[PC-BSD Testing] Additional log files for bug reports 909, 910 and 911
kesa at himalia.fi
kesa at himalia.fi
Thu Jan 23 10:09:34 PST 2014
Kris Moore kirjoitti 2014-01-23 17:51:
> On 01/23/2014 11:27, kesa at himalia.fi wrote:
>> Kris Moore kirjoitti 2014-01-23 16:56:
>>> On 01/23/2014 09:55, Kris Moore wrote:
>>>> On 01/22/2014 05:37, kesa at himalia.fi wrote:
>>>>> These bugs seem to be fixed now with
>>>>> However, there is a bug in the first boot. I made a new ticket 948,
>>>>> but I can't access the tracker right now. So I'm posting in this
>>>>> thread to link the hardware details.
>>>>> After first stage install and booting the first time. The X server
>>>>> goes to self configuration. At the end, it will try to launch the X
>>>>> server. But this hangs in a black screen. I was able to launch the
>>>>> server and complete the second stage install after adding Driver
>>>>> "intel" to the Device section in /etc/X11/xorg.conf while in a
>>>>> user mode.
>>>>> Testing mailing list
>>>>> Testing at lists.pcbsd.org
>>>> So, does the X configuration work and let you do all the first-run
>>>> wizard stuff, but the login manager fails to start?
>>>> This may be a bug in in the Intel driver I've seen, where it can
>>>> run once, then it fails to start a second time. It may be that the
>>>> reboot you did fixed the issue, before even adding "intel" to the
>>>> xorg.conf section. Did you let it try and reboot first before going
>>>> single-user mode?
>>>> Also, whats your "pciconf -lv" again?
>>> Nevermind on the pciconf, found your old post about it :)
>> No it doesn't start the X server at all on the first boot. It hangs to
>> the first boot graphical part where initial users get created etc. I
>> did several reboot attempts that did all hang. I.e. I saw the login
>> manager only once after adding the entry to the xorg.conf and
>> completing the second stage of the install.
>> Also, I made several installs as I'm not homing to the system before
>> the final release and therefore I try to make a lot of testing. For
>> some reason, I managed to fix it by adding the "intel" only on my
>> first install. On the following reinstalls, it was always starting X
>> server configuration which ended to the blank screen and when
>> rebooting in single user mode, the Driver "intel" was missing again.
>> I'm not sure what I did differently. If "# mount -o rw tank1/*/* /" (I
>> looked the tank name with "mount -p") was not enough to make
>> persistent changes to the files. Or if there was something else I did
>> differently, since I didn't pay full attention on my first install. My
>> experience is mostly from Windows so finding my way around is still a
>> little experimental.
>> Testing mailing list
>> Testing at lists.pcbsd.org
> That is odd. When it booted the installer it "just worked"? When you
> first boot the installed system, did the "Accept this resolution"
> ever come up?
> I'm adding some more verbosity to the video wizard, so hopefully we can
> nail this down :)
The first part of the install, the system booted from the DVD, worked
without any problems. The second part, after rebooting, nothing showed
up in X. It just blinked the text "Configuring X " and couple other
similar texts and then it changed to black screen with a slight
intensity change (or my imagination).
More information about the Testing