[PC-BSD Testing] PC-BSD 9.2 Install failed !!!

Andreas Hotz aufderalb at googlemail.com
Sun Jan 13 15:45:02 PST 2013


Thanks for your reply !

Problem no way to move into the PC-BSD 9.2 installer
64 bit usb full / usb live with the card radeon express 200M !

Further information are:

dmesg: pciconf -l -cv: Ghostbsd 3.0 live 64bit rc4 (Dell Inspiron 1501)
 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'RS482 [Radeon Xpress 200M]'
    class      = displayl
    subclass   = VGA
    cap 01[50] = powerspec 2  supports D0 D1 D2 D3  current D0
    none1 at pci0:5:0:0:	class=0x028000 card=0x00071028 chip=0x431114e4 rev=0x01

and xorg in Ghostbsd 3.0. live 64bit rc4:

Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
        ModulePath   "/usr/local/lib/xorg/modules"
        FontPath     "/usr/local/lib/X11/fonts/misc/"
        FontPath     "/usr/local/lib/X11/fonts/TTF/"
        FontPath     "/usr/local/lib/X11/fonts/OTF"
        FontPath     "/usr/local/lib/X11/fonts/Type1/"
        FontPath     "/usr/local/lib/X11/fonts/100dpi/"
        FontPath     "/usr/local/lib/X11/fonts/75dpi/"
EndSection

Section "Module"
        Load  "dbe"
        Load  "dri"
        Load  "dri2"
        Load  "glx"
        Load  "extmod"
        Load  "record"
EndSection

Section "InputDevice"
        Identifier  "Keyboard0"
        Driver      "kbd"
EndSection

Section "InputDevice"
        Identifier  "Mouse0"
        Driver      "mouse"
        Option      "Protocol" "auto"
        Option      "Device" "/dev/sysmouse"
        Option      "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
        #DisplaySize      380   300     # mm
        Identifier   "Monitor0" VendorName   "ENC"
        ModelName    "L768"
        HorizSync    24.0 - 80.0
        VertRefresh  50.0 - 75.0
        Option      "DPMS"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                   # [<bool>]
        #Option     "SWcursor"                  # [<bool>]
        #Option     "Dac6Bit"                   # [<bool>]
        #Option     "Dac8Bit"                   # [<bool>]
        #Option     "BusType"                   # [<str>]
        #Option     "CPPIOMode"                 # [<bool>]
        #Option     "CPusecTimeout"             # <i>
        #Option     "AGPMode"                   # <i>
        #Option     "AGPFastWrite"              # [<bool>]
        #Option     "AGPSize"                   # <i>
        #Option     "GARTSize"                  # <i>
        #Option     "RingSize"                  # <i>
        #Option     "BufferSize"                # <i>
        #Option     "EnableDepthMoves"          # [<bool>]
        #Option     "EnablePageFlip"            # [<bool>]
        #Option     "NoBackBuffer"              # [<bool>]
        #Option     "DMAForXv"                  # [<bool>]
        #Option     "FBTexPercent"              # <i>
        #Option     "DepthBits"                 # <i>
        #Option     "PCIAPERSize"               # <i>
        #Option     "AccelDFS"                  # [<bool>]
        #Option     "IgnoreEDID"                # [<bool>]
        #Option     "CustomEDID"                # [<str>]
        #Option     "DisplayPriority"           # [<str>]
        #Option     "PanelSize"                 # [<str>]
        #Option     "ForceMinDotClock"          # <freq>
        #Option     "ColorTiling"               # [<bool>]
        #Option     "VideoKey"                  # <i>
        #Option     "RageTheatreCrystal"        # <i>
        #Option     "RageTheatreTunerPort"      # <i>
        #Option     "RageTheatreCompositePort"  # <i>
        #Option     "RageTheatreSVideoPort"     # <i>
        #Option     "TunerType"                 # <i>
        #Option     "RageTheatreMicrocPath"     # <str>
        #Option     "RageTheatreMicrocType"     # <str>
        #Option     "ScalerWidth"               # <i>
        #Option     "RenderAccel"               # [<bool>]
        #Option     "SubPixelOrder"             # [<str>]
        #Option     "ClockGating"               # [<bool>]
        #Option     "VGAAccess"                 # [<bool>]
        #Option     "ReverseDDC"                # [<bool>]
        #Option     "LVDSProbePLL"              # [<bool>]
        #Option     "AccelMethod"               # <str>
        #Option     "DRI"                       # [<bool>]
        #Option     "ConnectorTable"            # <str>
        #Option     "DefaultConnectorTable"     # [<bool>]
        #Option     "DefaultTMDSPLL"            # [<bool>]
        #Option     "TVDACLoadDetect"           # [<bool>]
        #Option     "ForceTVOut"                # [<bool>]
        #Option     "TVStandard"                # <str>
        #Option     "IgnoreLidStatus"           # [<bool>]
        #Option     "DefaultTVDACAdj"           # [<bool>]
        #Option     "Int10"                     # [<bool>]
        #Option     "EXAVSync"                  # [<bool>]
        #Option     "ATOMTVOut"                 # [<bool>]
        #Option     "R4xxATOM"                  # [<bool>]
        #Option     "ForceLowPowerMode"         # [<bool>]
        #Option     "DynamicPM"                 # [<bool>]
        #Option     "NewPLL"                    # [<bool>]
        #Option     "ZaphodHeads"               # <str>
        Identifier  "Card0"
        Driver      "radeon"
        VendorName  "Advanced Micro Devices [AMD] nee ATI"
        BoardName   "RS482 [Radeon Xpress 200M]"
        BusID       "PCI:1:5:0"
EndSection

Section "Screen"
        Identifier "Screen0"
        Device     "Card0"
        Monitor    "Monitor0"
        SubSection "Display"
                Viewport   0 0
                Depth     1
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     4
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     8
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     15
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     16
        EndSubSection
        SubSection "Display"
                Viewport   0 0
                Depth     24
        EndSubSection
EndSection

May it helps to find a solution like a similar boot parameter in
Linux like radeon.nomodeset=0 for PC-BSD ?

Thanks for your support

Andreas Hotz

2013/1/13 Curt Dox <tigersharke at gmail.com>:
>
>
> On Sat, Jan 12, 2013 at 7:13 PM, Andreas Hotz <aufderalb at googlemail.com>
> wrote:
>>
>> Hallo !
>>
>> No way to configure my ATI express 200m during Installation,
>> wheter with ati,ati-3d,radeon,radeon-3d, even Vesa failed !!! :-(
>>
>> I would be very happy, if anybody support me with my problem ? !
>>
>> --> Maybe with a boot loader prompt OPTION or a emergency boot OPTION !
>>
>> I would help spread PC-BSD by installing it my friends laptop DEll
>> Inspiron 1501,
>> if not I had to use Linux !
>>
>> Thanks for your very good support
>>
>> Andreas Hotz
>>
>> PS: when I use GhostBSD 3.0 Live Install --> no Problem to boot into
>> the Install Screen ? ? !
>> _______________________________________________
>> Testing mailing list
>> Testing at lists.pcbsd.org
>> http://lists.pcbsd.org/mailman/listinfo/testing
>
>
> Hello!
>
> It would be very helpful for us to diagnose the problem(s) if you can give
> more details. Knowing which media was used, whether i386 or x64, and what
> precise hardware you have will all be significant. There are a few
> diagnostic commands that will provide needed information. Since you can boot
> GhostBSD, perhaps you can paste the output (as root from an xterm, ie
> command line) of:
> dmesg ;hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'RS482 [Radeon Xpress 200M]'
    class      = display
    subclass   = VGA
    cap 01[50] = powerspec 2  supports D0 D1 D2 D3  current D0

>
> I wish you success in getting this resolved.


More information about the Testing mailing list