[PC-BSD Testing] Support for Dell ST2220T Touchscreen

N V VaNs9 at yandex.ru
Tue Feb 14 12:28:56 PST 2012


Hi.

Ok. So, as I've said, I've possibly confused you talking about hal. It seems, imho, you're one step close to get touchscreen working. Seems, moused should be stopped for the touchscreen or proper driver shoud be used. Ok, I'll settle steps to try. Meanwhile, if there is anybody here having an advice for getting hal info / configuring hal, please write. :)

Regards,
Vans.

14.02.2012, 14:29, "Daniel Byrnes" <mrdbyrnes at optusnet.com.au>:
> Hi,
>
> Under system settings -> input devices  (from PCBSD control panel)
>
> There are 3 entries
> Keyboard
> Mouse
> Remote Controls
>
> The GUI doesn't indicate which dev these icons are pointing to. I would expect to see 2 by usb mouse present.
>
> There is not an entry for a tablet or a second mouse. I believe that the tablet support is done through the usb mouse driver part of X from an obscure post I saw from Kris Moore in the middle of last year.
>
> A note from Dru for 9.0-rc2 said a tablet display should be detected during installation and this would be supported in the isotope release. During installation this tablet (Dell ST2220T) is not found.
>
> I have tried rebooting the PC without a USB mouse connected and the touch screen still doesn't work. I have tried a reinstall without a mouse connected and it still doesn't work.
>
> This tablet display is usb (see usbconfig below) and the system can see it as a usb device. The install process cannot make the link to this device as a "pointer" in X. Can anyone give me some hints on a configuration file I may be able to edit to get X looking at the device as a pointer.
>
> Cheers
> Dan
>
>>  N V <VaNs9 at yandex.ru> wrote:
>>
>>  Hi.
>>
>>  Please, look at System Settings -> Input Devices
>>
>>  Regards,
>>  Vans.
>>
>>  12.02.2012, 14:32, "Dan Byrnes" <mrdbyrnes at optusnet.com.au>:
>>>  šHi,
>>>
>>>  šRunning KDE.
>>>
>>>  šCheers
>>>  šDan
>>>>  ššHi,
>>>>
>>>>  ššwell, I've confused you possibly.
>>>>  ššDE: KDE, Gnome, etc... What do u use?
>>>>
>>>>  ššRegards,
>>>>  ššVans.
>>>>
>>>>  šš08.02.2012, 12:56, "Dan Byrnes"<mrdbyrnes at optusnet.com.au>:
>>>>>  ššHi,
>>>>>
>>>>>  ššWhich file do you want me report the "input devices" from? Sorry
>>  I'm not
>>>>>  ššclear what my DE is? I'm guessing device entry. I posted all of
>>  the
>>>>>  ššXorg.conf file before. Is there a "input devices" section in one
>>  of the
>>>>>  ššHAL configuration files? I haven't looked at configuring HAL
>>  before.
>>>>>  ššOr am I looking for something in the rc.conf?
>>>>>
>>>>>  ššCheers
>>>>>  ššDan
>>>>>>  ššššBtw.
>>>>>>
>>>>>>  ššššSeems that touch screen is detected by X.
>>>>>>  šššš..
>>>>>>  ššššSection "InputDevice"
>>>>>>  ššššIdentifier "Panel0"
>>>>>>  ššššDriver "mouse"
>>>>>>  ššššOption "Protocol" "usb"
>>>>>>  ššššOption "Device" "/dev/uhid0"
>>>>>>  ššššEndSection
>>>>>>  šššš..
>>>>>>
>>>>>>  ššššNevertheless, HAL is used and that entry is ignored.
>>>>>>  ššššWhat's in the "input devices" in your DE?
>>>>>>
>>>>>>  ššššRegards,
>>>>>>  ššššVans.
>>>>>>
>>>>>>  ššššP.S. There are two entries for the "/dev/uhid0". Seems, that
>>  multitouch is detected in that way. But it doesn't matter now, imo.
>>>>>>  šššš06.02.2012, 05:45, "Daniel Byrnes"<mrdbyrnes at optusnet.com.au>:
>>>>>>>  ššššHi,
>>>>>>>
>>>>>>>  ššššI have just installed isotope 9.0 with a Dell ST2220T USB
>>  touchscreen connected. During install the touchscreen is not identified.
>>>>>>>  ššššDoes anyone have any suggestion on how I can get this
>>  touchscreen working. The output from usbconfig and xorg.conf is below.
>>>>>>>  ššššCheers
>>>>>>>  ššššDan
>>>>>>>
>>>>>>>  šššš[root at Stoat] ~# usbconfig
>>>>>>>  ššššugen0.1:<OHCI root HUB ATI> šššat usbus0, cfg=0 md=HOST
>>  spd=FULL (12Mbps) pwr=SAVE
>>>>>>>  ššššugen1.1:<OHCI root HUB ATI> šššat usbus1, cfg=0 md=HOST
>>  spd=FULL (12Mbps) pwr=SAVE
>>>>>>>  ššššugen2.1:<OHCI root HUB ATI> šššat usbus2, cfg=0 md=HOST
>>  spd=FULL (12Mbps) pwr=SAVE
>>>>>>>  ššššugen3.1:<OHCI root HUB ATI> šššat usbus3, cfg=0 md=HOST
>>  spd=FULL (12Mbps) pwr=SAVE
>>>>>>>  ššššugen4.1:<OHCI root HUB ATI> šššat usbus4, cfg=0 md=HOST
>>  spd=FULL (12Mbps) pwr=SAVE
>>>>>>>  ššššugen5.1:<EHCI root HUB ATI> šššat usbus5, cfg=0 md=HOST
>>  spd=HIGH (480Mbps) pwr=SAVE
>>>>>>>  ššššugen2.2:<Microsoft Basic Optical Mouse v2.0 Microsoft> šššat
>>  usbus2, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON
>>>>>>>  ššššugen5.4:<USB 2.0 Reader Generic> šššat usbus5, cfg=0 md=HOST
>>  spd=HIGH (480Mbps) pwr=ON
>>>>>>>  ššššugen5.2:<product 0x2514 vendor 0x0424> šššat usbus5, cfg=0
>>  md=HOST spd=HIGH (480Mbps) pwr=SAVE
>>>>>>>  ššššugen5.3:<LGD-MultiTouch LG Display> šššat usbus5, cfg=0
>>  md=HOST spd=FULL (12Mbps) pwr=ON
>>>>>>>  ššššThe xorg.conf is
>>>>>>>  šššš# Xorg.conf file generated for PC-BSD
>>>>>>>
>>>>>>>  ššššSection "ServerLayout"
>>>>>>>  ššššIdentifier "XFree86 Configured"
>>>>>>>  ššššScreen 0 "Screen0" 0 0
>>>>>>>  ššššInputDevice "Mouse0" "CorePointer"
>>>>>>>  ššššInputDevice "Panel0"
>>>>>>>  ššššInputDevice "Panel1"
>>>>>>>  ššššInputDevice "Keyboard0" "CoreKeyboard"
>>>>>>>  ššššOption "Clone" "off"
>>>>>>>  ššššEndSection
>>>>>>>
>>>>>>>  ššššSection "ServerFlags"
>>>>>>>  ššššOption "AutoAddDevices" "Off"
>>>>>>>  ššššEndSection
>>>>>>>
>>>>>>>  ššššSection "Files"
>>>>>>>  ššššModulePath "/usr/local/lib/xorg/modules"
>>>>>>>  ššššFontPath "/usr/local/lib/X11/fonts/cyrillic/"
>>>>>>>  ššššFontPath "/usr/local/lib/X11/fonts/TrueType/"
>>>>>>>  ššššFontPath "/usr/local/lib/X11/fonts/illinoy/"
>>>>>>>  ššššFontPath "/usr/local/lib/X11/fonts/webfonts/"
>>>>>>>  ššššFontPath "/usr/local/lib/X11/fonts/misc/"
>>>>>>>  ššššFontPath "/usr/local/lib/X11/fonts/OTF/"
>>>>>>>  ššššFontPath "/usr/local/lib/X11/fonts/TTF/"
>>>>>>>  ššššFontPath "/usr/local/lib/X11/fonts/Speedo/"
>>>>>>>  ššššFontPath "/usr/local/lib/X11/fonts/Type1/"
>>>>>>>  ššššFontPath "/usr/local/lib/X11/fonts/CID/"
>>>>>>>  ššššFontPath "/usr/local/lib/X11/fonts/75dpi/"
>>>>>>>  ššššFontPath "/usr/local/lib/X11/fonts/100dpi/"
>>>>>>>  ššššFontPath "/usr/local/lib/X11/fonts/dejavu/"
>>>>>>>  ššššFontPath "/usr/local/lib/X11/fonts/bitstream-vera/"
>>>>>>>  ššššFontPath "/usr/local/lib/X11/fonts/cyrillic/"
>>>>>>>  ššššFontPath "/usr/local/lib/X11/fonts/hebrew/"
>>>>>>>  ššššFontPath "/usr/local/lib/X11/fonts/vietnamese/"
>>>>>>>  ššššFontPath "/usr/local/lib/X11/fonts/indic/"
>>>>>>>  ššššFontPath "/usr/local/lib/X11/fonts/fonts-indic/"
>>>>>>>  ššššFontPath "/usr/local/lib/X11/fonts/ae_fonts1/AAHS"
>>>>>>>  ššššFontPath "/usr/local/lib/X11/fonts/ae_fonts1/AGA"
>>>>>>>  ššššFontPath "/usr/local/lib/X11/fonts/ae_fonts1/FS"
>>>>>>>  ššššFontPath "/usr/local/lib/X11/fonts/ae_fonts1/Kasr"
>>>>>>>  ššššFontPath "/usr/local/lib/X11/fonts/ae_fonts1/MCS"
>>>>>>>  ššššFontPath "/usr/local/lib/X11/fonts/ae_fonts1/Shmookh"
>>>>>>>  ššššFontPath "/usr/local/lib/X11/fonts/local/"
>>>>>>>  ššššFontPath "/usr/local/lib/X11/fonts/util/"
>>>>>>>  ššššEndSection
>>>>>>>
>>>>>>>  ššššSection "Module"
>>>>>>>  ššššLoad "ddc"
>>>>>>>  ššššLoad "dbe"
>>>>>>>  šššš# Load "dri"
>>>>>>>  ššššLoad "extmod"
>>>>>>>  šššš# Load "glx"
>>>>>>>  ššššEndSection
>>>>>>>
>>>>>>>  ššššSection "InputDevice"
>>>>>>>  ššššIdentifier "Keyboard0"
>>>>>>>  ššššDriver "keyboard"
>>>>>>>  ššššOption "XkbModel" "pc105"
>>>>>>>  ššššOption "XkbLayout" "us"
>>>>>>>  ššššOption "XkbVariant" ""
>>>>>>>  ššššEndSection
>>>>>>>
>>>>>>>  ššššSection "InputDevice"
>>>>>>>  ššššIdentifier "Mouse0"
>>>>>>>  ššššDriver "mouse"
>>>>>>>  ššššOption "Protocol" "auto"
>>>>>>>  ššššOption "Device" "/dev/sysmouse"
>>>>>>>  ššššOption "Buttons" "6"
>>>>>>>  ššššOption "ZAxisMapping" "4 5"
>>>>>>>  ššššOption "Emulate3Buttons"
>>>>>>>  ššššEndSection
>>>>>>>
>>>>>>>  ššššSection "Monitor"
>>>>>>>  ššššIdentifier "Monitor0"
>>>>>>>  ššššVendorName "Monitor Vendor"
>>>>>>>  ššššModelName "Monitor Model"
>>>>>>>  ššššEndSection
>>>>>>>
>>>>>>>  ššššSection "Device"
>>>>>>>  ššššIdentifier "Card0"
>>>>>>>  ššššScreen 0
>>>>>>>  ššššDriver "ati"
>>>>>>>  ššššVendorName "ATI Video Driver"
>>>>>>>  ššššOption "CPPIOMode" "yes"
>>>>>>>  ššššOption "DynamicPM" "on"
>>>>>>>  ššššBusID "PCI:1:5:0"
>>>>>>>  ššššEndSection
>>>>>>>
>>>>>>>  ššššSection "Screen"
>>>>>>>  ššššIdentifier "Screen0"
>>>>>>>  ššššDevice "Card0"
>>>>>>>  ššššMonitor "Monitor0"
>>>>>>>  ššššDefaultDepth 24
>>>>>>>  ššššSubSection "Display"
>>>>>>>  ššššDepth 24
>>>>>>>  ššššModes "1920x1080"
>>>>>>>  ššššEndSubSection
>>>>>>>  ššššEndSection
>>>>>>>
>>>>>>>  ššššSection "InputDevice"
>>>>>>>  ššššIdentifier "Panel0"
>>>>>>>  ššššDriver "mouse"
>>>>>>>  ššššOption "Protocol" "usb"
>>>>>>>  ššššOption "Device" "/dev/uhid0"
>>>>>>>  ššššEndSection
>>>>>>>
>>>>>>>  ššššSection "InputDevice"
>>>>>>>  ššššIdentifier "Panel1"
>>>>>>>  ššššDriver "mouse"
>>>>>>>  ššššOption "Protocol" "usb"
>>>>>>>  ššššOption "Device" "/dev/uhid0"
>>>>>>>  ššššEndSection
>>>>>>>
>>>>>>>  ššššCheers
>>>>>>>  ššššDan Byrnes
>>>>>>>  šššš_______________________________________________
>>>>>>>  ššššTesting mailing list
>>>>>>>  ššššTesting at lists.pcbsd.org
>>>>>>>  ššššhttp://lists.pcbsd.org/mailman/listinfo/testing
>>>>>>  šššš_______________________________________________
>>>>>>  ššššTesting mailing list
>>>>>>  ššššTesting at lists.pcbsd.org
>>>>>>  ššššhttp://lists.pcbsd.org/mailman/listinfo/testing
>>>>>  šš_______________________________________________
>>>>>  ššTesting mailing list
>>>>>  ššTesting at lists.pcbsd.org
>>>>>  ššhttp://lists.pcbsd.org/mailman/listinfo/testing
>>>>  šš_______________________________________________
>>>>  ššTesting mailing list
>>>>  ššTesting at lists.pcbsd.org
>>>>  ššhttp://lists.pcbsd.org/mailman/listinfo/testing
>>>  š_______________________________________________
>>>  šTesting mailing list
>>>  šTesting at lists.pcbsd.org
>>>  šhttp://lists.pcbsd.org/mailman/listinfo/testing
>>  _______________________________________________
>>  Testing mailing list
>>  Testing at lists.pcbsd.org
>>  http://lists.pcbsd.org/mailman/listinfo/testing
>
> Daniel Byrnes
>
> _______________________________________________
> Testing mailing list
> Testing at lists.pcbsd.org
> http://lists.pcbsd.org/mailman/listinfo/testing


More information about the Testing mailing list