[PC-BSD Testing] PC-thinclient x auto-detection failed
N V
vans9 at yandex.ru
Fri Oct 5 00:40:11 PDT 2012
Hi.
Btw I have to add that I wasn't successfull with D525 (with GMA3150).
The "Screen went black and nothing responds" was rigth after First boot
Wizard. Seems to be a regular KMS issue when it cann't drop to the text
console after X has been started.
On 5 октября 2012 02:55:37 Andreas Hotz wrote:
> Hallo, I just installed PC-BSD 9.1 on an Intel d525 with a gma 3150
> everything worked well
> with auto detection Intel 1024x768 configuration !!!
>
> But if I want to use the machine as an pxe clent via lan boot auto
> detection of Intel failed
> with TFT LED Control light off and black screen
>
> xorg.conf of thinclient machine:
>
> Section "ServerFlags"
> Option "DisableVidModeExtension" "True"
> Option "AutoAddDevices" "False"
> Option "AllowEmptyInput" "Off"
> EndSection
>
> Section "ServerLayout"
> Identifier "X.org Configured"
> Screen 0 "Screen0" 0 0
> InputDevice "Mouse0" "CorePointer"
> InputDevice "Keyboard0" "CoreKeyboard"
> EndSection
>
> Section "Files"
> ModulePath "/usr/local/lib/xorg/modules"
> FontPath "/usr/local/lib/X11/fonts/misc/"
> FontPath "/usr/local/lib/X11/fonts/TTF/"
> FontPath "/usr/local/lib/X11/fonts/OTF"
> FontPath "/usr/local/lib/X11/fonts/Type1/"
> FontPath "/usr/local/lib/X11/fonts/100dpi/"
> FontPath "/usr/local/lib/X11/fonts/75dpi/"
> EndSection
>
> Section "Module"
> Load "dri2"
> Load "record"
> Load "glx"
> Load "extmod"
> Load "dri"
> Load "dbe"
> EndSection
>
> Section "InputDevice"
> Identifier "Keyboard0"
> Driver "kbd"
> EndSection
>
> Section "InputDevice"
> Identifier "Mouse0"
> Driver "mouse"
> Option "Protocol" "auto"
> Option "Device" "/dev/sysmouse"
> Option "ZAxisMapping" "4 5 6 7"
> EndSection
>
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Monitor Vendor"
> ModelName "Monitor Model"
> EndSection
>
> Section "Device"
> ### Available Driver options are:-
> ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
> ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
> ### [arg]: arg optional
> #Option "NoAccel" # [<bool>]
> #Option "SWcursor" # [<bool>]
> #Option "ColorKey" # <i>
> #Option "CacheLines" # <i>
> #Option "Dac6Bit" # [<bool>]
> #Option "DRI" # [<bool>]
> #Option "NoDDC" # [<bool>]
> #Option "ShowCache" # [<bool>]
> #Option "XvMCSurfaces" # <i>
> #Option "PageFlip" # [<bool>]
> Identifier "Card0"
> Driver "intel"
> VendorName "Intel Corporation"
> BoardName "Atom Processor D4xx/D5xx/N4xx/N5xx Integrated Graphics
> Controller" BusID "PCI:0:2:0"
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "Card0"
> Monitor "Monitor0"
> SubSection "Display"
> Viewport 0 0
> Depth 1
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 4
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 8
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 15
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 16
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 24
> EndSubSection
>
> EndSection
>
>
> and xorg.conf of the PC-BSD normal install:
>
> Section "ServerLayout"
> Identifier "X.org Configured"
> Screen 0 "Screen0" 0 0
> Screen 1 "Screen1" RightOf "Screen0"
> InputDevice "Mouse0" "CorePointer"
> InputDevice "Keyboard0" "CoreKeyboard"
> EndSection
>
> Section "Files"
> ModulePath "/usr/local/lib/xorg/modules"
> FontPath "/usr/local/lib/X11/fonts/misc/"
> FontPath "/usr/local/lib/X11/fonts/TTF/"
> FontPath "/usr/local/lib/X11/fonts/OTF/"
> FontPath "/usr/local/lib/X11/fonts/Type1/"
> FontPath "/usr/local/lib/X11/fonts/100dpi/"
> FontPath "/usr/local/lib/X11/fonts/75dpi/"
> EndSection
>
> Section "Module"
> Load "dbe"
> Load "dri"
> Load "dri2"
> Load "extmod"
> Load "glx"
> Load "record"
> EndSection
>
> Section "InputDevice"
> Identifier "Keyboard0"
> Driver "kbd"
> EndSection
>
> Section "InputDevice"
> Identifier "Mouse0"
> Driver "mouse"
> Option "Protocol" "auto"
> Option "Device" "/dev/sysmouse"
> Option "ZAxisMapping" "4 5 6 7"
> EndSection
>
> Section "Monitor"
> Identifier "Monitor0"
> VendorName "Monitor Vendor"
> ModelName "Monitor Model"
> EndSection
>
> Section "Monitor"
> Identifier "Monitor1"
> VendorName "Monitor Vendor"
> ModelName "Monitor Model"
> EndSection
>
> Section "Device"
> ### Available Driver options are:-
> ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
> ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
> ### <percent>: "<f>%"
> ### [arg]: arg optional
> #Option "DRI" # [<bool>]
> #Option "ColorKey" # <i>
> #Option "VideoKey" # <i>
> #Option "FallbackDebug" # [<bool>]
> #Option "Tiling" # [<bool>]
> #Option "LinearFramebuffer" # [<bool>]
> #Option "Shadow" # [<bool>]
> #Option "SwapbuffersWait" # [<bool>]
> #Option "TripleBuffer" # [<bool>]
> #Option "XvPreferOverlay" # [<bool>]
> #Option "DebugFlushBatches" # [<bool>]
> #Option "DebugFlushCaches" # [<bool>]
> #Option "DebugWait" # [<bool>]
> #Option "HotPlug" # [<bool>]
> #Option "RelaxedFencing" # [<bool>]
> Identifier "Card0"
> Driver "intel"
> BusID "PCI:0:2:0"
> EndSection
>
> Section "Device"
> ### Available Driver options are:-
> ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
> ### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
> ### <percent>: "<f>%"
> ### [arg]: arg optional
> #Option "ShadowFB" # [<bool>]
> #Option "DefaultRefresh" # [<bool>]
> #Option "ModeSetClearScreen" # [<bool>]
> Identifier "Card1"
> Driver "vesa"
> BusID "PCI:0:2:0"
> EndSection
>
> Section "Screen"
> Identifier "Screen0"
> Device "Card0"
> Monitor "Monitor0"
> SubSection "Display"
> Viewport 0 0
> Depth 1
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 4
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 8
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 15
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 16
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 24
> EndSubSection
> EndSection
>
> Section "Screen"
> Identifier "Screen1"
> Device "Card1"
> Monitor "Monitor1"
> SubSection "Display"
> Viewport 0 0
> Depth 1
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 4
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 8
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 15
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 16
> EndSubSection
> SubSection "Display"
> Viewport 0 0
> Depth 24
> EndSubSection
> EndSection
>
> Should it be the same auto-detection on both ways ?
>
> Thanks for your support
>
> A.Hotz
> _______________________________________________
> Testing mailing list
> Testing at lists.pcbsd.org
> http://lists.pcbsd.org/mailman/listinfo/testing
More information about the Testing
mailing list