to UDMA33, device found non-ATA66 cable
ad0: 29325MB <Maxtor 2F030J0 VAM51JJ0> at ata0-master UDMA33
acd0: DMA limited to UDMA33, device found non-ATA66 cable
acd0: DVDR <SONY DVD RW DW-Q28A/KYS1> at ata1-master UDMA33
acd1: CDRW <SONY CD-RW CRX230ED/4YS1> at ata1-slave UDMA33
ad1: 239372MB <Maxtor 6L250S0 BANC1E00> at ata2-master SATA150
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
cd1 at ata1 bus 0 target 1 lun 0
cd1: <SONY CD-RW  CRX230ED 4YS1> Removable CD-ROM SCSI-0 device 
cd1: 33.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
cd0 at ata1 bus 0 target 0 lun 0
cd0: <SONY DVD RW DW-Q28A KYS1> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad1s4a
pcm0: <VIA VT8237> port 0xb000-0xb0ff irq 5 at device 17.5 on pci0
pcm0: <Avance Logic ALC655 AC97 Codec>
pcm0: <VIA DXS Enabled: DXS 4 / SGD 1 / REC 1>
umass0: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01, addr 3
umass0: Get Max Lun not supported (STALLED)
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <WDC WD20 00BB-22GUC0 \\0000\\0000> Fixed Direct Access SCSI-0 device 
da0: 40.000MB/s transfers
da0: 190782MB (390721968 512 byte sectors: 255H 63S/T 24321C)
Disk too big, try '-o large' mount option
Disk too big, try '-o large' mount option
Disk too big, try '-o large' mount option
Disk too big, try '-o large' mount option
Disk too big, try '-o large' mount option
Disk too big, try '-o large' mount option
Disk too big, try '-o large' mount option
umass0: at uhub4 port 5 (addr 3) disconnected
(da0:umass-sim0:0:0:0): lost device
(da0:umass-sim0:0:0:0): removing device entry
umass0: detached
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...2 1 1 0 0 done
All buffers synced.
Uptime: 51m7s
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #0: Fri Sep  7 01:31:20 UTC 2007
    root@pcbsd:/usr/obj/usr/src/sys/PCBSD.i386
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3200+ (2200.10-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0xfc0  Stepping = 0
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory  = 1072889856 (1023 MB)
avail memory = 1032343552 (984 MB)
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: invalid _PSS package
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 8380 host to PCI bridge> mem 0xde000000-0xdfffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <simple comms> at device 13.0 (no driver attached)
atapci0: <VIA 6420 SATA150 controller> port 0xe400-0xe407,0xe000-0xe003,0xd800-0xd807,0xd400-0xd403,0xd000-0xd00f,0xc800-0xc8ff irq 10 at device 15.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 11 at device 16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 11 at device 16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xc000-0xc01f irq 10 at device 16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 10 at device 16.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xf9c00000-0xf9c000ff irq 5 at device 16.4 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ugen0: vendor 0x0c45 USB20 Camera, rev 2.00/1.00, addr 2
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pci0: <multimedia, audio> at device 17.5 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xa800-0xa8ff mem 0xf9b00000-0xf9b000ff irq 11 at device 18.0 on pci0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:11:d8:c5:92:84
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model MouseMan+, device ID 0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xcf000-0xd2fff,0xd3000-0xd4fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uscanner0: Hewlett-Packard HP ScanJet 6300C, rev 1.00/1.00, addr 2
ulpt0: hp deskjet 5550, rev 2.00/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
Timecounter "TSC" frequency 2200101821 Hz quality 800
Timecounters tick every 1.000 msec
md0: Preloaded image </boot/mfsroot> 9437184 bytes at 0xc0a0090cad0: DMA limited to UDMA33, device found non-ATA66 cable

ad0: 29325MB <Maxtor 2F030J0 VAM51JJ0> at ata0-master UDMA33
acd0: DMA limited to UDMA33, device found non-ATA66 cable
acd0: DVDR <SONY DVD RW DW-Q28A/KYS1> at ata1-master UDMA33
acd1: CDRW <SONY CD-RW CRX230ED/4YS1> at ata1-slave UDMA33
ad1: 239372MB <Maxtor 6L250S0 BANC1E00> at ata2-master SATA150
Trying to mount root from ufs:/dev/md0
md3.uzip: 6021 x 65536 blocks
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done
Waiting (max 60 seconds) for system process `syncer' to stop...
Syncing disks, vnodes remaining...0 0 done
All buffers synced.
Copyright (c) 1992-2007 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 6.2-STABLE #70: Wed Sep  5 10:35:27 PDT 2007
    root@pcbsd:/usr/obj/usr/src/sys/PCBSD
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 Processor 3200+ (2200.10-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0xfc0  Stepping = 0
  Features=0x78bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2>
  AMD Features=0xe0500800<SYSCALL,NX,MMX+,LM,3DNow+,3DNow>
real memory  = 1072889856 (1023 MB)
avail memory = 1036705792 (988 MB)
kbd1 at kbdmux0
ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
acpi0: <A M I OEMRSDT> on motherboard
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0
cpu0: <ACPI CPU> on acpi0
acpi_perf0: invalid _PSS package
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <VIA 8380 host to PCI bridge> mem 0xde000000-0xdfffffff at device 0.0 on pci0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci1: <ACPI PCI bus> on pcib1
pci1: <display, VGA> at device 0.0 (no driver attached)
pci0: <simple comms> at device 13.0 (no driver attached)
atapci0: <VIA 6420 SATA150 controller> port 0xe400-0xe407,0xe000-0xe003,0xd800-0xd807,0xd400-0xd403,0xd000-0xd00f,0xc800-0xc8ff irq 10 at device 15.0 on pci0
ata2: <ATA channel 0> on atapci0
ata3: <ATA channel 1> on atapci0
atapci1: <VIA 8237 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xfc00-0xfc0f at device 15.1 on pci0
ata0: <ATA channel 0> on atapci1
ata1: <ATA channel 1> on atapci1
uhci0: <VIA 83C572 USB controller> port 0xb400-0xb41f irq 11 at device 16.0 on pci0
uhci0: [GIANT-LOCKED]
usb0: <VIA 83C572 USB controller> on uhci0
usb0: USB revision 1.0
uhub0: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1: <VIA 83C572 USB controller> port 0xb800-0xb81f irq 11 at device 16.1 on pci0
uhci1: [GIANT-LOCKED]
usb1: <VIA 83C572 USB controller> on uhci1
usb1: USB revision 1.0
uhub1: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2: <VIA 83C572 USB controller> port 0xc000-0xc01f irq 10 at device 16.2 on pci0
uhci2: [GIANT-LOCKED]
usb2: <VIA 83C572 USB controller> on uhci2
usb2: USB revision 1.0
uhub2: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3: <VIA 83C572 USB controller> port 0xc400-0xc41f irq 10 at device 16.3 on pci0
uhci3: [GIANT-LOCKED]
usb3: <VIA 83C572 USB controller> on uhci3
usb3: USB revision 1.0
uhub3: VIA UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0: <VIA VT6202 USB 2.0 controller> mem 0xf9c00000-0xf9c000ff irq 5 at device 16.4 on pci0
ehci0: [GIANT-LOCKED]
usb4: EHCI version 1.0
usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
usb4: <VIA VT6202 USB 2.0 controller> on ehci0
usb4: USB revision 2.0
uhub4: VIA EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ugen0: vendor 0x0c45 USB20 Camera, rev 2.00/1.00, addr 2
isab0: <PCI-ISA bridge> at device 17.0 on pci0
isa0: <ISA bus> on isab0
pci0: <multimedia, audio> at device 17.5 (no driver attached)
vr0: <VIA VT6102 Rhine II 10/100BaseTX> port 0xa800-0xa8ff mem 0xf9b00000-0xf9b000ff irq 11 at device 18.0 on pci0
miibus0: <MII bus> on vr0
ukphy0: <Generic IEEE 802.3u media interface> on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
vr0: Ethernet address: 00:11:d8:c5:92:84
acpi_button0: <Power Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model MouseMan+, device ID 0
ppc0: <ECP parallel printer port> port 0x378-0x37f,0x778-0x77b irq 7 drq 3 on acpi0
ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
ppc0: FIFO with 16/16/9 bytes threshold
ppbus0: <Parallel port bus> on ppc0
plip0: <PLIP network interface> on ppbus0
lpt0: <Printer> on ppbus0
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
sio0: <16550A-compatible COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
sio0: type 16550A
sio1: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 on acpi0
sio1: type 16550A
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem 0xcf000-0xd2fff,0xd3000-0xd4fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
uscanner0: Hewlett-Packard HP ScanJet 6300C, rev 1.00/1.00, addr 2
ulpt0: hp deskjet 5550, rev 2.00/1.00, addr 2, iclass 7/1
ulpt0: using bi-directional mode
Timecounter "TSC" frequency 2200102438 Hz quality 800
Timecounters tick every 1.000 msec
ad0: DMA limited to UDMA33, device found non-ATA66 cable
ad0: 29325MB <Maxtor 2F030J0 VAM51JJ0> at ata0-master UDMA33
acd0: DMA limited to UDMA33, device found non-ATA66 cable
acd0: DVDR <SONY DVD RW DW-Q28A/KYS1> at ata1-master UDMA33
acd1: CDRW <SONY CD-RW CRX230ED/4YS1> at ata1-slave UDMA33
ad1: 239372MB <Maxtor 6L250S0 BANC1E00> at ata2-master SATA150
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 
cd1 at ata1 bus 0 target 1 lun 0
cd1: <SONY CD-RW  CRX230ED 4YS1> Removable CD-ROM SCSI-0 device 
cd1: 33.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
cd0 at ata1 bus 0 target 0 lun 0
cd0: <SONY DVD RW DW-Q28A KYS1> Removable CD-ROM SCSI-0 device 
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/ad1s4a
pcm0: <VIA VT8237> port 0xb000-0xb0ff irq 5 at device 17.5 on pci0
pcm0: <Avance Logic ALC655 AC97 Codec>
pcm0: <VIA DXS Enabled: DXS 4 / SGD 1 / REC 1>
nvidia0: <GeForce 6200> mem 0xfb000000-0xfbffffff,0xe0000000-0xefffffff,0xfa000000-0xfaffffff irq 11 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
NVRM: detected agp.ko, aborting NVIDIA AGP setup!
nvidia0: detached
nvidia0: <GeForce 6200> mem 0xfb000000-0xfbffffff,0xe0000000-0xefffffff,0xfa000000-0xfaffffff irq 11 at device 0.0 on pci1
nvidia0: [GIANT-LOCKED]
NVRM: detected agp.ko, aborting NVIDIA AGP setup!
NVRM: detected agp.ko, aborting NVIDIA AGP setup!
umass0: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01, addr 3
umass0: Get Max Lun not supported (STALLED)
da0 at umass-sim0 bus 0 target 0 lun 0
da0: <WDC WD20 00BB-22GUC0 \\0000\\0000> Fixed Direct Access SCSI-0 device 
da0: 40.000MB/s transfers
da0: 190782MB (390721968 512 byte sectors: 255H 63S/T 24321C)
Disk too big, try '-o large' mount option
Disk too big, try '-o large' mount option
NVRM: detected agp.ko, aborting NVIDIA AGP setup!
Disk too big, try '-o large' mount option
Disk too big, try '-o large' mount option
Disk too big, try '-o large' mount option

-----------------Messages Output----------------------

Sep 14 22:22:24 pcbsd su: gvanessen to root on /dev/ttyp2
Sep 14 22:22:47 pcbsd last message repeated 3 times
Sep 14 22:23:27 pcbsd kernel: umass0: Cypress Semiconductor USB2.0 Storage Device, rev 2.00/0.01, addr 3
Sep 14 22:23:27 pcbsd kernel: umass0: Get Max Lun not supported (STALLED)
Sep 14 22:23:35 pcbsd kernel: da0 at umass-sim0 bus 0 target 0 lun 0
Sep 14 22:23:35 pcbsd kernel: da0: <WDC WD20 00BB-22GUC0 \0000\0000> Fixed Direct Access SCSI-0 device 
Sep 14 22:23:35 pcbsd kernel: da0: 40.000MB/s transfers
Sep 14 22:23:35 pcbsd kernel: da0: 190782MB (390721968 512 byte sectors: 255H 63S/T 24321C)
Sep 14 22:23:38 pcbsd kernel: Disk too big, try '-o large' mount option
Sep 14 22:23:45 pcbsd kernel: Disk too big, try '-o large' mount option
Sep 14 22:23:58 pcbsd su: gvanessen to root on /dev/ttyp2
Sep 14 22:23:59 pcbsd su: gvanessen to root on /dev/ttyp2
Sep 14 22:24:11 pcbsd kdm-bin[2446]: X server for display :0 terminated unexpectedly
Sep 14 22:24:12 pcbsd kernel: NVRM: detected agp.ko, aborting NVIDIA AGP setup!
Sep 14 22:29:31 pcbsd kernel: Disk too big, try '-o large' mount option
Sep 14 22:29:49 pcbsd kernel: Disk too big, try '-o large' mount option
Sep 14 22:32:30 pcbsd su: gvanessen to root on /dev/ttyp2
Sep 14 22:32:30 pcbsd su: gvanessen to root on /dev/ttyp2
Sep 14 22:36:45 pcbsd kernel: Disk too big, try '-o large' mount option
Sep 14 22:40:15 pcbsd su: gvanessen to root on /dev/ttyp2

------------------RC File-----------------------------

background_dhclient="YES" 
compat5x_enable="YES" 
sshd_enable="YES" 
usbd_enable="YES" 
moused_type="auto" 
moused_enable="YES" 
devd_enable="YES" 
devfs_system_ruleset="devfsrules_common" 
sendmail_enable="NO"
sendmail_rebuild_aliases="YES"
 
#Enable samba server 
samba_enable="YES" 
 
# Disable LPD  
lpd_enable="NO" 
 
# Enable CUPS 
cupsd_enable="YES" 
enable_linux="YES" 
 
# FSCK Enhancements 
fsck_y_enable="YES" 
background_fsck="NO" 
 
# tmpmfs Flags 
tmpmfs="YES" 
tmpsize="800m" 
tmpmfs_flags="-S" 
 
# Denyhosts Startup 
denyhosts_enable="YES" 

# powerd: adaptive speed while on AC power, adaptive while on battery power
powerd_enable="YES"
powerd_flags="-a adaptive -b adaptive" # set CPU frequency

# enable HALd 
dbus_enable="YES"
polkitd_enable="YES"
hald_enable="YES"

# Enables support for HPLIP
hpiod_enable="NO"
hpssd_enable="NO"

# ntpdate is deprecated and will eventually be removed from the distribution since
# the same functionality is available in ntpd(8).
# Without "ntpd_sync_on_start" option, ntpd refuses to perform an
# initial correction if the clock offset is too large.
#
ntpd_enable="YES"
ntpd_sync_on_start="YES"

# Enable the firewall
pf_rules="/etc/pf.conf"
pf_rules_enable="YES"
pf_enable="YES"
pf_flags=""

snddetect_enable="YES"
mixer_enable="YES"
bsdstats_enable="YES"
hostname="pcbsd"
ifconfig_vr0="DHCP"

------------------Loader File-------------------------

linux_load="YES"
ulpt_load="YES"
vesa_load="YES"
splash_pcx_load="NO"
bitmap_load="YES"
bitmap_name="/boot/loading-screen.pcx"
hw.pci.allow_unsupported_io_range="1"
hw.pci.allhw.pci.allow_unsupported_io_range="1"
hw.ata.atapi_dma="1"
autoboot_delay="2"
if_nfe_load="YES"
nvidia_load="YES"
beastie_disable="NO"

------------------Free Space--------------------------

Filesystem  1M-blocks Used Avail Capacity  Mounted on
/dev/ad1s4a      8570 2164  5719    27%    /
devfs               0    0     0   100%    /dev
linprocfs           0    0     0   100%    /compat/linux/proc
/dev/md0          771    0   708     0%    /tmp

------------------System Processes--------------------

last pid: 17073;  load averages:  0.18,  0.26,  0.26  up 0+00:22:51    22:40:27
92 processes:  1 running, 91 sleeping

Mem: 185M Active, 249M Inact, 145M Wired, 680K Cache, 111M Buf, 411M Free
Swap: 512M Total, 512M Free


  PID USERNAME    THR PRI NICE   SIZE    RES STATE    TIME   WCPU COMMAND
 5409 root          1  96    0 67916K 47708K select   0:53  4.54% Xorg
16928 root          1  96    0 25904K 22148K select   0:00  1.73% kcmshell
16939 root          1  96    0 25404K 20464K select   0:00  0.58% kdeinit
 5623 gvanessen     1  96    0 26080K 21928K select   0:04  0.10% kdeinit
12542 gvanessen     4  20    0 89604K 79784K kserel   0:32  0.00% firefox-bin
 5601 gvanessen     1  96    0 49920K 45152K select   0:05  0.00% kdeinit
 8619 gvanessen     1  96    0 42008K 37772K select   0:05  0.00% kdeinit
 5560 gvanessen     1  96    0 27596K 24144K select   0:03  0.00% kdeinit
 5562 gvanessen     1  96    0 29572K 25776K select   0:03  0.00% kdeinit
 5625 gvanessen     1  98    0 24296K 19688K select   0:03  0.00% NetworkTray
 5558 gvanessen     1  96    0 26468K 21728K select   0:02  0.00% kdeinit
 5550 gvanessen     1  96    0 31068K 27156K select   0:02  0.00% kdeinit
 2576 gvanessen     1  96    0  3532K  2392K select   0:02  0.00% gam_server
 6910 gvanessen     1  96    0 25152K 20980K select   0:02  0.00% kdeinit
 1161 root          1  96    0  1436K   880K select   0:01  0.00% moused
 5592 gvanessen     3  20  -76 11892K  9136K kserel   0:01  0.00% artsd
 5609 gvanessen     1  96    0 30248K 24164K select   0:01  0.00% kdeinit
  980 haldaemon     1  96    0  4920K  3776K select   0:01  0.00% hald