[PC-BSD Testing] Support for Dell ST2220T Touchscreen
N V
VaNs9 at yandex.ru
Wed Feb 8 05:42:16 PST 2012
Hi,
well, I've confused you possibly.
DE: KDE, Gnome, etc... What do u use?
Regards,
Vans.
08.02.2012, 12:56, "Dan Byrnes" <mrdbyrnes at optusnet.com.au>:
> Hi,
>
> Which file do you want me report the "input devices" from? Sorry I'm not
> clear what my DE is? I'm guessing device entry. I posted all of the
> Xorg.conf file before. Is there a "input devices" section in one of the
> HAL configuration files? I haven't looked at configuring HAL before.
>
> Or am I looking for something in the rc.conf?
>
> Cheers
> Dan
>
>> Btw.
>>
>> Seems that touch screen is detected by X.
>> ..
>> Section "InputDevice"
>> Identifier "Panel0"
>> Driver "mouse"
>> Option "Protocol" "usb"
>> Option "Device" "/dev/uhid0"
>> EndSection
>> ..
>>
>> Nevertheless, HAL is used and that entry is ignored.
>> What's in the "input devices" in your DE?
>>
>> Regards,
>> Vans.
>>
>> P.S. There are two entries for the "/dev/uhid0". Seems, that multitouch is detected in that way. But it doesn't matter now, imo.
>>
>> 06.02.2012, 05:45, "Daniel Byrnes"<mrdbyrnes at optusnet.com.au>:
>>> Hi,
>>>
>>> I have just installed isotope 9.0 with a Dell ST2220T USB touchscreen connected. During install the touchscreen is not identified.
>>>
>>> Does anyone have any suggestion on how I can get this touchscreen working. The output from usbconfig and xorg.conf is below.
>>>
>>> Cheers
>>> Dan
>>>
>>> [root at Stoat] ~# usbconfig
>>> ugen0.1:<OHCI root HUB ATI> at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
>>> ugen1.1:<OHCI root HUB ATI> at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
>>> ugen2.1:<OHCI root HUB ATI> at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
>>> ugen3.1:<OHCI root HUB ATI> at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
>>> ugen4.1:<OHCI root HUB ATI> at usbus4, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
>>> ugen5.1:<EHCI root HUB ATI> at usbus5, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE
>>> ugen2.2:<Microsoft Basic Optical Mouse v2.0 Microsoft> at usbus2, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON
>>> ugen5.4:<USB 2.0 Reader Generic> at usbus5, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON
>>> ugen5.2:<product 0x2514 vendor 0x0424> at usbus5, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE
>>> ugen5.3:<LGD-MultiTouch LG Display> at usbus5, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
>>>
>>> The xorg.conf is
>>> # Xorg.conf file generated for PC-BSD
>>>
>>> Section "ServerLayout"
>>> Identifier "XFree86 Configured"
>>> Screen 0 "Screen0" 0 0
>>> InputDevice "Mouse0" "CorePointer"
>>> InputDevice "Panel0"
>>> InputDevice "Panel1"
>>> InputDevice "Keyboard0" "CoreKeyboard"
>>> Option "Clone" "off"
>>> EndSection
>>>
>>> Section "ServerFlags"
>>> Option "AutoAddDevices" "Off"
>>> EndSection
>>>
>>> Section "Files"
>>> ModulePath "/usr/local/lib/xorg/modules"
>>> FontPath "/usr/local/lib/X11/fonts/cyrillic/"
>>> FontPath "/usr/local/lib/X11/fonts/TrueType/"
>>> FontPath "/usr/local/lib/X11/fonts/illinoy/"
>>> FontPath "/usr/local/lib/X11/fonts/webfonts/"
>>> FontPath "/usr/local/lib/X11/fonts/misc/"
>>> FontPath "/usr/local/lib/X11/fonts/OTF/"
>>> FontPath "/usr/local/lib/X11/fonts/TTF/"
>>> FontPath "/usr/local/lib/X11/fonts/Speedo/"
>>> FontPath "/usr/local/lib/X11/fonts/Type1/"
>>> FontPath "/usr/local/lib/X11/fonts/CID/"
>>> FontPath "/usr/local/lib/X11/fonts/75dpi/"
>>> FontPath "/usr/local/lib/X11/fonts/100dpi/"
>>> FontPath "/usr/local/lib/X11/fonts/dejavu/"
>>> FontPath "/usr/local/lib/X11/fonts/bitstream-vera/"
>>> FontPath "/usr/local/lib/X11/fonts/cyrillic/"
>>> FontPath "/usr/local/lib/X11/fonts/hebrew/"
>>> FontPath "/usr/local/lib/X11/fonts/vietnamese/"
>>> FontPath "/usr/local/lib/X11/fonts/indic/"
>>> FontPath "/usr/local/lib/X11/fonts/fonts-indic/"
>>> FontPath "/usr/local/lib/X11/fonts/ae_fonts1/AAHS"
>>> FontPath "/usr/local/lib/X11/fonts/ae_fonts1/AGA"
>>> FontPath "/usr/local/lib/X11/fonts/ae_fonts1/FS"
>>> FontPath "/usr/local/lib/X11/fonts/ae_fonts1/Kasr"
>>> FontPath "/usr/local/lib/X11/fonts/ae_fonts1/MCS"
>>> FontPath "/usr/local/lib/X11/fonts/ae_fonts1/Shmookh"
>>> FontPath "/usr/local/lib/X11/fonts/local/"
>>> FontPath "/usr/local/lib/X11/fonts/util/"
>>> EndSection
>>>
>>> Section "Module"
>>> Load "ddc"
>>> Load "dbe"
>>> # Load "dri"
>>> Load "extmod"
>>> # Load "glx"
>>> EndSection
>>>
>>> Section "InputDevice"
>>> Identifier "Keyboard0"
>>> Driver "keyboard"
>>> Option "XkbModel" "pc105"
>>> Option "XkbLayout" "us"
>>> Option "XkbVariant" ""
>>> EndSection
>>>
>>> Section "InputDevice"
>>> Identifier "Mouse0"
>>> Driver "mouse"
>>> Option "Protocol" "auto"
>>> Option "Device" "/dev/sysmouse"
>>> Option "Buttons" "6"
>>> Option "ZAxisMapping" "4 5"
>>> Option "Emulate3Buttons"
>>> EndSection
>>>
>>> Section "Monitor"
>>> Identifier "Monitor0"
>>> VendorName "Monitor Vendor"
>>> ModelName "Monitor Model"
>>> EndSection
>>>
>>> Section "Device"
>>> Identifier "Card0"
>>> Screen 0
>>> Driver "ati"
>>> VendorName "ATI Video Driver"
>>> Option "CPPIOMode" "yes"
>>> Option "DynamicPM" "on"
>>> BusID "PCI:1:5:0"
>>> EndSection
>>>
>>> Section "Screen"
>>> Identifier "Screen0"
>>> Device "Card0"
>>> Monitor "Monitor0"
>>> DefaultDepth 24
>>> SubSection "Display"
>>> Depth 24
>>> Modes "1920x1080"
>>> EndSubSection
>>> EndSection
>>>
>>> Section "InputDevice"
>>> Identifier "Panel0"
>>> Driver "mouse"
>>> Option "Protocol" "usb"
>>> Option "Device" "/dev/uhid0"
>>> EndSection
>>>
>>> Section "InputDevice"
>>> Identifier "Panel1"
>>> Driver "mouse"
>>> Option "Protocol" "usb"
>>> Option "Device" "/dev/uhid0"
>>> EndSection
>>>
>>> Cheers
>>> Dan Byrnes
>>> _______________________________________________
>>> Testing mailing list
>>> Testing at lists.pcbsd.org
>>> http://lists.pcbsd.org/mailman/listinfo/testing
>> _______________________________________________
>> Testing mailing list
>> Testing at lists.pcbsd.org
>> http://lists.pcbsd.org/mailman/listinfo/testing
>
> _______________________________________________
> Testing mailing list
> Testing at lists.pcbsd.org
> http://lists.pcbsd.org/mailman/listinfo/testing
More information about the Testing
mailing list