[PC-BSD Testing] Support for Dell ST2220T Touchscreen

Dan Byrnes mrdbyrnes at optusnet.com.au
Wed Feb 8 00:56:00 PST 2012


Hi,

Which file do you want me report the "input devices" from? Sorry I'm not 
clear what my DE is? I'm guessing device entry. I posted all of the 
Xorg.conf file before. Is there a "input devices" section in one of the 
HAL configuration files? I haven't looked at configuring HAL before.

Or am I looking for something in the rc.conf?

Cheers
Dan

> Btw.
>
> Seems that touch screen is detected by X.
> ..
> Section "InputDevice"
> Identifier "Panel0"
> Driver "mouse"
> Option "Protocol" "usb"
> Option "Device" "/dev/uhid0"
> EndSection
> ..
>
> Nevertheless, HAL is used and that entry is ignored.
> What's in the "input devices" in your DE?
>
> Regards,
> Vans.
>
> P.S. There are two entries for the "/dev/uhid0". Seems, that multitouch is detected in that way. But it doesn't matter now, imo.
>
> 06.02.2012, 05:45, "Daniel Byrnes"<mrdbyrnes at optusnet.com.au>:
>> Hi,
>>
>> I have just installed isotope 9.0 with a Dell ST2220T USB touchscreen connected. During install the touchscreen is not identified.
>>
>> Does anyone have any suggestion on how I can get this touchscreen working. The output from usbconfig and xorg.conf is below.
>>
>> Cheers
>> Dan
>>
>> [root at Stoat] ~# usbconfig
>> ugen0.1:<OHCI root HUB ATI>  at usbus0, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
>> ugen1.1:<OHCI root HUB ATI>  at usbus1, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
>> ugen2.1:<OHCI root HUB ATI>  at usbus2, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
>> ugen3.1:<OHCI root HUB ATI>  at usbus3, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
>> ugen4.1:<OHCI root HUB ATI>  at usbus4, cfg=0 md=HOST spd=FULL (12Mbps) pwr=SAVE
>> ugen5.1:<EHCI root HUB ATI>  at usbus5, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE
>> ugen2.2:<Microsoft Basic Optical Mouse v2.0 Microsoft>  at usbus2, cfg=0 md=HOST spd=LOW (1.5Mbps) pwr=ON
>> ugen5.4:<USB 2.0 Reader Generic>  at usbus5, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=ON
>> ugen5.2:<product 0x2514 vendor 0x0424>  at usbus5, cfg=0 md=HOST spd=HIGH (480Mbps) pwr=SAVE
>> ugen5.3:<LGD-MultiTouch LG Display>  at usbus5, cfg=0 md=HOST spd=FULL (12Mbps) pwr=ON
>>
>> The xorg.conf is
>> # Xorg.conf file generated for PC-BSD
>>
>> Section "ServerLayout"
>> Identifier "XFree86 Configured"
>> Screen 0 "Screen0" 0 0
>> InputDevice "Mouse0" "CorePointer"
>> InputDevice "Panel0"
>> InputDevice "Panel1"
>> InputDevice "Keyboard0" "CoreKeyboard"
>> Option "Clone" "off"
>> EndSection
>>
>> Section "ServerFlags"
>> Option "AutoAddDevices" "Off"
>> EndSection
>>
>> Section "Files"
>> ModulePath "/usr/local/lib/xorg/modules"
>> FontPath "/usr/local/lib/X11/fonts/cyrillic/"
>> FontPath "/usr/local/lib/X11/fonts/TrueType/"
>> FontPath "/usr/local/lib/X11/fonts/illinoy/"
>> FontPath "/usr/local/lib/X11/fonts/webfonts/"
>> FontPath "/usr/local/lib/X11/fonts/misc/"
>> FontPath "/usr/local/lib/X11/fonts/OTF/"
>> FontPath "/usr/local/lib/X11/fonts/TTF/"
>> FontPath "/usr/local/lib/X11/fonts/Speedo/"
>> FontPath "/usr/local/lib/X11/fonts/Type1/"
>> FontPath "/usr/local/lib/X11/fonts/CID/"
>> FontPath "/usr/local/lib/X11/fonts/75dpi/"
>> FontPath "/usr/local/lib/X11/fonts/100dpi/"
>> FontPath "/usr/local/lib/X11/fonts/dejavu/"
>> FontPath "/usr/local/lib/X11/fonts/bitstream-vera/"
>> FontPath "/usr/local/lib/X11/fonts/cyrillic/"
>> FontPath "/usr/local/lib/X11/fonts/hebrew/"
>> FontPath "/usr/local/lib/X11/fonts/vietnamese/"
>> FontPath "/usr/local/lib/X11/fonts/indic/"
>> FontPath "/usr/local/lib/X11/fonts/fonts-indic/"
>> FontPath "/usr/local/lib/X11/fonts/ae_fonts1/AAHS"
>> FontPath "/usr/local/lib/X11/fonts/ae_fonts1/AGA"
>> FontPath "/usr/local/lib/X11/fonts/ae_fonts1/FS"
>> FontPath "/usr/local/lib/X11/fonts/ae_fonts1/Kasr"
>> FontPath "/usr/local/lib/X11/fonts/ae_fonts1/MCS"
>> FontPath "/usr/local/lib/X11/fonts/ae_fonts1/Shmookh"
>> FontPath "/usr/local/lib/X11/fonts/local/"
>> FontPath "/usr/local/lib/X11/fonts/util/"
>> EndSection
>>
>> Section "Module"
>> Load "ddc"
>> Load "dbe"
>> # Load "dri"
>> Load "extmod"
>> # Load "glx"
>> EndSection
>>
>> Section "InputDevice"
>> Identifier "Keyboard0"
>> Driver "keyboard"
>> Option "XkbModel" "pc105"
>> Option "XkbLayout" "us"
>> Option "XkbVariant" ""
>> EndSection
>>
>> Section "InputDevice"
>> Identifier "Mouse0"
>> Driver "mouse"
>> Option "Protocol" "auto"
>> Option "Device" "/dev/sysmouse"
>> Option "Buttons" "6"
>> Option "ZAxisMapping" "4 5"
>> Option "Emulate3Buttons"
>> EndSection
>>
>> Section "Monitor"
>> Identifier "Monitor0"
>> VendorName "Monitor Vendor"
>> ModelName "Monitor Model"
>> EndSection
>>
>> Section "Device"
>> Identifier "Card0"
>> Screen 0
>> Driver "ati"
>> VendorName "ATI Video Driver"
>> Option "CPPIOMode" "yes"
>> Option "DynamicPM" "on"
>> BusID "PCI:1:5:0"
>> EndSection
>>
>> Section "Screen"
>> Identifier "Screen0"
>> Device "Card0"
>> Monitor "Monitor0"
>> DefaultDepth 24
>> SubSection "Display"
>> Depth 24
>> Modes "1920x1080"
>> EndSubSection
>> EndSection
>>
>> Section "InputDevice"
>> Identifier "Panel0"
>> Driver "mouse"
>> Option "Protocol" "usb"
>> Option "Device" "/dev/uhid0"
>> EndSection
>>
>> Section "InputDevice"
>> Identifier "Panel1"
>> Driver "mouse"
>> Option "Protocol" "usb"
>> Option "Device" "/dev/uhid0"
>> EndSection
>>
>> Cheers
>> Dan Byrnes
>> _______________________________________________
>> Testing mailing list
>> Testing at lists.pcbsd.org
>> http://lists.pcbsd.org/mailman/listinfo/testing
> _______________________________________________
> Testing mailing list
> Testing at lists.pcbsd.org
> http://lists.pcbsd.org/mailman/listinfo/testing
>



More information about the Testing mailing list