[PC-BSD Testing] 8.2-RELEASE-x64 - Hangs in Firefox, Opera, and Kaffeine

Ian Robinson fitchkendall at gmail.com
Fri Feb 25 23:12:52 PST 2011


This is a brief report about PCBSD 8.2-RELEASE-x64 and operating system
hangs.  This was a fresh install on an HP xw9400 w/ two AMD dual core
Opterons, 8 Gb RAM, and nVidia GeForce GT 240 w/ 1024 MB using the
260.19.29 driver.  Video Resolution is 1800 x 1440, the manufacturer's
"preferred" resolution for the Nokia 445Xpro.   I installed everything
except The Warden.  There were no problems with installation.  Previous
experiences with 8.2-Beta, -RC1, -RC2, and -RC3 revealed no major problems.

After a plain vanilla fresh install, I installed Opera and Virtual Box via
the PBI method.  I also copied my pre-existing profiles for Opera and
Firefox.  I installed Kaffeine 1.1 from ports.

My system has locked up approx. six times today.  Once the system freezes, I
cannot use the mouse, use the keyboard, or switch to console.

The first lockup experience was using Firefox.  Firefox is basically
"standard" except for add-ons NoScript and DownloadHelper.  I had four tabs
open and started a YouTube video.  For a brief moment, as I moved the mouse
pointer, it hesitated, then moved slow and jerky across the screen but
disappeared.   I tried to switch to a console without success.  I had
successfully played many Youtube videos the day before.   I left the system
alone for a half hour, but no change occurred.  I powered off and restarted.


The second experience involved kaffeine.  I was working fine.  However, I
selected four short videos to play in sequence, and kaffeine froze the
system within seconds.  I had no mouse pointer, and I could not go to a
console.

The third experience involved Opera.  Things were working fine until I
attempted to save an image with the right-click/save as sequence.  Opera
flashed a message saying its skin was inappropriate for this version.   I
could move the mouse around, but could do nothing on the screen with it such
as close out the error message, click on the kicker menu, etc,  However, I
could jump to a console where I terminated the Opera process.  However, one
of the banner images from the web page in Opera persisted on the desktop and
in other programs that I opened.  I rebooted which cleared the persistent
image.  However, the Opera problem was repeatable and a residual image from
a web page banner also repeated.

I'm suspecting that perhaps I have either an XOrg problem or a perhaps a
problem related to the profiles I had carried over from the previous
instances of 8.2-Beta, RC-1, RC-2, and RC-3, although I was also using
Firefox (3.6.13) and Opera (11.1) on those too.  I have had no problems with
VirtualBox.

=========================================

-----------------Dmesg Output-------------------------

Copyright (c) 1992-2011 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.2-RELEASE #7: Wed Feb 16 13:33:10 PST 2011
    root at build8x64.pcbsd.org:/usr/obj/usr/pcbsd-build82/fbsd-source/8.2/sys/PCBSD
amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Dual-Core AMD Opteron(tm) Processor 2216 (2400.02-MHz K8-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40f12  Family = f  Model = 41  Stepping =
2

Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
  Features2=0x2001<SSE3,CX16>
  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
  AMD Features2=0x1f<LAHF,CMP,SVM,ExtAPIC,CR8>
real memory  = 8590983168 (8193 MB)
avail memory = 8225366016 (7844 MB)
ACPI APIC Table: <HP     COBRA   >
FreeBSD/SMP: Multiprocessor System Detected: 4 CPUs
FreeBSD/SMP: 2 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
 cpu2 (AP): APIC ID:  2
 cpu3 (AP): APIC ID:  3
ACPI Warning: Optional field Pm2ControlBlock has zero address or length:
0x0000000000000000/0x1 (20101013/tbfadt-655)
ioapic1: Changing APIC ID to 9
ioapic0 <Version 1.1> irqs 0-23 on motherboard
ioapic1 <Version 1.1> irqs 24-47 on motherboard
Cuse4BSD v0.1.13 @ /dev/cuse
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <HPQOEM SLIC-WKS> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, cff00000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
cpu2: <ACPI CPU> on acpi0
cpu3: <ACPI CPU> on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
acpi_sysresource2: Conflicts with PCI device 0:1:1
pci0: <memory, RAM> at device 0.0 (no driver attached)
isab0: <PCI-ISA bridge> at device 1.0 on pci0
isa0: <ISA bus> on isab0
pci0: <serial bus, SMBus> at device 1.1 (no driver attached)
ohci0: <nVidia nForce MCP55 USB Controller> mem 0xe3344000-0xe3344fff irq 5
at device 2.0 on pci0
ohci0: [ITHREAD]
usbus0: <nVidia nForce MCP55 USB Controller> on ohci0
ehci0: <NVIDIA nForce MCP55 USB 2.0 controller> mem 0xe334a000-0xe334a0ff
irq 10 at device 2.1 on pci0
ehci0: [ITHREAD]
usbus1: EHCI version 1.0
usbus1: <NVIDIA nForce MCP55 USB 2.0 controller> on ehci0
atapci0: <nVidia nForce MCP55 UDMA133 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x4080-0x408f at device 4.0 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
atapci1: <nVidia nForce MCP55 SATA300 controller> port
0x40c0-0x40c7,0x4100-0x4103,0x40c8-0x40cf,0x4104-0x4107,0x4090-0x409f mem
0xe3345000-0xe3345fff irq 17 at device 5.0 on pci0
atapci1: [ITHREAD]
ata2: <ATA channel 0> on atapci1
ata2: [ITHREAD]
ata3: <ATA channel 1> on atapci1
ata3: [ITHREAD]
atapci2: <nVidia nForce MCP55 SATA300 controller> port
0x40d0-0x40d7,0x4108-0x410b,0x40d8-0x40df,0x410c-0x410f,0x40a0-0x40af mem
0xe3346000-0xe3346fff irq 5 at device 5.1 on pci0
atapci2: [ITHREAD]
ata4: <ATA channel 0> on atapci2
ata4: [ITHREAD]
ata5: <ATA channel 1> on atapci2
ata5: [ITHREAD]
atapci3: <nVidia nForce MCP55 SATA300 controller> port
0x40e0-0x40e7,0x4110-0x4113,0x40e8-0x40ef,0x4114-0x4117,0x40b0-0x40bf mem
0xe3347000-0xe3347fff irq 10 at device 5.2 on pci0
atapci3: [ITHREAD]
ata6: <ATA channel 0> on atapci3
ata6: [ITHREAD]
ata7: <ATA channel 1> on atapci3
ata7: [ITHREAD]
pcib1: <ACPI PCI-PCI bridge> at device 6.0 on pci0
pci1: <ACPI PCI bus> on pcib1
fwohci0: <Texas Instruments TSB43AB22/A> mem
0xe3204000-0xe32047ff,0xe3200000-0xe3203fff irq 10 at device 5.0 on pci1
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=1)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 00:60:b0:00:00:1e:51:78
fwohci0: Phy 1394a available S400, 2 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 02:60:b0:1e:51:78
fwe0: Ethernet address: 02:60:b0:1e:51:78
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 00:60:b0:00:00:1e:51:78 @ 0xfffe00000000, S400,
maxrec 2048
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x20bc000
sbp0: <SBP-2/SCSI over FireWire> on firewire0
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER
mode
pci0: <multimedia, HDA> at device 6.1 (no driver attached)
nfe0: <NVIDIA nForce MCP55 Networking Adapter> port 0x40f0-0x40f7 mem
0xe3348000-0xe3348fff,0xe334a100-0xe334a1ff,0xe334a300-0xe334a30f irq 5 at
device 8.0 on pci0
miibus0: <MII bus> on nfe0
e1000phy0: <Marvell 88E1149 Gigabit PHY> PHY 0 on miibus0
e1000phy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
nfe0: Ethernet address: 00:19:bb:eb:51:c4
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe0: [FILTER]
nfe1: <NVIDIA nForce MCP55 Networking Adapter> port 0x40f8-0x40ff mem
0xe3349000-0xe3349fff,0xe334a200-0xe334a2ff,0xe334a310-0xe334a31f irq 10 at
device 9.0 on pci0
miibus1: <MII bus> on nfe1
e1000phy1: <Marvell 88E1149 Gigabit PHY> PHY 1 on miibus1
e1000phy1:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
1000baseT-master, 1000baseT-FDX, 1000baseT-FDX-master, auto, auto-flow
nfe1: Ethernet address: 00:19:bb:eb:51:c5
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
nfe1: [FILTER]
pcib2: <ACPI PCI-PCI bridge> at device 13.0 on pci0
pci43: <ACPI PCI bus> on pcib2
pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci43
pci44: <ACPI PCI bus> on pcib3
pcib4: <ACPI PCI-PCI bridge> mem 0xe3100000-0xe310007f at device 0.1 on
pci43
pci45: <ACPI PCI bus> on pcib4
pcib5: <ACPI PCI-PCI bridge> at device 15.0 on pci0
pci24: <ACPI PCI bus> on pcib5
vgapci0: <VGA-compatible display> port 0x3000-0x307f mem
0xe2000000-0xe2ffffff,0xd0000000-0xdfffffff,0xe0000000-0xe1ffffff irq 5 at
device 0.0 on pci24
nvidia0: <GeForce GT 240> on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [ITHREAD]
pci24: <multimedia, HDA> at device 0.1 (no driver attached)
pcib6: <ACPI Host-PCI bridge> on acpi0
pci64: <ACPI PCI bus> on pcib6
pci64: <memory, RAM> at device 0.0 (no driver attached)
pci64: <memory, RAM> at device 1.0 (no driver attached)
pci64: <serial bus, SMBus> at device 1.1 (no driver attached)
pcib7: <ACPI PCI-PCI bridge> at device 13.0 on pci64
pci107: <ACPI PCI bus> on pcib7
mpt0: <LSILogic SAS/SATA Adapter> port 0x1000-0x10ff mem
0xe3410000-0xe3413fff,0xe3400000-0xe340ffff irq 43 at device 0.0 on pci107
mpt0: [ITHREAD]
mpt0: MPI Version=1.5.13.0
mpt0: Capabilities: ( RAID-0 RAID-1E RAID-1 )
mpt0: 0 Active Volumes (2 Max)
mpt0: 0 Hidden Drive Members (10 Max)
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse Explorer, device ID 4
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
powernow0: <PowerNow! K8> on cpu0
powernow1: <PowerNow! K8> on cpu1
powernow2: <PowerNow! K8> on cpu2
powernow3: <PowerNow! K8> on cpu3
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me)
firewire0: bus manager 0
ZFS filesystem version 4
ZFS storage pool version 15
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 480Mbps High Speed USB v2.0
ugen0.1: <nVidia> at usbus0
uhub0: <nVidia OHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <nVidia> at usbus1
uhub1: <nVidia EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus1
uhub0: 10 ports with 10 removable, self powered
acd0: DVDROM <TSSTcorpDVD-ROM TS-H352C/BB01> at ata0-master UDMA40
acd1: DVDR <SONY DVD RW DRU-830A/SS25> at ata0-slave UDMA66
ad4: 953869MB <Seagate ST31000340AS SD15> at ata2-master UDMA100 SATA 3Gb/s
ad6: 953869MB <Seagate ST31000340AS SD15> at ata3-master UDMA100 SATA
1.5Gb/s
ad8: 953869MB <Seagate ST31000340AS SD15> at ata4-master UDMA100 SATA 3Gb/s
GEOM: ad6s1: geometry does not match label (255h,63s != 16h,63s).
GEOM: ad8s1: geometry does not match label (255h,63s != 16h,63s).
GEOM: ufsid/4d0ae442572f41fd: geometry does not match label (255h,63s !=
16h,63s).
GEOM: ufsid/4d0aea4f0c53ef43: geometry does not match label (255h,63s !=
16h,63s).
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
(probe80:ata0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe80:ata0:0:0:0): CAM status: SCSI Status Error
(probe80:ata0:0:0:0): SCSI status: Check Condition
(probe80:ata0:0:0:0): SCSI sense: NOT READY asc:3a,1 (Medium not present -
tray closed)
uhub1: 10 ports with 10 removable, self powered
(probe81:ata0:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe81:ata0:0:1:0): CAM status: SCSI Status Error
(probe81:ata0:0:1:0): SCSI status: Check Condition
(probe81:ata0:0:1:0): SCSI sense: NOT READY asc:3a,1 (Medium not present -
tray closed)
cd0 at ata0 bus 0 scbus3 target 0 lun 0
cd0: <TSSTcorp DVD-ROM TS-H352C BB01> Removable CD-ROM SCSI-0 device
cd0: 3.300MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present -
tray closed
SMP: AP CPU #1 Launched!
SMP: AP CPU #2 Launched!
SMP: AP CPU #3 Launched!
cd1 at ata0 bus 0 scbus3 target 1 lun 0
cd1: <SONY DVD RW DRU-830A SS25> Removable CD-ROM SCSI-0 device
cd1: 66.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present -
tray closed
Trying to mount root from ufs:/dev/label/rootfs0
WARNING: / was not properly dismounted
GEOM: ufsid/4d0ae442572f41fd: geometry does not match label (255h,63s !=
16h,63s).
GEOM: ufsid/4d0aea4f0c53ef43: geometry does not match label (255h,63s !=
16h,63s).
WARNING: /var was not properly dismounted
/var: mount pending error: blocks 408 files 15
WARNING: /usr was not properly dismounted
hdac0: <NVidia MCP55 High Definition Audio Controller> mem
0xe3340000-0xe3343fff irq 18 at device 6.1 on pci0
hdac0: HDA Driver Revision: 20100226_0142
hdac0: [ITHREAD]
hdac0: HDA Codec #0: Realtek ALC262
hdac1: <NVidia (Unknown) High Definition Audio Controller> mem
0xe3000000-0xe3003fff irq 5 at device 0.1 on pci24
hdac1: HDA Driver Revision: 20100226_0142
hdac1: [ITHREAD]
hdac1: HDA Codec #0: NVidia (Unknown)
hdac1: HDA Codec #1: NVidia (Unknown)
hdac1: HDA Codec #2: NVidia (Unknown)
hdac1: HDA Codec #3: NVidia (Unknown)
pcm0: <HDA Realtek ALC262 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm1: <HDA Realtek ALC262 PCM #1 Digital> at cad 0 nid 1 on hdac0
pcm2: <HDA NVidia (Unknown) PCM #0 DisplayPort> at cad 0 nid 1 on hdac1
pcm3: <HDA NVidia (Unknown) PCM #0 DisplayPort> at cad 1 nid 1 on hdac1
pcm4: <HDA NVidia (Unknown) PCM #0 DisplayPort> at cad 2 nid 1 on hdac1
pcm5: <HDA NVidia (Unknown) PCM #0 DisplayPort> at cad 3 nid 1 on hdac1
nfe0: tx v2 error 0x6204<UNDERFLOW>
nfe0: tx v2 error 0x6204<UNDERFLOW>
nfe0: tx v2 error 0x6204<UNDERFLOW>

-----------------Messages Output----------------------

Feb 24 23:51:27 rtbank fsck: /dev/label/var0: SIZE=512 MTIME=Feb 24 23:50
2011  COUNT 5 SHOULD BE 4 (ADJUSTED)
Feb 24 23:51:27 rtbank fsck: /dev/label/var0: UNREF DIR I=212039  OWNER=root
MODE=40755
Feb 24 23:51:27 rtbank fsck: /dev/label/var0: SIZE=512 MTIME=Feb 24 00:53
2011  (CLEARED)
Feb 24 23:51:27 rtbank fsck: /dev/label/var0: UNREF FILE I=212040  OWNER=IR
MODE=140660
Feb 24 23:51:27 rtbank fsck: /dev/label/var0: SIZE=0 MTIME=Feb 24 00:53
2011  (CLEARED)
Feb 24 23:51:27 rtbank fsck: /dev/label/var0: Reclaimed: 0 directories, 22
files, 1 fragments
Feb 24 23:51:27 rtbank fsck: /dev/label/var0: 4979 files, 25586 used, 987428
free (1228 frags, 123275 blocks, 0.1% fragmentation)
Feb 24 23:55:01 rtbank login: ROOT LOGIN (root) ON ttyv1
Feb 24 23:57:23 rtbank power_profile: changed to 'performance'
Feb 25 00:09:52 rtbank fsck: /dev/label/usr0: UNREF FILE I=1106975  OWNER=IR
MODE=100644
Feb 25 00:09:52 rtbank fsck: /dev/label/usr0: SIZE=6509 MTIME=Feb 24 22:14
2011  (CLEARED)
Feb 25 00:09:52 rtbank fsck: /dev/label/usr0: UNREF FILE I=1108023  OWNER=IR
MODE=100644
Feb 25 00:09:52 rtbank fsck: /dev/label/usr0: SIZE=0 MTIME=Feb 24 18:03
2011  (CLEARED)
Feb 25 00:09:52 rtbank fsck: /dev/label/usr0: Reclaimed: 0 directories, 1
files, -1 fragments
Feb 25 00:09:52 rtbank fsck: /dev/label/usr0: 601971 files, 12774199 used,
373147696 free (70856 frags, 46634605 blocks, 0.0% fragmentation)
Feb 25 09:00:00 rtbank su: IR to root on /dev/pts/1
Feb 25 09:03:14 rtbank kernel: nfe0: tx v2 error 0x6204<UNDERFLOW>
Feb 25 09:03:44 rtbank kernel: nfe0: tx v2 error 0x6204<UNDERFLOW>
Feb 25 09:05:17 rtbank kernel: nfe0: tx v2 error 0x6204<UNDERFLOW>
Feb 25 09:06:44 rtbank su: IR to root on /dev/pts/3

------------------pciconf-----------------------------

none0 at pci0:0:0:0:    class=0x050000 card=0x12fe103c chip=0x036910de rev=0xa2
hdr=0x00
    vendor     = 'NVIDIA Corporation'
    device     = 'MCP55 Memory Controller'
    class      = memory
    subclass   = RAM
isab0 at pci0:0:1:0:    class=0x060100 card=0x12fe103c chip=0x036410de rev=0xa3
hdr=0x00
    vendor     = 'NVIDIA Corporation'
    device     = 'MCP55 LPC Bridge'
    class      = bridge
    subclass   = PCI-ISA
none1 at pci0:0:1:1:    class=0x0c0500 card=0x12fe103c chip=0x036810de rev=0xa3
hdr=0x00
    vendor     = 'NVIDIA Corporation'
    device     = 'SMBus controller ((0xCB84 integrated chip nForce Pro
3400))'
    class      = serial bus
    subclass   = SMBus
ohci0 at pci0:0:2:0:    class=0x0c0310 card=0x12fe103c chip=0x036c10de rev=0xa1
hdr=0x00
    vendor     = 'NVIDIA Corporation'
    device     = 'Standard OpenHCD USB Hostcontroller (81FB1043)'
    class      = serial bus
    subclass   = USB
ehci0 at pci0:0:2:1:    class=0x0c0320 card=0x12fe103c chip=0x036d10de rev=0xa2
hdr=0x00
    vendor     = 'NVIDIA Corporation'
    device     = 'Standard PCI-to-USB Enhanced Hostcontroller (81FB1043)'
    class      = serial bus
    subclass   = USB
atapci0 at pci0:0:4:0:    class=0x01018a card=0x12fe103c chip=0x036e10de
rev=0xa1 hdr=0x00
    vendor     = 'NVIDIA Corporation'
    device     = 'MCP55 PATA Controller (MCP55)'
    class      = mass storage
    subclass   = ATA
atapci1 at pci0:0:5:0:    class=0x010185 card=0x12fe103c chip=0x037f10de
rev=0xa3 hdr=0x00
    vendor     = 'NVIDIA Corporation'
    device     = 'MCP55 SATA/RAID Controller (MCP55S)'
    class      = mass storage
    subclass   = ATA
atapci2 at pci0:0:5:1:    class=0x010185 card=0x12fe103c chip=0x037f10de
rev=0xa3 hdr=0x00
    vendor     = 'NVIDIA Corporation'
    device     = 'MCP55 SATA/RAID Controller (MCP55S)'
    class      = mass storage
    subclass   = ATA
atapci3 at pci0:0:5:2:    class=0x010185 card=0x12fe103c chip=0x037f10de
rev=0xa3 hdr=0x00
    vendor     = 'NVIDIA Corporation'
    device     = 'MCP55 SATA/RAID Controller (MCP55S)'
    class      = mass storage
    subclass   = ATA
pcib1 at pci0:0:6:0:    class=0x060401 card=0xcb8410de chip=0x037010de rev=0xa2
hdr=0x01
    vendor     = 'NVIDIA Corporation'
    device     = 'MCP55 PCI bridge'
    class      = bridge
    subclass   = PCI-PCI
hdac0 at pci0:0:6:1:    class=0x040300 card=0x12fe103c chip=0x037110de rev=0xa2
hdr=0x00
    vendor     = 'NVIDIA Corporation'
    device     = 'High Definition Audio Controller (MCP55)'
    class      = multimedia
    subclass   = HDA
nfe0 at pci0:0:8:0:    class=0x068000 card=0x12fe103c chip=0x037310de rev=0xa3
hdr=0x00
    vendor     = 'NVIDIA Corporation'
    device     = 'MCP55 Ethernet'
    class      = bridge
nfe1 at pci0:0:9:0:    class=0x068000 card=0x12fe103c chip=0x037310de rev=0xa3
hdr=0x00
    vendor     = 'NVIDIA Corporation'
    device     = 'MCP55 Ethernet'
    class      = bridge
pcib2 at pci0:0:13:0:    class=0x060400 card=0x000010de chip=0x037810de
rev=0xa3 hdr=0x01
    vendor     = 'NVIDIA Corporation'
    device     = 'MCP55 PCIe bridge'
    class      = bridge
    subclass   = PCI-PCI
pcib5 at pci0:0:15:0:    class=0x060400 card=0x000010de chip=0x037710de
rev=0xa3 hdr=0x01
    vendor     = 'NVIDIA Corporation'
    device     = 'MCP55 PCIe bridge'
    class      = bridge
    subclass   = PCI-PCI
hostb0 at pci0:0:24:0:    class=0x060000 card=0x00000000 chip=0x11001022
rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices (AMD)'
    device     = 'Athlon64/Opteron/Sempron (K8 Family) HyperTransport
Technology Configuration'
    class      = bridge
    subclass   = HOST-PCI
hostb1 at pci0:0:24:1:    class=0x060000 card=0x00000000 chip=0x11011022
rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices (AMD)'
    device     = 'Athlon64/Opteron/Sempron (K8 Family) Address Map'
    class      = bridge
    subclass   = HOST-PCI
hostb2 at pci0:0:24:2:    class=0x060000 card=0x00000000 chip=0x11021022
rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices (AMD)'
    device     = 'Athlon64/Opteron/Sempron (K8 Family) DRAM Controller'
    class      = bridge
    subclass   = HOST-PCI
hostb3 at pci0:0:24:3:    class=0x060000 card=0x00000000 chip=0x11031022
rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices (AMD)'
    device     = 'Athlon64/Opteron/Sempron (K8 Family) Miscellaneous
Control'
    class      = bridge
    subclass   = HOST-PCI
hostb4 at pci0:0:25:0:    class=0x060000 card=0x00000000 chip=0x11001022
rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices (AMD)'
    device     = 'Athlon64/Opteron/Sempron (K8 Family) HyperTransport
Technology Configuration'
    class      = bridge
    subclass   = HOST-PCI
hostb5 at pci0:0:25:1:    class=0x060000 card=0x00000000 chip=0x11011022
rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices (AMD)'
    device     = 'Athlon64/Opteron/Sempron (K8 Family) Address Map'
    class      = bridge
    subclass   = HOST-PCI
hostb6 at pci0:0:25:2:    class=0x060000 card=0x00000000 chip=0x11021022
rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices (AMD)'
    device     = 'Athlon64/Opteron/Sempron (K8 Family) DRAM Controller'
    class      = bridge
    subclass   = HOST-PCI
hostb7 at pci0:0:25:3:    class=0x060000 card=0x00000000 chip=0x11031022
rev=0x00 hdr=0x00
    vendor     = 'Advanced Micro Devices (AMD)'
    device     = 'Athlon64/Opteron/Sempron (K8 Family) Miscellaneous
Control'
    class      = bridge
    subclass   = HOST-PCI
fwohci0 at pci0:1:5:0:    class=0x0c0010 card=0x12fe103c chip=0x8023104c
rev=0x00 hdr=0x00
    vendor     = 'Texas Instruments (TI)'
    device     = 'IEEE1394a-2000 OHCI PHY/Link-Layer Ctrlr (TSB43AB21/A)'
    class      = serial bus
    subclass   = FireWire
pcib3 at pci0:43:0:0:    class=0x060400 card=0x00000000 chip=0x01251033
rev=0x06 hdr=0x01
    vendor     = 'NEC Electronics Hong Kong'
    device     = 'uPD720400 PCI Express - PCI/PCI-X Bridge'
    class      = bridge
    subclass   = PCI-PCI
pcib4 at pci0:43:0:1:    class=0x060400 card=0x00000000 chip=0x01251033
rev=0x06 hdr=0x01
    vendor     = 'NEC Electronics Hong Kong'
    device     = 'uPD720400 PCI Express - PCI/PCI-X Bridge'
    class      = bridge
    subclass   = PCI-PCI
vgapci0 at pci0:24:0:0:    class=0x030000 card=0x0789196e chip=0x0ca310de
rev=0xa2 hdr=0x00
    vendor     = 'NVIDIA Corporation'
    class      = display
    subclass   = VGA
hdac1 at pci0:24:0:1:    class=0x040300 card=0x0789196e chip=0x0be410de
rev=0xa1 hdr=0x00
    vendor     = 'NVIDIA Corporation'
    class      = multimedia
    subclass   = HDA
none2 at pci0:64:0:0:    class=0x050000 card=0x12fe103c chip=0x036910de
rev=0xa2 hdr=0x00
    vendor     = 'NVIDIA Corporation'
    device     = 'MCP55 Memory Controller'
    class      = memory
    subclass   = RAM
none3 at pci0:64:1:0:    class=0x050000 card=0x12fe103c chip=0x036110de
rev=0xa3 hdr=0x00
    vendor     = 'NVIDIA Corporation'
    device     = 'MCP55 LPC Bridge'
    class      = memory
    subclass   = RAM
none4 at pci0:64:1:1:    class=0x0c0500 card=0x12fe103c chip=0x036810de
rev=0xa3 hdr=0x00
    vendor     = 'NVIDIA Corporation'
    device     = 'SMBus controller ((0xCB84 integrated chip nForce Pro
3400))'
    class      = serial bus
    subclass   = SMBus
pcib7 at pci0:64:13:0:    class=0x060400 card=0x000010de chip=0x037810de
rev=0xa3 hdr=0x01
    vendor     = 'NVIDIA Corporation'
    device     = 'MCP55 PCIe bridge'
    class      = bridge
    subclass   = PCI-PCI
mpt0 at pci0:107:0:0:    class=0x010000 card=0x12fe103c chip=0x00581000
rev=0x02 hdr=0x00
    vendor     = 'LSI Logic (Was: Symbios Logic, NCR)'
    device     = 'SAS 3000 series, 8-port with 1068E -StorPort'
    class      = mass storage
    subclass   = SCSI

------------------xorg.conf---------------------------

# Xorg.conf file generated for PC-BSD

Section "ServerLayout"
    Identifier     "XFree86 Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "ServerFlags"
        Option "AutoAddDevices" "False"
        Option "AllowEmptyInput" "Off"
EndSection

Section "Files"
    ModulePath      "/usr/local/lib/xorg/modules"
    FontPath        "/Programs/fonts/"
    FontPath        "/usr/local/lib/X11/fonts/cyrillic/"
    FontPath        "/usr/local/lib/X11/fonts/TrueType/"
    FontPath        "/usr/local/lib/X11/fonts/webfonts/"
    FontPath        "/usr/local/lib/X11/fonts/misc/"
    FontPath        "/usr/local/lib/X11/fonts/TTF/"
    FontPath        "/usr/local/lib/X11/fonts/Type1/"
    FontPath        "/usr/local/lib/X11/fonts/CID/"
    FontPath        "/usr/local/lib/X11/fonts/75dpi/"
    FontPath        "/usr/local/lib/X11/fonts/100dpi/"
    FontPath        "/usr/local/lib/X11/fonts/dejavu/"
    FontPath        "/usr/local/lib/X11/fonts/local/"
EndSection

Section "Module"
    Load           "ddc"
    Load           "dbe"
    Load           "extmod"
    Load       "glx"
EndSection

Section "InputDevice"
    Identifier     "Keyboard0"
    Driver         "keyboard"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "us"
    Option         "XkbVariant" ""
EndSection

Section "InputDevice"
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/sysmouse"
    Option         "Buttons" "6"
    Option         "ZAxisMapping" "4 5"
    Option         "Emulate3Buttons"
EndSection

Section "Extensions"
    Option    "Composite" "Enable"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Monitor Vendor"
    ModelName      "Monitor Model"

    HorizSync    30.0-121.0
    VertRefresh  50.0-150.0
EndSection


Section "Device"
    Identifier      "Card0"
    Screen           0
#    Option         "AllowGLXWithComposite" "true"
#    Option         "RenderAccel" "true"
#    Option         "AddARGBGLXVisuals" "true"
#    Option         "UseEvents" "false"
#    Option         "TripleBuffer" "1"
#    Option         "DamageEvents" "1"
#    Option         "BackingStore" "1"
#    Option         "PixmapCacheSize" "70000"
#    Option         "OnDemandVBlankInterrupts" "true"
#    Option         "XAANoOffscreenPixmaps" "true"
    Option         "NoLogo" "True"
    Driver         "nvidia"
    VendorName     "nVidia Corporation"
    BusID      "PCI:24:0:0"
EndSection


Section "Screen"
    Identifier     "Screen0"
    Device         "Card0"
    Monitor        "Monitor0"
    DefaultDepth   24
    SubSection     "Display"
        Depth      24
        Modes      "1800x1440"
    EndSubSection
EndSection

------------------RC File-----------------------------

background_dhclient="YES"
compat5x_enable="YES"
sshd_enable="YES"
devd_enable="YES"
devfs_system_ruleset="devfsrules_common"
ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/kde4/lib
/usr/local/lib/compat/pkg"

# Disable Sendmail by default
sendmail_enable="NONE"

# Enable console mouse
moused_type="auto"
moused_enable="YES"

# Enable the pcbsd startup / shutdown scripts
pcbsdinit_enable="YES"

#Enable samba server
samba_enable="YES"
winbindd_enable="YES"

# Disable LPD
lpd_enable="NO"

# Enable CUPS
cupsd_enable="YES"
linux_enable="YES"

# FSCK Enhancements
fsck_y_enable="YES"

# Denyhosts Startup
denyhosts_enable="YES"

# powerd: adaptive speed while on AC power, adaptive while on battery power
powerd_enable="YES"
powerd_flags="-a hiadaptive -b adaptive" # set CPU frequency

# enable HAL / DBUS
dbus_enable="YES"
hald_enable="YES"

# Enables support for HPLIP
hpiod_enable="NO"
hpssd_enable="NO"

# Enable the firewall
pf_rules="/etc/pf.conf"
pf_enable="YES"
pf_flags=""

# Enable sound-support
snddetect_enable="YES"
mixer_enable="YES"

# Enable avahi_daemon
avahi_daemon_enable="YES"

# Run the port jail
portjail_enable="YES"

# Added for sound support in the portjail, access to /dev/random, /dev/null,
etc.
jail_pcbsd_devfs_enable="YES"

# Start the swapmonitor
swapmonitor_enable="YES"

# Enable IPV6 support
ipv6_enable="YES"

# Enable BSDStats
bsdstats_enable="YES"

# Enable webcamd
webcamd_enable="YES"

# Disable writing syslogs to remote devices by default
syslogd_flags="-ss"
ntpd_enable="YES"
ntpd_sync_on_start="YES"
keymap="us U.S..iso"
# Auto-Enabled NICs from pc-sysinstall
ifconfig_nfe0="DHCP"
ifconfig_nfe1="DHCP"
hostname="rtbank"

------------------Loader File-------------------------

# Kernel Options
kern.ipc.shmseg=1024
kern.ipc.shmmni=1024
kern.maxproc=10000

# Load Wireless Support
if_ipw_load="YES"
if_iwi_load="YES"
if_wpi_load="YES"
if_iwn_load="YES"
if_bwn_load="YES"
legal.intel_ipw.license_ack=1
legal.intel_iwi.license_ack=1
legal.intel_wpi.license_ack=1
legal.intel_iwn.license_ack=1

# Enable usb Webcam Support
cuse4bsd_load="YES"
pwc_load="YES"

# Load mmc card-reader support
mmc_load="YES"
mmcsd_load="YES"

# Load additional sata device support
ahci_load="YES"
siis_load="YES"
sdhci_load="YES"

# Load support for scd
scd_load="YES"

# Load sound-support
sound_load="YES"
snd_uaudio_load="YES"

# Load geom support
geom_journal_load="YES"
geom_uzip_load="YES"
geom_mirror_load="YES"
geom_eli_load="YES"

# Load Serial Bus Protocol Support
sbp_load="YES"

# Load File-System Support
libiconv_load="YES"
libmchain_load="YES"
cd9660_iconv_load="YES"
msdosfs_iconv_load="YES"
ntfs_load="YES"
ntfs_iconv_load="YES"
udf_load="YES"
udf_iconv_load="YES"
zfs_load="YES"
tmpfs_load="YES"

# Disable acpi throttle by default, fixes issues with powerd and later AMDs
hint.acpi_throttle.0.disabled="1"

# Fix crashes on 32bit with Nvidia
machdep.disable_mtrrs=1
sem_load="YES"
nvidia_load="YES"

------------------Free Space--------------------------

Filesystem         1M-blocks   Used  Avail Capacity  Mounted on
/dev/label/rootfs0      1978    605   1215    33%    /
devfs                      0      0      0   100%    /dev
/dev/label/var0         1978     49   1770     3%    /var
/dev/label/usr0       753753  24901 668551     4%    /usr
/dev/ad6s1d           923850 255773 594168    30%    /mnt/home2
/dev/ad8s1d           923850 188351 661590    22%    /mnt/home3
procfs                     0      0      0   100%    /proc
linprocfs                  0      0      0   100%    /compat/linux/proc
/tmp                    1978    605   1215    33%    /usr/jails/portjail/tmp
/media                  1978    605   1215    33%
/usr/jails/portjail/media
/usr/home             753753  24901 668551     4%
/usr/jails/portjail/usr/home
devfs                      0      0      0   100%    /usr/jails/portjail/dev
procfs                     0      0      0   100%
/usr/jails/portjail/proc
/usr/src              753753  24901 668551     4%
/usr/jails/portjail/usr/src
linprocfs                  0      0      0   100%
/usr/jails/portjail/compat/linux/proc

------------------System Processes--------------------

last pid: 18654;  load averages:  0.26,  0.15,  0.05  up 0+09:17:32
09:07:13
229 processes: 2 running, 227 sleeping

Mem: 576M Active, 859M Inact, 738M Wired, 10M Cache, 826M Buf, 5712M Free
Swap: 18G Total, 18G Free


  PID USERNAME    THR PRI NICE   SIZE    RES STATE   C   TIME   WCPU COMMAND
 6908 IR           13  44    0   348M   223M ucond   0   1:36  3.76%
firefox-bin
18521 root          3  46    0   218M 50528K kqread  2   0:01  2.44%
kcmshell4
18532 root          2  76    0   176M 35356K kqread  1   0:01  1.76%
kdeinit4
 2383 root          1  45    0   903M 68436K CPU2    2   0:46  1.17% Xorg
18590 root          1  64    0   101M 26856K select  0   0:00  0.98%
kdeinit4
18591 root          1  44    0    98M 24116K select  3   0:00  0.78%
kdeinit4
18529 root          1  44    0   101M 23236K select  0   0:00  0.68%
kdeinit4
18528 root          1  44    0 82072K 18100K select  2   0:00  0.68%
kdeinit4
18525 root          1  76    0 16692K  2500K select  1   0:00  0.39%
dbus-launch
18526 root          1  44    0  8120K  2148K select  0   0:00  0.29%
dbus-daemon
 2670 IR            3  76    0   505M   112M select  3   1:16  0.20%
kdeinit4
 2665 IR            3  76    0   374M 71252K kqread  2   0:03  0.20% kwin
18490 IR            2  61    0   202M 38096K select  1   0:01  0.20% kdesu
18516 IR            1  50    0 21820K  2060K wait    2   0:00  0.20% su
18517 root          1  57    0 10316K  2360K pause   0   0:00  0.20% csh
18519 root          1  71    0  5828K  1404K wait    1   0:00  0.20%
kdesu_stub
 2886 IR            2  47    0   371M 66652K kqread  0   3:52  0.00%
kdeinit4
 2808 IR           22  44    0   147M 39232K ucond   2   0:15  0.00% mysqld







Ian Robinson
Salem, OH
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.pcbsd.org/pipermail/testing/attachments/20110226/10cd3aee/attachment-0001.html>


More information about the Testing mailing list