[PC-BSD Testing] Testing Floppies - Continued

doverosx at gmail.com doverosx at gmail.com
Sun Jan 10 13:42:02 PST 2010


Ian Robinson wrote:
> Re:  Testing Floppies, Brodey Dover asked:
>
> >Can I see the dmesg output please?
> >and now that I think about it. lshal from working computer
> >with floppydrive and lshal from the non-working computer please.
>
> 1.  Dmesg output (actually from System Settings/System Manager "Generate"
>
> PC-BSD 8.0-BETA Diagnostic Sheet
> Generated: Sun Jan 10 16:03:41 EST 2010
>
> -----------------Dmesg Output-------------------------
>
> Copyright (c) 1992-2009 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>     The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 8.0-RELEASE-p1 #3: Fri Dec 11 13:33:42 PST 2009
>     
> root at build8x32.pcbsd.org:/usr/obj/usr/pcbsd-build80/fbsd-source/8.0-src/sys/PCBSD
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel Pentium III (996.68-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0x686  Stepping = 6
>   
> Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
> real memory  = 536870912 (512 MB)
> avail memory = 502050816 (478 MB)
> kbd1 at kbdmux0
> module_register_init: MOD_LOAD (splash_pcx, 0xc0fbe830, 0) error 2
> cryptosoft0: <software crypto> on motherboard
> acpi0: <PTLTD   RSDT> on motherboard
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> on hostb0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci2: <ACPI PCI bus> on pcib1
> vgapci0: <VGA-compatible display> mem 
> 0xe4000000-0xe4ffffff,0xf0000000-0xf3ffffff,0xec000000-0xec07ffff irq 
> 10 at device 0.0 on pci2
> nvidia0: <GeForce4 Ti 4200> on vgapci0
> vgapci0: child nvidia0 requested pci_enable_busmaster
> vgapci0: child nvidia0 requested pci_enable_io
> nvidia0: [GIANT-LOCKED]
> nvidia0: [ITHREAD]
> pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci1: <ACPI PCI bus> on pcib2
> xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x2000-0x207f mem 
> 0xe5000000-0xe500007f irq 5 at device 4.0 on pci1
> miibus0: <MII bus> on xl0
> ukphy0: <Generic IEEE 802.3u media interface> PHY 24 on miibus0
> ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
> xl0: Ethernet address: 00:04:75:50:68:48
> xl0: [ITHREAD]
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH UDMA66 controller> port 
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1800-0x180f at device 31.1 on pci0
> ata0: <ATA channel 0> on atapci0
> ata0: [ITHREAD]
> ata1: <ATA channel 1> on atapci0
> ata1: [ITHREAD]
> uhci0: <Intel 82801AA (ICH) USB controller> port 0x1820-0x183f at 
> device 31.2 on pci0
> uhci0: [ITHREAD]
> uhci0: LegSup = 0x2f00
> usbus0: <Intel 82801AA (ICH) USB controller> on uhci0
> pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
> pci0: <multimedia, audio> at device 31.5 (no driver attached)
> acpi_button0: <Power Button> on acpi0
> atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> atkbd0: [ITHREAD]
> psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: [ITHREAD]
> psm0: model IntelliMouse, device ID 3
> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on 
> acpi0
> fdc0: [FILTER]
> fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> uart0: [FILTER]
> uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
> uart1: [FILTER]
> ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
> ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
> ppc0: [ITHREAD]
> ppbus0: <Parallel port bus> on ppc0
> lpt0: <Printer> on ppbus0
> lpt0: [ITHREAD]
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> plip0: <PLIP network interface> on ppbus0
> plip0: [ITHREAD]
> cpu0: <ACPI CPU> on acpi0
> pmtimer0 on isa0
> orm0: <ISA Option ROMs> at iomem 
> 0xc0000-0xcefff,0xcf000-0xcf7ff,0xe4000-0xeffff pnpid ORM0000 on isa0
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> ZFS NOTICE: Prefetch is disabled by default on i386 -- to enable,
>             add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
> ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable 
> behavior.
>              Consider tuning vm.kmem_size and vm.kmem_size_max
>              in /boot/loader.conf.
> ZFS filesystem version 13
> ZFS storage pool version 13
> Timecounter "TSC" frequency 996681955 Hz quality 800
> Timecounters tick every 1.000 msec
> usbus0: 12Mbps Full Speed USB v1.0
> ad0: 29311MB <Maxtor 5T030H3 TAH71DP0> at ata0-master UDMA66
> ugen0.1: <Intel> at usbus0
> uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
> acd0: DVDROM <HITACHI DVD-ROM GD-8000/0008> at ata1-master UDMA33
> acd1: DVDR <HP DVD Writer 640/CS30> at ata1-slave UDMA33
> uhub0: 2 ports with 2 removable, self powered
> acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
> acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
> (probe0:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
> (probe0:ata1:0:0:0): CAM Status: SCSI Status Error
> (probe0:ata1:0:0:0): SCSI Status: Check Condition
> (probe0:ata1:0:0:0): NOT READY asc:3a,0
> (probe0:ata1:0:0:0): Medium not present
> (probe0:ata1:0:0:0): Unretryable error
> (probe1:ata1:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
> (probe1:ata1:0:1:0): CAM Status: SCSI Status Error
> (probe1:ata1:0:1:0): SCSI Status: Check Condition
> (probe1:ata1:0:1:0): NOT READY asc:3a,0
> (probe1:ata1:0:1:0): Medium not present
> (probe1:ata1:0:1:0): Unretryable error
> acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
> acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
> cd0 at ata1 bus 0 target 0 lun 0
> cd0: <HITACHI DVD-ROM GD-8000 0008> Removable CD-ROM SCSI-0 device
> cd0: 33.000MB/s transfers
> cd0: Attempt to query device size failed: NOT READY, Medium not present
> cd1 at ata1 bus 0 target 1 lun 0
> cd1: <HP DVD Writer 640c CS30> Removable CD-ROM SCSI-0 device
> cd1: 33.000MB/s transfers
> cd1: Attempt to query device size failed: NOT READY, Medium not present
> Trying to mount root from ufs:/dev/label/rootfs0
> ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based 
> forwarding disabled, default to deny, logging disabled
> pcm0: <Intel ICH (82801AA)> port 0x1200-0x12ff,0x1300-0x133f at device 
> 31.5 on pci0
> pcm0: [ITHREAD]
> pcm0: <Cirrus Logic CS4299 AC97 Codec>
> NVRM: detected agp.ko, aborting NVIDIA AGP setup!
>
> -----------------Messages Output----------------------
>
> Jan 10 15:54:38 pcbsd-4559 kernel: cd0 at ata1 bus 0 target 0 lun 0
> Jan 10 15:54:38 pcbsd-4559 kernel: cd0: <HITACHI DVD-ROM GD-8000 0008> 
> Removable CD-ROM SCSI-0 device
> Jan 10 15:54:38 pcbsd-4559 kernel: cd0: 33.000MB/s transfers
> Jan 10 15:54:38 pcbsd-4559 kernel: cd0: Attempt to query device size 
> failed: NOT READY, Medium not present
> Jan 10 15:54:38 pcbsd-4559 kernel: cd1 at ata1 bus 0 target 1 lun 0
> Jan 10 15:54:38 pcbsd-4559 kernel: cd1: <HP DVD Writer 640c CS30> 
> Removable CD-ROM SCSI-0 device
> Jan 10 15:54:38 pcbsd-4559 kernel: cd1: 33.000MB/s transfers
> Jan 10 15:54:38 pcbsd-4559 kernel: cd1: Attempt to query device size 
> failed: NOT READY, Medium not present
> Jan 10 15:54:38 pcbsd-4559 kernel: Trying to mount root from 
> ufs:/dev/label/rootfs0
> Jan 10 15:54:38 pcbsd-4559 kernel: ipfw2 (+ipv6) initialized, divert 
> loadable, nat loadable, rule-based forwarding disabled, default to 
> deny, logging disabled
> Jan 10 15:54:44 pcbsd-4559 kernel: pcm0: <Intel ICH (82801AA)> port 
> 0x1200-0x12ff,0x1300-0x133f at device 31.5 on pci0
> Jan 10 15:54:44 pcbsd-4559 kernel: pcm0: [ITHREAD]
> Jan 10 15:54:44 pcbsd-4559 kernel: pcm0: <Cirrus Logic CS4299 AC97 Codec>
> Jan 10 15:54:48 pcbsd-4559 ntpd[1355]: ntpd 4.2.4p5-a (1)
> Jan 10 15:54:53 pcbsd-4559 avahi-daemon[1648]: WARNING: No NSS support 
> for mDNS detected, consider installing nss-mdns!
> Jan 10 15:54:59 pcbsd-4559 kernel: NVRM: detected agp.ko, aborting 
> NVIDIA AGP setup!
> Jan 10 15:55:04 pcbsd-4559 kdm_greet[1987]: Cannot set locale. 
> Translations will not work.
> Jan 10 15:58:07 pcbsd-4559 ntpd[1356]: time reset +1.598948 s
> Jan 10 15:58:07 pcbsd-4559 ntpd[1356]: kernel time sync status change 2001
> Jan 10 16:03:15 pcbsd-4559 su: IR to root on /dev/pts/2
>
> ------------------pciconf-----------------------------
>
> hostb0 at pci0:0:0:0:    class=0x060000 card=0x11308086 chip=0x11308086 
> rev=0x02 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = '82815/EM/EP/P 815/EM/EP/P (Solano) Host to I/O Hub 
> Bridge'
>     class      = bridge
>     subclass   = HOST-PCI
> pcib1 at pci0:0:1:0:    class=0x060400 card=0x00000000 chip=0x11318086 
> rev=0x02 hdr=0x01
>     vendor     = 'Intel Corporation'
>     device     = '82815/EM/EP/P 815/EM/EP/P (Solano) PCI to AGP Bridge'
>     class      = bridge
>     subclass   = PCI-PCI
> pcib2 at pci0:0:30:0:    class=0x060400 card=0x00000000 chip=0x24188086 
> rev=0x02 hdr=0x01
>     vendor     = 'Intel Corporation'
>     device     = '82801AA 8xx Chipset Hub to PCI Bridge'
>     class      = bridge
>     subclass   = PCI-PCI
> isab0 at pci0:0:31:0:    class=0x060100 card=0x00000000 chip=0x24108086 
> rev=0x02 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = '82801AA 8xx Chipset LPC Interface Bridge'
>     class      = bridge
>     subclass   = PCI-ISA
> atapci0 at pci0:0:31:1:    class=0x010180 card=0x24118086 chip=0x24118086 
> rev=0x02 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'IDE Controller (UltraATA/66) (82801AA)'
>     class      = mass storage
>     subclass   = ATA
> uhci0 at pci0:0:31:2:    class=0x0c0300 card=0x24128086 chip=0x24128086 
> rev=0x02 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = '82801AA 8xx Chipset USB Controllers'
>     class      = serial bus
>     subclass   = USB
> none0 at pci0:0:31:3:    class=0x0c0500 card=0x24138086 chip=0x24138086 
> rev=0x02 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = '82801AA 8xx Chipset SMBus Controller'
>     class      = serial bus
>     subclass   = SMBus
> pcm0 at pci0:0:31:5:    class=0x040100 card=0x1249103c chip=0x24158086 
> rev=0x02 hdr=0x00
>     vendor     = 'Intel Corporation'
>     device     = 'Aureal (AD1881 SOUNDMAX) Placa Me Asaki P3-141 
> (Intel 82801DBM SM/BUS Controller 24C3)'
>     class      = multimedia
>     subclass   = audio
> vgapci0 at pci0:2:0:0:    class=0x030000 card=0x00000000 chip=0x025310de 
> rev=0xa3 hdr=0x00
>     vendor     = 'Nvidia Corp'
>     device     = 'Geforce4 TI 4200 128 Mo (NVIDIA Corporation)'
>     class      = display
>     subclass   = VGA
> xl0 at pci0:1:4:0:    class=0x020000 card=0x1246103c chip=0x920010b7 
> rev=0x78 hdr=0x00
>     vendor     = '3COM Corp, Networking Division'
>     device     = 'Fast EtherLink for PC Management NIC (3C905 CX-TXM)'
>     class      = network
>     subclass   = ethernet
>
> ------------------xorg.conf---------------------------
>
> # Xorg.conf file generated for PC-BSD
>
> Section "ServerLayout"
>     Identifier     "XFree86 Configured"
>     Screen      0  "Screen0" 0 0
>     InputDevice    "Mouse0" "CorePointer"
>     InputDevice    "Keyboard0" "CoreKeyboard"
> EndSection
>
> Section "ServerFlags"
>         Option "AutoAddDevices" "False"
>         Option "AllowEmptyInput" "Off"
> EndSection
>
> Section "Files"
>     ModulePath      "/usr/local/lib/xorg/modules"
>     FontPath        "/Programs/fonts/"
>     FontPath        "/usr/local/lib/X11/fonts/cyrillic/"
>     FontPath        "/usr/local/lib/X11/fonts/TrueType/"
>     FontPath        "/usr/local/lib/X11/fonts/webfonts/"
>     FontPath        "/usr/local/lib/X11/fonts/misc/"
>     FontPath        "/usr/local/lib/X11/fonts/TTF/"
>     FontPath        "/usr/local/lib/X11/fonts/Type1/"
>     FontPath        "/usr/local/lib/X11/fonts/CID/"
>     FontPath        "/usr/local/lib/X11/fonts/75dpi/"
>     FontPath        "/usr/local/lib/X11/fonts/100dpi/"
>     FontPath        "/usr/local/lib/X11/fonts/dejavu/"
>     FontPath        "/usr/local/lib/X11/fonts/local/"
> EndSection
>
> Section "Module"
>     Load           "ddc"
>     Load           "dbe"
>     Load           "extmod"
>     Load       "glx"
>     Load           "xtrap"
>     Load           "freetype"
> EndSection
>
> Section "InputDevice"
>     Identifier     "Keyboard0"
>     Driver         "keyboard"
>     Option         "XkbModel" "pc105"
>     Option         "XkbLayout" "us"
>     Option         "XkbVariant" ""
> EndSection
>
> Section "InputDevice"
>     Identifier     "Mouse0"
>     Driver         "mouse"
>     Option         "Protocol" "auto"
>     Option         "Device" "/dev/sysmouse"
>     Option         "Buttons" "6"
>     Option         "ZAxisMapping" "4 5"
>     Option         "Emulate3Buttons"
> EndSection
>
> Section "Extensions"
>     Option    "Composite" "Enable"
> EndSection
>
> Section "Monitor"
>     Identifier     "Monitor0"
>     VendorName     "Monitor Vendor"
>     ModelName      "Monitor Model"
>    
>     HorizSync    30.0-70.0
>     VertRefresh  48.0-120.0
> EndSection
>
>
> Section "Device"
>     Identifier      "Card0"
>     Screen           0
> #    Option         "AllowGLXWithComposite" "true"
> #    Option         "RenderAccel" "true"
> #    Option         "AddARGBGLXVisuals" "true"
> #    Option         "UseEvents" "false"
> #    Option         "TripleBuffer" "1"
> #    Option         "DamageEvents" "1"
> #    Option         "BackingStore" "1"
> #    Option         "PixmapCacheSize" "70000"
> #    Option         "OnDemandVBlankInterrupts" "true"
> #    Option         "XAANoOffscreenPixmaps" "true"
>     Option         "NoLogo" "True"
>     Driver         "nvidia"
>     VendorName     "nVidia Corporation"
>     BusID      "PCI:2:0:0"
> EndSection
>
>
> Section "Screen"
>     Identifier     "Screen0"
>     Device         "Card0"
>     Monitor        "Monitor0"
>     DefaultDepth   24
>     SubSection     "Display"
>         Depth      24
>         Modes      "1280x1024"
>     EndSubSection
> EndSection
>
> ------------------RC File-----------------------------
>
> background_dhclient="YES"
> hostname="pcbsd"
> compat5x_enable="YES"
> sshd_enable="YES"
> usbd_enable="YES"
> devd_enable="YES"
> devfs_system_ruleset="devfsrules_common"
> ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/kde4/lib 
> /usr/local/lib/compat/pkg"
>
> # Enable console mouse
> moused_type="auto"
> moused_enable="YES"
>
> # Enable the pcbsd startup / shutdown scripts
> pcbsdinit_enable="YES"
>  
> #Enable samba server
> samba_enable="YES"
> winbindd_enable="YES"
>  
> # Disable LPD 
> lpd_enable="NO"
>  
> # Enable CUPS
> cupsd_enable="YES"
> linux_enable="YES"
>  
> # FSCK Enhancements
> fsck_y_enable="YES"
> background_fsck="NO"
>  
> # tmpmfs Flags
> tmpmfs="YES"
> tmpsize="800m"
> tmpmfs_flags="-S"
> clear_tmp="YES"
>  
> # Denyhosts Startup
> denyhosts_enable="YES"
>
> # powerd: adaptive speed while on AC power, adaptive while on battery 
> power
> # WARNING: May cause crashes with nvidia driver
> #powerd_enable="YES"
> #powerd_flags="-a adaptive -b adaptive" # set CPU frequency
>
> # enable HAL / DBUS
> dbus_enable="YES"
> polkitd_enable="YES"
> hald_enable="YES"
>
> # Enables support for HPLIP
> hpiod_enable="NO"
> hpssd_enable="NO"
>
> # Enable the firewall
> pf_rules="/etc/pf.conf"
> pf_enable="YES"
> pf_flags=""
>
> # Enable ipfw and open it by default since we have PF
> firewall_enable="YES"
> firewall_type="open"
>
> # Enable sound-support
> snddetect_enable="YES"
> mixer_enable="YES"
>
> # Enable avahi_daemon
> avahi_daemon_enable="YES"
>
> # Run the port jail
> portjail_enable="YES"
>
> # Added for sound support in the portjail, access to /dev/random, 
> /dev/null, etc.
> jail_pcbsd_devfs_enable="YES"
>
> # Start the swapmonitor
> swapmonitor_enable="YES"
>
> # Enable IPV6 support
> ipv6_enable="YES"
>
> warden_enable="YES"
> ntpd_enable="YES"
> # Auto-Enabled NICs from pc-sysinstall
> ifconfig_xl0="DHCP"
> hostname="pcbsd-4559"
>
> ------------------Loader File-------------------------
>
> # Kernel Options
> kern.ipc.shmseg=1024
> kern.ipc.shmmni=1024
>
> # Enable the splash screen
> vesa_load="YES"
> splash_pcx_load="YES"
> bitmap_load="YES"
> bitmap_name="/boot/loading-screen.pcx"
>
> # Load Wireless Support
> if_ipw_load="YES"
> if_iwi_load="YES"
> if_wpi_load="YES"
> legal.intel_ipw.license_ack=1
> legal.intel_iwi.license_ack=1
> legal.intel_wpi.license_ack=1
>
> # Load mmc card-reader support
> mmc_load="YES"
> mmcsd_load="YES"
> sdhci_load="YES"
>
> # Load support for scd
> scd_load="YES"
>
> # Load sound-support
> sound_load="YES"
> snd_uaudio_load="YES"
>
> # Load geom support
> geom_journal_load="YES"
> geom_uzip_load="YES"
> geom_mirror_load="YES"
> geom_eli_load="YES"
>
> # Load File-System Support
> libiconv_load="YES"
> libmchain_load="YES"
> cd9660_iconv_load="YES"
> msdosfs_iconv_load="YES"
> ntfs_load="YES"
> ntfs_iconv_load="YES"
> udf_load="YES"
> udf_iconv_load="YES"
> zfs_load="YES"
> sem_load="YES"
> nvidia_load="YES"
>
> ------------------Free Space--------------------------
>
> Filesystem         1M-blocks Used Avail Capacity  Mounted on
> /dev/label/rootfs0      1978  370  1449    20%    /
> devfs                      0    0     0   100%    /dev
> /dev/label/var0          989   47   862     5%    /var
> /dev/label/usr0        24414 8834 13626    39%    /usr
> procfs                     0    0     0   100%    /proc
> linprocfs                  0    0     0   100%    /compat/linux/proc
> /dev/md0                 771    0   709     0%    /tmp
> /tmp                     771    0   709     0%    /usr/jails/portjail/tmp
> /usr/home              24414 8834 13626    39%    
> /usr/jails/portjail/usr/home
> devfs                      0    0     0   100%    /usr/jails/portjail/dev
> procfs                     0    0     0   100%    /usr/jails/portjail/proc
>
> ------------------System Processes--------------------
>
> last pid:  3924;  load averages:  2.36,  1.29,  0.62  up 0+00:10:06    
> 16:03:42
> 142 processes: 1 running, 141 sleeping
>
> Mem: 255M Active, 122M Inact, 80M Wired, 11M Cache, 59M Buf, 13M Free
> Swap: 1022M Total, 1022M Free
>
>
>   PID USERNAME    THR PRI NICE   SIZE    RES STATE    TIME   WCPU COMMAND
>  1903 root          1  57    0 77992K 59420K select   0:19 13.77% Xorg
>  3833 root          1  53    0 63128K 23040K select   0:04 13.28% kdeinit4
>  3347 IR            1  50    0   100M 43240K select   0:19  9.67% kdeinit4
>  3894 root          1  59    0 65260K 23900K select   0:01  8.59% knotify4
>  3804 root          2  76    0 77600K 36496K select   0:03  6.69% 
> kcmshell4
>  3914 root          1  76    0  3624K  1144K piperd   0:00  6.69% sh
>  3858 root          1  44    0 39820K 16932K select   0:00  3.08% kdeinit4
>  3830 root          1  44    0 40816K 18524K select   0:00  2.78% kdeinit4
>  3828 root          1  52    0 38692K 14980K select   0:00  2.78% kdeinit4
>  3826 root          1  44    0  3500K  1540K select   0:00  1.86% 
> dbus-daemon
>  3373 IR            2  76    0   264M 50196K select   0:04  0.29% kwin
>  3732 IR            1  44    0 81580K 39544K select   0:03  0.29% 
> systemsettings
>  1529 messagebus    1  44    0  3500K  1860K select   0:01  0.29% 
> dbus-daemon
>  3395 IR            2  44    0   347M   107M ucond    0:20  0.00% kdeinit4
>  3370 IR            4  49    0   116M 39496K ucond    0:05  0.00% knotify4
>  3456 IR            1  44    0   261M 52508K select   0:02  0.00% kdeinit4
>  3773 IR            2  76    0 72068K 29560K select   0:01  0.00% kdesu
>  3393 IR            1  44    0 96872K 36584K select   0:01  0.00% kdeinit4
>
>
>
>
>
> 2.  Lshal output (from computer w/ edited /etc/fstab)
>      i.e., the computer that can mount fd0 in dolphin-admin
>      when /etc/fstab is modified.  (Same computer that
>       will not mount fd0 when /etc/fstab is not modified.)
>
>
> Dumping 49 device(s) from the Global Device List:
> -------------------------------------------------
> udi = '/org/freedesktop/Hal/devices/computer'
>   info.callouts.add = {'hal-storage-cleanup-all-mountpoints'} (string 
> list)
>   info.interfaces = 
> {'org.freedesktop.Hal.Device.SystemPowerManagement'} (string list)
>   info.product = 'Computer'  (string)
>   info.subsystem = 'unknown'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/computer'  (string)
>   org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames = 
> {'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '', 
> 'enable_power_save'} (string list)
>   org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths = 
> {'hal-system-power-suspend', 'hal-system-power-suspend-hybrid', 
> 'hal-system-power-hibernate', 'hal-system-power-shutdown', 
> 'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string 
> list)
>   org.freedesktop.Hal.Device.SystemPowerManagement.method_names = 
> {'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot', 
> 'SetPowerSave'} (string list)
>   org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = 
> {'i', 'i', '', '', '', 'b'} (string list)
>   org.freedesktop.Hal.version = '0.5.13'  (string)
>   org.freedesktop.Hal.version.major = 0  (0x0)  (int)
>   org.freedesktop.Hal.version.micro = 13  (0xd)  (int)
>   org.freedesktop.Hal.version.minor = 5  (0x5)  (int)
>   power_management.can_hibernate = true  (bool)
>   power_management.can_suspend = true  (bool)
>   power_management.can_suspend_to_disk = true  (bool)
>   power_management.can_suspend_to_ram = true  (bool)
>   power_management.is_powersave_set = false  (bool)
>   power_management.type = 'acpi'  (string)
>   system.chassis.manufacturer = 'Hewlett-Packard'  (string)
>   system.chassis.type = 'Mini Tower'  (string)
>   system.firmware.release_date = '12/05/2001'  (string)
>   system.firmware.vendor = 'Phoenix Technologies Ltd.'  (string)
>   system.firmware.version = 'IP.01.08US'  (string)
>   system.formfactor = 'desktop'  (string)
>   system.hardware.product = 'HP Vectra'  (string)
>   system.hardware.serial = 'US13705225'  (string)
>   system.hardware.uuid = '8DEE53C1-A813-11D5-83E8-0A81F5B8CA22'  (string)
>   system.hardware.vendor = 'Hewlett-Packard'  (string)
>   system.hardware.version = 'VL400'  (string)
>   system.kernel.machine = 'i386'  (string)
>   system.kernel.name <http://system.kernel.name> = 'FreeBSD'  (string)
>   system.kernel.version = '8.0-RELEASE-p1'  (string)
>   system.product = 'HP Vectra VL400'  (string)
>
> udi = '/org/freedesktop/Hal/devices/acpi_button_0'
>   button.type = 'power'  (string)
>   freebsd.driver = 'acpi_button'  (string)
>   freebsd.unit = 0  (0x0)  (int)
>   info.capabilities = {'button'} (string list)
>   info.category = 'button'  (string)
>   info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>   info.product = 'Power Button'  (string)
>   info.subsystem = 'platform'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/acpi_button_0'  (string)
>   platform.id <http://platform.id> = 'acpi_button.0'  (string)
>   pnp.description = 'ACPI power button device'  (string)
>   pnp.id <http://pnp.id> = 'PNP0C0C'  (string)
>
> udi = '/org/freedesktop/Hal/devices/cpu_0'
>   freebsd.driver = 'cpu'  (string)
>   freebsd.unit = 0  (0x0)  (int)
>   info.capabilities = {'processor'} (string list)
>   info.category = 'processor'  (string)
>   info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>   info.product = 'Intel Pentium III'  (string)
>   info.subsystem = 'platform'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/cpu_0'  (string)
>   platform.id <http://platform.id> = 'cpu.0'  (string)
>   processor.can_throttle = false  (bool)
>   processor.maximum_speed = 996  (0x3e4)  (int)
>   processor.number = 0  (0x0)  (int)
>
> udi = '/org/freedesktop/Hal/devices/fdc_0'
>   freebsd.driver = 'fdc'  (string)
>   freebsd.unit = 0  (0x0)  (int)
>   info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>   info.product = 'Enhanced floppy controller'  (string)
>   info.subsystem = 'platform'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/fdc_0'  (string)
>   platform.id <http://platform.id> = 'fdc.0'  (string)
>   pnp.description = 'PC standard floppy disk controller'  (string)
>   pnp.id <http://pnp.id> = 'PNP0700'  (string)
>
> udi = '/org/freedesktop/Hal/devices/storage_model_1440_KB_3_5__drive'
>   block.device = '/dev/fd0'  (string)
>   block.is_volume = false  (bool)
>   block.major = 0  (0x0)  (int)
>   block.minor = 83  (0x53)  (int)
>   block.storage_device = 
> '/org/freedesktop/Hal/devices/storage_model_1440_KB_3_5__drive'  (string)
>   freebsd.device_file = '/dev/fd0'  (string)
>   freebsd.driver = 'fd'  (string)
>   freebsd.unit = 0  (0x0)  (int)
>   info.addons = {'hald-addon-storage'} (string list)
>   info.capabilities = {'block', 'storage'} (string list)
>   info.category = 'storage'  (string)
>   info.interfaces = {'org.freedesktop.Hal.Device.Volume', 
> 'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
>   info.parent = '/org/freedesktop/Hal/devices/fdc_0'  (string)
>   info.product = '1440-KB 3.5" drive'  (string)
>   info.subsystem = 'block'  (string)
>   info.udi = 
> '/org/freedesktop/Hal/devices/storage_model_1440_KB_3_5__drive'  (string)
>   org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point 
> fstype extra_options', 'extra_options', 'extra_options'} (string list)
>   org.freedesktop.Hal.Device.Volume.method_execpaths = 
> {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} 
> (string list)
>   org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 
> 'Unmount', 'Eject'} (string list)
>   org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 
> 'as'} (string list)
>   storage.automount_enabled_hint = true  (bool)
>   storage.bus = 'platform'  (string)
>   storage.drive_type = 'floppy'  (string)
>   storage.hotpluggable = false  (bool)
>   storage.media_check_enabled = false  (bool)
>   storage.model = '1440-KB 3.5" drive'  (string)
>   storage.no_partitions_hint = true  (bool)
>   storage.originating_device = ''  (string)
>   storage.removable = true  (bool)
>   storage.removable.support_async_notification = false  (bool)
>   storage.requires_eject = false  (bool)
>   storage.vendor = ''  (string)
>   volume.mount.valid_options = {'ro', 'noexec', 'noatime'} (string list)
>
> udi = '/org/freedesktop/Hal/devices/atkbdc_0'
>   freebsd.driver = 'atkbdc'  (string)
>   freebsd.unit = 0  (0x0)  (int)
>   info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>   info.product = 'Keyboard controller (i8042)'  (string)
>   info.subsystem = 'platform'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/atkbdc_0'  (string)
>   platform.id <http://platform.id> = 'atkbdc.0'  (string)
>   pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)'  
> (string)
>   pnp.id <http://pnp.id> = 'PNP0303'  (string)
>
> udi = '/org/freedesktop/Hal/devices/atkbd_0'
>   freebsd.device_file = '/dev/atkbd0'  (string)
>   freebsd.driver = 'atkbd'  (string)
>   freebsd.unit = 0  (0x0)  (int)
>   info.capabilities = {'input', 'input.keyboard'} (string list)
>   info.category = 'input.keyboard'  (string)
>   info.parent = '/org/freedesktop/Hal/devices/atkbdc_0'  (string)
>   info.product = 'AT Keyboard'  (string)
>   info.subsystem = 'platform'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/atkbd_0'  (string)
>   input.device = ''  (string)
>   input.x11_driver = 'kbd'  (string)
>   platform.id <http://platform.id> = 'atkbd.0'  (string)
>
> udi = '/org/freedesktop/Hal/devices/psm_0'
>   freebsd.device_file = '/dev/psm0'  (string)
>   freebsd.driver = 'psm'  (string)
>   freebsd.unit = 0  (0x0)  (int)
>   info.addons = {'hald-addon-mouse-sysmouse'} (string list)
>   info.capabilities = {'input', 'input.mouse'} (string list)
>   info.category = 'input.mouse'  (string)
>   info.parent = '/org/freedesktop/Hal/devices/atkbdc_0'  (string)
>   info.product = 'PS/2 Mouse'  (string)
>   info.subsystem = 'platform'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/psm_0'  (string)
>   input.device = '/dev/sysmouse'  (string)
>   input.x11_driver = 'mouse'  (string)
>   platform.id <http://platform.id> = 'psm.0'  (string)
>
> udi = '/org/freedesktop/Hal/devices/pci_8086_1130'
>   freebsd.driver = 'hostb'  (string)
>   freebsd.unit = 0  (0x0)  (int)
>   info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>   info.product = '82815 815 Chipset Host Bridge and Memory Controller 
> Hub'  (string)
>   info.subsystem = 'pci'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/pci_8086_1130'  (string)
>   info.vendor = 'Intel Corporation'  (string)
>   pci.device_class = 6  (0x6)  (int)
>   pci.device_protocol = 0  (0x0)  (int)
>   pci.device_subclass = 0  (0x0)  (int)
>   pci.freebsd.bus = 0  (0x0)  (int)
>   pci.freebsd.device = 0  (0x0)  (int)
>   pci.freebsd.function = 0  (0x0)  (int)
>   pci.freebsd.secondary_bus = 0  (0x0)  (int)
>   pci.product = '82815 815 Chipset Host Bridge and Memory Controller 
> Hub'  (string)
>   pci.product_id = 4400  (0x1130)  (int)
>   pci.subsys_product_id = 4400  (0x1130)  (int)
>   pci.subsys_vendor = 'Intel Corporation'  (string)
>   pci.subsys_vendor_id = 32902  (0x8086)  (int)
>   pci.vendor = 'Intel Corporation'  (string)
>   pci.vendor_id = 32902  (0x8086)  (int)
>
> udi = '/org/freedesktop/Hal/devices/pci_8086_1131'
>   freebsd.driver = 'pcib'  (string)
>   freebsd.unit = 1  (0x1)  (int)
>   info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>   info.product = '82815 815 Chipset AGP Bridge'  (string)
>   info.subsystem = 'pci'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/pci_8086_1131'  (string)
>   info.vendor = 'Intel Corporation'  (string)
>   pci.device_class = 6  (0x6)  (int)
>   pci.device_protocol = 0  (0x0)  (int)
>   pci.device_subclass = 4  (0x4)  (int)
>   pci.freebsd.bus = 0  (0x0)  (int)
>   pci.freebsd.device = 1  (0x1)  (int)
>   pci.freebsd.function = 0  (0x0)  (int)
>   pci.freebsd.secondary_bus = 2  (0x2)  (int)
>   pci.product = '82815 815 Chipset AGP Bridge'  (string)
>   pci.product_id = 4401  (0x1131)  (int)
>   pci.subsys_product_id = 0  (0x0)  (int)
>   pci.subsys_vendor_id = 0  (0x0)  (int)
>   pci.vendor = 'Intel Corporation'  (string)
>   pci.vendor_id = 32902  (0x8086)  (int)
>
> udi = '/org/freedesktop/Hal/devices/pci_10de_0253'
>   freebsd.driver = 'vgapci'  (string)
>   freebsd.unit = 0  (0x0)  (int)
>   info.parent = '/org/freedesktop/Hal/devices/pci_8086_1131'  (string)
>   info.product = 'NV25 [GeForce4 Ti 4200]'  (string)
>   info.subsystem = 'pci'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/pci_10de_0253'  (string)
>   info.vendor = 'nVidia Corporation'  (string)
>   pci.device_class = 3  (0x3)  (int)
>   pci.device_protocol = 0  (0x0)  (int)
>   pci.device_subclass = 0  (0x0)  (int)
>   pci.freebsd.bus = 2  (0x2)  (int)
>   pci.freebsd.device = 0  (0x0)  (int)
>   pci.freebsd.function = 0  (0x0)  (int)
>   pci.freebsd.secondary_bus = 0  (0x0)  (int)
>   pci.product = 'NV25 [GeForce4 Ti 4200]'  (string)
>   pci.product_id = 595  (0x253)  (int)
>   pci.subsys_product_id = 0  (0x0)  (int)
>   pci.subsys_vendor_id = 0  (0x0)  (int)
>   pci.vendor = 'nVidia Corporation'  (string)
>   pci.vendor_id = 4318  (0x10de)  (int)
>
> udi = '/org/freedesktop/Hal/devices/nvidia_0'
>   freebsd.device_file = '/dev/nvidia0'  (string)
>   freebsd.driver = 'nvidia'  (string)
>   freebsd.unit = 0  (0x0)  (int)
>   info.parent = '/org/freedesktop/Hal/devices/pci_10de_0253'  (string)
>   info.product = 'GeForce4 Ti 4200'  (string)
>   info.subsystem = 'platform'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/nvidia_0'  (string)
>   platform.id <http://platform.id> = 'nvidia.0'  (string)
>
> udi = '/org/freedesktop/Hal/devices/nvidia_0_drm_nvidia_card0'
>   drm.dri_library = 'nvidia'  (string)
>   drm.version = 'NVIDIA FreeBSD x86 Kernel Module  96.43.13  Thu Jun 
> 25 17:53:46 PDT 2009'  (string)
>   freebsd.device_file = '/dev/nvidia0'  (string)
>   info.capabilities = {'drm'} (string list)
>   info.category = 'drm'  (string)
>   info.parent = '/org/freedesktop/Hal/devices/nvidia_0'  (string)
>   info.product = 'Direct Rendering Manager Device'  (string)
>   info.subsystem = 'drm'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/nvidia_0_drm_nvidia_card0'  
> (string)
>   info.vendor = 'nVidia Corporation'  (string)
>
> udi = '/org/freedesktop/Hal/devices/pci_8086_2418'
>   freebsd.driver = 'pcib'  (string)
>   freebsd.unit = 2  (0x2)  (int)
>   info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>   info.product = '82801AA PCI Bridge'  (string)
>   info.subsystem = 'pci'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/pci_8086_2418'  (string)
>   info.vendor = 'Intel Corporation'  (string)
>   pci.device_class = 6  (0x6)  (int)
>   pci.device_protocol = 0  (0x0)  (int)
>   pci.device_subclass = 4  (0x4)  (int)
>   pci.freebsd.bus = 0  (0x0)  (int)
>   pci.freebsd.device = 30  (0x1e)  (int)
>   pci.freebsd.function = 0  (0x0)  (int)
>   pci.freebsd.secondary_bus = 1  (0x1)  (int)
>   pci.product = '82801AA PCI Bridge'  (string)
>   pci.product_id = 9240  (0x2418)  (int)
>   pci.subsys_product_id = 0  (0x0)  (int)
>   pci.subsys_vendor_id = 0  (0x0)  (int)
>   pci.vendor = 'Intel Corporation'  (string)
>   pci.vendor_id = 32902  (0x8086)  (int)
>
> udi = '/org/freedesktop/Hal/devices/pci_10b7_9200'
>   freebsd.driver = 'xl'  (string)
>   freebsd.unit = 0  (0x0)  (int)
>   info.parent = '/org/freedesktop/Hal/devices/pci_8086_2418'  (string)
>   info.product = '3c905C-TX/TX-M [Tornado]'  (string)
>   info.subsystem = 'pci'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/pci_10b7_9200'  (string)
>   info.vendor = '3Com Corporation'  (string)
>   pci.device_class = 2  (0x2)  (int)
>   pci.device_protocol = 0  (0x0)  (int)
>   pci.device_subclass = 0  (0x0)  (int)
>   pci.freebsd.bus = 1  (0x1)  (int)
>   pci.freebsd.device = 4  (0x4)  (int)
>   pci.freebsd.function = 0  (0x0)  (int)
>   pci.freebsd.secondary_bus = 0  (0x0)  (int)
>   pci.product = '3c905C-TX/TX-M [Tornado]'  (string)
>   pci.product_id = 37376  (0x9200)  (int)
>   pci.subsys_product_id = 4678  (0x1246)  (int)
>   pci.subsys_vendor = 'Hewlett-Packard Company'  (string)
>   pci.subsys_vendor_id = 4156  (0x103c)  (int)
>   pci.vendor = '3Com Corporation'  (string)
>   pci.vendor_id = 4279  (0x10b7)  (int)
>
> udi = '/org/freedesktop/Hal/devices/net_00_04_75_50_68_48'
>   info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list)
>   info.category = 'net.80203'  (string)
>   info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list)
>   info.parent = '/org/freedesktop/Hal/devices/pci_10b7_9200'  (string)
>   info.product = 'Networking Interface'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/net_00_04_75_50_68_48'  
> (string)
>   net.80203.link = true  (bool)
>   net.80203.mac_address = 19148073032  (0x475506848)  (uint64)
>   net.80203.rate = 100000000  (0x5f5e100)  (uint64)
>   net.address = '00:04:75:50:68:48'  (string)
>   net.arp_proto_hw_id = 1  (0x1)  (int)
>   net.freebsd.ifindex = 1  (0x1)  (int)
>   net.interface = 'xl0'  (string)
>   net.interface_up = true  (bool)
>   net.media = 'Ethernet autoselect (100baseTX <full-duplex>)'  (string)
>   net.originating_device = 
> '/org/freedesktop/Hal/devices/pci_10b7_9200'  (string)
>   net.physical_device = '/org/freedesktop/Hal/devices/pci_10b7_9200'  
> (string)
>   org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 
> 'enable'} (string list)
>   org.freedesktop.Hal.Device.WakeOnLan.method_execpaths = 
> {'hal-system-wol-supported', 'hal-system-wol-enabled', 
> 'hal-system-wol-enable'} (string list)
>   org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported', 
> 'GetEnabled', 'SetEnabled'} (string list)
>   org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 
> 'b'} (string list)
>
> udi = '/org/freedesktop/Hal/devices/pci_8086_2410'
>   freebsd.driver = 'isab'  (string)
>   freebsd.unit = 0  (0x0)  (int)
>   info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>   info.product = '82801AA ISA Bridge (LPC)'  (string)
>   info.subsystem = 'pci'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/pci_8086_2410'  (string)
>   info.vendor = 'Intel Corporation'  (string)
>   pci.device_class = 6  (0x6)  (int)
>   pci.device_protocol = 0  (0x0)  (int)
>   pci.device_subclass = 1  (0x1)  (int)
>   pci.freebsd.bus = 0  (0x0)  (int)
>   pci.freebsd.device = 31  (0x1f)  (int)
>   pci.freebsd.function = 0  (0x0)  (int)
>   pci.freebsd.secondary_bus = 0  (0x0)  (int)
>   pci.product = '82801AA ISA Bridge (LPC)'  (string)
>   pci.product_id = 9232  (0x2410)  (int)
>   pci.subsys_product_id = 0  (0x0)  (int)
>   pci.subsys_vendor_id = 0  (0x0)  (int)
>   pci.vendor = 'Intel Corporation'  (string)
>   pci.vendor_id = 32902  (0x8086)  (int)
>
> udi = '/org/freedesktop/Hal/devices/pci_8086_2411'
>   freebsd.driver = 'atapci'  (string)
>   freebsd.unit = 0  (0x0)  (int)
>   info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>   info.product = '82801AA IDE Controller'  (string)
>   info.subsystem = 'pci'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/pci_8086_2411'  (string)
>   info.vendor = 'Intel Corporation'  (string)
>   pci.device_class = 1  (0x1)  (int)
>   pci.device_protocol = 128  (0x80)  (int)
>   pci.device_subclass = 1  (0x1)  (int)
>   pci.freebsd.bus = 0  (0x0)  (int)
>   pci.freebsd.device = 31  (0x1f)  (int)
>   pci.freebsd.function = 1  (0x1)  (int)
>   pci.freebsd.secondary_bus = 0  (0x0)  (int)
>   pci.product = '82801AA IDE Controller'  (string)
>   pci.product_id = 9233  (0x2411)  (int)
>   pci.subsys_product_id = 9233  (0x2411)  (int)
>   pci.subsys_vendor = 'Intel Corporation'  (string)
>   pci.subsys_vendor_id = 32902  (0x8086)  (int)
>   pci.vendor = 'Intel Corporation'  (string)
>   pci.vendor_id = 32902  (0x8086)  (int)
>
> udi = '/org/freedesktop/Hal/devices/ide_host_0'
>   freebsd.driver = 'ata'  (string)
>   freebsd.unit = 0  (0x0)  (int)
>   ide_host.number = 0  (0x0)  (int)
>   info.parent = '/org/freedesktop/Hal/devices/pci_8086_2411'  (string)
>   info.product = 'ATA channel 0'  (string)
>   info.subsystem = 'ide_host'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/ide_host_0'  (string)
>
> udi = '/org/freedesktop/Hal/devices/ide_host_0_scsi_host'
>   info.parent = '/org/freedesktop/Hal/devices/ide_host_0'  (string)
>   info.product = 'SCSI Host Adapter'  (string)
>   info.subsystem = 'scsi_host'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/ide_host_0_scsi_host'  (string)
>   scsi_host.host = 0  (0x0)  (int)
>
> udi = '/org/freedesktop/Hal/devices/ide_0_0'
>   ide.channel = 0  (0x0)  (int)
>   ide.host = 0  (0x0)  (int)
>   info.parent = '/org/freedesktop/Hal/devices/ide_host_0'  (string)
>   info.product = 'IDE Device (Master)'  (string)
>   info.subsystem = 'ide'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/ide_0_0'  (string)
>
> udi = '/org/freedesktop/Hal/devices/storage_serial_T3RF618C'
>   block.device = '/dev/ad0'  (string)
>   block.is_volume = false  (bool)
>   block.major = 0  (0x0)  (int)
>   block.minor = 85  (0x55)  (int)
>   block.storage_device = 
> '/org/freedesktop/Hal/devices/storage_serial_T3RF618C'  (string)
>   freebsd.device_file = '/dev/ad0'  (string)
>   freebsd.driver = 'ad'  (string)
>   freebsd.unit = 0  (0x0)  (int)
>   info.capabilities = {'block', 'storage'} (string list)
>   info.category = 'storage'  (string)
>   info.parent = '/org/freedesktop/Hal/devices/ide_0_0'  (string)
>   info.product = 'Maxtor 5T030H3'  (string)
>   info.subsystem = 'block'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/storage_serial_T3RF618C'  
> (string)
>   info.vendor = 'Maxtor'  (string)
>   storage.automount_enabled_hint = true  (bool)
>   storage.bus = 'ide'  (string)
>   storage.drive_type = 'disk'  (string)
>   storage.firmware_revision = 'TAH71DP0'  (string)
>   storage.hotpluggable = false  (bool)
>   storage.media_check_enabled = false  (bool)
>   storage.model = 'Maxtor 5T030H3'  (string)
>   storage.no_partitions_hint = false  (bool)
>   storage.originating_device = '/org/freedesktop/Hal/devices/ide_0_0'  
> (string)
>   storage.removable = false  (bool)
>   storage.removable.support_async_notification = false  (bool)
>   storage.requires_eject = false  (bool)
>   storage.serial = 'T3RF618C'  (string)
>   storage.vendor = 'Maxtor'  (string)
>
> udi = '/org/freedesktop/Hal/devices/volume_part2_size_30735548928'
>   block.device = '/dev/ad0s1'  (string)
>   block.is_volume = true  (bool)
>   block.major = 0  (0x0)  (int)
>   block.minor = 88  (0x58)  (int)
>   block.storage_device = 
> '/org/freedesktop/Hal/devices/storage_serial_T3RF618C'  (string)
>   info.capabilities = {'block', 'volume'} (string list)
>   info.category = 'volume'  (string)
>   info.parent = 
> '/org/freedesktop/Hal/devices/storage_serial_T3RF618C'  (string)
>   info.product = 'Volume'  (string)
>   info.subsystem = 'block'  (string)
>   info.udi = 
> '/org/freedesktop/Hal/devices/volume_part2_size_30735548928'  (string)
>   volume.block_size = 512  (0x200)  (uint64)
>   volume.fstype = ''  (string)
>   volume.fsusage = 'partitiontable'  (string)
>   volume.ignore = true  (bool)
>   volume.is_disc = false  (bool)
>   volume.is_mounted = false  (bool)
>   volume.is_mounted_read_only = false  (bool)
>   volume.is_partition = true  (bool)
>   volume.label = ''  (string)
>   volume.mount_point = ''  (string)
>   volume.num_blocks = 60030369  (0x393fda1)  (uint64)
>   volume.partition.media_size = 30735548928  (0x727fb4200)  (uint64)
>   volume.partition.number = 2  (0x2)  (int)
>   volume.partition.scheme = 'mbr'  (string)
>   volume.partition.start = 32256  (0x7e00)  (uint64)
>   volume.partition.type = '0x0'  (string)
>   volume.size = 30735548928  (0x727fb4200)  (uint64)
>   volume.uuid = ''  (string)
>
> udi = '/org/freedesktop/Hal/devices/volume_size_2147483648'
>   block.device = '/dev/ad0s1a'  (string)
>   block.is_volume = true  (bool)
>   block.major = 0  (0x0)  (int)
>   block.minor = 89  (0x59)  (int)
>   block.storage_device = 
> '/org/freedesktop/Hal/devices/storage_serial_T3RF618C'  (string)
>   info.capabilities = {'block', 'volume'} (string list)
>   info.category = 'volume'  (string)
>   info.parent = 
> '/org/freedesktop/Hal/devices/volume_part2_size_30735548928'  (string)
>   info.product = 'Volume'  (string)
>   info.subsystem = 'block'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/volume_size_2147483648'  
> (string)
>   volume.block_size = 512  (0x200)  (uint64)
>   volume.fstype = ''  (string)
>   volume.fsusage = 'partitiontable'  (string)
>   volume.ignore = true  (bool)
>   volume.is_disc = false  (bool)
>   volume.is_mounted = false  (bool)
>   volume.is_mounted_read_only = false  (bool)
>   volume.is_partition = false  (bool)
>   volume.label = ''  (string)
>   volume.mount_point = ''  (string)
>   volume.num_blocks = 4194304  (0x400000)  (uint64)
>   volume.size = 2147483648  (0x80000000)  (uint64)
>   volume.uuid = ''  (string)
>
> udi = '/org/freedesktop/Hal/devices/volume_size_2147483136'
>   block.device = '/dev/label/rootfs0'  (string)
>   block.is_volume = true  (bool)
>   block.major = 0  (0x0)  (int)
>   block.minor = 93  (0x5d)  (int)
>   block.storage_device = 
> '/org/freedesktop/Hal/devices/storage_serial_T3RF618C'  (string)
>   info.capabilities = {'block', 'volume'} (string list)
>   info.category = 'volume'  (string)
>   info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
>   info.parent = '/org/freedesktop/Hal/devices/volume_size_2147483648'  
> (string)
>   info.product = 'Volume (ufs)'  (string)
>   info.subsystem = 'block'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/volume_size_2147483136'  
> (string)
>   org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point 
> fstype extra_options', 'extra_options', 'extra_options'} (string list)
>   org.freedesktop.Hal.Device.Volume.method_execpaths = 
> {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} 
> (string list)
>   org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 
> 'Unmount', 'Eject'} (string list)
>   org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 
> 'as'} (string list)
>   volume.block_size = 512  (0x200)  (uint64)
>   volume.freebsd.ufsid = '4b4a170c304b7164'  (string)
>   volume.fstype = 'ufs'  (string)
>   volume.fsusage = 'filesystem'  (string)
>   volume.fsversion = '2'  (string)
>   volume.ignore = false  (bool)
>   volume.is_disc = false  (bool)
>   volume.is_mounted = true  (bool)
>   volume.is_mounted_read_only = false  (bool)
>   volume.is_partition = false  (bool)
>   volume.label = ''  (string)
>   volume.mount.valid_options = {'ro', 'noexec', 'noatime'} (string list)
>   volume.mount_point = '/'  (string)
>   volume.num_blocks = 4194303  (0x3fffff)  (uint64)
>   volume.size = 2147483136  (0x7ffffe00)  (uint64)
>   volume.uuid = ''  (string)
>
> udi = '/org/freedesktop/Hal/devices/volume_size_1071644672'
>   block.device = '/dev/ad0s1b'  (string)
>   block.is_volume = true  (bool)
>   block.major = 0  (0x0)  (int)
>   block.minor = 90  (0x5a)  (int)
>   block.storage_device = 
> '/org/freedesktop/Hal/devices/storage_serial_T3RF618C'  (string)
>   info.capabilities = {'block', 'volume'} (string list)
>   info.category = 'volume'  (string)
>   info.parent = 
> '/org/freedesktop/Hal/devices/volume_part2_size_30735548928'  (string)
>   info.product = 'Volume'  (string)
>   info.subsystem = 'block'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/volume_size_1071644672'  
> (string)
>   volume.block_size = 512  (0x200)  (uint64)
>   volume.fstype = ''  (string)
>   volume.fsusage = 'partitiontable'  (string)
>   volume.ignore = true  (bool)
>   volume.is_disc = false  (bool)
>   volume.is_mounted = false  (bool)
>   volume.is_mounted_read_only = false  (bool)
>   volume.is_partition = false  (bool)
>   volume.label = ''  (string)
>   volume.mount_point = ''  (string)
>   volume.num_blocks = 2093056  (0x1ff000)  (uint64)
>   volume.size = 1071644672  (0x3fe00000)  (uint64)
>   volume.uuid = ''  (string)
>
> udi = '/org/freedesktop/Hal/devices/volume_size_1071644160'
>   block.device = '/dev/label/swap0'  (string)
>   block.is_volume = true  (bool)
>   block.major = 0  (0x0)  (int)
>   block.minor = 95  (0x5f)  (int)
>   block.storage_device = 
> '/org/freedesktop/Hal/devices/storage_serial_T3RF618C'  (string)
>   info.capabilities = {'block', 'volume'} (string list)
>   info.category = 'volume'  (string)
>   info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
>   info.parent = '/org/freedesktop/Hal/devices/volume_size_1071644672'  
> (string)
>   info.product = 'Volume (ufs)'  (string)
>   info.subsystem = 'block'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/volume_size_1071644160'  
> (string)
>   org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point 
> fstype extra_options', 'extra_options', 'extra_options'} (string list)
>   org.freedesktop.Hal.Device.Volume.method_execpaths = 
> {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} 
> (string list)
>   org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 
> 'Unmount', 'Eject'} (string list)
>   org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 
> 'as'} (string list)
>   volume.block_size = 512  (0x200)  (uint64)
>   volume.fstype = 'ufs'  (string)
>   volume.fsusage = 'filesystem'  (string)
>   volume.fsversion = '2'  (string)
>   volume.ignore = false  (bool)
>   volume.is_disc = false  (bool)
>   volume.is_mounted = false  (bool)
>   volume.is_mounted_read_only = false  (bool)
>   volume.is_partition = false  (bool)
>   volume.label = ''  (string)
>   volume.mount.valid_options = {'ro', 'noexec', 'noatime'} (string list)
>   volume.mount_point = ''  (string)
>   volume.num_blocks = 2093055  (0x1fefff)  (uint64)
>   volume.size = 1071644160  (0x3fdffe00)  (uint64)
>   volume.uuid = ''  (string)
>
> udi = '/org/freedesktop/Hal/devices/volume_size_1073741824'
>   block.device = '/dev/ad0s1d'  (string)
>   block.is_volume = true  (bool)
>   block.major = 0  (0x0)  (int)
>   block.minor = 91  (0x5b)  (int)
>   block.storage_device = 
> '/org/freedesktop/Hal/devices/storage_serial_T3RF618C'  (string)
>   info.capabilities = {'block', 'volume'} (string list)
>   info.category = 'volume'  (string)
>   info.parent = 
> '/org/freedesktop/Hal/devices/volume_part2_size_30735548928'  (string)
>   info.product = 'Volume'  (string)
>   info.subsystem = 'block'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/volume_size_1073741824'  
> (string)
>   volume.block_size = 512  (0x200)  (uint64)
>   volume.fstype = ''  (string)
>   volume.fsusage = 'partitiontable'  (string)
>   volume.ignore = true  (bool)
>   volume.is_disc = false  (bool)
>   volume.is_mounted = false  (bool)
>   volume.is_mounted_read_only = false  (bool)
>   volume.is_partition = false  (bool)
>   volume.label = ''  (string)
>   volume.mount_point = ''  (string)
>   volume.num_blocks = 2097152  (0x200000)  (uint64)
>   volume.size = 1073741824  (0x40000000)  (uint64)
>   volume.uuid = ''  (string)
>
> udi = '/org/freedesktop/Hal/devices/volume_size_1073741312'
>   block.device = '/dev/label/var0'  (string)
>   block.is_volume = true  (bool)
>   block.major = 0  (0x0)  (int)
>   block.minor = 96  (0x60)  (int)
>   block.storage_device = 
> '/org/freedesktop/Hal/devices/storage_serial_T3RF618C'  (string)
>   info.capabilities = {'block', 'volume'} (string list)
>   info.category = 'volume'  (string)
>   info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
>   info.parent = '/org/freedesktop/Hal/devices/volume_size_1073741824'  
> (string)
>   info.product = 'Volume (ufs)'  (string)
>   info.subsystem = 'block'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/volume_size_1073741312'  
> (string)
>   org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point 
> fstype extra_options', 'extra_options', 'extra_options'} (string list)
>   org.freedesktop.Hal.Device.Volume.method_execpaths = 
> {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} 
> (string list)
>   org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 
> 'Unmount', 'Eject'} (string list)
>   org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 
> 'as'} (string list)
>   volume.block_size = 512  (0x200)  (uint64)
>   volume.freebsd.ufsid = '4b4a1714b7851771'  (string)
>   volume.fstype = 'ufs'  (string)
>   volume.fsusage = 'filesystem'  (string)
>   volume.fsversion = '2'  (string)
>   volume.ignore = false  (bool)
>   volume.is_disc = false  (bool)
>   volume.is_mounted = true  (bool)
>   volume.is_mounted_read_only = false  (bool)
>   volume.is_partition = false  (bool)
>   volume.label = ''  (string)
>   volume.mount.valid_options = {'ro', 'noexec', 'noatime'} (string list)
>   volume.mount_point = '/var'  (string)
>   volume.num_blocks = 2097151  (0x1fffff)  (uint64)
>   volume.size = 1073741312  (0x3ffffe00)  (uint64)
>   volume.uuid = ''  (string)
>
> udi = '/org/freedesktop/Hal/devices/volume_size_26436698112'
>   block.device = '/dev/ad0s1e'  (string)
>   block.is_volume = true  (bool)
>   block.major = 0  (0x0)  (int)
>   block.minor = 92  (0x5c)  (int)
>   block.storage_device = 
> '/org/freedesktop/Hal/devices/storage_serial_T3RF618C'  (string)
>   info.capabilities = {'block', 'volume'} (string list)
>   info.category = 'volume'  (string)
>   info.parent = 
> '/org/freedesktop/Hal/devices/volume_part2_size_30735548928'  (string)
>   info.product = 'Volume'  (string)
>   info.subsystem = 'block'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/volume_size_26436698112'  
> (string)
>   volume.block_size = 512  (0x200)  (uint64)
>   volume.fstype = ''  (string)
>   volume.fsusage = 'partitiontable'  (string)
>   volume.ignore = true  (bool)
>   volume.is_disc = false  (bool)
>   volume.is_mounted = false  (bool)
>   volume.is_mounted_read_only = false  (bool)
>   volume.is_partition = false  (bool)
>   volume.label = ''  (string)
>   volume.mount_point = ''  (string)
>   volume.num_blocks = 51634176  (0x313e000)  (uint64)
>   volume.size = 26436698112  (0x627c00000)  (uint64)
>   volume.uuid = ''  (string)
>
> udi = '/org/freedesktop/Hal/devices/volume_size_26436697600'
>   block.device = '/dev/label/usr0'  (string)
>   block.is_volume = true  (bool)
>   block.major = 0  (0x0)  (int)
>   block.minor = 98  (0x62)  (int)
>   block.storage_device = 
> '/org/freedesktop/Hal/devices/storage_serial_T3RF618C'  (string)
>   info.capabilities = {'block', 'volume'} (string list)
>   info.category = 'volume'  (string)
>   info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
>   info.parent = 
> '/org/freedesktop/Hal/devices/volume_size_26436698112'  (string)
>   info.product = 'Volume (ufs)'  (string)
>   info.subsystem = 'block'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/volume_size_26436697600'  
> (string)
>   org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point 
> fstype extra_options', 'extra_options', 'extra_options'} (string list)
>   org.freedesktop.Hal.Device.Volume.method_execpaths = 
> {'hal-storage-mount', 'hal-storage-unmount', 'hal-storage-eject'} 
> (string list)
>   org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 
> 'Unmount', 'Eject'} (string list)
>   org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 
> 'as'} (string list)
>   volume.block_size = 512  (0x200)  (uint64)
>   volume.freebsd.ufsid = '4b4a171bd70592cd'  (string)
>   volume.fstype = 'ufs'  (string)
>   volume.fsusage = 'filesystem'  (string)
>   volume.fsversion = '2'  (string)
>   volume.ignore = false  (bool)
>   volume.is_disc = false  (bool)
>   volume.is_mounted = true  (bool)
>   volume.is_mounted_read_only = false  (bool)
>   volume.is_partition = false  (bool)
>   volume.label = ''  (string)
>   volume.mount.valid_options = {'ro', 'noexec', 'noatime'} (string list)
>   volume.mount_point = '/usr'  (string)
>   volume.num_blocks = 51634175  (0x313dfff)  (uint64)
>   volume.size = 26436697600  (0x627bffe00)  (uint64)
>   volume.uuid = ''  (string)
>
> udi = '/org/freedesktop/Hal/devices/ide_host_1'
>   freebsd.driver = 'ata'  (string)
>   freebsd.unit = 1  (0x1)  (int)
>   ide_host.number = 1  (0x1)  (int)
>   info.parent = '/org/freedesktop/Hal/devices/pci_8086_2411'  (string)
>   info.product = 'ATA channel 1'  (string)
>   info.subsystem = 'ide_host'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/ide_host_1'  (string)
>
> udi = '/org/freedesktop/Hal/devices/ide_host_1_scsi_host'
>   info.parent = '/org/freedesktop/Hal/devices/ide_host_1'  (string)
>   info.product = 'SCSI Host Adapter'  (string)
>   info.subsystem = 'scsi_host'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/ide_host_1_scsi_host'  (string)
>   scsi_host.host = 1  (0x1)  (int)
>
> udi = 
> '/org/freedesktop/Hal/devices/ide_host_1_scsi_host_scsi_device_lun0_0'
>   info.parent = '/org/freedesktop/Hal/devices/ide_host_1_scsi_host'  
> (string)
>   info.product = 'SCSI Device'  (string)
>   info.subsystem = 'scsi'  (string)
>   info.udi = 
> '/org/freedesktop/Hal/devices/ide_host_1_scsi_host_scsi_device_lun0_0'  
> (string)
>   info.vendor = 'HP'  (string)
>   scsi.bus = 1  (0x1)  (int)
>   scsi.host = 1  (0x1)  (int)
>   scsi.lun = 0  (0x0)  (int)
>   scsi.model = 'DVD Writer 640c'  (string)
>   scsi.target = 1  (0x1)  (int)
>   scsi.type = 'cdrom'  (string)
>   scsi.vendor = 'HP'  (string)
>
> udi = '/org/freedesktop/Hal/devices/storage_model_DVD_Writer_640c'
>   block.device = '/dev/cd1'  (string)
>   block.freebsd.cam_path = '1,1,0'  (string)
>   block.is_volume = false  (bool)
>   block.major = 0  (0x0)  (int)
>   block.minor = 104  (0x68)  (int)
>   block.storage_device = 
> '/org/freedesktop/Hal/devices/storage_model_DVD_Writer_640c'  (string)
>   freebsd.device_file = '/dev/cd1'  (string)
>   freebsd.driver = 'cd'  (string)
>   freebsd.unit = 1  (0x1)  (int)
>   info.addons = {'hald-addon-storage'} (string list)
>   info.capabilities = {'block', 'storage', 'storage.cdrom'} (string list)
>   info.category = 'storage.cdrom'  (string)
>   info.interfaces = {'org.freedesktop.Hal.Device.Storage', 
> 'org.freedesktop.Hal.Device.Storage', 
> 'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
>   info.parent = 
> '/org/freedesktop/Hal/devices/ide_host_1_scsi_host_scsi_device_lun0_0'  
> (string)
>   info.product = 'DVD Writer 640c'  (string)
>   info.subsystem = 'block'  (string)
>   info.udi = 
> '/org/freedesktop/Hal/devices/storage_model_DVD_Writer_640c'  (string)
>   info.vendor = 'HP'  (string)
>   org.freedesktop.Hal.Device.Storage.method_argnames = 
> {'extra_options', 'extra_options'} (string list)
>   org.freedesktop.Hal.Device.Storage.method_execpaths = 
> {'hal-storage-eject', 'hal-storage-closetray'} (string list)
>   org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 
> 'CloseTray'} (string list)
>   org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} 
> (string list)
>   storage.automount_enabled_hint = true  (bool)
>   storage.bus = 'scsi'  (string)
>   storage.cdrom.bd <http://storage.cdrom.bd> = false  (bool)
>   storage.cdrom.bdr = false  (bool)
>   storage.cdrom.bdre = false  (bool)
>   storage.cdrom.cdr = true  (bool)
>   storage.cdrom.cdrw = true  (bool)
>   storage.cdrom.dvd = true  (bool)
>   storage.cdrom.dvdplusr = true  (bool)
>   storage.cdrom.dvdplusrdl = true  (bool)
>   storage.cdrom.dvdplusrw = true  (bool)
>   storage.cdrom.dvdplusrwdl = false  (bool)
>   storage.cdrom.dvdr = true  (bool)
>   storage.cdrom.dvdram = false  (bool)
>   storage.cdrom.dvdrw = false  (bool)
>   storage.cdrom.hddvd = false  (bool)
>   storage.cdrom.hddvdr = false  (bool)
>   storage.cdrom.hddvdrw = false  (bool)
>   storage.cdrom.read_speed = 7056  (0x1b90)  (int)
>   storage.cdrom.support_media_changed = false  (bool)
>   storage.cdrom.write_speed = 7056  (0x1b90)  (int)
>   storage.cdrom.write_speeds = {'7056', '5645', '4234', '2822', 
> '2117', '1411'} (string list)
>   storage.drive_type = 'cdrom'  (string)
>   storage.firmware_revision = 'CS30'  (string)
>   storage.hotpluggable = false  (bool)
>   storage.lun = 0  (0x0)  (int)
>   storage.media_check_enabled = true  (bool)
>   storage.model = 'DVD Writer 640c'  (string)
>   storage.no_partitions_hint = true  (bool)
>   storage.originating_device = 
> '/org/freedesktop/Hal/devices/ide_host_1_scsi_host_scsi_device_lun0_0'  
> (string)
>   storage.removable = true  (bool)
>   storage.removable.media_available = false  (bool)
>   storage.removable.support_async_notification = false  (bool)
>   storage.requires_eject = true  (bool)
>   storage.vendor = 'HP'  (string)
>
> udi = '/org/freedesktop/Hal/devices/ide_host_1_scsi_host_scsi_device_lun0'
>   info.parent = '/org/freedesktop/Hal/devices/ide_host_1_scsi_host'  
> (string)
>   info.product = 'SCSI Device'  (string)
>   info.subsystem = 'scsi'  (string)
>   info.udi = 
> '/org/freedesktop/Hal/devices/ide_host_1_scsi_host_scsi_device_lun0'  
> (string)
>   info.vendor = 'HITACHI'  (string)
>   scsi.bus = 1  (0x1)  (int)
>   scsi.host = 1  (0x1)  (int)
>   scsi.lun = 0  (0x0)  (int)
>   scsi.model = 'DVD-ROM GD-8000'  (string)
>   scsi.target = 0  (0x0)  (int)
>   scsi.type = 'cdrom'  (string)
>   scsi.vendor = 'HITACHI'  (string)
>
> udi = '/org/freedesktop/Hal/devices/storage_model_DVD_ROM_GD_8000'
>   block.device = '/dev/cd0'  (string)
>   block.freebsd.cam_path = '1,0,0'  (string)
>   block.is_volume = false  (bool)
>   block.major = 0  (0x0)  (int)
>   block.minor = 102  (0x66)  (int)
>   block.storage_device = 
> '/org/freedesktop/Hal/devices/storage_model_DVD_ROM_GD_8000'  (string)
>   freebsd.device_file = '/dev/cd0'  (string)
>   freebsd.driver = 'cd'  (string)
>   freebsd.unit = 0  (0x0)  (int)
>   info.addons = {'hald-addon-storage'} (string list)
>   info.capabilities = {'block', 'storage', 'storage.cdrom'} (string list)
>   info.category = 'storage.cdrom'  (string)
>   info.interfaces = {'org.freedesktop.Hal.Device.Storage', 
> 'org.freedesktop.Hal.Device.Storage', 
> 'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
>   info.parent = 
> '/org/freedesktop/Hal/devices/ide_host_1_scsi_host_scsi_device_lun0'  
> (string)
>   info.product = 'DVD-ROM GD-8000'  (string)
>   info.subsystem = 'block'  (string)
>   info.udi = 
> '/org/freedesktop/Hal/devices/storage_model_DVD_ROM_GD_8000'  (string)
>   info.vendor = 'HITACHI'  (string)
>   org.freedesktop.Hal.Device.Storage.method_argnames = 
> {'extra_options', 'extra_options'} (string list)
>   org.freedesktop.Hal.Device.Storage.method_execpaths = 
> {'hal-storage-eject', 'hal-storage-closetray'} (string list)
>   org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 
> 'CloseTray'} (string list)
>   org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'} 
> (string list)
>   storage.automount_enabled_hint = true  (bool)
>   storage.bus = 'scsi'  (string)
>   storage.cdrom.bd <http://storage.cdrom.bd> = false  (bool)
>   storage.cdrom.bdr = false  (bool)
>   storage.cdrom.bdre = false  (bool)
>   storage.cdrom.cdr = false  (bool)
>   storage.cdrom.cdrw = false  (bool)
>   storage.cdrom.dvd = true  (bool)
>   storage.cdrom.dvdplusr = false  (bool)
>   storage.cdrom.dvdplusrdl = false  (bool)
>   storage.cdrom.dvdplusrw = false  (bool)
>   storage.cdrom.dvdplusrwdl = false  (bool)
>   storage.cdrom.dvdr = false  (bool)
>   storage.cdrom.dvdram = false  (bool)
>   storage.cdrom.dvdrw = false  (bool)
>   storage.cdrom.hddvd = false  (bool)
>   storage.cdrom.hddvdr = false  (bool)
>   storage.cdrom.hddvdrw = false  (bool)
>   storage.cdrom.read_speed = 7056  (0x1b90)  (int)
>   storage.cdrom.support_media_changed = false  (bool)
>   storage.cdrom.write_speed = 0  (0x0)  (int)
>   storage.drive_type = 'cdrom'  (string)
>   storage.firmware_revision = '0008'  (string)
>   storage.hotpluggable = false  (bool)
>   storage.lun = 0  (0x0)  (int)
>   storage.media_check_enabled = true  (bool)
>   storage.model = 'DVD-ROM GD-8000'  (string)
>   storage.no_partitions_hint = true  (bool)
>   storage.originating_device = 
> '/org/freedesktop/Hal/devices/ide_host_1_scsi_host_scsi_device_lun0'  
> (string)
>   storage.removable = true  (bool)
>   storage.removable.media_available = false  (bool)
>   storage.removable.support_async_notification = false  (bool)
>   storage.requires_eject = true  (bool)
>   storage.vendor = 'HITACHI'  (string)
>
> udi = '/org/freedesktop/Hal/devices/ide_1_1'
>   ide.channel = 1  (0x1)  (int)
>   ide.host = 1  (0x1)  (int)
>   info.parent = '/org/freedesktop/Hal/devices/ide_host_1'  (string)
>   info.product = 'IDE Device (Slave)'  (string)
>   info.subsystem = 'ide'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/ide_1_1'  (string)
>
> udi = '/org/freedesktop/Hal/devices/storage_serial_CNL307252C'
>   block.device = '/dev/acd1'  (string)
>   block.freebsd.atapi_cam_device = '/dev/cd1'  (string)
>   block.freebsd.cam_path = '1,1,0'  (string)
>   block.is_volume = false  (bool)
>   block.major = 0  (0x0)  (int)
>   block.minor = 87  (0x57)  (int)
>   block.storage_device = 
> '/org/freedesktop/Hal/devices/storage_serial_CNL307252C'  (string)
>   freebsd.device_file = '/dev/acd1'  (string)
>   freebsd.driver = 'acd'  (string)
>   freebsd.unit = 1  (0x1)  (int)
>   info.ignore = true  (bool)
>   info.parent = '/org/freedesktop/Hal/devices/ide_1_1'  (string)
>   info.product = 'Ignored Device'  (string)
>   info.subsystem = 'block'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/ignored-device'  (string)
>   info.vendor = 'HP'  (string)
>   storage.automount_enabled_hint = true  (bool)
>   storage.bus = 'ide'  (string)
>   storage.cdrom.bd <http://storage.cdrom.bd> = false  (bool)
>   storage.cdrom.bdr = false  (bool)
>   storage.cdrom.bdre = false  (bool)
>   storage.cdrom.cdr = false  (bool)
>   storage.cdrom.cdrw = false  (bool)
>   storage.cdrom.dvd = false  (bool)
>   storage.cdrom.dvdplusr = false  (bool)
>   storage.cdrom.dvdplusrdl = false  (bool)
>   storage.cdrom.dvdplusrw = false  (bool)
>   storage.cdrom.dvdplusrwdl = false  (bool)
>   storage.cdrom.dvdr = false  (bool)
>   storage.cdrom.dvdram = false  (bool)
>   storage.cdrom.dvdrw = false  (bool)
>   storage.cdrom.hddvd = false  (bool)
>   storage.cdrom.hddvdr = false  (bool)
>   storage.cdrom.hddvdrw = false  (bool)
>   storage.cdrom.read_speed = 0  (0x0)  (int)
>   storage.cdrom.support_media_changed = false  (bool)
>   storage.cdrom.write_speed = 0  (0x0)  (int)
>   storage.drive_type = 'cdrom'  (string)
>   storage.firmware_revision = 'CS30'  (string)
>   storage.hotpluggable = false  (bool)
>   storage.media_check_enabled = true  (bool)
>   storage.model = 'HP DVD Writer 640'  (string)
>   storage.no_partitions_hint = true  (bool)
>   storage.originating_device = '/org/freedesktop/Hal/devices/ide_1_1'  
> (string)
>   storage.removable = true  (bool)
>   storage.removable.support_async_notification = false  (bool)
>   storage.requires_eject = true  (bool)
>   storage.serial = 'CNL307252C'  (string)
>   storage.vendor = 'HP'  (string)
>
> udi = '/org/freedesktop/Hal/devices/ide_1_0'
>   ide.channel = 0  (0x0)  (int)
>   ide.host = 1  (0x1)  (int)
>   info.parent = '/org/freedesktop/Hal/devices/ide_host_1'  (string)
>   info.product = 'IDE Device (Master)'  (string)
>   info.subsystem = 'ide'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/ide_1_0'  (string)
>
> udi = '/org/freedesktop/Hal/devices/storage_model_HITACHI_DVD_ROM_GD_8000'
>   block.device = '/dev/acd0'  (string)
>   block.freebsd.atapi_cam_device = '/dev/cd0'  (string)
>   block.freebsd.cam_path = '1,0,0'  (string)
>   block.is_volume = false  (bool)
>   block.major = 0  (0x0)  (int)
>   block.minor = 86  (0x56)  (int)
>   block.storage_device = 
> '/org/freedesktop/Hal/devices/storage_model_HITACHI_DVD_ROM_GD_8000'  
> (string)
>   freebsd.device_file = '/dev/acd0'  (string)
>   freebsd.driver = 'acd'  (string)
>   freebsd.unit = 0  (0x0)  (int)
>   info.ignore = true  (bool)
>   info.parent = '/org/freedesktop/Hal/devices/ide_1_0'  (string)
>   info.product = 'Ignored Device'  (string)
>   info.subsystem = 'block'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/ignored-device'  (string)
>   info.vendor = 'HITACHI'  (string)
>   storage.automount_enabled_hint = true  (bool)
>   storage.bus = 'ide'  (string)
>   storage.cdrom.bd <http://storage.cdrom.bd> = false  (bool)
>   storage.cdrom.bdr = false  (bool)
>   storage.cdrom.bdre = false  (bool)
>   storage.cdrom.cdr = false  (bool)
>   storage.cdrom.cdrw = false  (bool)
>   storage.cdrom.dvd = false  (bool)
>   storage.cdrom.dvdplusr = false  (bool)
>   storage.cdrom.dvdplusrdl = false  (bool)
>   storage.cdrom.dvdplusrw = false  (bool)
>   storage.cdrom.dvdplusrwdl = false  (bool)
>   storage.cdrom.dvdr = false  (bool)
>   storage.cdrom.dvdram = false  (bool)
>   storage.cdrom.dvdrw = false  (bool)
>   storage.cdrom.hddvd = false  (bool)
>   storage.cdrom.hddvdr = false  (bool)
>   storage.cdrom.hddvdrw = false  (bool)
>   storage.cdrom.read_speed = 0  (0x0)  (int)
>   storage.cdrom.support_media_changed = false  (bool)
>   storage.cdrom.write_speed = 0  (0x0)  (int)
>   storage.drive_type = 'cdrom'  (string)
>   storage.firmware_revision = '0008'  (string)
>   storage.hotpluggable = false  (bool)
>   storage.media_check_enabled = true  (bool)
>   storage.model = 'HITACHI DVD-ROM GD-8000'  (string)
>   storage.no_partitions_hint = true  (bool)
>   storage.originating_device = '/org/freedesktop/Hal/devices/ide_1_0'  
> (string)
>   storage.removable = true  (bool)
>   storage.removable.support_async_notification = false  (bool)
>   storage.requires_eject = true  (bool)
>   storage.vendor = 'HITACHI'  (string)
>
> udi = '/org/freedesktop/Hal/devices/pci_8086_2412'
>   freebsd.driver = 'uhci'  (string)
>   freebsd.unit = 0  (0x0)  (int)
>   info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>   info.product = '82801AA USB Controller'  (string)
>   info.subsystem = 'pci'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/pci_8086_2412'  (string)
>   info.vendor = 'Intel Corporation'  (string)
>   pci.device_class = 12  (0xc)  (int)
>   pci.device_protocol = 0  (0x0)  (int)
>   pci.device_subclass = 3  (0x3)  (int)
>   pci.freebsd.bus = 0  (0x0)  (int)
>   pci.freebsd.device = 31  (0x1f)  (int)
>   pci.freebsd.function = 2  (0x2)  (int)
>   pci.freebsd.secondary_bus = 0  (0x0)  (int)
>   pci.product = '82801AA USB Controller'  (string)
>   pci.product_id = 9234  (0x2412)  (int)
>   pci.subsys_product_id = 9234  (0x2412)  (int)
>   pci.subsys_vendor = 'Intel Corporation'  (string)
>   pci.subsys_vendor_id = 32902  (0x8086)  (int)
>   pci.vendor = 'Intel Corporation'  (string)
>   pci.vendor_id = 32902  (0x8086)  (int)
>
> udi = '/org/freedesktop/Hal/devices/usbus_0'
>   freebsd.driver = 'usbus'  (string)
>   freebsd.unit = 0  (0x0)  (int)
>   info.parent = '/org/freedesktop/Hal/devices/pci_8086_2412'  (string)
>   info.product = 'Intel 82801AA (ICH) USB controller'  (string)
>   info.subsystem = 'platform'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/usbus_0'  (string)
>   platform.id <http://platform.id> = 'usbus.0'  (string)
>
> udi = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial'
>   info.bus = 'usb_device'  (string)
>   info.parent = '/org/freedesktop/Hal/devices/usbus_0'  (string)
>   info.product = 'UHCI root HUB'  (string)
>   info.subsystem = 'usb_device'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial'  
> (string)
>   info.vendor = 'Intel'  (string)
>   usb_device.bus_number = 0  (0x0)  (int)
>   usb_device.can_wake_up = false  (bool)
>   usb_device.configuration = ''  (string)
>   usb_device.configuration_value = 1  (0x1)  (int)
>   usb_device.device_class = 9  (0x9)  (int)
>   usb_device.device_protocol = 0  (0x0)  (int)
>   usb_device.device_revision_bcd = 256  (0x100)  (int)
>   usb_device.device_subclass = 0  (0x0)  (int)
>   usb_device.is_self_powered = true  (bool)
>   usb_device.level_number = 0  (0x0)  (int)
>   usb_device.max_power = 0  (0x0)  (int)
>   usb_device.num_configurations = 1  (0x1)  (int)
>   usb_device.num_interfaces = 1  (0x1)  (int)
>   usb_device.num_ports = 0  (0x0)  (int)
>   usb_device.port_number = 1  (0x1)  (int)
>   usb_device.product = 'UHCI root HUB'  (string)
>   usb_device.product_id = 0  (0x0)  (int)
>   usb_device.serial = ''  (string)
>   usb_device.speed = 12.0 (12) (double)
>   usb_device.speed_bcd = 4608  (0x1200)  (int)
>   usb_device.vendor = 'Intel'  (string)
>   usb_device.vendor_id = 0  (0x0)  (int)
>   usb_device.version = 1.0 (1) (double)
>
> udi = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_if0'
>   freebsd.driver = 'uhub'  (string)
>   freebsd.unit = 0  (0x0)  (int)
>   info.bus = 'usb'  (string)
>   info.parent = 
> '/org/freedesktop/Hal/devices/usb_device_0_0_noserial'  (string)
>   info.product = 'UHCI root HUB'  (string)
>   info.subsystem = 'usb'  (string)
>   info.udi = 
> '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_if0'  (string)
>   info.vendor = 'Intel'  (string)
>   usb.freebsd.devname = 'uhub0'  (string)
>   usb.interface.class = 9  (0x9)  (int)
>   usb.interface.description = ''  (string)
>   usb.interface.number = 0  (0x0)  (int)
>   usb.interface.protocol = 0  (0x0)  (int)
>   usb.interface.subclass = 0  (0x0)  (int)
>   usb_device.bus_number = 0  (0x0)  (int)
>   usb_device.can_wake_up = false  (bool)
>   usb_device.configuration = ''  (string)
>   usb_device.configuration_value = 1  (0x1)  (int)
>   usb_device.device_class = 9  (0x9)  (int)
>   usb_device.device_protocol = 0  (0x0)  (int)
>   usb_device.device_revision_bcd = 256  (0x100)  (int)
>   usb_device.device_subclass = 0  (0x0)  (int)
>   usb_device.is_self_powered = true  (bool)
>   usb_device.level_number = 0  (0x0)  (int)
>   usb_device.max_power = 0  (0x0)  (int)
>   usb_device.num_configurations = 1  (0x1)  (int)
>   usb_device.num_interfaces = 1  (0x1)  (int)
>   usb_device.num_ports = 0  (0x0)  (int)
>   usb_device.port_number = 1  (0x1)  (int)
>   usb_device.product = 'UHCI root HUB'  (string)
>   usb_device.product_id = 0  (0x0)  (int)
>   usb_device.serial = ''  (string)
>   usb_device.speed = 12.0 (12) (double)
>   usb_device.speed_bcd = 4608  (0x1200)  (int)
>   usb_device.vendor = 'Intel'  (string)
>   usb_device.vendor_id = 0  (0x0)  (int)
>   usb_device.version = 1.0 (1) (double)
>
> udi = '/org/freedesktop/Hal/devices/pci_8086_2413'
>   info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>   info.product = '82801AA SMBus Controller'  (string)
>   info.subsystem = 'pci'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/pci_8086_2413'  (string)
>   info.vendor = 'Intel Corporation'  (string)
>   pci.device_class = 12  (0xc)  (int)
>   pci.device_protocol = 0  (0x0)  (int)
>   pci.device_subclass = 5  (0x5)  (int)
>   pci.freebsd.bus = 0  (0x0)  (int)
>   pci.freebsd.device = 31  (0x1f)  (int)
>   pci.freebsd.function = 3  (0x3)  (int)
>   pci.freebsd.secondary_bus = 0  (0x0)  (int)
>   pci.product = '82801AA SMBus Controller'  (string)
>   pci.product_id = 9235  (0x2413)  (int)
>   pci.subsys_product_id = 9235  (0x2413)  (int)
>   pci.subsys_vendor = 'Intel Corporation'  (string)
>   pci.subsys_vendor_id = 32902  (0x8086)  (int)
>   pci.vendor = 'Intel Corporation'  (string)
>   pci.vendor_id = 32902  (0x8086)  (int)
>
> udi = '/org/freedesktop/Hal/devices/pci_8086_2415'
>   freebsd.driver = 'pcm'  (string)
>   freebsd.unit = 0  (0x0)  (int)
>   info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
>   info.product = '82801AA AC'97 Audio Controller'  (string)
>   info.subsystem = 'pci'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/pci_8086_2415'  (string)
>   info.vendor = 'Intel Corporation'  (string)
>   pci.device_class = 4  (0x4)  (int)
>   pci.device_protocol = 0  (0x0)  (int)
>   pci.device_subclass = 1  (0x1)  (int)
>   pci.freebsd.bus = 0  (0x0)  (int)
>   pci.freebsd.device = 31  (0x1f)  (int)
>   pci.freebsd.function = 5  (0x5)  (int)
>   pci.freebsd.secondary_bus = 0  (0x0)  (int)
>   pci.product = '82801AA AC'97 Audio Controller'  (string)
>   pci.product_id = 9237  (0x2415)  (int)
>   pci.subsys_product_id = 4681  (0x1249)  (int)
>   pci.subsys_vendor = 'Hewlett-Packard Company'  (string)
>   pci.subsys_vendor_id = 4156  (0x103c)  (int)
>   pci.vendor = 'Intel Corporation'  (string)
>   pci.vendor_id = 32902  (0x8086)  (int)
>
> udi = '/org/freedesktop/Hal/devices/pci_8086_2415_oss_mixer_0'
>   info.capabilities = {'oss'} (string list)
>   info.category = 'oss'  (string)
>   info.parent = '/org/freedesktop/Hal/devices/pci_8086_2415'  (string)
>   info.product = '82801AA AC'97 Audio Controller (mixer)'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/pci_8086_2415_oss_mixer_0'  
> (string)
>   oss.card = 0  (0x0)  (int)
>   oss.card_id = 'snd_ich [MPSAFE] (1p:4v/1r:4v channels duplex 
> default)'  (string)
>   oss.device = 0  (0x0)  (int)
>   oss.device_file = '/dev/mixer0'  (string)
>   oss.device_id = '82801AA AC'97 Audio Controller (mixer)'  (string)
>   oss.originating_device = 
> '/org/freedesktop/Hal/devices/pci_8086_2415'  (string)
>   oss.type = 'mixer'  (string)
>
> udi = '/org/freedesktop/Hal/devices/pci_8086_2415_oss_pcm_0'
>   info.capabilities = {'oss'} (string list)
>   info.category = 'oss'  (string)
>   info.parent = '/org/freedesktop/Hal/devices/pci_8086_2415'  (string)
>   info.product = '82801AA AC'97 Audio Controller (pcm)'  (string)
>   info.udi = '/org/freedesktop/Hal/devices/pci_8086_2415_oss_pcm_0'  
> (string)
>   oss.card = 0  (0x0)  (int)
>   oss.card_id = 'snd_ich [MPSAFE] (1p:4v/1r:4v channels duplex 
> default)'  (string)
>   oss.device = 0  (0x0)  (int)
>   oss.device_file = '/dev/dsp0'  (string)
>   oss.device_id = '82801AA AC'97 Audio Controller (pcm)'  (string)
>   oss.originating_device = 
> '/org/freedesktop/Hal/devices/pci_8086_2415'  (string)
>   oss.type = 'pcm'  (string)
>
>
> Dumped 49 device(s) from the Global Device List.
> ------------------------------------------------
>
>
>
>
>
>     ------------------------------
>
>     Message: 3
>     Date: Sun, 10 Jan 2010 18:01:48 +0000
>     From: Dru Lavigne <drulavigne at sympatico.ca
>     <mailto:drulavigne at sympatico.ca>>
>     Subject: [PC-BSD Testing] some system settings issues
>     To: <testing at lists.pcbsd.org <mailto:testing at lists.pcbsd.org>>
>     Message-ID: <BLU149-W283429F4B8C25AFC418EA8AC6E0 at phx.gbl>
>     Content-Type: text/plain; charset="iso-8859-1"
>
>
>
>     services manager is flaky: the Apply button stays greyed out and
>     when you change a startup button the AutoStart column changes but
>     it changes back if you close and reopen this module. Also, half of
>     the services don't have the start/stop/restart buttons
>
>     desktop search: strigi fails to initialize when you enable and
>     apply. the error is: "Strigi service failed to initialize, most
>     likely due to an installation problem." Manually starting
>     /usr/local/bin/strigidaemon gives this error:
>
>     DaemonConfigurator: created default config for indexed dirs
>     WARNING: filed
>     'http://strigi.sf.net/ontologies/0.9#debugParseError' is not
>     defined in any rdfs ontoogy database.
>     Connection Error (Did not receive a reply. Possible causes
>     include: the remote application did not send a reply, the message
>     bus security policy blocked the reply, the reply timeout expired,
>     or the network connection was broken.)
>     Connection Null
>
>     system settings -> login manager module: needs to prompt for admin
>     password so options aren't greyed out
>
>     system settings -> power management module: needs to prompt for
>     admin password so can create power profiles. I started it using
>     kdesu kcmshell4 powerdevilconfig and received the following error:
>
>     The configuration module can not be started, since there seems to
>     be a problem with the PowerDevil Daemon. Read below for more
>     details. PowerDevil seems not to be started. Either you have its
>     service turned off, or there is a problem in D-Bus.
>
>     Service Manager reports PowerDevil as running. I could not find a
>     powerdevil daemon to manually start it (unless it is
>     /usr/sbin/powerd?)
>
>     Cheers,
>
>     Dru
>
>
>
>
>
>
>
>
>
>     -------------- next part --------------
>     An HTML attachment was scrubbed...
>     URL:
>     http://lists.pcbsd.org/pipermail/testing/attachments/20100110/a1c20567/attachment-0001.html
>
>     ------------------------------
>
>     Message: 4
>     Date: Sun, 10 Jan 2010 13:51:21 -0500
>     From: Ian Robinson <fitchkendall at gmail.com
>     <mailto:fitchkendall at gmail.com>>
>     Subject: Re: [PC-BSD Testing] Testing Digest, Vol 36, Issue 29
>     To: testing at lists.pcbsd.org <mailto:testing at lists.pcbsd.org>
>     Message-ID:
>          
>      <d241ea4c1001101051g136923d7hed20d1cd0cd4b6ae at mail.gmail.com
>     <mailto:d241ea4c1001101051g136923d7hed20d1cd0cd4b6ae at mail.gmail.com>>
>     Content-Type: text/plain; charset="iso-8859-1"
>
>     Re:  Dru's question:
>
>     >Does Dolphin admin-mode mount the floppy without the changes to
>     fstab and
>     devfs?
>     >If so, I will advise users to use Dolphin-admin. If not, Kris
>     needs to fix
>     some config stuff :-)
>     >Cheers,
>     >
>     >Dru
>     >
>
>     re: Brodey Dover's comment:
>
>      >When working it should be mounted to /media/floppy.
>     >
>     >Also, when working, your floppy should work akin to a USB device. I
>     >don't think you should write up anything like updated fstab
>     because you
>     >would be writing a hack-around tutorial for something that is
>     actually
>     >broken.
>     >
>      >Brodey
>
>     I will revert back to the original configuration, test
>     dolphi-admin, and
>     report back soon.
>
>     Ian Robinson
>
>
>
>
>     ------------------------------
>
>     _______________________________________________
>     Testing mailing list
>     Testing at lists.pcbsd.org <mailto:Testing at lists.pcbsd.org>
>     http://lists.pcbsd.org/mailman/listinfo/testing
>
>
>     End of Testing Digest, Vol 36, Issue 29
>     ***************************************
>     -------------- next part --------------
>     An HTML attachment was scrubbed...
>     URL:
>     http://lists.pcbsd.org/pipermail/testing/attachments/20100110/20f518ec/attachment-0001.html
>
>     ------------------------------
>
>     _______________________________________________
>     Testing mailing list
>     Testing at lists.pcbsd.org <mailto:Testing at lists.pcbsd.org>
>     http://lists.pcbsd.org/mailman/listinfo/testing
>
>
>     End of Testing Digest, Vol 36, Issue 30
>     ***************************************
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Testing mailing list
> Testing at lists.pcbsd.org
> http://lists.pcbsd.org/mailman/listinfo/testing
>   
Excellent thanks Ian! There is a problem...I don't see anything wrong!

There is another way to check though, if you launch lshal -m and then 
insert the disk there should be information that would show what lshal 
is up to, or not up to.

You can do this for the other two cases, insert disk, click on floppy 
from places and click on floppy from dolphin-admin.

We know that it is setup and ready to go, there HAS to be some service 
or application that doesn't feel like playing together.

Brodey
Thanks for the output!


More information about the Testing mailing list