[PC-BSD Testing] pcbsd-snapshot-20120605 - installation results

user10508 at gmail.com user10508 at gmail.com
Sat Jun 9 09:33:54 PDT 2012


Hardware:

Asus K53E, laptop: 

CPU     -  sandybridge core i5, gen 2
RAM     -  8192 GB
GPU     -  Intel iga 
Disk    -  500 GB Hitachi 

and various other hardware.

Hard drive partitioning:

Primary Partitions:
Partition 1   -  win 7 recovery 
Partition 2   -  win 7
Partition 3   -  unformatted

Extended Partition:
Partitions  4 - 8 - various linux distributions


Boot grub2 from linux mint 13 on extended partition.


Initial pscbsd snapshot installation attempt:

Results - failure

Installer could not handle initial partition configuration.

Installer raised a "No free space" for installation condition.

Second attempt:

Results - failure

I manually defined partition 3 and formatted it to fat32

Restarted installation.

Installation was configured for zfs, encryption, gnome:

Installer raised an error condition - complete debug log at bottom of
this message. Log contents up to error condition as follows:

BEGIN PARTIAL PC-SYSINSTALL LOG CONTENTS:

# PC-SYSINSTALL LOG
kern.geom.debugflags: 0 -> 16
Running gpart modify on /dev/ada0
Running: gpart modify -t freebsd -i 3 /dev/ada0
ada0s3 modified
Cleaning up /dev/ada0s3
Running: dd if=/dev/zero of=/dev/ada0s3 count=1024
1024+0 records in
1024+0 records out
524288 bytes transferred in 0.426183 secs (1230195 bytes/sec)
Running: gpart create -s BSD /dev/ada0s3
ada0s3 created
Running: gpart add -s 1028M -t freebsd-ufs -i 1 /dev/ada0s3
ada0s3a added
Running: gpart add  -t freebsd-zfs -i 2 /dev/ada0s3
ada0s3b added
Running: gpart bootcode -b /boot/boot /dev/ada0s3
bootcode written to ada0s3
NEWFS: /dev/ada0s3a - UFS+SUJ
Running: newfs  -U /dev/ada0s3a
/dev/ada0s3a: 1028.0MB (2105344 sectors) block size 32768, fragment
size 4096
	using 4 cylinder groups of 257.03MB, 8225 blks, 33024 inodes.
	with soft updates
super-block backups (for fsck -b #) at:
 192, 526592, 1052992, 1579392
Running: sync
Running: tunefs -j enable /dev/ada0s3a
tunefs: soft updates journaling set
Using inode 4 in cg 0 for 8421376 byte journal
Running: sync
Running: glabel label boot0 /dev/ada0s3a
Running: sync
NEWFS: /dev/ada0s3b - ZFS
Running: zpool create -m none -f tank0 /dev/ada0s3b
Running: zfs set atime=off tank0
zfs create  -p tank0/boot
Running: zfs create  -p tank0/boot
Running: zfs set mountpoint=/mnt/boot tank0/boot
Running: zfs set UFSBOOT tank0/boot
missing value in property=value argument
usage:
	set <property=value> <filesystem|volume|snapshot> ...


END PARTIAL PC-SYSINSTALL LOG CONTENTS.


Third attempt:

Results - Failure.

Restarted installation.

Installation was configured for ufs+sj, encryption, gnome:

Installer raised error condition as above for second attempt.


Fourth attempt:

Results - Success.

Restarted installation.

Installation was configured for zfs, gnome.

Installation was uneventful.


COMPLETE PC-SYSINSTALL LOG FOR SECOND ATTEMPT AT INSTALLATION FOLLOWS:

# PC-SYSINSTALL LOG
kern.geom.debugflags: 0 -> 16
Running gpart modify on /dev/ada0
Running: gpart modify -t freebsd -i 3 /dev/ada0
ada0s3 modified
Cleaning up /dev/ada0s3
Running: dd if=/dev/zero of=/dev/ada0s3 count=1024
1024+0 records in
1024+0 records out
524288 bytes transferred in 0.426183 secs (1230195 bytes/sec)
Running: gpart create -s BSD /dev/ada0s3
ada0s3 created
Running: gpart add -s 1028M -t freebsd-ufs -i 1 /dev/ada0s3
ada0s3a added
Running: gpart add  -t freebsd-zfs -i 2 /dev/ada0s3
ada0s3b added
Running: gpart bootcode -b /boot/boot /dev/ada0s3
bootcode written to ada0s3
NEWFS: /dev/ada0s3a - UFS+SUJ
Running: newfs  -U /dev/ada0s3a
/dev/ada0s3a: 1028.0MB (2105344 sectors) block size 32768, fragment
size 4096 using 4 cylinder groups of 257.03MB, 8225 blks, 33024 inodes.
	with soft updates
super-block backups (for fsck -b #) at:
 192, 526592, 1052992, 1579392
Running: sync
Running: tunefs -j enable /dev/ada0s3a
tunefs: soft updates journaling set
Using inode 4 in cg 0 for 8421376 byte journal
Running: sync
Running: glabel label boot0 /dev/ada0s3a
Running: sync
NEWFS: /dev/ada0s3b - ZFS
Running: zpool create -m none -f tank0 /dev/ada0s3b
Running: zfs set atime=off tank0
zfs create  -p tank0/boot
Running: zfs create  -p tank0/boot
Running: zfs set mountpoint=/mnt/boot tank0/boot
Running: zfs set UFSBOOT tank0/boot
missing value in property=value argument
usage:
	set <property=value> <filesystem|volume|snapshot> ...

The following properties are supported:

	PROPERTY       EDIT  INHERIT   VALUES

	available        NO       NO   <size>
	clones           NO       NO   <dataset>[,...]
	compressratio    NO       NO   <1.00x or higher if compressed>
	creation         NO       NO   <date>
	defer_destroy    NO       NO   yes | no
	mounted          NO       NO   yes | no
	origin           NO       NO   <snapshot>
	refcompressratio  NO       NO   <1.00x or higher if compressed>
	referenced       NO       NO   <size>
	type             NO       NO   filesystem | volume | snapshot
	used             NO       NO   <size>
	usedbychildren   NO       NO   <size>
	usedbydataset    NO       NO   <size>
	usedbyrefreservation  NO       NO   <size>
	usedbysnapshots  NO       NO   <size>
	userrefs         NO       NO   <count>
	written          NO       NO   <size>
	aclinherit      YES      YES   discard | noallow | restricted |
	passthrough | passthrough-x aclmode         YES      YES
	discard | groupmask | passthrough atime           YES
	YES   on | off canmount        YES       NO   on | off | noauto
	casesensitivity  NO      YES   sensitive | insensitive | mixed
	checksum        YES      YES   on | off | fletcher2 | fletcher4
	| sha256 compression     YES      YES   on | off | lzjb | gzip
	| gzip-[1-9] | zle copies          YES      YES   1 | 2 | 3
	dedup           YES      YES   on | off | verify |
	sha256[,verify] devices         YES      YES   on | off
	exec            YES      YES   on | off
	jailed          YES      YES   on | off
	logbias         YES      YES   latency | throughput
	mlslabel        YES      YES   <sensitivity label>
	mountpoint      YES      YES   <path> | legacy | none
	nbmand          YES      YES   on | off
	normalization    NO      YES   none | formC | formD | formKC |
	formKD primarycache    YES      YES   all | none | metadata
	quota           YES       NO   <size> | none
	readonly        YES      YES   on | off
	recordsize      YES      YES   512 to 128k, power of 2
	refquota        YES       NO   <size> | none
	refreservation  YES       NO   <size> | none
	reservation     YES       NO   <size> | none
	secondarycache  YES      YES   all | none | metadata
	setuid          YES      YES   on | off
	sharenfs        YES      YES   on | off | share(1M) options
	sharesmb        YES      YES   on | off | sharemgr(1M) options
	snapdir         YES      YES   hidden | visible
	sync            YES      YES   standard | always | disabled
	utf8only         NO      YES   on | off
	version         YES       NO   1 | 2 | 3 | 4 | 5 | current
	volblocksize     NO      YES   512 to 128k, power of 2
	volsize         YES       NO   <size>
	vscan           YES      YES   on | off
	xattr           YES      YES   on | off
	userused at ...     NO       NO   <size>
	groupused at ...    NO       NO   <size>
	userquota at ...   YES       NO   <size> | none
	groupquota at ...  YES       NO   <size> | none
	written@<snap>   NO       NO   <size>

Sizes are specified in bytes with standard units such as K, M, G, etc.

User-defined properties can be specified by using a name containing a
colon (:).

The {user|group}{used|quota}@ properties must be appended with
a user or group specifier of one of these forms:
    POSIX name      (eg: "matt")
    POSIX id        (eg: "126829")
    SMB name at domain (eg: "matt at sun")
    SMB SID         (eg: "S-1-234-567-89")
EXITERROR: Error 2: zfs set UFSBOOT tank0/boot

# PC-SYSINSTALL CFG 
# Auto-Generated pc-sysinstall configuration
installInteractive=no
installMode=fresh
installType=PCBSD
packageType=tar

netSaveDev=AUTO-DHCP-SLAAC
installMedium=dvd
 
# Disk Setup for ada0
disk0=ada0
partition=s3
bootManager=none
partscheme=MBR
commitDiskPart

# Partition Setup for ada0(s3)
# All sizes are expressed in MB
# Avail FS Types, UFS, UFS+S, UFS+SUJ, UFS+J, ZFS, SWAP
# UFS.eli, UFS+S.eli, UFS+SUJ, UFS+J.eli, ZFS.eli, SWAP.eli
disk0-part=UFS+SUJ 1028 /boot
disk0-part=ZFS
0 /boot(UFSBOOT),/,/swap(volsize=2G|org.freebsd:swap=on|checksum=off),/root,/tmp(compress=lzjb),/usr(canmount=off),/usr/home,/usr/local,/usr/obj(compress=lzjb),/usr/pbi,/usr/ports(compress=gzip),/usr/ports/distfiles(compress=off),/usr/src(compress=gzip),/var(canmount=off),/var/audit(compress=lzjb),/var/log(compress=gzip),/var/tmp(compress=lzjb)
encpass=DearestHenry090708 at pcbsd9.1! commitDiskLabel

runExtCommand=/root/save-config.sh
runExtCommand=mount -t devfs devfs ${FSMNT}/dev
runCommand=touch /var/.runxsetup
runCommand=cp -R /boot/kernel /boot/kernel.pcbsd
runCommand=/usr/local/bin/pc-xdgutil updatemenu
runExtCommand=cp /etc/X11/xorg.conf
${FSMNT}/usr/local/share/pcbsd/xorg-gui/conf/xorg.conf.basic
runExtCommand=sh /root/insMetaPkgs.sh
base-system,GNOME,GNOME-Accessibility,GNOME-Games,GNOME-Net,GNOME-Utilities
CD pcbsd runCommand=sh /usr/local/share/pcbsd/scripts/sys-init.sh
runCommand=touch /var/.pcbsd-firstboot
runCommand=touch /var/.pcbsd-firstgui runExtCommand=umount ${FSMNT}/dev

# DMESG OUTPUT 
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights
reserved. FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-STABLE #12: Wed May 30 11:16:35 PDT 2012
    root at build9x64.pcbsd.org:/usr/obj/builds/amd64/pcbsd-build90/fbsd-source/9.0/sys/GENERIC
amd64 CPU: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz (2394.62-MHz
K8-class CPU) Origin = "GenuineIntel"  Id = 0x206a7  Family = 6  Model
= 2a  Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x1dbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 7995666432 (7625 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <_ASUS_ Notebook>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ACPI Warning: 32/64X FACS address mismatch in FADT -
0xB2FE4E40/0x00000000B2FE4D40, using 32 (20110527/tbfadt-517) ioapic0
<Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
aesni0: No AESNI support.
acpi0: <_ASUS_ Notebook> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x1b, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xe000-0xe03f mem
0xddc00000-0xddffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on
pci0 agp0: <SandyBridge mobile GT2 IG> on vgapci0 agp0: aperture size
is 256M, detected 196604k stolen memory pci0: <simple comms> at device
22.0 (no driver attached) ehci0: <EHCI (generic) USB 2.0 controller>
mem 0xdfe08000-0xdfe083ff irq 16 at device 26.0 on pci0 usbus0: EHCI
version 1.0 usbus0 on ehci0
hdac0: <Intel Cougar Point HDA Controller> mem 0xdfe00000-0xdfe03fff
irq 22 at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 16 at
device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
ath0: <Atheros 9285> mem 0xdea00000-0xdea0ffff irq 17 at device 0.0 on
pci2 [ath] AR9285E_20 detected; using XE TX gain tables
ath0: AR9285 mac 192.2 RF5133 phy 14.0
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci3: <ACPI PCI bus> on pcib3
alc0: <Atheros AR8151 v2.0 PCIe Gigabit Ethernet> port 0xb000-0xb07f
mem 0xde000000-0xde03ffff irq 17 at device 0.0 on pci3 alc0: 11776 Tx
FIFO, 12032 Rx FIFO alc0: Using 1 MSI message(s).
miibus0: <MII bus> on alc0
atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0
atphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow alc0: Ethernet
address: 54:04:a6:31:3c:ae ehci1: <EHCI (generic) USB 2.0 controller>
mem 0xdfe07000-0xdfe073ff irq 23 at device 29.0 on pci0 usbus1: EHCI
version 1.0 usbus1 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port
0xe0b0-0xe0b7,0xe0a0-0xe0a3,0xe090-0xe097,0xe080-0xe083,0xe060-0xe07f
mem 0xdfe06000-0xdfe067ff irq 19 at device 31.2 on pci0 ahci0: AHCI
v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI
channel> at channel 0 on ahci0 ahcich2: <AHCI channel> at channel 2 on
channel> ahci0 pci0: <serial bus, SMBus> at device 31.3 (no driver
channel> attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
  Failed to read extended capability bits
psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0 ppc0: cannot reserve I/O port range
ctl: CAM Target Layer loaded
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
ZFS filesystem version 5
ZFS storage pool version 28
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC269 HDA CODEC Audio Function Group> at nid 1 on
hdacc0 pcm0: <Realtek ALC269 HDA CODEC PCM (Analog 2.0+HP/2.0)> at nid
20,33 and 24,25 on hdaa0 hdacc1: <Intel Cougar Point HDA CODEC> at cad
3 on hdac0 hdaa1: <Intel Cougar Point HDA CODEC Audio Function Group>
at nid 1 on hdacc1 pcm1: <Intel Cougar Point HDA CODEC PCM (HDMI/DP
8ch)> at nid 6 on hdaa1 usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2>
on usbus0 ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2>
on usbus1 uhub2: 6 ports with 6 removable, self powered
uhub3: 6 ports with 6 removable, self powered
ugen1.3: <vendor 0x0d62> at usbus1
ums0: <vendor 0x0d62 product 0x0530, class 0/0, rev 1.10/3.10, addr 3>
on usbus1 ums0: 3 buttons and [XYZ] coordinates ID=0
ugen0.3: <Azurewave> at usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Hitachi HTS547550A9E384 JE3OA60A> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
cd0 at ahcich2 bus 0 scbus1 target 0 lun 0
cd0: <MATSHITA DVD-RAM UJ8B0 1.00> Removable CD-ROM SCSI-0 device 
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO
8192bytes) cd0: Attempt to query device size failed: NOT READY, Medium
not present - tray closed ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
Timecounter "TSC-low" frequency 9353982 Hz quality 1000
Trying to mount root from zfs:tank0 []...
Cuse4BSD v0.1.23 @ /dev/cuse
ppc0: cannot reserve I/O port range
wlan0: Ethernet address: e0:b9:a5:cd:ca:11
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
wlan0: link state changed to DOWN
wlan0: link state changed to UP
Waiting (max 60 seconds) for system process `vnlru' to stop...done
Waiting (max 60 seconds) for system process `bufdaemon' to stop...done

Waiting (max 60 seconds) for system process `syncer' to stop...Syncing
disks, vnodes remaining...0 0 0 0 0 done All buffers synced.
Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights
reserved. FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.0-STABLE #12: Wed May 30 11:16:35 PDT 2012
    root at build9x64.pcbsd.org:/usr/obj/builds/amd64/pcbsd-build90/fbsd-source/9.0/sys/GENERIC
amd64 CPU: Intel(R) Core(TM) i5-2430M CPU @ 2.40GHz (2394.61-MHz
K8-class CPU) Origin = "GenuineIntel"  Id = 0x206a7  Family = 6  Model
= 2a  Stepping = 7
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x1dbae3bf<SSE3,PCLMULQDQ,DTES64,MON,DS_CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,TSCDLT,XSAVE,OSXSAVE,AVX>
AMD Features=0x28100800<SYSCALL,NX,RDTSCP,LM> AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 8589934592 (8192 MB)
avail memory = 7958605824 (7589 MB)
Event timer "LAPIC" quality 600
ACPI APIC Table: <_ASUS_ Notebook>
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s) x 2 SMT threads
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ACPI Warning: 32/64X FACS address mismatch in FADT -
0xB2FE4E40/0x00000000B2FE4D40, using 32 (20110527/tbfadt-517) ioapic0
<Version 2.0> irqs 0-23 on motherboard kbd1 at kbdmux0
ctl: CAM Target Layer loaded
acpi0: <_ASUS_ Notebook> on motherboard
acpi_ec0: <Embedded Controller: GPE 0x1b, ECDT> port 0x62,0x66 on acpi0
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 550
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
Event timer "HPET4" frequency 14318180 Hz quality 440
atrtc0: <AT realtime clock> port 0x70-0x77 irq 8 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 irq 0 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xe000-0xe03f mem
0xddc00000-0xddffffff,0xc0000000-0xcfffffff irq 16 at device 2.0 on
pci0 agp0: <SandyBridge mobile GT2 IG> on vgapci0 agp0: aperture size
is 256M, detected 196604k stolen memory pci0: <simple comms> at device
22.0 (no driver attached) ehci0: <EHCI (generic) USB 2.0 controller>
mem 0xdfe08000-0xdfe083ff irq 16 at device 26.0 on pci0 usbus0: EHCI
version 1.0 usbus0 on ehci0
hdac0: <Intel Cougar Point HDA Controller> mem 0xdfe00000-0xdfe03fff
irq 22 at device 27.0 on pci0 pcib1: <ACPI PCI-PCI bridge> irq 16 at
device 28.0 on pci0 pci1: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 17 at device 28.1 on pci0
pci2: <ACPI PCI bus> on pcib2
ath0: <Atheros 9285> mem 0xdea00000-0xdea0ffff irq 17 at device 0.0 on
pci2 [ath] AR9285E_20 detected; using XE TX gain tables
ath0: AR9285 mac 192.2 RF5133 phy 14.0
pcib3: <ACPI PCI-PCI bridge> irq 17 at device 28.5 on pci0
pci3: <ACPI PCI bus> on pcib3
alc0: <Atheros AR8151 v2.0 PCIe Gigabit Ethernet> port 0xb000-0xb07f
mem 0xde000000-0xde03ffff irq 17 at device 0.0 on pci3 alc0: 11776 Tx
FIFO, 12032 Rx FIFO alc0: Using 1 MSI message(s).
miibus0: <MII bus> on alc0
atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0
atphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX,
1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow alc0: Ethernet
address: 54:04:a6:31:3c:ae ehci1: <EHCI (generic) USB 2.0 controller>
mem 0xdfe07000-0xdfe073ff irq 23 at device 29.0 on pci0 usbus1: EHCI
version 1.0 usbus1 on ehci1
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel Cougar Point AHCI SATA controller> port
0xe0b0-0xe0b7,0xe0a0-0xe0a3,0xe090-0xe097,0xe080-0xe083,0xe060-0xe07f
mem 0xdfe06000-0xdfe067ff irq 19 at device 31.2 on pci0 ahci0: AHCI
v1.30 with 6 6Gbps ports, Port Multiplier not supported ahcich0: <AHCI
channel> at channel 0 on ahci0 ahcich2: <AHCI channel> at channel 2 on
channel> ahci0 pci0: <serial bus, SMBus> at device 31.3 (no driver
channel> attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Sleep Button> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
  Failed to read extended capability bits
psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
orm0: <ISA Option ROM> at iomem 0xc0000-0xce7ff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on
isa0 ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
est2: <Enhanced SpeedStep Frequency Control> on cpu2
p4tcc2: <CPU Frequency Thermal Control> on cpu2
est3: <Enhanced SpeedStep Frequency Control> on cpu3
p4tcc3: <CPU Frequency Thermal Control> on cpu3
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC269 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC269 HDA CODEC Audio Function Group> at nid 1 on
hdacc0 pcm0: <Realtek ALC269 HDA CODEC PCM (Analog 2.0+HP/2.0)> at nid
20,33 and 24,25 on hdaa0 hdacc1: <Intel Cougar Point HDA CODEC> at cad
3 on hdac0 hdaa1: <Intel Cougar Point HDA CODEC Audio Function Group>
at nid 1 on hdacc1 pcm1: <Intel Cougar Point HDA CODEC PCM (HDMI/DP
8ch)> at nid 6 on hdaa1 md0: Preloaded image </boot/mfsroot> 40960000
bytes at 0xffffffff81526de0 usbus0: 480Mbps High Speed USB v2.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
ugen0.2: <vendor 0x8087> at usbus0
uhub2: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2>
on usbus0 ugen1.2: <vendor 0x8087> at usbus1
uhub3: <vendor 0x8087 product 0x0024, class 9/0, rev 2.00/0.00, addr 2>
on usbus1 uhub2: 6 ports with 6 removable, self powered
uhub3: 6 ports with 6 removable, self powered
ugen1.3: <vendor 0x0d62> at usbus1
ums0: <vendor 0x0d62 product 0x0530, class 0/0, rev 1.10/3.10, addr 3>
on usbus1 ums0: 3 buttons and [XYZ] coordinates ID=0
ugen0.3: <Azurewave> at usbus0
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <Hitachi HTS547550A9E384 JE3OA60A> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 476940MB (976773168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
SMP: AP CPU #1 Launched!
cd0 at ahcich2 bus 0 scbus1 target 0 lun 0
cd0: <MATSHITA DVD-RAM UJ8B0 1.00> Removable CD-ROM SCSI-0 device 
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO
8192bytes) cd0: cd present [1649120 x 2048 byte records]
SMP: AP CPU #3 Launched!
SMP: AP CPU #2 Launched!
Timecounter "TSC-low" frequency 9353935 Hz quality 1000
Trying to mount root from ufs:/dev/ufs/ROOTFS []...
md1.uzip: 64718 x 65536 blocks
warning: KLD '/boot/kernel/ng_ubt.ko' is newer than the linker.hints
file warning: KLD '/boot/kernel/ng_hci.ko' is newer than the
linker.hints file warning: KLD '/boot/kernel/ng_bluetooth.ko' is newer
than the linker.hints file warning: KLD '/boot/kernel/netgraph.ko' is
newer than the linker.hints file warning: KLD '/boot/kernel/ntfs.ko' is
newer than the linker.hints file warning: KLD
'/boot/kernel/ntfs_iconv.ko' is newer than the linker.hints file
warning: KLD '/boot/kernel/udf.ko' is newer than the linker.hints file
warning: KLD '/boot/kernel/udf_iconv.ko' is newer than the linker.hints
file cryptosoft0: <software crypto> on motherboard warning: KLD
'/boot/kernel/linux.ko' is newer than the linker.hints file warning:
KLD '/boot/kernel/opensolaris.ko' is newer than the linker.hints file
ZFS filesystem version 5 ZFS storage pool version 28
drm0: <Intel SandyBridge (M)> on vgapci0
info: [drm] MSI enabled 1 message(s)
info: [drm] AGP at 0xc0000000 256MB
iicbus0: <Philips I2C bus> on iicbb0 addr 0xff
iic0: <I2C generic I/O> on iicbus0
iic1: <I2C generic I/O> on iicbus1
iicbus2: <Philips I2C bus> on iicbb1 addr 0xff
iic2: <I2C generic I/O> on iicbus2
iic3: <I2C generic I/O> on iicbus3
iicbus4: <Philips I2C bus> on iicbb2 addr 0xff
iic4: <I2C generic I/O> on iicbus4
iic5: <I2C generic I/O> on iicbus5
iicbus6: <Philips I2C bus> on iicbb3 addr 0xff
iic6: <I2C generic I/O> on iicbus6
iic7: <I2C generic I/O> on iicbus7
iicbus8: <Philips I2C bus> on iicbb4 addr 0xff
iic8: <I2C generic I/O> on iicbus8
iic9: <I2C generic I/O> on iicbus9
iicbus10: <Philips I2C bus> on iicbb5 addr 0xff
iic10: <I2C generic I/O> on iicbus10
iic11: <I2C generic I/O> on iicbus11
iicbus12: <Philips I2C bus> on iicbb6 addr 0xff
iic12: <I2C generic I/O> on iicbus12
iic13: <I2C generic I/O> on iicbus13
iicbus14: <Philips I2C bus> on iicbb7 addr 0xff
iic14: <I2C generic I/O> on iicbus14
iic15: <I2C generic I/O> on iicbus15
info: [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
info: [drm] Driver supports precise vblank timestamp query.
[drm:KMS:pid1392:intel_detect_pch] Found CougarPoint PCH
[drm:KMS:pid1392:init_vbt_defaults] Set default to SSC at 100MHz
[drm:KMS:pid1392:intel_parse_bios] Using VBT from OpRegion: $VBT
SNB/IVB-MOBILE d [drm:KMS:pid1392:parse_general_features]
BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1
lvds_ssc_freq 120 display_clock_mode 0
[drm:KMS:pid1392:parse_general_definitions] crt_ddc_bus_pin: 2
[drm:KMS:pid1392:parse_lfp_panel_data] Found panel mode in BIOS VBT
tables: [drm:KMS:pid1392:drm_mode_debug_printmodeline] Modeline
0:"1366x768" 0 78050 1366 1414 1446 1646 768 770 775 790 0x8 0xa
[drm:KMS:pid1392:parse_sdvo_panel_data] Found SDVO panel mode in BIOS
VBT tables: [drm:KMS:pid1392:drm_mode_debug_printmodeline] Modeline
0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[drm:KMS:pid1392:parse_sdvo_device_mapping] No SDVO device info is
found in VBT [drm:KMS:pid1392:intel_modeset_init] 2 display pipes
available. [drm:KMS:pid1392:intel_crt_init] pch crt adpa set to
0xf40000 [drm:KMS:pid1392:intel_setup_outputs] HDMIB 0 PCH_DP_B 0 HDMIC
1 HDMID 0 PCH_DP_C 1 PCH_DP_D 0 LVDS 1
[drm:KMS:pid1392:intel_dp_i2c_init] i2c_init DPDDC-C
[drm:KMS:pid1392:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1392:intel_dp_i2c_aux_ch] aux_ch failed -60
[drm:KMS:pid1392:intel_dp_aux_ch] dp_aux_ch timeout status 0x5145003f
[drm:KMS:pid1392:intel_dp_i2c_aux_ch] aux_ch failed -60
[drm:KMS:pid1392:ironlake_crtc_dpms] crtc 0/0 dpms off
[drm:KMS:pid1392:intel_update_fbc] [drm:KMS:pid1392:intel_update_fbc]
no output, disabling [drm:KMS:pid1392:ironlake_crtc_dpms] crtc 1/1 dpms
off [drm:KMS:pid1392:intel_update_fbc]
[drm:KMS:pid1392:intel_update_fbc] no output, disabling
[drm:KMS:pid1392:ironlake_init_pch_refclk] has_panel 1 has_lvds 1
has_pch_edp 0 has_cpu_edp 0 has_ck505 0
[drm:KMS:pid1392:ironlake_init_pch_refclk] Using SSC on panel info:
[drm] Enabling RC6 states: RC6 off, RC6p off, RC6pp off drm0: taking
over the fictitious range 0xc0000000-0xd0000000
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:7:LVDS-1]
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:7:LVDS-1] probed modes :
[drm:KMS:pid1392:drm_mode_debug_printmodeline] Modeline 21:"1366x768"
60 78050 1366 1414 1446 1646 768 770 775 790 0x48 0xa
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:13:VGA-1]
[drm:KMS:pid1392:intel_ironlake_crt_detect_hotplug] trigger hotplug
detect cycle: adpa=0xf40000
[drm:KMS:pid1392:intel_ironlake_crt_detect_hotplug] ironlake hotplug
adpa=0xf40000, result 0 [drm:KMS:pid1392:intel_crt_detect] CRT not
detected via hotplug
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:13:VGA-1] disconnected
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:16:HDMI-A-1] [drm:KMS:pid1392:drm_do_probe_ddc_edid]
iicbus_transfer countdown 5 error 5
[drm:KMS:pid1392:drm_do_probe_ddc_edid] iicbus_transfer countdown 4
error 5 [drm:KMS:pid1392:drm_do_probe_ddc_edid] iicbus_transfer
countdown 3 error 5 [drm:KMS:pid1392:drm_do_probe_ddc_edid]
iicbus_transfer countdown 2 error 5
[drm:KMS:pid1392:drm_do_probe_ddc_edid] iicbus_transfer countdown 1
error 5 [drm:KMS:pid1392:intel_hdmi_detect] [CONNECTOR:16:HDMI-A-1] got
no edid, ddc port 4
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:16:HDMI-A-1] disconnected
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:19:DP-1] [drm:KMS:pid1392:intel_dp_aux_ch] dp_aux_ch timeout
status 0x5145003f [drm:KMS:pid1392:intel_dp_aux_ch] dp_aux_ch timeout
status 0x5145003f [drm:KMS:pid1392:intel_dp_aux_ch] dp_aux_ch timeout
status 0x5145003f
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:19:DP-1] disconnected [drm:KMS:pid1392:drm_setup_crtcs]
[drm:KMS:pid1392:drm_enable_connectors] connector 7 enabled? yes
[drm:KMS:pid1392:drm_enable_connectors] connector 13 enabled? no
[drm:KMS:pid1392:drm_enable_connectors] connector 16 enabled? no
[drm:KMS:pid1392:drm_enable_connectors] connector 19 enabled? no
[drm:KMS:pid1392:drm_target_preferred] looking for cmdline mode on
connector 7 [drm:KMS:pid1392:drm_target_preferred] looking for
preferred mode on connector 7 [drm:KMS:pid1392:drm_target_preferred]
found mode 1366x768 [drm:KMS:pid1392:drm_setup_crtcs] picking CRTCs for
8192x8192 config [drm:KMS:pid1392:drm_setup_crtcs] desired mode
1366x768 set on crtc 3 [drm:KMS:pid1392:intelfb_create] allocated
1366x768 fb: 0x00064000, bo 0xfffffe00097f0200 info: [drm] Initialized
i915 1.6.0 20080730 [drm:KMS:pid1392:drm_mode_getresources] CRTC[2]
CONNECTORS[4] ENCODERS[4] [drm:KMS:pid1392:drm_mode_getresources]
[CRTC:3] [drm:KMS:pid1392:drm_mode_getresources] [CRTC:5]
[drm:KMS:pid1392:drm_mode_getresources] [ENCODER:8:LVDS-8]
[drm:KMS:pid1392:drm_mode_getresources] [ENCODER:14:DAC-14]
[drm:KMS:pid1392:drm_mode_getresources] [ENCODER:15:TMDS-15]
[drm:KMS:pid1392:drm_mode_getresources] [ENCODER:20:TMDS-20]
[drm:KMS:pid1392:drm_mode_getresources] [CONNECTOR:7:LVDS-1]
[drm:KMS:pid1392:drm_mode_getresources] [CONNECTOR:13:VGA-1]
[drm:KMS:pid1392:drm_mode_getresources] [CONNECTOR:16:HDMI-A-1]
[drm:KMS:pid1392:drm_mode_getresources] [CONNECTOR:19:DP-1]
[drm:KMS:pid1392:drm_mode_getresources] CRTC[2] CONNECTORS[4]
ENCODERS[4] [drm:KMS:pid1392:drm_mode_getconnector] [CONNECTOR:7:?]
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:7:LVDS-1]
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:7:LVDS-1] probed modes :
[drm:KMS:pid1392:drm_mode_debug_printmodeline] Modeline 21:"1366x768"
60 78050 1366 1414 1446 1646 768 770 775 790 0x48 0xa
[drm:KMS:pid1392:drm_mode_getconnector] [CONNECTOR:7:?]
[drm:KMS:pid1392:drm_mode_getconnector] [CONNECTOR:13:?]
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:13:VGA-1]
[drm:KMS:pid1392:intel_ironlake_crt_detect_hotplug] ironlake hotplug
adpa=0xf40000, result 0 [drm:KMS:pid1392:intel_crt_detect] CRT not
detected via hotplug
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:13:VGA-1] disconnected
[drm:KMS:pid1392:drm_mode_getconnector] [CONNECTOR:13:?]
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:13:VGA-1]
[drm:KMS:pid1392:intel_ironlake_crt_detect_hotplug] ironlake hotplug
adpa=0xf40000, result 0 [drm:KMS:pid1392:intel_crt_detect] CRT not
detected via hotplug
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:13:VGA-1] disconnected
[drm:KMS:pid1392:drm_mode_getconnector] [CONNECTOR:16:?]
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:16:HDMI-A-1] [drm:KMS:pid1392:drm_do_probe_ddc_edid]
iicbus_transfer countdown 5 error 5
[drm:KMS:pid1392:drm_do_probe_ddc_edid] iicbus_transfer countdown 4
error 5 [drm:KMS:pid1392:drm_do_probe_ddc_edid] iicbus_transfer
countdown 3 error 5 [drm:KMS:pid1392:drm_do_probe_ddc_edid]
iicbus_transfer countdown 2 error 5
[drm:KMS:pid1392:drm_do_probe_ddc_edid] iicbus_transfer countdown 1
error 5 [drm:KMS:pid1392:intel_hdmi_detect] [CONNECTOR:16:HDMI-A-1] got
no edid, ddc port 4
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:16:HDMI-A-1] disconnected
[drm:KMS:pid1392:drm_mode_getconnector] [CONNECTOR:16:?]
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:16:HDMI-A-1] [drm:KMS:pid1392:drm_do_probe_ddc_edid]
iicbus_transfer countdown 5 error 5
[drm:KMS:pid1392:drm_do_probe_ddc_edid] iicbus_transfer countdown 4
error 5 [drm:KMS:pid1392:drm_do_probe_ddc_edid] iicbus_transfer
countdown 3 error 5 [drm:KMS:pid1392:drm_do_probe_ddc_edid]
iicbus_transfer countdown 2 error 5
[drm:KMS:pid1392:drm_do_probe_ddc_edid] iicbus_transfer countdown 1
error 5 [drm:KMS:pid1392:intel_hdmi_detect] [CONNECTOR:16:HDMI-A-1] got
no edid, ddc port 4
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:16:HDMI-A-1] disconnected
[drm:KMS:pid1392:drm_mode_getconnector] [CONNECTOR:19:?]
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:19:DP-1] [drm:KMS:pid1392:intel_dp_aux_ch] dp_aux_ch timeout
status 0x5145003f [drm:KMS:pid1392:intel_dp_aux_ch] dp_aux_ch timeout
status 0x5145003f [drm:KMS:pid1392:intel_dp_aux_ch] dp_aux_ch timeout
status 0x5145003f
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:19:DP-1] disconnected
[drm:KMS:pid1392:drm_mode_getconnector] [CONNECTOR:19:?]
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:19:DP-1] [drm:KMS:pid1392:intel_dp_aux_ch] dp_aux_ch timeout
status 0x5145003f [drm:KMS:pid1392:intel_dp_aux_ch] dp_aux_ch timeout
status 0x5145003f [drm:KMS:pid1392:intel_dp_aux_ch] dp_aux_ch timeout
status 0x5145003f
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:19:DP-1] disconnected
[drm:KMS:pid1392:drm_mode_getconnector] [CONNECTOR:7:?]
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:7:LVDS-1]
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:7:LVDS-1] probed modes :
[drm:KMS:pid1392:drm_mode_debug_printmodeline] Modeline 21:"1366x768"
60 78050 1366 1414 1446 1646 768 770 775 790 0x48 0xa
[drm:KMS:pid1392:drm_mode_getconnector] [CONNECTOR:7:?]
[drm:KMS:pid1392:drm_mode_getconnector] [CONNECTOR:13:?]
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:13:VGA-1]
[drm:KMS:pid1392:intel_ironlake_crt_detect_hotplug] ironlake hotplug
adpa=0xf40000, result 0 [drm:KMS:pid1392:intel_crt_detect] CRT not
detected via hotplug
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:13:VGA-1] disconnected
[drm:KMS:pid1392:drm_mode_getconnector] [CONNECTOR:13:?]
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:13:VGA-1]
[drm:KMS:pid1392:intel_ironlake_crt_detect_hotplug] ironlake hotplug
adpa=0xf40000, result 0 [drm:KMS:pid1392:intel_crt_detect] CRT not
detected via hotplug
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:13:VGA-1] disconnected
[drm:KMS:pid1392:drm_mode_getconnector] [CONNECTOR:16:?]
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:16:HDMI-A-1] [drm:KMS:pid1392:drm_do_probe_ddc_edid]
iicbus_transfer countdown 5 error 5
[drm:KMS:pid1392:drm_do_probe_ddc_edid] iicbus_transfer countdown 4
error 5 [drm:KMS:pid1392:drm_do_probe_ddc_edid] iicbus_transfer
countdown 3 error 5 [drm:KMS:pid1392:drm_do_probe_ddc_edid]
iicbus_transfer countdown 2 error 5
[drm:KMS:pid1392:drm_do_probe_ddc_edid] iicbus_transfer countdown 1
error 5 [drm:KMS:pid1392:intel_hdmi_detect] [CONNECTOR:16:HDMI-A-1] got
no edid, ddc port 4
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:16:HDMI-A-1] disconnected
[drm:KMS:pid1392:drm_mode_getconnector] [CONNECTOR:16:?]
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:16:HDMI-A-1] [drm:KMS:pid1392:drm_do_probe_ddc_edid]
iicbus_transfer countdown 5 error 5
[drm:KMS:pid1392:drm_do_probe_ddc_edid] iicbus_transfer countdown 4
error 5 [drm:KMS:pid1392:drm_do_probe_ddc_edid] iicbus_transfer
countdown 3 error 5 [drm:KMS:pid1392:drm_do_probe_ddc_edid]
iicbus_transfer countdown 2 error 5
[drm:KMS:pid1392:drm_do_probe_ddc_edid] iicbus_transfer countdown 1
error 5 [drm:KMS:pid1392:intel_hdmi_detect] [CONNECTOR:16:HDMI-A-1] got
no edid, ddc port 4
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:16:HDMI-A-1] disconnected
[drm:KMS:pid1392:drm_mode_getconnector] [CONNECTOR:19:?]
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:19:DP-1] [drm:KMS:pid1392:intel_dp_aux_ch] dp_aux_ch timeout
status 0x5145003f [drm:KMS:pid1392:intel_dp_aux_ch] dp_aux_ch timeout
status 0x5145003f [drm:KMS:pid1392:intel_dp_aux_ch] dp_aux_ch timeout
status 0x5145003f
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:19:DP-1] disconnected
[drm:KMS:pid1392:drm_mode_getconnector] [CONNECTOR:19:?]
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:19:DP-1] [drm:KMS:pid1392:intel_dp_aux_ch] dp_aux_ch timeout
status 0x5145003f [drm:KMS:pid1392:intel_dp_aux_ch] dp_aux_ch timeout
status 0x5145003f [drm:KMS:pid1392:intel_dp_aux_ch] dp_aux_ch timeout
status 0x5145003f
[drm:KMS:pid1392:drm_helper_probe_single_connector_modes]
[CONNECTOR:19:DP-1] disconnected [drm:KMS:pid1392:drm_mode_addfb]
[FB:23] [drm:KMS:pid1392:drm_mode_setcrtc] [CRTC:3]
[drm:KMS:pid1392:drm_mode_setcrtc] [CONNECTOR:7:LVDS-1]
[drm:KMS:pid1392:drm_crtc_helper_set_config]
[drm:KMS:pid1392:drm_crtc_helper_set_config] [CRTC:3] [FB:23]
#connectors=1 (x y) (0 0) [drm:KMS:pid1392:drm_crtc_helper_set_config]
crtc has no fb, full mode set
[drm:KMS:pid1392:drm_crtc_helper_set_config] modes are different, full
mode set [drm:KMS:pid1392:drm_mode_debug_printmodeline] Modeline 0:"" 0
0 0 0 0 0 0 0 0 0 0x0 0x0
[drm:KMS:pid1392:drm_mode_debug_printmodeline] Modeline 24:"1366x768" 0
78050 1366 1414 1446 1646 768 770 775 790 0x0 0xa
[drm:KMS:pid1392:drm_crtc_helper_set_config] encoder changed, full mode
switch [drm:KMS:pid1392:drm_crtc_helper_set_config] crtc changed, full
mode switch [drm:KMS:pid1392:drm_crtc_helper_set_config]
[CONNECTOR:7:LVDS-1] to [CRTC:3]
[drm:KMS:pid1392:drm_crtc_helper_set_config] attempting to set mode
from userspace [drm:KMS:pid1392:drm_mode_debug_printmodeline] Modeline
24:"1366x768" 0 78050 1366 1414 1446 1646 768 770 775 790 0x0 0xa
[drm:KMS:pid1392:drm_crtc_helper_set_mode] [CRTC:3]
[drm:KMS:pid1392:ironlake_get_refclk] using SSC reference clock of 120
MHz [drm:KMS:pid1392:intel_choose_pipe_bpp_dither] clamping display bpc
(was -1) to LVDS (6) [drm:KMS:pid1392:intel_choose_pipe_bpp_dither]
setting pipe bpc to 8 (max display bpc 6)
[drm:KMS:pid1392:ironlake_crtc_mode_set] Mode for pipe 0:
[drm:KMS:pid1392:drm_mode_debug_printmodeline] Modeline 24:"1366x768" 0
78050 1366 1414 1446 1646 768 770 775 790 0x0 0xa
[drm:KMS:pid1392:intel_wait_for_vblank] vblank wait timed out
[drm:KMS:pid1392:ironlake_update_plane] Writing base 0046C000 00000000
0 0 5632 [drm:KMS:pid1392:intel_update_fbc]
[drm:KMS:pid1392:intel_update_fbc] fbc disabled per module param
[drm:KMS:pid1392:sandybridge_update_wm] FIFO watermarks For pipe A -
plane 6, cursor: 6 [drm:KMS:pid1392:ironlake_check_srwm] watermark 1:
display plane 10, fbc lines 3, cursor 6
[drm:KMS:pid1392:ironlake_check_srwm] watermark 2: display plane 12,
fbc lines 3, cursor 6 [drm:KMS:pid1392:ironlake_check_srwm] watermark
3: display plane 56, fbc lines 3, cursor 6
[drm:KMS:pid1392:drm_crtc_helper_set_mode] [ENCODER:8:LVDS-8] set
[MODE:24:1366x768] [drm:KMS:pid1392:sandybridge_update_wm] FIFO
watermarks For pipe A - plane 6, cursor: 6
[drm:KMS:pid1392:ironlake_check_srwm] watermark 1: display plane 10,
fbc lines 3, cursor 6 [drm:KMS:pid1392:ironlake_check_srwm] watermark
2: display plane 12, fbc lines 3, cursor 6
[drm:KMS:pid1392:ironlake_check_srwm] watermark 3: display plane 56,
fbc lines 3, cursor 6 [drm:KMS:pid1392:intel_wait_for_vblank] vblank
wait timed out [drm:KMS:pid1392:intel_wait_for_vblank] vblank wait
timed out [drm:KMS:pid1392:gen6_fdi_link_train] FDI_RX_IIR 0x700
[drm:KMS:pid1392:gen6_fdi_link_train] FDI train 1 done.
[drm:KMS:pid1392:gen6_fdi_link_train] FDI_RX_IIR 0x600
[drm:KMS:pid1392:gen6_fdi_link_train] FDI train 2 done.
[drm:KMS:pid1392:gen6_fdi_link_train] FDI train done.
[drm:KMS:pid1392:intel_update_fbc] [drm:KMS:pid1392:intel_update_fbc]
fbc disabled per module param
[drm:KMS:pid1392:drm_crtc_helper_set_config] Setting connector DPMS
state to on [drm:KMS:pid1392:drm_crtc_helper_set_config]
[CONNECTOR:7:LVDS-1] set DPMS on
[drm:KMS:pid1392:intel_crtc_cursor_set]
[drm:KMS:pid0:intel_ironlake_crt_detect_hotplug] ironlake hotplug
adpa=0xf40000, result 0 [drm:KMS:pid0:intel_crt_detect] CRT not
detected via hotplug [drm:KMS:pid0:output_poll_execute]
[CONNECTOR:13:VGA-1] status updated from 2 to 2
[drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 5 error
5 [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown 4
error 5 [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer countdown
3 error 5 [drm:KMS:pid0:drm_do_probe_ddc_edid] iicbus_transfer
countdown 2 error 5 [drm:KMS:pid0:drm_do_probe_ddc_edid]
iicbus_transfer countdown 1 error 5 [drm:KMS:pid0:intel_hdmi_detect]
[CONNECTOR:16:HDMI-A-1] got no edid, ddc port 4
[drm:KMS:pid0:output_poll_execute] [CONNECTOR:16:HDMI-A-1] status
updated from 2 to 2 [drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout
status 0x5145003f [drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout
status 0x5145003f [drm:KMS:pid0:intel_dp_aux_ch] dp_aux_ch timeout
status 0x5145003f [drm:KMS:pid0:output_poll_execute]
[CONNECTOR:19:DP-1] status updated from 2 to 2 /tmp: optimization
changed from SPACE to TIME ugen1.4: <Staples> at usbus1 umass0:
<Staples Relay UFD, class 0/0, rev 2.00/1.03, addr 4> on usbus1
umass0:  SCSI over Bulk-Only; quirks = 0x4100 umass0:3:0:-1: Attached
to scbus3 da0 at umass-sim0 bus 0 scbus3 target 0 lun 0 da0: <Staples
Relay UFD 1.10> Removable Direct Access SCSI-2 device da0: 40.000MB/s
transfers da0: 7633MB (15633408 512 byte sectors: 255H 63S/T 973C)

# DISK INFO ada0 
/dev/ada0
/dev/ada0s1
/dev/ada0s2
/dev/ada0s3
/dev/ada0s3a
/dev/ada0s3b
/dev/ada0s4
/dev/ada0s5
/dev/ada0s6
/dev/ada0s7
/dev/ada0s8
=>       63  976773105  ada0  MBR  (465G)
         63       1985        - free -  (992k)
       2048   52428800     1  !28  (25G)
   52430848  390707200     2  ntfs  [active]  (186G)
  443138048  102397952     3  freebsd  (48G)
  545536000       2046        - free -  (1M)
  545538046  431233026     4  ebr  (205G)
  976771072       2096        - free -  (1.0M)


# DISK INFO da0 
/dev/da0
/dev/da0s1
=>       1  15633407  da0  MBR  (7.5G)
         1        31       - free -  (15k)
        32  15633376    1  fat32  (7.5G)


# MOUNT OUTPUT 
/dev/ufs/ROOTFS on / (ufs, local)
devfs on /dev (devfs, local, multilabel)
/dev/md6 on /tmp (ufs, local)
/dev/md2 on /uzip (ufs, local)
/dev/md1.uzip on /usr (ufs, local, read-only) 



END COMPLETE PC-SYSINSTALL LOG CONTENTS.


More information about the Testing mailing list