[PC-BSD Testing] PC-BSD boot loader is not recognizing Debian (ext2fs)

claive alvin Acedilla cabpacedilla at gmail.com
Wed Jul 25 23:04:29 PDT 2012


Debian is installed first with grub.
Then I installed PC-BSD 9.1 Beta1 on the second partition.
When I reboot, PC-BSD boot loader appears with the following menu: F1 for
PC-BSD and F2 for Linux and PXE at the bottom
F1 function key is working to boot PC-BSD but F2 function key does not boot
debian. Debian is in ext2fs format which is supported by PC-BSD.

Im using  PC-BSD 9.1 Beta1 USBLite LXDE ZFS
Attached is my system diagnostic
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.pcbsd.org/pipermail/testing/attachments/20120726/378d6211/attachment-0001.html>
-------------- next part --------------
PC-BSD 9.1-BETA1 Diagnostic Sheet
Generated: Fri Jul 20 08:45:29 AST 2012

-----------------Dmesg Output-------------------------

Copyright (c) 1992-2012 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
	The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 9.1-BETA1 #12: Wed Jul 11 08:25:44 PDT 2012
    root at build9x64.pcbsd.org:/usr/obj/builds/i386/pcbsd-build90/fbsd-source/9.0/sys/GENERIC i386
CPU: Pentium(R) Dual-Core CPU       T4200  @ 2.00GHz (1995.04-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x1067a  Family = 6  Model = 17  Stepping = 10
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x400e39d<SSE3,DTES64,MON,DS_CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,XSAVE>
  AMD Features=0x20100000<NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant, performance statistics
real memory  = 2147483648 (2048 MB)
avail memory = 2010042368 (1916 MB)
Event timer "LAPIC" quality 400
ACPI APIC Table: <ACRSYS ACRPRDCT>
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 4
ioapic0 <Version 2.0> irqs 0-23 on motherboard
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
aesni0: No AESNI support.
acpi0: <ACRSYS ACRPRDCT> on motherboard
acpi0: Power Button (fixed)
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x77 on acpi0
atrtc0: Warning: Couldn't map I/O.
Event timer "RTC" frequency 32768 Hz quality 0
hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff irq 0,8 on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 950
Event timer "HPET" frequency 14318180 Hz quality 450
Event timer "HPET1" frequency 14318180 Hz quality 440
Event timer "HPET2" frequency 14318180 Hz quality 440
Event timer "HPET3" frequency 14318180 Hz quality 440
attimer0: <AT timer> port 0x40-0x43,0x50-0x53 on acpi0
Timecounter "i8254" frequency 1193182 Hz quality 0
Event timer "i8254" frequency 1193182 Hz quality 100
Timecounter "ACPI-fast" frequency 3579545 Hz quality 900
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0
acpi_ec0: <Embedded Controller: GPE 0x1c> port 0x62,0x66 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0x6120-0x6127 mem 0x90000000-0x903fffff,0x80000000-0x8fffffff irq 16 at device 2.0 on pci0
agp0: <Intel GM45 SVGA controller> on vgapci0
agp0: aperture size is 256M, detected 65532k stolen memory
vgapci1: <VGA-compatible display> mem 0x94400000-0x944fffff at device 2.1 on pci0
uhci0: <Intel 82801I (ICH9) USB controller> port 0x60a0-0x60bf irq 20 at device 26.0 on pci0
uhci0: LegSup = 0x2f00
usbus0 on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x6080-0x609f irq 21 at device 26.1 on pci0
uhci1: LegSup = 0x2f00
usbus1 on uhci1
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0x98805400-0x988057ff irq 21 at device 26.7 on pci0
usbus2: EHCI version 1.0
usbus2 on ehci0
hdac0: <Intel 82801I HDA Controller> mem 0x98800000-0x98803fff irq 22 at device 27.0 on pci0
pcib1: <ACPI PCI-PCI bridge> irq 17 at device 28.0 on pci0
pcib1: failed to allocate initial prefetch window: 0x90400000-0x913fffff
pci2: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> irq 16 at device 28.1 on pci0
pci4: <ACPI PCI bus> on pcib2
ath0: <Atheros 9280> mem 0x96700000-0x9670ffff irq 17 at device 0.0 on pci4
ath0: AR9280 mac 128.2 RF5133 phy 13.0
pcib3: <ACPI PCI-PCI bridge> irq 18 at device 28.2 on pci0
pci5: <ACPI PCI bus> on pcib3
ale0: <Atheros AR8121/AR8113/AR8114 PCIe Ethernet> port 0x2000-0x207f mem 0x95600000-0x9563ffff irq 18 at device 0.0 on pci5
ale0: 960 Tx FIFO, 1024 Rx FIFO
ale0: Using 1 MSI messages.
miibus0: <MII bus> on ale0
atphy0: <Atheros F1 10/100/1000 PHY> PHY 0 on miibus0
atphy0:  none, 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
ale0: Ethernet address: 00:23:5a:d8:c1:06
pcib4: <ACPI PCI-PCI bridge> irq 17 at device 28.4 on pci0
pcib4: failed to allocate initial I/O port window: 0x1000-0x1fff
pci7: <ACPI PCI bus> on pcib4
pci7: <base peripheral> at device 0.0 (no driver attached)
sdhci0: <JMicron JMB38X SD> mem 0x94500200-0x945002ff irq 16 at device 0.2 on pci7
sdhci0: 1 slot(s) allocated
pci7: <base peripheral> at device 0.3 (no driver attached)
pci7: <base peripheral> at device 0.4 (no driver attached)
uhci2: <Intel 82801I (ICH9) USB controller> port 0x6060-0x607f irq 23 at device 29.0 on pci0
uhci2: LegSup = 0x2f00
usbus3 on uhci2
uhci3: <Intel 82801I (ICH9) USB controller> port 0x6040-0x605f irq 19 at device 29.1 on pci0
uhci3: LegSup = 0x2f00
usbus4 on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0x6020-0x603f irq 20 at device 29.2 on pci0
uhci4: LegSup = 0x2f00
usbus5 on uhci4
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0x98805000-0x988053ff irq 23 at device 29.7 on pci0
usbus6: EHCI version 1.0
usbus6 on ehci1
pcib5: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci8: <ACPI PCI bus> on pcib5
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH9M SATA300 controller> port 0x6118-0x611f,0x6134-0x6137,0x6110-0x6117,0x6130-0x6133,0x60f0-0x60ff,0x60e0-0x60ef irq 19 at device 31.2 on pci0
ata2: <ATA channel> at channel 0 on atapci0
ata3: <ATA channel> at channel 1 on atapci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
atapci1: <Intel ICH9M SATA300 controller> port 0x6108-0x610f,0x612c-0x612f,0x6100-0x6107,0x6128-0x612b,0x60d0-0x60df,0x60c0-0x60cf irq 19 at device 31.5 on pci0
ata4: <ATA channel> at channel 0 on atapci1
ata5: <ATA channel> at channel 1 on atapci1
pci0: <dasp> at device 31.6 (no driver attached)
acpi_tz0: <Thermal Zone> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
acpi_acad0: <AC Adapter> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button1: <Sleep Button> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: model Generic PS/2 mouse, device ID 0
pmtimer0 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ata0: <ATA channel> at port 0x1f0-0x1f7,0x3f6 irq 14 on isa0
ata1: <ATA channel> at port 0x170-0x177,0x376 irq 15 on isa0
ppc0: parallel port not found.
ctl: CAM Target Layer loaded
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
ZFS NOTICE: Prefetch is disabled by default on i386 -- to enable,
            add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable behavior.
             Consider tuning vm.kmem_size and vm.kmem_size_max
             in /boot/loader.conf.
ZFS filesystem version 5
ZFS storage pool version 28
Timecounters tick every 1.000 msec
hdacc0: <Realtek ALC888 HDA CODEC> at cad 0 on hdac0
hdaa0: <Realtek ALC888 Audio Function Group> at nid 1 on hdacc0
pcm0: <Realtek ALC888 (Analog 2.0+HP/2.0)> at nid 20,21 and 24,26 on hdaa0
pcm1: <Realtek ALC888 (Left Digital)> at nid 30 on hdaa0
pcm2: <Realtek ALC888 (Onboard Analog Mic)> at nid 18 on hdaa0
hdacc1: <Lucent/Agere Systems (0x1040) HDA CODEC> at cad 1 on hdac0
unknown: <Lucent/Agere Systems (0x1040) HDA CODEC Modem Function Group> at nid 1 on hdacc1 (no driver attached)
hdacc2: <Intel Cantiga HDA CODEC> at cad 2 on hdac0
hdaa1: <Intel Cantiga Audio Function Group> at nid 1 on hdacc2
pcm3: <Intel Cantiga (HDMI 8ch)> at nid 3 on hdaa1
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 480Mbps High Speed USB v2.0
usbus3: 12Mbps Full Speed USB v1.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus6
uhub0: 2 ports with 2 removable, self powered
uhub1: 2 ports with 2 removable, self powered
uhub3: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
ada0 at ata2 bus 0 scbus0 target 0 lun 0
ada0: <TOSHIBA MK2555GSX FG001J> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA5, PIO 8192bytes)
ada0: 238475MB (488397168 512 byte sectors: 16H 63S/T 16383C)
ada0: Previously was known as ad4
cd0 at ata3 bus 0 scbus1 target 0 lun 0
cd0: <TSSTcorp CDDVDW TS-L633B AC01> Removable CD-ROM SCSI-0 device 
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
SMP: AP CPU #1 Launched!
Timecounter "TSC-low" frequency 15586242 Hz quality 1000
Root mount waiting for: usbus6 usbus2
uhub2: 4 ports with 4 removable, self powered
uhub6: 6 ports with 6 removable, self powered
Root mount waiting for: usbus6
ugen6.2: <Chicony Electronics Co., Ltd.> at usbus6
Trying to mount root from zfs:tank0/ROOT/default []...
Cuse4BSD v0.1.24 @ /dev/cuse
ppc0: parallel port not found.
SGI XFS with large block numbers, tracing, no debug enabled
wlan0: Ethernet address: 00:17:c4:82:99:7d
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8

-----------------Messages Output----------------------

Jul 20 08:39:30 pcbsd-3627 kernel: fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
Jul 20 08:39:33 pcbsd-3627 anacron[3024]: Anacron 2.3 started on 2012-07-20
Jul 20 08:39:33 pcbsd-3627 anacron[3024]: Will run job `monthly' in 60 min.
Jul 20 08:41:03 pcbsd-3627 dbus[234]: [system] Activating service name='org.freedesktop.UPower' (using servicehelper)
Jul 20 08:41:03 pcbsd-3627 dbus[234]: [system] Successfully activated service 'org.freedesktop.UPower'
Jul 20 08:41:04 pcbsd-3627 gdm-simple-greeter[8567]: Gtk-WARNING: gtkwidget.c:5683: widget not within a GtkWindow
Jul 20 08:41:10 pcbsd-3627 gnome-keyring-daemon[8586]: couldn't allocate secure memory to keep passwords and or keys from being written to the disk
Jul 20 08:41:10 pcbsd-3627 gdm-simple-greeter[8567]: WARNING: Failed to send buffer
Jul 20 08:41:22 pcbsd-3627 gnome-keyring-daemon[8588]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
Jul 20 08:41:22 pcbsd-3627 gnome-keyring-daemon[8588]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
Jul 20 08:41:22 pcbsd-3627 gnome-keyring-daemon[8588]: couldn't set environment variable in session: The name org.gnome.SessionManager was not provided by any .service files
Jul 20 08:41:22 pcbsd-3627 pulseaudio[8710]: module.c: module-detect is deprecated: Please use module-udev-detect instead of module-detect!
Jul 20 08:41:23 pcbsd-3627 pulseaudio[8710]: oss-util.c: '/dev/dsp1' doesn't support full duplex
Jul 20 08:41:23 pcbsd-3627 pulseaudio[8710]: oss-util.c: '/dev/dsp2' doesn't support full duplex
Jul 20 08:41:23 pcbsd-3627 pulseaudio[8710]: oss-util.c: '/dev/dsp3' doesn't support full duplex
Jul 20 08:41:40 pcbsd-3627 sudo:    cabpa : TTY=unknown ; PWD=/usr/home/cabpa ; USER=root ; COMMAND=/usr/local/bin/pc-nettray wlan0
Jul 20 08:41:40 pcbsd-3627 sudo:    cabpa : TTY=unknown ; PWD=/usr/home/cabpa ; USER=root ; COMMAND=/usr/local/bin/life-preserver -tray -autostart
Jul 20 08:41:48 pcbsd-3627 sudo:    cabpa : TTY=unknown ; PWD=/usr/home/cabpa ; USER=root ; COMMAND=/usr/local/bin/pc-fbsdupdatecheck
Jul 20 08:44:52 pcbsd-3627 sudo:    cabpa : TTY=unknown ; PWD=/usr/home/cabpa ; USER=root ; COMMAND=/usr/local/bin/pc-updategui
Jul 20 08:45:03 pcbsd-3627 su: cabpa to root on /dev/pts/0

------------------pciconf-----------------------------

hostb0 at pci0:0:0:0:	class=0x060000 card=0x02601025 chip=0x2a408086 rev=0x09 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Mobile 4 Series Chipset Memory Controller Hub'
    class      = bridge
    subclass   = HOST-PCI
vgapci0 at pci0:0:2:0:	class=0x030000 card=0x02601025 chip=0x2a428086 rev=0x09 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Mobile 4 Series Chipset Integrated Graphics Controller'
    class      = display
    subclass   = VGA
vgapci1 at pci0:0:2:1:	class=0x038000 card=0x02601025 chip=0x2a438086 rev=0x09 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Mobile 4 Series Chipset Integrated Graphics Controller'
    class      = display
uhci0 at pci0:0:26:0:	class=0x0c0300 card=0x02601025 chip=0x29378086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801I (ICH9 Family) USB UHCI Controller'
    class      = serial bus
    subclass   = USB
uhci1 at pci0:0:26:1:	class=0x0c0300 card=0x02601025 chip=0x29388086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801I (ICH9 Family) USB UHCI Controller'
    class      = serial bus
    subclass   = USB
ehci0 at pci0:0:26:7:	class=0x0c0320 card=0x02601025 chip=0x293c8086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801I (ICH9 Family) USB2 EHCI Controller'
    class      = serial bus
    subclass   = USB
hdac0 at pci0:0:27:0:	class=0x040300 card=0x02601025 chip=0x293e8086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801I (ICH9 Family) HD Audio Controller'
    class      = multimedia
    subclass   = HDA
pcib1 at pci0:0:28:0:	class=0x060400 card=0x02601025 chip=0x29408086 rev=0x03 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801I (ICH9 Family) PCI Express Port 1'
    class      = bridge
    subclass   = PCI-PCI
pcib2 at pci0:0:28:1:	class=0x060400 card=0x02601025 chip=0x29428086 rev=0x03 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801I (ICH9 Family) PCI Express Port 2'
    class      = bridge
    subclass   = PCI-PCI
pcib3 at pci0:0:28:2:	class=0x060400 card=0x02601025 chip=0x29448086 rev=0x03 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801I (ICH9 Family) PCI Express Port 3'
    class      = bridge
    subclass   = PCI-PCI
pcib4 at pci0:0:28:4:	class=0x060400 card=0x02601025 chip=0x29488086 rev=0x03 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801I (ICH9 Family) PCI Express Port 5'
    class      = bridge
    subclass   = PCI-PCI
uhci2 at pci0:0:29:0:	class=0x0c0300 card=0x02601025 chip=0x29348086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801I (ICH9 Family) USB UHCI Controller'
    class      = serial bus
    subclass   = USB
uhci3 at pci0:0:29:1:	class=0x0c0300 card=0x02601025 chip=0x29358086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801I (ICH9 Family) USB UHCI Controller'
    class      = serial bus
    subclass   = USB
uhci4 at pci0:0:29:2:	class=0x0c0300 card=0x02601025 chip=0x29368086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801I (ICH9 Family) USB UHCI Controller'
    class      = serial bus
    subclass   = USB
ehci1 at pci0:0:29:7:	class=0x0c0320 card=0x02601025 chip=0x293a8086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801I (ICH9 Family) USB2 EHCI Controller'
    class      = serial bus
    subclass   = USB
pcib5 at pci0:0:30:0:	class=0x060401 card=0x02601025 chip=0x24488086 rev=0x93 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801 Mobile PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
isab0 at pci0:0:31:0:	class=0x060100 card=0x02601025 chip=0x29198086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'ICH9M LPC Interface Controller'
    class      = bridge
    subclass   = PCI-ISA
atapci0 at pci0:0:31:2:	class=0x01018f card=0x02601025 chip=0x29288086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'ICH9M/M-E 2 port SATA IDE Controller'
    class      = mass storage
    subclass   = ATA
none0 at pci0:0:31:3:	class=0x0c0500 card=0x02601025 chip=0x29308086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801I (ICH9 Family) SMBus Controller'
    class      = serial bus
    subclass   = SMBus
atapci1 at pci0:0:31:5:	class=0x010185 card=0x02601025 chip=0x292d8086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'ICH9M/M-E 2 port SATA IDE Controller'
    class      = mass storage
    subclass   = ATA
none1 at pci0:0:31:6:	class=0x118000 card=0x02601025 chip=0x29328086 rev=0x03 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801I (ICH9 Family) Thermal Subsystem'
    class      = dasp
ath0 at pci0:4:0:0:	class=0x028000 card=0x03031a32 chip=0x002a168c rev=0x01 hdr=0x00
    vendor     = 'Atheros Communications Inc.'
    device     = 'AR928X Wireless Network Adapter (PCI-Express)'
    class      = network
ale0 at pci0:5:0:0:	class=0x020000 card=0x02601025 chip=0x10261969 rev=0xb0 hdr=0x00
    vendor     = 'Atheros Communications'
    device     = 'AR8121/AR8113/AR8114 Gigabit or Fast Ethernet'
    class      = network
    subclass   = ethernet
none2 at pci0:7:0:0:	class=0x088000 card=0x02601025 chip=0x2382197b rev=0x00 hdr=0x00
    vendor     = 'JMicron Technology Corp.'
    device     = 'SD/MMC Host Controller'
    class      = base peripheral
sdhci0 at pci0:7:0:2:	class=0x080501 card=0x02601025 chip=0x2381197b rev=0x00 hdr=0x00
    vendor     = 'JMicron Technology Corp.'
    device     = 'Standard SD Host Controller'
    class      = base peripheral
    subclass   = SD host controller
none3 at pci0:7:0:3:	class=0x088000 card=0x02601025 chip=0x2383197b rev=0x00 hdr=0x00
    vendor     = 'JMicron Technology Corp.'
    device     = 'MS Host Controller'
    class      = base peripheral
none4 at pci0:7:0:4:	class=0x088000 card=0x02601025 chip=0x2384197b rev=0x00 hdr=0x00
    vendor     = 'JMicron Technology Corp.'
    device     = 'xD Host Controller'
    class      = base peripheral

------------------xorg.conf---------------------------

# Xorg.conf file generated for PC-BSD

Section "ServerLayout"
    Identifier     "XFree86 Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
    Option	   "Clone" "off"
EndSection

Section "Files"
    ModulePath      "/usr/local/lib/xorg/modules"
    FontPath     "/usr/local/lib/X11/fonts/cyrillic/"
    FontPath     "/usr/local/lib/X11/fonts/TrueType/"
    FontPath     "/usr/local/lib/X11/fonts/illinoy/"
    FontPath     "/usr/local/lib/X11/fonts/webfonts/"
    FontPath     "/usr/local/lib/X11/fonts/misc/"
    FontPath     "/usr/local/lib/X11/fonts/OTF/"
    FontPath     "/usr/local/lib/X11/fonts/TTF/"
    FontPath     "/usr/local/lib/X11/fonts/Speedo/"
    FontPath     "/usr/local/lib/X11/fonts/Type1/"
    FontPath     "/usr/local/lib/X11/fonts/CID/"
    FontPath     "/usr/local/lib/X11/fonts/75dpi/"
    FontPath     "/usr/local/lib/X11/fonts/100dpi/"
    FontPath     "/usr/local/lib/X11/fonts/dejavu/"
    FontPath     "/usr/local/lib/X11/fonts/bitstream-vera/"
    FontPath     "/usr/local/lib/X11/fonts/cyrillic/"
    FontPath     "/usr/local/lib/X11/fonts/hebrew/"
    FontPath     "/usr/local/lib/X11/fonts/vietnamese/"
    FontPath     "/usr/local/lib/X11/fonts/indic/"
    FontPath     "/usr/local/lib/X11/fonts/fonts-indic/"
    FontPath     "/usr/local/lib/X11/fonts/ae_fonts1/AAHS"
    FontPath     "/usr/local/lib/X11/fonts/ae_fonts1/AGA"
    FontPath     "/usr/local/lib/X11/fonts/ae_fonts1/FS"
    FontPath     "/usr/local/lib/X11/fonts/ae_fonts1/Kasr"
    FontPath     "/usr/local/lib/X11/fonts/ae_fonts1/MCS"
    FontPath     "/usr/local/lib/X11/fonts/ae_fonts1/Shmookh"
    FontPath     "/usr/local/lib/X11/fonts/local/"
    FontPath     "/usr/local/lib/X11/fonts/util/"
EndSection

Section "Module"
    Load           "ddc"
    Load           "dbe"
    Load           "extmod"
EndSection

Section "InputDevice"
    Identifier     "Keyboard0"
    Driver         "keyboard"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "us"
    Option         "XkbVariant" ""
EndSection

Section "InputDevice"
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/sysmouse"
    Option         "Buttons" "6"
    Option         "ZAxisMapping" "4 5"
    Option         "Emulate3Buttons"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Monitor Vendor"
    ModelName      "Monitor Model"
EndSection


Section "Device"
    Identifier      "Card0"
    Screen           0
    Driver         "vesa"
    VendorName     "Generic Vesa Driver"
    BusID      "PCI:0:2:0"
EndSection


Section "Screen"
    Identifier     "Screen0"
    Device         "Card0"
    Monitor        "Monitor0"
    DefaultDepth   24
    SubSection     "Display"
        Depth      24 
        Modes      "1120x832"
    EndSubSection
EndSection

------------------RC File-----------------------------

background_dhclient="YES" 
compat5x_enable="YES" 
sshd_enable="NO" 
devd_enable="YES" 
devfs_system_ruleset="devfsrules_common" 
ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/kde4/lib /usr/local/lib/compat/pkg"

# Disable Sendmail by default
sendmail_enable="NONE"

#Enable samba server 
samba_enable="YES" 
winbindd_enable="YES"
 
# Disable LPD  
lpd_enable="NO" 
 
# Enable CUPS 
cupsd_enable="YES" 
linux_enable="YES"
 
# FSCK Enhancements 
fsck_y_enable="YES" 
 
# powerd: adaptive speed while on AC power, adaptive while on battery power
powerd_enable="YES"
powerd_flags="-a hiadaptive -b adaptive" # set CPU frequency

# enable HAL / DBUS
dbus_enable="YES"
hald_enable="YES"

# Enables support for HPLIP
hpiod_enable="NO"
hpssd_enable="NO"

# Enable the firewall
pf_rules="/etc/pf.conf"
pf_enable="YES"
pf_flags=""

# Enable sound-support
snddetect_enable="YES"
mixer_enable="YES"

# Enable avahi_daemon
avahi_daemon_enable="YES"

# Start the swapexd daemon
swapexd_enable="YES"

# Enable IPV6 support
ipv6_activate_all_interfaces="YES"

# Enable BSDStats
bsdstats_enable="YES"

# Enable webcamd
webcamd_enable="YES"

# Disable writing syslogs to remote devices by default
syslogd_flags="-c -ss"

# Enable pbid
pbid_enable="YES"

# Enable the gdm display manager
gdm_enable="YES"

# Enable BlueTooth
hcsecd_enable="YES"
sdpd_enable="YES"

# Load the following kernel modules
kld_list="libiconv libmchain msdosfs_iconv if_bwn if_bwi bwi_v3_ucode bwn_v4_ucode runfw ng_ubt cuse4bsd sem ntfs ntfs_iconv udf udf_iconv ext2fs mmc mmcsd scd geom_uzip pefs xfs reiserfs smbfs fdescfs linsysfs"

# Clean out temporary files.
clear_tmp_enable="YES"
clean_tmp_X="YES"

# Run the pcbsd init service
pcbsdinit_enable="YES"

# Enable anacron
anacron_enable="YES"

# Enable fusefs
fusefs_enable="YES"

# Enable volmand
volmand_enable="YES"

# Enable pefs
pefs_enable="YES"

# Enable moused
moused_enable="YES"

# Enable fast-booting
fastboot_enable="YES"
fastboot_earlyrc="/usr/local/etc/rc.d/pefs /usr/local/etc/rc.d/hald /usr/local/etc/rc.d/dbus /etc/rc.d/moused /usr/local/etc/rc.d/gdm"

# Enable the Warden
warden_enable="YES"

# Enable fail2ban
fail2ban_enable="YES"

# Enable FSC
fscd_enable="YES"
# Auto-Enabled NICs from pc-sysinstall
wlans_ath0="wlan0"
ifconfig_wlan0="WPA SYNCDHCP"
ifconfig_ale0="DHCP"
# Auto-Enabled NICs from pc-sysinstall
ifconfig_ale0_ipv6="inet6 accept_rtadv"
hostname="pcbsd-3627"
zfs_enable="YES"

------------------Loader File-------------------------

# Kernel Options
kern.ipc.shmseg=1024
kern.ipc.shmmni=1024
kern.maxproc=10000

# Accept the firmware license
legal.intel_ipw.license_ack=1
legal.intel_iwi.license_ack=1

# Load additional sata device support
siis_load="YES"
sdhci_load="YES"

# Load geom support
geom_journal_load="YES"
geom_mirror_load="YES"
geom_eli_load="YES"

# Enable hardware crypto
aesni_load="YES"

# Load File-System Support
zfs_load="YES"
tmpfs_load="YES"

# Disable acpi throttle by default, fixes issues with powerd and later AMDs
hint.acpi_throttle.0.disabled="1"

# Fix crashes on 32bit with Nvidia
machdep.disable_mtrrs=1

# Show keystokes for passphrases
kern.geom.eli.visible_passphrase=2 

# Enable the graphical boot-loader
autoboot_delay="03"
graphics_enable="YES"
beastie_theme="/boot/themes/default/theme.conf"

# Load splash screen
splash_pcx_load="YES"
bitmap_load="YES"
bitmap_name="/boot/loading-screen.pcx"

# Speed up boot
kern.cam.scsi_delay="500"
vfs.root.mountfrom="zfs:tank0/ROOT/default"

------------------Free Space--------------------------

Filesystem                1M-blocks Used  Avail Capacity  Mounted on
tank0/ROOT/default           113041 3032 110008     3%    /
devfs                             0    0      0   100%    /dev
procfs                            0    0      0   100%    /proc
linprocfs                         0    0      0   100%    /compat/linux/proc
tank0/root                   110009    1 110008     0%    /root
tank0/tmp                    110008    0 110008     0%    /tmp
tank0/usr/home               110043   34 110008     0%    /usr/home
tank0/usr/jails              110008    0 110008     0%    /usr/jails
tank0/usr/obj                110008    0 110008     0%    /usr/obj
tank0/usr/pbi                110737  729 110008     1%    /usr/pbi
tank0/usr/ports              110008    0 110008     0%    /usr/ports
tank0/usr/ports/distfiles    110008    0 110008     0%    /usr/ports/distfiles
tank0/usr/src                110008    0 110008     0%    /usr/src
tank0/var/audit              110008    0 110008     0%    /var/audit
tank0/var/log                110009    0 110008     0%    /var/log
tank0/var/tmp                110008    0 110008     0%    /var/tmp
/dev/ada0s1                  118696 6926 105737     6%    /media/ada0s1

------------------System Processes--------------------

last pid: 11296;  load averages:  1.06,  0.84,  0.48  up 0+00:07:01    08:45:30
110 processes: 3 running, 106 sleeping, 1 zombie

Mem: 302M Active, 150M Inact, 321M Wired, 1220K Cache, 512K Buf, 1146M Free
Swap: 2048M Total, 2048M Free


  PID USERNAME    THR PRI NICE   SIZE    RES STATE   C   TIME   WCPU COMMAND
10276 root          2  52    0 47060K 19040K select  0   0:37 100.00% pc-updategui
 8521 root          1  21    0   126M 50072K select  1   0:12  1.95% Xorg
10645 root          2  52    0 90888K 23576K select  0   0:01  1.56% pc-sysmanager
 9206 cabpa         1  20    0   107M 16328K select  0   0:04  0.78% xchat
 8675 cabpa         1  20    0   104M 15908K select  0   0:02  0.29% lxpanel
 9233 cabpa        18  20    0   395M   209M uwait   1   0:20  0.00% seamonkey-bin
 8678 cabpa         3  20    0   130M 25616K uwait   0   0:02  0.00% pcmanfm
 9713 cabpa         3  34    0 79780K 25612K kqread  1   0:01  0.00% pc-controlpanel
10345 cabpa         2  34    0   118M 24352K select  1   0:01  0.00% gksu
  237 root          1  20    0  9608K  1056K select  1   0:01  0.00% moused
 8716 cabpa         1  20    0   111M 23012K select  1   0:00  0.00% python2.7
 8672 cabpa         1  20    0 22460K  9760K select  1   0:00  0.00% openbox
 8819 root          1  20    0 41868K 17532K select  0   0:00  0.00% life-preserver
  283 haldaemon     2  20    0 27304K  4944K piperd  0   0:00  0.00% hald
 8691 cabpa         1  20    0 36868K 19552K select  1   0:00  0.00% python
 2864 root          1  20    0  9504K  1136K select  1   0:00  0.00% powerd
 8626 cabpa         5  52    0 58640K 17064K select  1   0:00  0.00% pc-systemupdatertra
  234 messagebus    1  20    0  9696K  2228K select  0   0:00  0.00% dbus-daemon






More information about the Testing mailing list