[PC-BSD Testing] Feedback On Network Manager For 3G Mobile

webugz webugz at gmail.com
Wed Apr 4 20:46:15 PDT 2012


Hi,
On 3G mobile, leave the current tab for advance users. It would be great to
have the option to select predefined 3G operators from a drop-down list.
Average users would have no idea about AT commands and the whole lot of
other settings. Provide a link for users to post working profile to build
up the database. Perhaps also a provide a default generic profile. Appended
below is my working ppp.conf using the 3G service of Singtel, Singapore.
Thank you for doing a great job.

ppp.conf:-
default:
allow users *
set log Phase Chat Connect
singtel:
set device /dev/cuaU0.0
set timeout 0
set authname
set authkey
set dial “ABORT BUSY ABORT NO\\sCARRIER TIMEOUT 5 \
\”\” \
AT OK-AT-OK \
AT+CFUN=1 OK-AT-OK \
AT+CMEE=2 OK-AT-OK \
AT+CSQ OK \
AT+CGDCONT=1,\\\“IP\\\”,\\\“internet\\\” OK \
AT+CGACT? OK-AT-OK \
AT+CGATT? OK \
AT+CGCLASS? OK \
AT+COPS? OK \
\\dATD*99# TIMEOUT 40 CONNECT“
set crtscts on
disable vjcomp
disable acfcomp
disable deflate
disable deflate24
disable pred1
disable protocomp
disable mppe
disable ipv6cp
disable lqr
disable echo
nat enable yes
enable dns
resolv writable
set ifaddr 10.1.0.2/0 10.1.0.1/0 255.255.255.255 0.0.0.0
add default HISADDR
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.pcbsd.org/pipermail/testing/attachments/20120405/3c897c03/attachment-0001.html>


More information about the Testing mailing list