[PC-BSD Testing] bugs in 'About' and 'System manager' (64bit v9.1 release)

Curt Dox tigersharke at gmail.com
Mon Jan 7 15:35:27 PST 2013


Hello folks..

I have noticed an incongruity between the cli output and GUI representation
of both the About and System manager.  My primary concern was that
'Enlightenment' is not listed by 'About' which lead me to uncover the
disparity between the two forms of pc-metapkgmanager. A diagnostic sheet
(via system manager) is attached, GUI images and cli output below:

[tigersharke at ProfessorX] ~> pc-metapkgmanager status Enlightenment
The meta-pkg Enlightenment is installed
[tigersharke at ProfessorX] ~> pc-metapkgmanager status KDE
The meta-pkg KDE is installed
[tigersharke at ProfessorX] ~> pc-metapkgmanager status GNOME
The meta-pkg GNOME is partially installed
[tigersharke at ProfessorX] ~> pc-metapkgmanager status XFCE
The meta-pkg XFCE is not installed
[tigersharke at ProfessorX] ~> pc-metapkgmanager status LXDE
The meta-pkg LXDE is not installed
[tigersharke at ProfessorX] ~>

[image: Inline image 3]

[tigersharke at ProfessorX] ~> about-gui
X.Org X Server 1.10.6[tigersharke at ProfessorX] ~>

[image: Inline image 2]

The rather verbose output of pc-sysmanager follows:

[tigersharke at ProfessorX] /usr/home/tigersharke# pc-sysmanager
Locale: "en"
Locale: "en"
Starting metaWidget...
Done metaWidget...
Searching for meta-pkgs...
Found Package "Awesome" "A highly configurable, next generation framework
window manager"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Awesome/pkg-icon.png"
"Unsupported-Desktops" "YES"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Awesome/pkg-list"
Found Package "Compiz" "Compiz - OpenGL compositing manager"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Compiz/pkg-icon.png" "Misc" "NO"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Compiz/pkg-list"
Found Package "Desktops" "Supported Desktop Environments for your PC-BSD
system." "/var/db/pc-metapkgmanager/pkgsets/pcbsd/Desktops/pkg-icon.png" ""
"NO"
Found Package "Development" "Development tools and utilities for your
Desktop" "/var/db/pc-metapkgmanager/pkgsets/pcbsd/Development/pkg-icon.png"
"" "NO" "/var/db/pc-metapkgmanager/pkgsets/pcbsd/Development/pkg-list"
Found Package "Development-Debug" "Debuggers and utilities"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Development-Debug/pkg-icon.png"
"Development" "NO"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Development-Debug/pkg-list"
Found Package "Development-Embedded" "Software for the embedded developer"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Development-Embedded/pkg-icon.png"
"Development" "NO"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Development-Embedded/pkg-list"
Found Package "Development-IDE" "IDE's for developers"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Development-IDE/pkg-icon.png"
"Development" "NO"
Found Package "Development-Qt" "Development tools and utilities for the Qt
libraries"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Development-Qt/pkg-icon.png"
"Development" "NO"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Development-Qt/pkg-list"
Found Package "Development-Science" "Development packages for the
scientific user"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Development-Science/pkg-icon.png"
"Development" "NO"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Development-Science/pkg-list"
Found Package "Development-VCS" "Version Control Systems for dealing with
source code"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Development-VCS/pkg-icon.png"
"Development" "NO"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Development-VCS/pkg-list"
Found Package "Development-Web" "Packages and utilities for the Web
Developer"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Development-Web/pkg-icon.png"
"Development" "NO"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Development-Web/pkg-list"
Found Package "Enlightenment" "A very artistic X window manager. Among
other attributes, Enlightenment"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Enlightenment/pkg-icon.png"
"Unsupported-Desktops" "YES"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Enlightenment/pkg-list"
Found Package "Enlightenment-Modules" "Additional modules and themes for
the Enlightenment desktop"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Enlightenment-Modules/pkg-icon.png"
"Enlightenment" "NO"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Enlightenment-Modules/pkg-list"

Found Package "EvilWM" "Minimalist window manager based on 9wm"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/EvilWM/pkg-icon.png"
"Unsupported-Desktops" "YES"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/EvilWM/pkg-list"

Found Package "FVWM" "FVWM is an extremely powerful ICCCM-compliant
multiple virtual desktop window manager for the X Window system."
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/FVWM/pkg-icon.png"
"Unsupported-Desktops" "YES"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/FVWM/pkg-list"
Found Package "GNOME" "The GNOME2 Desktop"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/GNOME/pkg-icon.png" "Desktops"
"YES"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/GNOME/pkg-list"

Found Package "GNOME-Accessibility" "Accessibility applications for the
GNOME Desktop"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/GNOME-Accessibility/pkg-icon.png"
"GNOME" "NO"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/GNOME-Accessibility/pkg-list"

Found Package "GNOME-Games" "Games for the GNOME Desktop"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/GNOME-Games/pkg-icon.png" "GNOME"
"NO"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/GNOME-Games/pkg-list"

Found Package "GNOME-Net" "Internet and Mail programs for the GNOME
Desktop" "/var/db/pc-metapkgmanager/pkgsets/pcbsd/GNOME-Net/pkg-icon.png"
"GNOME" "NO"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/GNOME-Net/pkg-list"

Found Package "GNOME-Utilities" "Utilities for the GNOME Desktop"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/GNOME-Utilities/pkg-icon.png"
"GNOME" "NO"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/GNOME-Utilities/pkg-list"

Found Package "HPLIP" "Drivers and utilities for HP Printers and All-in-One
devices" "/var/db/pc-metapkgmanager/pkgsets/pcbsd/HPLIP/pkg-icon.png"
"Hardware-Drivers" "NO"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/HPLIP/pkg-list"

Found Package "Handheld" "Drivers and Utilities for syncing with handheld
devices" "/var/db/pc-metapkgmanager/pkgsets/pcbsd/Handheld/pkg-icon.png"
"Hardware-Drivers" "NO"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Handheld/pkg-list"

Found Package "Hardware-Drivers" "Additional drivers and software for
specific hardware."
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Hardware-Drivers/pkg-icon.png" ""
"NO"

Found Package "I3" "i3 is an improved dynamic, tiling window manager."
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/I3/pkg-icon.png"
"Unsupported-Desktops" "YES"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/I3/pkg-list"

Found Package "IceWM" "Window Manager designed for speed, usability and
consistency" "/var/db/pc-metapkgmanager/pkgsets/pcbsd/IceWM/pkg-icon.png"
"Unsupported-Desktops" "YES"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/IceWM/pkg-list"

Found Package "KDE" "The KDE4 Desktop"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/KDE/pkg-icon.png" "Desktops" "YES"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/KDE/pkg-list"

Found Package "KDE-Accessibility" "Accessibility applications for KDE4"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/KDE-Accessibility/pkg-icon.png"
"KDE" "NO"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/KDE-Accessibility/pkg-list"

Found Package "KDE-Artwork" "Additional artwork and themes for the KDE4
desktop" "/var/db/pc-metapkgmanager/pkgsets/pcbsd/KDE-Artwork/pkg-icon.png"
"KDE" "NO" "/var/db/pc-metapkgmanager/pkgsets/pcbsd/KDE-Artwork/pkg-list"
Found Package "KDE-Calligra" "KOffice is a free, integrated office suite
for KDE, the K Desktop Environment."
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/KDE-Calligra/pkg-icon.png" "KDE"
"NO" "/var/db/pc-metapkgmanager/pkgsets/pcbsd/KDE-Calligra/pkg-list"
Found Package "KDE-Education" "Educational games for the KDE4 Desktop"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/KDE-Education/pkg-icon.png" "KDE"
"NO" "/var/db/pc-metapkgmanager/pkgsets/pcbsd/KDE-Education/pkg-list"
Found Package "KDE-Games" "Games for the KDE4 Desktop"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/KDE-Games/pkg-icon.png" "KDE" "NO"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/KDE-Games/pkg-list"
Found Package "KDE-Graphics" "KDE4 tools for managing Images and Graphics"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/KDE-Graphics/pkg-icon.png" "KDE"
"NO" "/var/db/pc-metapkgmanager/pkgsets/pcbsd/KDE-Graphics/pkg-list"
Found Package "KDE-L10N" "Localized file and Translations for the KDE4
Desktop" "/var/db/pc-metapkgmanager/pkgsets/pcbsd/KDE-L10N/pkg-icon.png"
"KDE" "NO" "/var/db/pc-metapkgmanager/pkgsets/pcbsd/KDE-L10N/pkg-list"
Found Package "KDE-Multimedia" "KDE4 multimedia players and utilities"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/KDE-Multimedia/pkg-icon.png" "KDE"
"NO" "/var/db/pc-metapkgmanager/pkgsets/pcbsd/KDE-Multimedia/pkg-list"
Found Package "KDE-Network" "KDE4 networking, internet, and IM
applications."
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/KDE-Network/pkg-icon.png" "KDE"
"NO" "/var/db/pc-metapkgmanager/pkgsets/pcbsd/KDE-Network/pkg-list"
Found Package "KDE-PIM" "Personal information management tools for KDE4"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/KDE-PIM/pkg-icon.png" "KDE" "NO"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/KDE-PIM/pkg-list"
Found Package "KDE-SDK" "SDK and related tools for the KDE4 Desktop"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/KDE-SDK/pkg-icon.png" "KDE" "NO"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/KDE-SDK/pkg-list"
Found Package "KDE-Toys" "Toys for the KDE4 Desktop"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/KDE-Toys/pkg-icon.png" "KDE" "NO"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/KDE-Toys/pkg-list"
Found Package "KDE-WebDevKit" "Web Development and related tools for the
KDE4 Desktop"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/KDE-WebDevKit/pkg-icon.png" "KDE"
"NO" "/var/db/pc-metapkgmanager/pkgsets/pcbsd/KDE-WebDevKit/pkg-list"
Found Package "LXDE" "The LXDE Desktop, a light weight and minimal desktop
manager." "/var/db/pc-metapkgmanager/pkgsets/pcbsd/LXDE/pkg-icon.png"
"Desktops" "YES" "/var/db/pc-metapkgmanager/pkgsets/pcbsd/LXDE/pkg-list"
Found Package "Misc" "Miscellaneous Non-Desktop specific applications"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Misc/pkg-icon.png" "" "NO"
Found Package "MythTV" "The MythTV OpenSource DVR"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/MythTV/pkg-icon.png" "Misc" "NO"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/MythTV/pkg-list"
Found Package "NVIDIA" "NVIDIA Drivers for your desktop / laptop."
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/NVIDIA/pkg-icon.png"
"Hardware-Drivers" "NO"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/NVIDIA/pkg-list"
Found Package "Openbox" "Openbox is a highly configurable, next generation
window manager with extensive standards support."
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Openbox/pkg-icon.png"
"Unsupported-Desktops" "YES"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Openbox/pkg-list"
Found Package "Ratpoison" "Ratpoison is a simple Window Manager with no fat
library dependencies, no fancy graphics, no window decorations."
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Ratpoison/pkg-icon.png"
"Unsupported-Desktops" "YES"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Ratpoison/pkg-list"
Found Package "Rekonq" "Rekonq is a KDE browser based upon Webkit."
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Rekonq/pkg-icon.png" "KDE" "NO"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Rekonq/pkg-list"
Found Package "Spectrwm" "Spectrwm is a small dynamic tiling window manager
for X11." "/var/db/pc-metapkgmanager/pkgsets/pcbsd/Spectrwm/pkg-icon.png"
"Unsupported-Desktops" "YES"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Spectrwm/pkg-list"
Found Package "Unsupported-Desktops" "Additional desktops and Window
Managers for experts."
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Unsupported-Desktops/pkg-icon.png"
"" "NO"
Found Package "VMwareGuest" "The Open Virtual Machine Tools for VMware
guests" "/var/db/pc-metapkgmanager/pkgsets/pcbsd/VMwareGuest/pkg-icon.png"
"Misc" "NO" "/var/db/pc-metapkgmanager/pkgsets/pcbsd/VMwareGuest/pkg-list"
Found Package "VirtualBoxGuest" "The VirtualBox OSE additions packages"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/VirtualBoxGuest/pkg-icon.png"
"Misc" "NO"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/VirtualBoxGuest/pkg-list"
Found Package "WindowLab" "WindowLab is a small and simple window manager,
based on aewm, of novel design."
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/WindowLab/pkg-icon.png"
"Unsupported-Desktops" "YES"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/WindowLab/pkg-list"
Found Package "Window_Maker" "GNUstep-compliant NeXTstep window manager
clone" "/var/db/pc-metapkgmanager/pkgsets/pcbsd/Window_Maker/pkg-icon.png"
"Unsupported-Desktops" "YES"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/Window_Maker/pkg-list"
Found Package "XBMC" "XBMC Media Center"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/XBMC/pkg-icon.png" "Misc" "NO"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/XBMC/pkg-list"
Found Package "XFCE" "The XFCE4 Desktop"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/XFCE/pkg-icon.png" "Desktops"
"YES" "/var/db/pc-metapkgmanager/pkgsets/pcbsd/XFCE/pkg-list"
Found Package "XFCE-Plugins" "Optional plugins for the XFCE4 desktop"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/XFCE-Plugins/pkg-icon.png" "XFCE"
"NO" "/var/db/pc-metapkgmanager/pkgsets/pcbsd/XFCE-Plugins/pkg-list"
Found Package "base-system" "The PC-BSD base set of packages"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/base-system/pkg-icon.png" "" "NO"
"/var/db/pc-metapkgmanager/pkgsets/pcbsd/base-system/pkg-list"
[tigersharke at ProfessorX] /usr/home/tigersharke#
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.pcbsd.org/pipermail/testing/attachments/20130107/a6518972/attachment-0001.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: about.jpg
Type: image/jpeg
Size: 42723 bytes
Desc: not available
URL: <http://lists.pcbsd.org/pipermail/testing/attachments/20130107/a6518972/attachment-0002.jpg>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: system-manager.jpg
Type: image/jpeg
Size: 117556 bytes
Desc: not available
URL: <http://lists.pcbsd.org/pipermail/testing/attachments/20130107/a6518972/attachment-0003.jpg>
-------------- next part --------------
PC-BSD 9.1 Diagnostic Sheet
Generated: Mon Jan  7 17:33:12 CST 2013

-----------------Dmesg Output-------------------------

ahci0: AHCI v1.20 with 4 6Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich2: <AHCI channel> at channel 2 on ahci0
ahcich3: <AHCI channel> at channel 3 on ahci0
ohci0: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb0a000-0xfeb0afff irq 18 at device 18.0 on pci0
usbus2 on ohci0
ehci0: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb09000-0xfeb090ff irq 17 at device 18.2 on pci0
usbus3: EHCI version 1.0
usbus3 on ehci0
ohci1: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb08000-0xfeb08fff irq 20 at device 19.0 on pci0
usbus4 on ohci1
ehci1: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb07000-0xfeb070ff irq 21 at device 19.2 on pci0
usbus5: EHCI version 1.0
usbus5 on ehci1
pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
atapci2: <ATI IXP700/800 UDMA133 controller> port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf000-0xf00f irq 17 at device 20.1 on pci0
ata0: <ATA channel> at channel 0 on atapci2
ata1: <ATA channel> at channel 1 on atapci2
hdac1: <ATI SB600 HDA Controller> mem 0xfeb00000-0xfeb03fff irq 16 at device 20.2 on pci0
isab0: <PCI-ISA bridge> at device 20.3 on pci0
isa0: <ISA bus> on isab0
pcib6: <ACPI PCI-PCI bridge> at device 20.4 on pci0
pci6: <ACPI PCI bus> on pcib6
ohci2: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb06000-0xfeb06fff irq 18 at device 20.5 on pci0
usbus6 on ohci2
pcib7: <ACPI PCI-PCI bridge> at device 21.0 on pci0
pci7: <ACPI PCI bus> on pcib7
pcib8: <ACPI PCI-PCI bridge> at device 21.1 on pci0
pci8: <ACPI PCI bus> on pcib8
re0: <RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet> port 0xb000-0xb0ff mem 0xd0004000-0xd0004fff,0xd0000000-0xd0003fff irq 17 at device 0.0 on pci8
re0: Using 1 MSI-X message
re0: Chip rev. 0x2c800000
re0: MAC rev. 0x00000000
miibus0: <MII bus> on re0
rgephy0: <RTL8169S/8110S/8211 1000BASE-T media interface> PHY 1 on miibus0
rgephy0:  none, 10baseT, 10baseT-FDX, 10baseT-FDX-flow, 100baseTX, 100baseTX-FDX, 100baseTX-FDX-flow, 1000baseT, 1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, 1000baseT-FDX-flow, 1000baseT-FDX-flow-master, auto, auto-flow
re0: Ethernet address: c8:60:00:75:f3:ed
ohci3: <AMD SB7x0/SB8x0/SB9x0 USB controller> mem 0xfeb05000-0xfeb05fff irq 22 at device 22.0 on pci0
usbus7 on ohci3
ehci2: <AMD SB7x0/SB8x0/SB9x0 USB 2.0 controller> mem 0xfeb04000-0xfeb040ff irq 23 at device 22.2 on pci0
usbus8: EHCI version 1.0
usbus8 on ehci2
amdtemp0: <AMD CPU On-Die Thermal Sensors> on hostb4
acpi_button0: <Power Button> on acpi0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
orm0: <ISA Option ROM> at iomem 0xd0000-0xd2fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
atkbdc0: <Keyboard controller (i8042)> at port 0x60,0x64 on isa0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
ppc0: cannot reserve I/O port range
hwpstate0: <Cool`n'Quiet 2.0> on cpu0
ZFS filesystem version 5
ZFS storage pool version 28
Timecounters tick every 10.000 msec
hdacc0: <ATI R6xx HDA CODEC> at cad 0 on hdac0
hdaa0: <ATI R6xx Audio Function Group> at nid 1 on hdacc0
pcm0: <ATI R6xx (HDMI)> at nid 3 on hdaa0
hdacc1: <Realtek ALC892 HDA CODEC> at cad 0 on hdac1
hdaa1: <Realtek ALC892 Audio Function Group> at nid 1 on hdacc1
pcm1: <Realtek ALC892 (Rear Analog 7.1/2.0)> at nid 20,22,21,23 and 24,26 on hdaa1
pcm2: <Realtek ALC892 (Front Analog)> at nid 27 and 25 on hdaa1
pcm3: <Realtek ALC892 (Rear Digital)> at nid 30 on hdaa1
pcm4: <Realtek ALC892 (Onboard Digital)> at nid 17 on hdaa1
usbus0: 5.0Gbps Super Speed USB v3.0
usbus1: 5.0Gbps Super Speed USB v3.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 480Mbps High Speed USB v2.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 12Mbps Full Speed USB v1.0
usbus8: 480Mbps High Speed USB v2.0
ugen0.1: <0x1b21> at usbus0
uhub0: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
ugen1.1: <0x1b21> at usbus1
uhub1: <0x1b21 XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus1
ugen2.1: <ATI> at usbus2
uhub2: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <ATI> at usbus3
uhub3: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <ATI> at usbus4
uhub4: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <ATI> at usbus5
uhub5: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus5
ugen6.1: <ATI> at usbus6
uhub6: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <ATI> at usbus7
uhub7: <ATI OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus7
ugen8.1: <ATI> at usbus8
uhub8: <ATI EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus8
uhub6: 2 ports with 2 removable, self powered
uhub7: 4 ports with 4 removable, self powered
uhub0: 4 ports with 4 removable, self powered
uhub1: 4 ports with 4 removable, self powered
uhub2: 5 ports with 5 removable, self powered
uhub4: 5 ports with 5 removable, self powered
uhub8: 4 ports with 4 removable, self powered
uhub3: 5 ports with 5 removable, self powered
uhub5: 5 ports with 5 removable, self powered
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
ada0 at ata4 bus 0 scbus2 target 0 lun 0
ada0: <WDC WD1600AAJS-08WAA0 58.01D58> ATA-8 SATA 2.x device
ada0: 33.300MB/s transfers (UDMA2, PIO 8192bytes)
ada0: 152627MB (312581808 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad8
ada1 at ahcich0 bus 0 scbus4 target 0 lun 0
ada1: <WDC WD5003AZEX-00K1GA0 80.00A80> ATA-8 SATA 3.x device
ada1: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada1: Command Queueing enabled
ada1: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada1: Previously was known as ad12
ada2 at ahcich1 bus 0 scbus5 target 0 lun 0
ada2: <WDC WD5003AZEX-00K1GA0 80.00A80> ATA-8 SATA 3.x device
ada2: 600.000MB/s transfers (SATA 3.x, UDMA6, PIO 8192bytes)
ada2: Command Queueing enabled
ada2: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada2: Previously was known as ad14
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 15677978 Hz quality 800
Trying to mount root from zfs:tank1/ROOT/default []...
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
Cuse4BSD v0.1.26 @ /dev/cuse
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
ppc0: cannot reserve I/O port range
SGI XFS with large block numbers, tracing, no debug enabled
vboxdrv: fAsync=0 offMin=0x870 offMax=0x1bbf
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.19
linux: pid 21256 (npviewer.bin): syscall pipe2 not implemented
linux: pid 21256 (npviewer.bin): syscall inotify_init not implemented
linux: pid 73281 (gam_server): syscall inotify_init not implemented
linux: pid 73296 (gam_server): syscall inotify_init not implemented
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
Limiting closed port RST response from 223 to 200 packets/sec
Limiting closed port RST response from 316 to 200 packets/sec
pid 14320 (blender-bin), uid 0: exited on signal 10
linux: pid 24324 (npviewer.bin): syscall pipe2 not implemented
linux: pid 52939 (npviewer.bin): syscall pipe2 not implemented
linux: pid 52983 (npviewer.bin): syscall pipe2 not implemented
linux: pid 54826 (npviewer.bin): syscall pipe2 not implemented
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
pid 54836 (npviewer.bin), uid 1001: exited on signal 11
linux: pid 93134 (npviewer.bin): syscall pipe2 not implemented
pid 42542 (npviewer.bin), uid 1001: exited on signal 11
linux: pid 46666 (npviewer.bin): syscall pipe2 not implemented
pid 864 (polkit-gnome-authen), uid 92: exited on signal 11
linux: pid 6924 (npviewer.bin): syscall pipe2 not implemented
linux: pid 61333 (npviewer.bin): syscall pipe2 not implemented
pid 61577 (python), uid 1001: exited on signal 6
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
pid 6924 (npviewer.bin), uid 1001: exited on signal 11
linux: pid 30207 (npviewer.bin): syscall pipe2 not implemented
linux: pid 32000 (npviewer.bin): syscall pipe2 not implemented
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
pid 6914 (plugin-container), uid 1001: exited on signal 11
linux: pid 70497 (npviewer.bin): syscall pipe2 not implemented
linux: pid 72194 (npviewer.bin): syscall pipe2 not implemented
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
ugen4.2: <ALCOR> at usbus4 (disconnected)
uhub9: at uhub4, port 3, addr 2 (disconnected)
ugen4.3: <LITE-ON Technology> at usbus4 (disconnected)
ukbd0: at uhub9, port 1, addr 3 (disconnected)
ugen4.4: <Kensington> at usbus4 (disconnected)
ums0: at uhub9, port 2, addr 4 (disconnected)
ugen4.5: <Device> at usbus4 (disconnected)
ukbd1: at uhub9, port 3, addr 5 (disconnected)
ugen4.2: <ALCOR> at usbus4
uhub9: <ALCOR Generic USB Hub, class 9/0, rev 1.10/3.12, addr 2> on usbus4
uhub9: 4 ports with 4 removable, self powered
ugen4.3: <LITE-ON Technology> at usbus4
ukbd0: <EP1 Interrupt> on usbus4
kbd2 at ukbd0
ugen4.4: <Kensington> at usbus4
ums0: <Kensington Kensington Expert Mouse, class 0/0, rev 1.10/1.00, addr 4> on usbus4
ums0: 4 buttons and [XYZ] coordinates ID=0
ugen4.5: <Device> at usbus4
ukbd1: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
kbd3 at ukbd1
uhid0: <Device 2Port KVMSwitcher, class 0/0, rev 1.10/0.01, addr 5> on usbus4
device_attach: uhid0 attach returned 12
linux: pid 90861 (npviewer.bin): syscall pipe2 not implemented
pid 90849 (plugin-container), uid 1001: exited on signal 11
linux: pid 9255 (npviewer.bin): syscall pipe2 not implemented
linux: pid 17580 (npviewer.bin): syscall pipe2 not implemented
Limiting closed port RST response from 213 to 200 packets/sec
linux: pid 24700 (npviewer.bin): syscall pipe2 not implemented
linux: pid 36784 (npviewer.bin): syscall pipe2 not implemented
linux: pid 36867 (npviewer.bin): syscall pipe2 not implemented
linux: pid 47280 (npviewer.bin): syscall pipe2 not implemented
Limiting closed port RST response from 232 to 200 packets/sec
Limiting closed port RST response from 255 to 200 packets/sec

-----------------Messages Output----------------------

Jan  2 08:41:28 ProfessorX kernel: linux: pid 9255 (npviewer.bin): syscall pipe2 not implemented
Jan  2 09:01:52 ProfessorX kernel: linux: pid 17580 (npviewer.bin): syscall pipe2 not implemented
Jan  2 14:42:22 ProfessorX su: tigersharke to root on /dev/pts/0
Jan  2 14:46:11 ProfessorX su: tigersharke to root on /dev/pts/0
Jan  2 14:54:33 ProfessorX su: tigersharke to root on /dev/pts/0
Jan  3 03:43:41 ProfessorX sudo: tigersharke : TTY=unknown ; PWD=/usr/home/tigersharke ; USER=root ; COMMAND=/usr/local/bin/pc-fbsdupdatecheck
Jan  3 10:54:23 ProfessorX kernel: Limiting closed port RST response from 213 to 200 packets/sec
Jan  3 17:51:12 ProfessorX kernel: linux: pid 24700 (npviewer.bin): syscall pipe2 not implemented
Jan  3 18:20:09 ProfessorX kernel: linux: pid 36784 (npviewer.bin): syscall pipe2 not implemented
Jan  3 18:20:50 ProfessorX kernel: linux: pid 36867 (npviewer.bin): syscall pipe2 not implemented
Jan  3 18:49:17 ProfessorX kernel: linux: pid 47280 (npviewer.bin): syscall pipe2 not implemented
Jan  4 03:43:40 ProfessorX sudo: tigersharke : TTY=unknown ; PWD=/usr/home/tigersharke ; USER=root ; COMMAND=/usr/local/bin/pc-fbsdupdatecheck
Jan  5 03:43:41 ProfessorX sudo: tigersharke : TTY=unknown ; PWD=/usr/home/tigersharke ; USER=root ; COMMAND=/usr/local/bin/pc-fbsdupdatecheck
Jan  5 11:48:39 ProfessorX su: tigersharke to root on /dev/pts/1
Jan  6 03:43:41 ProfessorX sudo: tigersharke : TTY=unknown ; PWD=/usr/home/tigersharke ; USER=root ; COMMAND=/usr/local/bin/pc-fbsdupdatecheck
Jan  6 09:03:41 ProfessorX ntpd[2509]: sendto(108.61.73.243) (fd=23): No route to host
Jan  6 15:30:33 ProfessorX kernel: Limiting closed port RST response from 232 to 200 packets/sec
Jan  7 03:43:41 ProfessorX sudo: tigersharke : TTY=unknown ; PWD=/usr/home/tigersharke ; USER=root ; COMMAND=/usr/local/bin/pc-fbsdupdatecheck
Jan  7 14:10:13 ProfessorX kernel: Limiting closed port RST response from 255 to 200 packets/sec
Jan  7 17:29:07 ProfessorX su: tigersharke to root on /dev/pts/0

------------------pciconf-----------------------------

hostb0 at pci0:0:0:0:	class=0x060000 card=0x5a141002 chip=0x5a141002 rev=0x02 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'RD890 PCI to PCI bridge (external gfx0 port B)'
    class      = bridge
    subclass   = HOST-PCI
none0 at pci0:0:0:2:	class=0x080600 card=0x5a231002 chip=0x5a231002 rev=0x00 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    class      = base peripheral
pcib1 at pci0:0:2:0:	class=0x060400 card=0x5a141002 chip=0x5a161002 rev=0x00 hdr=0x01
    vendor     = 'ATI Technologies Inc'
    device     = 'RD890 PCI to PCI bridge (PCI express gpp port B)'
    class      = bridge
    subclass   = PCI-PCI
pcib2 at pci0:0:4:0:	class=0x060400 card=0x5a141002 chip=0x5a181002 rev=0x00 hdr=0x01
    vendor     = 'ATI Technologies Inc'
    device     = 'RD890 PCI to PCI bridge (PCI express gpp port D)'
    class      = bridge
    subclass   = PCI-PCI
pcib3 at pci0:0:5:0:	class=0x060400 card=0x5a141002 chip=0x5a191002 rev=0x00 hdr=0x01
    vendor     = 'ATI Technologies Inc'
    device     = 'RD890 PCI to PCI bridge (PCI express gpp port E)'
    class      = bridge
    subclass   = PCI-PCI
pcib4 at pci0:0:6:0:	class=0x060400 card=0x5a141002 chip=0x5a1a1002 rev=0x00 hdr=0x01
    vendor     = 'ATI Technologies Inc'
    device     = 'RD890 PCI to PCI bridge (PCI express gpp port F)'
    class      = bridge
    subclass   = PCI-PCI
pcib5 at pci0:0:9:0:	class=0x060400 card=0x5a141002 chip=0x5a1c1002 rev=0x00 hdr=0x01
    vendor     = 'ATI Technologies Inc'
    device     = 'RD890 PCI to PCI bridge (PCI express gpp port H)'
    class      = bridge
    subclass   = PCI-PCI
ahci0 at pci0:0:17:0:	class=0x01018f card=0x84de1043 chip=0x43901002 rev=0x40 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'SB7x0/SB8x0/SB9x0 SATA Controller [IDE mode]'
    class      = mass storage
    subclass   = ATA
ohci0 at pci0:0:18:0:	class=0x0c0310 card=0x43971002 chip=0x43971002 rev=0x00 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'SB7x0/SB8x0/SB9x0 USB OHCI0 Controller'
    class      = serial bus
    subclass   = USB
ehci0 at pci0:0:18:2:	class=0x0c0320 card=0x43961002 chip=0x43961002 rev=0x00 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'SB7x0/SB8x0/SB9x0 USB EHCI Controller'
    class      = serial bus
    subclass   = USB
ohci1 at pci0:0:19:0:	class=0x0c0310 card=0x43971002 chip=0x43971002 rev=0x00 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'SB7x0/SB8x0/SB9x0 USB OHCI0 Controller'
    class      = serial bus
    subclass   = USB
ehci1 at pci0:0:19:2:	class=0x0c0320 card=0x43961002 chip=0x43961002 rev=0x00 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'SB7x0/SB8x0/SB9x0 USB EHCI Controller'
    class      = serial bus
    subclass   = USB
none1 at pci0:0:20:0:	class=0x0c0500 card=0x43851002 chip=0x43851002 rev=0x42 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'SBx00 SMBus Controller'
    class      = serial bus
    subclass   = SMBus
atapci2 at pci0:0:20:1:	class=0x01018a card=0x84de1043 chip=0x439c1002 rev=0x40 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'SB7x0/SB8x0/SB9x0 IDE Controller'
    class      = mass storage
    subclass   = ATA
hdac1 at pci0:0:20:2:	class=0x040300 card=0x84361043 chip=0x43831002 rev=0x40 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'SBx00 Azalia (Intel HDA)'
    class      = multimedia
    subclass   = HDA
isab0 at pci0:0:20:3:	class=0x060100 card=0x439d1002 chip=0x439d1002 rev=0x40 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'SB7x0/SB8x0/SB9x0 LPC host controller'
    class      = bridge
    subclass   = PCI-ISA
pcib6 at pci0:0:20:4:	class=0x060401 card=0x00000000 chip=0x43841002 rev=0x40 hdr=0x01
    vendor     = 'ATI Technologies Inc'
    device     = 'SBx00 PCI to PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
ohci2 at pci0:0:20:5:	class=0x0c0310 card=0x43991002 chip=0x43991002 rev=0x00 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'SB7x0/SB8x0/SB9x0 USB OHCI2 Controller'
    class      = serial bus
    subclass   = USB
pcib7 at pci0:0:21:0:	class=0x060400 card=0x00001002 chip=0x43a01002 rev=0x00 hdr=0x01
    vendor     = 'ATI Technologies Inc'
    device     = 'SB700/SB800 PCI to PCI bridge (PCIE port 0)'
    class      = bridge
    subclass   = PCI-PCI
pcib8 at pci0:0:21:1:	class=0x060400 card=0x00001002 chip=0x43a11002 rev=0x00 hdr=0x01
    vendor     = 'ATI Technologies Inc'
    device     = 'SB700/SB800 PCI to PCI bridge (PCIE port 1)'
    class      = bridge
    subclass   = PCI-PCI
ohci3 at pci0:0:22:0:	class=0x0c0310 card=0x43971002 chip=0x43971002 rev=0x00 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'SB7x0/SB8x0/SB9x0 USB OHCI0 Controller'
    class      = serial bus
    subclass   = USB
ehci2 at pci0:0:22:2:	class=0x0c0320 card=0x43961002 chip=0x43961002 rev=0x00 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'SB7x0/SB8x0/SB9x0 USB EHCI Controller'
    class      = serial bus
    subclass   = USB
hostb1 at pci0:0:24:0:	class=0x060000 card=0x00000000 chip=0x12001022 rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices [AMD]'
    device     = 'Family 10h Processor HyperTransport Configuration'
    class      = bridge
    subclass   = HOST-PCI
hostb2 at pci0:0:24:1:	class=0x060000 card=0x00000000 chip=0x12011022 rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices [AMD]'
    device     = 'Family 10h Processor Address Map'
    class      = bridge
    subclass   = HOST-PCI
hostb3 at pci0:0:24:2:	class=0x060000 card=0x00000000 chip=0x12021022 rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices [AMD]'
    device     = 'Family 10h Processor DRAM Controller'
    class      = bridge
    subclass   = HOST-PCI
hostb4 at pci0:0:24:3:	class=0x060000 card=0x00000000 chip=0x12031022 rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices [AMD]'
    device     = 'Family 10h Processor Miscellaneous Control'
    class      = bridge
    subclass   = HOST-PCI
hostb5 at pci0:0:24:4:	class=0x060000 card=0x00000000 chip=0x12041022 rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices [AMD]'
    device     = 'Family 10h Processor Link Control'
    class      = bridge
    subclass   = HOST-PCI
vgapci0 at pci0:1:0:0:	class=0x030000 card=0x0b001002 chip=0x68981002 rev=0x00 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'Radeon HD 5870 (Cypress)'
    class      = display
    subclass   = VGA
hdac0 at pci0:1:0:1:	class=0x040300 card=0xaa501002 chip=0xaa501002 rev=0x00 hdr=0x00
    vendor     = 'ATI Technologies Inc'
    device     = 'Cypress HDMI Audio [Radeon HD 5800 Series]'
    class      = multimedia
    subclass   = HDA
atapci0 at pci0:2:0:0:	class=0x010185 card=0x84601043 chip=0x2362197b rev=0x10 hdr=0x00
    vendor     = 'JMicron Technology Corp.'
    device     = 'JMB362 AHCI Controller'
    class      = mass storage
    subclass   = ATA
atapci1 at pci0:3:0:0:	class=0x010185 card=0x84601043 chip=0x2362197b rev=0x10 hdr=0x00
    vendor     = 'JMicron Technology Corp.'
    device     = 'JMB362 AHCI Controller'
    class      = mass storage
    subclass   = ATA
xhci0 at pci0:4:0:0:	class=0x0c0330 card=0x84881043 chip=0x10421b21 rev=0x00 hdr=0x00
    vendor     = 'ASMedia Technology Inc.'
    device     = 'ASM1042 SuperSpeed USB Host Controller'
    class      = serial bus
    subclass   = USB
xhci1 at pci0:5:0:0:	class=0x0c0330 card=0x84881043 chip=0x10421b21 rev=0x00 hdr=0x00
    vendor     = 'ASMedia Technology Inc.'
    device     = 'ASM1042 SuperSpeed USB Host Controller'
    class      = serial bus
    subclass   = USB
re0 at pci0:8:0:0:	class=0x020000 card=0x84321043 chip=0x816810ec rev=0x06 hdr=0x00
    vendor     = 'Realtek Semiconductor Co., Ltd.'
    device     = 'RTL8111/8168B PCI Express Gigabit Ethernet controller'
    class      = network
    subclass   = ethernet

------------------xorg.conf---------------------------

# Xorg.conf file generated for PC-BSD

Section "ServerLayout"
    Identifier     "XFree86 Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
    Option         "AutoAddDevices" "false"
    Option         "AllowEmptyInput" "off"
    Option	   "Clone" "off"
EndSection

Section "Files"
    ModulePath      "/usr/local/lib/xorg/modules"
    FontPath     "/usr/local/lib/X11/fonts/cyrillic/"
    FontPath     "/usr/local/lib/X11/fonts/TrueType/"
    FontPath     "/usr/local/lib/X11/fonts/illinoy/"
    FontPath     "/usr/local/lib/X11/fonts/webfonts/"
    FontPath     "/usr/local/lib/X11/fonts/misc/"
    FontPath     "/usr/local/lib/X11/fonts/OTF/"
    FontPath     "/usr/local/lib/X11/fonts/TTF/"
    FontPath     "/usr/local/lib/X11/fonts/Speedo/"
    FontPath     "/usr/local/lib/X11/fonts/Type1/"
    FontPath     "/usr/local/lib/X11/fonts/CID/"
    FontPath     "/usr/local/lib/X11/fonts/75dpi/"
    FontPath     "/usr/local/lib/X11/fonts/100dpi/"
    FontPath     "/usr/local/lib/X11/fonts/dejavu/"
    FontPath     "/usr/local/lib/X11/fonts/bitstream-vera/"
    FontPath     "/usr/local/lib/X11/fonts/cyrillic/"
    FontPath     "/usr/local/lib/X11/fonts/hebrew/"
    FontPath     "/usr/local/lib/X11/fonts/vietnamese/"
    FontPath     "/usr/local/lib/X11/fonts/indic/"
    FontPath     "/usr/local/lib/X11/fonts/fonts-indic/"
    FontPath     "/usr/local/lib/X11/fonts/ae_fonts1/AAHS"
    FontPath     "/usr/local/lib/X11/fonts/ae_fonts1/AGA"
    FontPath     "/usr/local/lib/X11/fonts/ae_fonts1/FS"
    FontPath     "/usr/local/lib/X11/fonts/ae_fonts1/Kasr"
    FontPath     "/usr/local/lib/X11/fonts/ae_fonts1/MCS"
    FontPath     "/usr/local/lib/X11/fonts/ae_fonts1/Shmookh"
    FontPath     "/usr/local/lib/X11/fonts/local/"
    FontPath     "/usr/local/lib/X11/fonts/util/"
EndSection

Section "Module"
    Load           "ddc"
    Load           "dbe"
    Load           "extmod"
EndSection

Section "InputDevice"
    Identifier     "Keyboard0"
    Driver         "keyboard"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "us"
    Option         "XkbVariant" ""
EndSection

Section "InputDevice"
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/sysmouse"
    Option         "Buttons" "6"
    Option         "ZAxisMapping" "4 5"
    Option         "Emulate3Buttons"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Monitor Vendor"
    ModelName      "Monitor Model"
    
    HorizSync    28.0-78.0
    VertRefresh  50.0-76.0
EndSection


Section "Device"
    Identifier      "Card0"
    Screen           0
    Driver         "vesa"
    VendorName     "Generic Vesa Driver"
    BusID      "PCI:1:0:0"
EndSection


Section "Screen"
    Identifier     "Screen0"
    Device         "Card0"
    Monitor        "Monitor0"
    DefaultDepth   24
    SubSection     "Display"
        Depth      24 
        Modes      "1920x1200"
    EndSubSection
EndSection

------------------RC File-----------------------------

background_dhclient="YES" 
compat5x_enable="YES" 
sshd_enable="NO" 
devd_enable="YES" 
devfs_system_ruleset="devfsrules_common" 
ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/kde4/lib /usr/local/lib/compat/pkg"

# Disable Sendmail by default
sendmail_enable="NONE"
sendmail_submit_enable="NO"
sendmail_outbound_enable="NO"
sendmail_msp_queue_enable="NO" 

#Enable samba server 
samba_enable="YES" 
winbindd_enable="YES"
 
# Disable LPD  
lpd_enable="NO" 
 
# Enable CUPS 
cupsd_enable="YES" 
linux_enable="YES"
 
# FSCK Enhancements 
fsck_y_enable="YES" 
 
# powerd: adaptive speed while on AC power, adaptive while on battery power
powerd_enable="YES"
powerd_flags="-a hiadaptive -b adaptive" # set CPU frequency

# enable HAL / DBUS
dbus_enable="YES"
hald_enable="YES"

# Enables support for HPLIP
hpiod_enable="NO"
hpssd_enable="NO"

# Enable the firewall
pf_rules="/etc/pf.conf"
pf_enable="YES"
pf_flags=""

# Enable sound-support
mixer_enable="YES"

# Enable avahi_daemon
avahi_daemon_enable="YES"

# Start the swapexd daemon
swapexd_enable="YES"

# Enable IPV6 support
ipv6_activate_all_interfaces="YES"

# Enable BSDStats
bsdstats_enable="YES"

# Enable webcamd
webcamd_enable="YES"

# Disable writing syslogs to remote devices by default
syslogd_flags="-c -ss"

# Enable pbid
pbid_enable="YES"

# Enable the gdm display manager
gdm_enable="YES"

# Enable BlueTooth
hcsecd_enable="YES"
sdpd_enable="YES"

# Load the following kernel modules
kld_list="libiconv libmchain msdosfs_iconv if_bwn if_bwi bwi_v3_ucode bwn_v4_ucode runfw ng_ubt cuse4bsd sem ntfs ntfs_iconv udf udf_iconv ext2fs mmc mmcsd scd geom_uzip pefs xfs reiserfs smbfs fdescfs linsysfs iwn4965fw iwn1000fw iwn5000fw iwn5150fw iwn6000fw iwn6000g2afw iwn6000g2bfw iwn6050fw acpi_video"

# Clean out temporary files.
clear_tmp_enable="YES"
clean_tmp_X="YES"

# Run the pcbsd init service
pcbsdinit_enable="YES"

# Enable anacron
anacron_enable="YES"

# Enable fusefs
fusefs_enable="YES"

# Enable volmand
volmand_enable="YES"

# Enable pefs
pefs_enable="YES"

# Enable moused
moused_enable="YES"

# Enable fast-booting
fastboot_enable="YES"
fastboot_earlyrc="/etc/rc.d/moused /usr/local/etc/rc.d/pefs /usr/local/etc/rc.d/dbus /usr/local/etc/rc.d/hald /usr/local/etc/rc.d/gdm"

# Enable the Warden
warden_enable="YES"

# Enable fail2ban
fail2ban_enable="YES"

# Enable FSC
fscd_enable="YES"

# Enable uhidd
uhidd_enable="YES"

# Enable ntpd
ntpd_enable="YES"
ntpd_sync_on_start="YES"
# Auto-Enabled NICs from pc-sysinstall
ifconfig_re0="DHCP"
# Auto-Enabled NICs from pc-sysinstall
ifconfig_re0_ipv6="inet6 accept_rtadv"
hostname="ProfessorX"
zfs_enable="YES"
vboxnet_enable="YES"
defaultrouter="10.10.1.1"
ftpd_enable="YES"
fbsdmon_enable="YES"

------------------Loader File-------------------------

# Kernel Options
kern.ipc.shmseg=1024
kern.ipc.shmmni=1024
kern.maxproc=10000

# Accept the firmware license
legal.intel_ipw.license_ack=1
legal.intel_iwi.license_ack=1

# Load additional sata device support
siis_load="YES"
sdhci_load="YES"

# Load geom support
geom_journal_load="YES"
geom_mirror_load="YES"
geom_eli_load="YES"

# Enable hardware crypto
aesni_load="YES"

# Load File-System Support
zfs_load="YES"
tmpfs_load="YES"

# Disable ZFS prefetch to improve performance
vfs.zfs.prefetch_disable="1"

# Disable acpi throttle by default, fixes issues with powerd and later AMDs
hint.acpi_throttle.0.disabled="1"

# Fix crashes on 32bit with Nvidia
machdep.disable_mtrrs=1

# Show keystokes for passphrases
kern.geom.eli.visible_passphrase=2 

# Enable the graphical boot-loader
autoboot_delay="03"
graphics_enable="YES"
beastie_theme="/boot/themes/default/theme.conf"

# Load splash screen
#splash_pcx_load="YES"
#bitmap_load="YES"
#bitmap_name="/boot/loading-screen.pcx"

# Speed up boot
kern.cam.scsi_delay="500"

# Adjust system kern.hz
kern.hz=100

# Placeholder for future ZFS TRIM support in 9.2/10
# vfs.zfs.trim_disable=0
vfs.root.mountfrom="zfs:tank1/ROOT/default"

#~~~~~~~~~~~~~~~
# My additions
#~~~~~~~~~~~~~~~
amdtemp_load=YES
acpi_asus_load=YES
#~~~~~~~~~~~~~~~
# Additions end
#~~~~~~~~~~~~~~~

------------------Free Space--------------------------

Filesystem                           1M-blocks   Used  Avail Capacity  Mounted on
tank1/ROOT/default                      212459   6857 205602     3%    /
devfs                                        0      0      0   100%    /dev
procfs                                       0      0      0   100%    /proc
linprocfs                                    0      0      0   100%    /compat/linux/proc
tank1/root                              205605      2 205602     0%    /root
tank1/tmp                               205604      2 205602     0%    /tmp
tank1/usr/home                          205607      5 205602     0%    /usr/home
tank1/usr/home/tigersharke              422387 216785 205602    51%    /usr/home/tigersharke
tank1/usr/jails                         205602      0 205602     0%    /usr/jails
tank1/usr/jails/.warden-chroot-amd64    206042    440 205602     0%    /usr/jails/.warden-chroot-amd64
tank1/usr/jails/10.10.1.20              207833   2231 205602     1%    /usr/jails/10.10.1.20
tank1/usr/jails/10.10.1.21              217528  11926 205602     5%    /usr/jails/10.10.1.21
tank1/usr/obj                           205602      0 205602     0%    /usr/obj
tank1/usr/pbi                           222193  16590 205602     7%    /usr/pbi
tank1/usr/ports                         206499    897 205602     0%    /usr/ports
tank1/usr/ports/distfiles               205625     22 205602     0%    /usr/ports/distfiles
tank1/usr/src                           206351    748 205602     0%    /usr/src
tank1/var/audit                         205602      0 205602     0%    /var/audit
tank1/var/log                           205602      0 205602     0%    /var/log
tank1/var/tmp                           205604      1 205602     0%    /var/tmp
devfs                                        0      0      0   100%    /usr/jails/10.10.1.21/dev
procfs                                       0      0      0   100%    /usr/jails/10.10.1.21/proc
/tmp                                    205604      2 205602     0%    /usr/jails/10.10.1.21/tmp
/media                                  212459   6857 205602     3%    /usr/jails/10.10.1.21/media
/usr/home                               205607      5 205602     0%    /usr/jails/10.10.1.21/usr/home
linprocfs                                    0      0      0   100%    /usr/jails/10.10.1.21/compat/linux/proc
devfs                                        0      0      0   100%    /usr/jails/10.10.1.20/dev
procfs                                       0      0      0   100%    /usr/jails/10.10.1.20/proc

------------------System Processes--------------------

last pid: 95242;  load averages:  0.56,  0.55,  0.66  up 13+21:34:16    17:33:12
134 processes: 1 running, 132 sleeping, 1 zombie

Mem: 4014M Active, 2729M Inact, 23G Wired, 343M Cache, 657M Free
Swap: 2048M Total, 3736K Used, 2044M Free


  PID USERNAME     THR PRI NICE   SIZE    RES STATE   C   TIME   WCPU COMMAND
36742 tigersharke   24  23    3  5308M  4482M uwait   0  23.2H 15.97% firefox
25946 tigersharke    8  75    3   773M   501M kqread  1  30.1H 11.96% qbittorrent
90808 root           1  23    0   394M   271M select  3  39.3H  2.98% Xorg
74914 tigersharke    1  28    3   171M 17496K select  1 290:31  1.95% gkrellm
90886 tigersharke    1  21    0   497M   169M select  1 363:23  0.98% enlightenment
47280 tigersharke    1  25    3  1034M   318M select  0 221:47  0.00% npviewer.bin
47270 tigersharke    2  23    3   224M 51532K kqread  3  49:35  0.00% plugin-container
59247 tigersharke    6  23    3   542M 99148K pcmwrv  3  40:09  0.00% python2.7
90985 tigersharke    1  23    3 60300K  4776K select  3  29:32  0.00% enlightenment_fm
90932 root           2  20    0   542M   366M select  3  14:45  0.00% pc-nettray
 2645 root           1  52   20 18600K  1968K wait    2  13:29  0.00% sh
47289 tigersharke    1  23    3  1034M   318M futex   0   6:36  0.00% npviewer.bin
47290 tigersharke    1  23    3  1034M   318M futex   1   5:49  0.00% npviewer.bin
47291 tigersharke    1  23    3  1034M   318M futex   2   5:23  0.00% npviewer.bin
84387 root           1  30   10 14232K  1464K select  3   3:10  0.00% moused
  418 haldaemon      2  20    0 56944K  3840K piperd  0   2:15  0.00% hald
 2512 root           1  30   10 12052K   988K select  3   1:21  0.00% powerd
 2632 root           1  35   10  9916K  1056K nanslp  2   0:54  0.00% swapexd






More information about the Testing mailing list