[PC-BSD Testing] Testing Floppies - Continued

Ian Robinson fitchkendall at gmail.com
Sun Jan 10 13:11:45 PST 2010


Re:  Testing Floppies, Brodey Dover asked:

>Can I see the dmesg output please?
>and now that I think about it. lshal from working computer
>with floppydrive and lshal from the non-working computer please.

1.  Dmesg output (actually from System Settings/System Manager "Generate"

PC-BSD 8.0-BETA Diagnostic Sheet
Generated: Sun Jan 10 16:03:41 EST 2010

-----------------Dmesg Output-------------------------

Copyright (c) 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
    The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.0-RELEASE-p1 #3: Fri Dec 11 13:33:42 PST 2009
    root at build8x32.pcbsd.org:
/usr/obj/usr/pcbsd-build80/fbsd-source/8.0-src/sys/PCBSD
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel Pentium III (996.68-MHz 686-class CPU)
  Origin = "GenuineIntel"  Id = 0x686  Stepping = 6

Features=0x383f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE>
real memory  = 536870912 (512 MB)
avail memory = 502050816 (478 MB)
kbd1 at kbdmux0
module_register_init: MOD_LOAD (splash_pcx, 0xc0fbe830, 0) error 2
cryptosoft0: <software crypto> on motherboard
acpi0: <PTLTD   RSDT> on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
agp0: <Intel 82815 (i815 GMCH) host to PCI bridge> on hostb0
pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
pci2: <ACPI PCI bus> on pcib1
vgapci0: <VGA-compatible display> mem
0xe4000000-0xe4ffffff,0xf0000000-0xf3ffffff,0xec000000-0xec07ffff irq 10 at
device 0.0 on pci2
nvidia0: <GeForce4 Ti 4200> on vgapci0
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
nvidia0: [GIANT-LOCKED]
nvidia0: [ITHREAD]
pcib2: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci1: <ACPI PCI bus> on pcib2
xl0: <3Com 3c905C-TX Fast Etherlink XL> port 0x2000-0x207f mem
0xe5000000-0xe500007f irq 5 at device 4.0 on pci1
miibus0: <MII bus> on xl0
ukphy0: <Generic IEEE 802.3u media interface> PHY 24 on miibus0
ukphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
xl0: Ethernet address: 00:04:75:50:68:48
xl0: [ITHREAD]
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
atapci0: <Intel ICH UDMA66 controller> port
0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x1800-0x180f at device 31.1 on pci0
ata0: <ATA channel 0> on atapci0
ata0: [ITHREAD]
ata1: <ATA channel 1> on atapci0
ata1: [ITHREAD]
uhci0: <Intel 82801AA (ICH) USB controller> port 0x1820-0x183f at device
31.2 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801AA (ICH) USB controller> on uhci0
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
pci0: <multimedia, audio> at device 31.5 (no driver attached)
acpi_button0: <Power Button> on acpi0
atrtc0: <AT realtime clock> port 0x70-0x71 irq 8 on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model IntelliMouse, device ID 3
fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
fd0: <1440-KB 3.5" drive> on fdc0 drive 0
uart0: <16550 or compatible> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
uart0: [FILTER]
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
ppc0: <Parallel port> port 0x378-0x37f irq 7 on acpi0
ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode
ppc0: [ITHREAD]
ppbus0: <Parallel port bus> on ppc0
lpt0: <Printer> on ppbus0
lpt0: [ITHREAD]
lpt0: Interrupt-driven port
ppi0: <Parallel I/O> on ppbus0
plip0: <PLIP network interface> on ppbus0
plip0: [ITHREAD]
cpu0: <ACPI CPU> on acpi0
pmtimer0 on isa0
orm0: <ISA Option ROMs> at iomem
0xc0000-0xcefff,0xcf000-0xcf7ff,0xe4000-0xeffff pnpid ORM0000 on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ZFS NOTICE: Prefetch is disabled by default on i386 -- to enable,
            add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS WARNING: Recommended minimum kmem_size is 512MB; expect unstable
behavior.
             Consider tuning vm.kmem_size and vm.kmem_size_max
             in /boot/loader.conf.
ZFS filesystem version 13
ZFS storage pool version 13
Timecounter "TSC" frequency 996681955 Hz quality 800
Timecounters tick every 1.000 msec
usbus0: 12Mbps Full Speed USB v1.0
ad0: 29311MB <Maxtor 5T030H3 TAH71DP0> at ata0-master UDMA66
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
acd0: DVDROM <HITACHI DVD-ROM GD-8000/0008> at ata1-master UDMA33
acd1: DVDR <HP DVD Writer 640/CS30> at ata1-slave UDMA33
uhub0: 2 ports with 2 removable, self powered
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
(probe0:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe0:ata1:0:0:0): CAM Status: SCSI Status Error
(probe0:ata1:0:0:0): SCSI Status: Check Condition
(probe0:ata1:0:0:0): NOT READY asc:3a,0
(probe0:ata1:0:0:0): Medium not present
(probe0:ata1:0:0:0): Unretryable error
(probe1:ata1:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
(probe1:ata1:0:1:0): CAM Status: SCSI Status Error
(probe1:ata1:0:1:0): SCSI Status: Check Condition
(probe1:ata1:0:1:0): NOT READY asc:3a,0
(probe1:ata1:0:1:0): Medium not present
(probe1:ata1:0:1:0): Unretryable error
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
cd0 at ata1 bus 0 target 0 lun 0
cd0: <HITACHI DVD-ROM GD-8000 0008> Removable CD-ROM SCSI-0 device
cd0: 33.000MB/s transfers
cd0: Attempt to query device size failed: NOT READY, Medium not present
cd1 at ata1 bus 0 target 1 lun 0
cd1: <HP DVD Writer 640c CS30> Removable CD-ROM SCSI-0 device
cd1: 33.000MB/s transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present
Trying to mount root from ufs:/dev/label/rootfs0
ipfw2 (+ipv6) initialized, divert loadable, nat loadable, rule-based
forwarding disabled, default to deny, logging disabled
pcm0: <Intel ICH (82801AA)> port 0x1200-0x12ff,0x1300-0x133f at device 31.5
on pci0
pcm0: [ITHREAD]
pcm0: <Cirrus Logic CS4299 AC97 Codec>
NVRM: detected agp.ko, aborting NVIDIA AGP setup!

-----------------Messages Output----------------------

Jan 10 15:54:38 pcbsd-4559 kernel: cd0 at ata1 bus 0 target 0 lun 0
Jan 10 15:54:38 pcbsd-4559 kernel: cd0: <HITACHI DVD-ROM GD-8000 0008>
Removable CD-ROM SCSI-0 device
Jan 10 15:54:38 pcbsd-4559 kernel: cd0: 33.000MB/s transfers
Jan 10 15:54:38 pcbsd-4559 kernel: cd0: Attempt to query device size failed:
NOT READY, Medium not present
Jan 10 15:54:38 pcbsd-4559 kernel: cd1 at ata1 bus 0 target 1 lun 0
Jan 10 15:54:38 pcbsd-4559 kernel: cd1: <HP DVD Writer 640c CS30> Removable
CD-ROM SCSI-0 device
Jan 10 15:54:38 pcbsd-4559 kernel: cd1: 33.000MB/s transfers
Jan 10 15:54:38 pcbsd-4559 kernel: cd1: Attempt to query device size failed:
NOT READY, Medium not present
Jan 10 15:54:38 pcbsd-4559 kernel: Trying to mount root from
ufs:/dev/label/rootfs0
Jan 10 15:54:38 pcbsd-4559 kernel: ipfw2 (+ipv6) initialized, divert
loadable, nat loadable, rule-based forwarding disabled, default to deny,
logging disabled
Jan 10 15:54:44 pcbsd-4559 kernel: pcm0: <Intel ICH (82801AA)> port
0x1200-0x12ff,0x1300-0x133f at device 31.5 on pci0
Jan 10 15:54:44 pcbsd-4559 kernel: pcm0: [ITHREAD]
Jan 10 15:54:44 pcbsd-4559 kernel: pcm0: <Cirrus Logic CS4299 AC97 Codec>
Jan 10 15:54:48 pcbsd-4559 ntpd[1355]: ntpd 4.2.4p5-a (1)
Jan 10 15:54:53 pcbsd-4559 avahi-daemon[1648]: WARNING: No NSS support for
mDNS detected, consider installing nss-mdns!
Jan 10 15:54:59 pcbsd-4559 kernel: NVRM: detected agp.ko, aborting NVIDIA
AGP setup!
Jan 10 15:55:04 pcbsd-4559 kdm_greet[1987]: Cannot set locale. Translations
will not work.
Jan 10 15:58:07 pcbsd-4559 ntpd[1356]: time reset +1.598948 s
Jan 10 15:58:07 pcbsd-4559 ntpd[1356]: kernel time sync status change 2001
Jan 10 16:03:15 pcbsd-4559 su: IR to root on /dev/pts/2

------------------pciconf-----------------------------

hostb0 at pci0:0:0:0:    class=0x060000 card=0x11308086 chip=0x11308086
rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82815/EM/EP/P 815/EM/EP/P (Solano) Host to I/O Hub Bridge'
    class      = bridge
    subclass   = HOST-PCI
pcib1 at pci0:0:1:0:    class=0x060400 card=0x00000000 chip=0x11318086 rev=0x02
hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82815/EM/EP/P 815/EM/EP/P (Solano) PCI to AGP Bridge'
    class      = bridge
    subclass   = PCI-PCI
pcib2 at pci0:0:30:0:    class=0x060400 card=0x00000000 chip=0x24188086
rev=0x02 hdr=0x01
    vendor     = 'Intel Corporation'
    device     = '82801AA 8xx Chipset Hub to PCI Bridge'
    class      = bridge
    subclass   = PCI-PCI
isab0 at pci0:0:31:0:    class=0x060100 card=0x00000000 chip=0x24108086
rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801AA 8xx Chipset LPC Interface Bridge'
    class      = bridge
    subclass   = PCI-ISA
atapci0 at pci0:0:31:1:    class=0x010180 card=0x24118086 chip=0x24118086
rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'IDE Controller (UltraATA/66) (82801AA)'
    class      = mass storage
    subclass   = ATA
uhci0 at pci0:0:31:2:    class=0x0c0300 card=0x24128086 chip=0x24128086
rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801AA 8xx Chipset USB Controllers'
    class      = serial bus
    subclass   = USB
none0 at pci0:0:31:3:    class=0x0c0500 card=0x24138086 chip=0x24138086
rev=0x02 hdr=0x00
    vendor     = 'Intel Corporation'
    device     = '82801AA 8xx Chipset SMBus Controller'
    class      = serial bus
    subclass   = SMBus
pcm0 at pci0:0:31:5:    class=0x040100 card=0x1249103c chip=0x24158086 rev=0x02
hdr=0x00
    vendor     = 'Intel Corporation'
    device     = 'Aureal (AD1881 SOUNDMAX) Placa Me Asaki P3-141 (Intel
82801DBM SM/BUS Controller 24C3)'
    class      = multimedia
    subclass   = audio
vgapci0 at pci0:2:0:0:    class=0x030000 card=0x00000000 chip=0x025310de
rev=0xa3 hdr=0x00
    vendor     = 'Nvidia Corp'
    device     = 'Geforce4 TI 4200 128 Mo (NVIDIA Corporation)'
    class      = display
    subclass   = VGA
xl0 at pci0:1:4:0:    class=0x020000 card=0x1246103c chip=0x920010b7 rev=0x78
hdr=0x00
    vendor     = '3COM Corp, Networking Division'
    device     = 'Fast EtherLink for PC Management NIC (3C905 CX-TXM)'
    class      = network
    subclass   = ethernet

------------------xorg.conf---------------------------

# Xorg.conf file generated for PC-BSD

Section "ServerLayout"
    Identifier     "XFree86 Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "ServerFlags"
        Option "AutoAddDevices" "False"
        Option "AllowEmptyInput" "Off"
EndSection

Section "Files"
    ModulePath      "/usr/local/lib/xorg/modules"
    FontPath        "/Programs/fonts/"
    FontPath        "/usr/local/lib/X11/fonts/cyrillic/"
    FontPath        "/usr/local/lib/X11/fonts/TrueType/"
    FontPath        "/usr/local/lib/X11/fonts/webfonts/"
    FontPath        "/usr/local/lib/X11/fonts/misc/"
    FontPath        "/usr/local/lib/X11/fonts/TTF/"
    FontPath        "/usr/local/lib/X11/fonts/Type1/"
    FontPath        "/usr/local/lib/X11/fonts/CID/"
    FontPath        "/usr/local/lib/X11/fonts/75dpi/"
    FontPath        "/usr/local/lib/X11/fonts/100dpi/"
    FontPath        "/usr/local/lib/X11/fonts/dejavu/"
    FontPath        "/usr/local/lib/X11/fonts/local/"
EndSection

Section "Module"
    Load           "ddc"
    Load           "dbe"
    Load           "extmod"
    Load       "glx"
    Load           "xtrap"
    Load           "freetype"
EndSection

Section "InputDevice"
    Identifier     "Keyboard0"
    Driver         "keyboard"
    Option         "XkbModel" "pc105"
    Option         "XkbLayout" "us"
    Option         "XkbVariant" ""
EndSection

Section "InputDevice"
    Identifier     "Mouse0"
    Driver         "mouse"
    Option         "Protocol" "auto"
    Option         "Device" "/dev/sysmouse"
    Option         "Buttons" "6"
    Option         "ZAxisMapping" "4 5"
    Option         "Emulate3Buttons"
EndSection

Section "Extensions"
    Option    "Composite" "Enable"
EndSection

Section "Monitor"
    Identifier     "Monitor0"
    VendorName     "Monitor Vendor"
    ModelName      "Monitor Model"

    HorizSync    30.0-70.0
    VertRefresh  48.0-120.0
EndSection


Section "Device"
    Identifier      "Card0"
    Screen           0
#    Option         "AllowGLXWithComposite" "true"
#    Option         "RenderAccel" "true"
#    Option         "AddARGBGLXVisuals" "true"
#    Option         "UseEvents" "false"
#    Option         "TripleBuffer" "1"
#    Option         "DamageEvents" "1"
#    Option         "BackingStore" "1"
#    Option         "PixmapCacheSize" "70000"
#    Option         "OnDemandVBlankInterrupts" "true"
#    Option         "XAANoOffscreenPixmaps" "true"
    Option         "NoLogo" "True"
    Driver         "nvidia"
    VendorName     "nVidia Corporation"
    BusID      "PCI:2:0:0"
EndSection


Section "Screen"
    Identifier     "Screen0"
    Device         "Card0"
    Monitor        "Monitor0"
    DefaultDepth   24
    SubSection     "Display"
        Depth      24
        Modes      "1280x1024"
    EndSubSection
EndSection

------------------RC File-----------------------------

background_dhclient="YES"
hostname="pcbsd"
compat5x_enable="YES"
sshd_enable="YES"
usbd_enable="YES"
devd_enable="YES"
devfs_system_ruleset="devfsrules_common"
ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/kde4/lib
/usr/local/lib/compat/pkg"

# Enable console mouse
moused_type="auto"
moused_enable="YES"

# Enable the pcbsd startup / shutdown scripts
pcbsdinit_enable="YES"

#Enable samba server
samba_enable="YES"
winbindd_enable="YES"

# Disable LPD
lpd_enable="NO"

# Enable CUPS
cupsd_enable="YES"
linux_enable="YES"

# FSCK Enhancements
fsck_y_enable="YES"
background_fsck="NO"

# tmpmfs Flags
tmpmfs="YES"
tmpsize="800m"
tmpmfs_flags="-S"
clear_tmp="YES"

# Denyhosts Startup
denyhosts_enable="YES"

# powerd: adaptive speed while on AC power, adaptive while on battery power
# WARNING: May cause crashes with nvidia driver
#powerd_enable="YES"
#powerd_flags="-a adaptive -b adaptive" # set CPU frequency

# enable HAL / DBUS
dbus_enable="YES"
polkitd_enable="YES"
hald_enable="YES"

# Enables support for HPLIP
hpiod_enable="NO"
hpssd_enable="NO"

# Enable the firewall
pf_rules="/etc/pf.conf"
pf_enable="YES"
pf_flags=""

# Enable ipfw and open it by default since we have PF
firewall_enable="YES"
firewall_type="open"

# Enable sound-support
snddetect_enable="YES"
mixer_enable="YES"

# Enable avahi_daemon
avahi_daemon_enable="YES"

# Run the port jail
portjail_enable="YES"

# Added for sound support in the portjail, access to /dev/random, /dev/null,
etc.
jail_pcbsd_devfs_enable="YES"

# Start the swapmonitor
swapmonitor_enable="YES"

# Enable IPV6 support
ipv6_enable="YES"

warden_enable="YES"
ntpd_enable="YES"
# Auto-Enabled NICs from pc-sysinstall
ifconfig_xl0="DHCP"
hostname="pcbsd-4559"

------------------Loader File-------------------------

# Kernel Options
kern.ipc.shmseg=1024
kern.ipc.shmmni=1024

# Enable the splash screen
vesa_load="YES"
splash_pcx_load="YES"
bitmap_load="YES"
bitmap_name="/boot/loading-screen.pcx"

# Load Wireless Support
if_ipw_load="YES"
if_iwi_load="YES"
if_wpi_load="YES"
legal.intel_ipw.license_ack=1
legal.intel_iwi.license_ack=1
legal.intel_wpi.license_ack=1

# Load mmc card-reader support
mmc_load="YES"
mmcsd_load="YES"
sdhci_load="YES"

# Load support for scd
scd_load="YES"

# Load sound-support
sound_load="YES"
snd_uaudio_load="YES"

# Load geom support
geom_journal_load="YES"
geom_uzip_load="YES"
geom_mirror_load="YES"
geom_eli_load="YES"

# Load File-System Support
libiconv_load="YES"
libmchain_load="YES"
cd9660_iconv_load="YES"
msdosfs_iconv_load="YES"
ntfs_load="YES"
ntfs_iconv_load="YES"
udf_load="YES"
udf_iconv_load="YES"
zfs_load="YES"
sem_load="YES"
nvidia_load="YES"

------------------Free Space--------------------------

Filesystem         1M-blocks Used Avail Capacity  Mounted on
/dev/label/rootfs0      1978  370  1449    20%    /
devfs                      0    0     0   100%    /dev
/dev/label/var0          989   47   862     5%    /var
/dev/label/usr0        24414 8834 13626    39%    /usr
procfs                     0    0     0   100%    /proc
linprocfs                  0    0     0   100%    /compat/linux/proc
/dev/md0                 771    0   709     0%    /tmp
/tmp                     771    0   709     0%    /usr/jails/portjail/tmp
/usr/home              24414 8834 13626    39%
/usr/jails/portjail/usr/home
devfs                      0    0     0   100%    /usr/jails/portjail/dev
procfs                     0    0     0   100%    /usr/jails/portjail/proc

------------------System Processes--------------------

last pid:  3924;  load averages:  2.36,  1.29,  0.62  up 0+00:10:06
16:03:42
142 processes: 1 running, 141 sleeping

Mem: 255M Active, 122M Inact, 80M Wired, 11M Cache, 59M Buf, 13M Free
Swap: 1022M Total, 1022M Free


  PID USERNAME    THR PRI NICE   SIZE    RES STATE    TIME   WCPU COMMAND
 1903 root          1  57    0 77992K 59420K select   0:19 13.77% Xorg
 3833 root          1  53    0 63128K 23040K select   0:04 13.28% kdeinit4
 3347 IR            1  50    0   100M 43240K select   0:19  9.67% kdeinit4
 3894 root          1  59    0 65260K 23900K select   0:01  8.59% knotify4
 3804 root          2  76    0 77600K 36496K select   0:03  6.69% kcmshell4
 3914 root          1  76    0  3624K  1144K piperd   0:00  6.69% sh
 3858 root          1  44    0 39820K 16932K select   0:00  3.08% kdeinit4
 3830 root          1  44    0 40816K 18524K select   0:00  2.78% kdeinit4
 3828 root          1  52    0 38692K 14980K select   0:00  2.78% kdeinit4
 3826 root          1  44    0  3500K  1540K select   0:00  1.86%
dbus-daemon
 3373 IR            2  76    0   264M 50196K select   0:04  0.29% kwin
 3732 IR            1  44    0 81580K 39544K select   0:03  0.29%
systemsettings
 1529 messagebus    1  44    0  3500K  1860K select   0:01  0.29%
dbus-daemon
 3395 IR            2  44    0   347M   107M ucond    0:20  0.00% kdeinit4
 3370 IR            4  49    0   116M 39496K ucond    0:05  0.00% knotify4
 3456 IR            1  44    0   261M 52508K select   0:02  0.00% kdeinit4
 3773 IR            2  76    0 72068K 29560K select   0:01  0.00% kdesu
 3393 IR            1  44    0 96872K 36584K select   0:01  0.00% kdeinit4





2.  Lshal output (from computer w/ edited /etc/fstab)
     i.e., the computer that can mount fd0 in dolphin-admin
     when /etc/fstab is modified.  (Same computer that
      will not mount fd0 when /etc/fstab is not modified.)


Dumping 49 device(s) from the Global Device List:
-------------------------------------------------
udi = '/org/freedesktop/Hal/devices/computer'
  info.callouts.add = {'hal-storage-cleanup-all-mountpoints'} (string list)
  info.interfaces = {'org.freedesktop.Hal.Device.SystemPowerManagement'}
(string list)
  info.product = 'Computer'  (string)
  info.subsystem = 'unknown'  (string)
  info.udi = '/org/freedesktop/Hal/devices/computer'  (string)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_argnames =
{'num_seconds_to_sleep', 'num_seconds_to_sleep', '', '', '',
'enable_power_save'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_execpaths =
{'hal-system-power-suspend', 'hal-system-power-suspend-hybrid',
'hal-system-power-hibernate', 'hal-system-power-shutdown',
'hal-system-power-reboot', 'hal-system-power-set-power-save'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_names =
{'Suspend', 'SuspendHybrid', 'Hibernate', 'Shutdown', 'Reboot',
'SetPowerSave'} (string list)
  org.freedesktop.Hal.Device.SystemPowerManagement.method_signatures = {'i',
'i', '', '', '', 'b'} (string list)
  org.freedesktop.Hal.version = '0.5.13'  (string)
  org.freedesktop.Hal.version.major = 0  (0x0)  (int)
  org.freedesktop.Hal.version.micro = 13  (0xd)  (int)
  org.freedesktop.Hal.version.minor = 5  (0x5)  (int)
  power_management.can_hibernate = true  (bool)
  power_management.can_suspend = true  (bool)
  power_management.can_suspend_to_disk = true  (bool)
  power_management.can_suspend_to_ram = true  (bool)
  power_management.is_powersave_set = false  (bool)
  power_management.type = 'acpi'  (string)
  system.chassis.manufacturer = 'Hewlett-Packard'  (string)
  system.chassis.type = 'Mini Tower'  (string)
  system.firmware.release_date = '12/05/2001'  (string)
  system.firmware.vendor = 'Phoenix Technologies Ltd.'  (string)
  system.firmware.version = 'IP.01.08US'  (string)
  system.formfactor = 'desktop'  (string)
  system.hardware.product = 'HP Vectra'  (string)
  system.hardware.serial = 'US13705225'  (string)
  system.hardware.uuid = '8DEE53C1-A813-11D5-83E8-0A81F5B8CA22'  (string)
  system.hardware.vendor = 'Hewlett-Packard'  (string)
  system.hardware.version = 'VL400'  (string)
  system.kernel.machine = 'i386'  (string)
  system.kernel.name = 'FreeBSD'  (string)
  system.kernel.version = '8.0-RELEASE-p1'  (string)
  system.product = 'HP Vectra VL400'  (string)

udi = '/org/freedesktop/Hal/devices/acpi_button_0'
  button.type = 'power'  (string)
  freebsd.driver = 'acpi_button'  (string)
  freebsd.unit = 0  (0x0)  (int)
  info.capabilities = {'button'} (string list)
  info.category = 'button'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Power Button'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/acpi_button_0'  (string)
  platform.id = 'acpi_button.0'  (string)
  pnp.description = 'ACPI power button device'  (string)
  pnp.id = 'PNP0C0C'  (string)

udi = '/org/freedesktop/Hal/devices/cpu_0'
  freebsd.driver = 'cpu'  (string)
  freebsd.unit = 0  (0x0)  (int)
  info.capabilities = {'processor'} (string list)
  info.category = 'processor'  (string)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Intel Pentium III'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/cpu_0'  (string)
  platform.id = 'cpu.0'  (string)
  processor.can_throttle = false  (bool)
  processor.maximum_speed = 996  (0x3e4)  (int)
  processor.number = 0  (0x0)  (int)

udi = '/org/freedesktop/Hal/devices/fdc_0'
  freebsd.driver = 'fdc'  (string)
  freebsd.unit = 0  (0x0)  (int)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Enhanced floppy controller'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/fdc_0'  (string)
  platform.id = 'fdc.0'  (string)
  pnp.description = 'PC standard floppy disk controller'  (string)
  pnp.id = 'PNP0700'  (string)

udi = '/org/freedesktop/Hal/devices/storage_model_1440_KB_3_5__drive'
  block.device = '/dev/fd0'  (string)
  block.is_volume = false  (bool)
  block.major = 0  (0x0)  (int)
  block.minor = 83  (0x53)  (int)
  block.storage_device =
'/org/freedesktop/Hal/devices/storage_model_1440_KB_3_5__drive'  (string)
  freebsd.device_file = '/dev/fd0'  (string)
  freebsd.driver = 'fd'  (string)
  freebsd.unit = 0  (0x0)  (int)
  info.addons = {'hald-addon-storage'} (string list)
  info.capabilities = {'block', 'storage'} (string list)
  info.category = 'storage'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume',
'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/fdc_0'  (string)
  info.product = '1440-KB 3.5" drive'  (string)
  info.subsystem = 'block'  (string)
  info.udi =
'/org/freedesktop/Hal/devices/storage_model_1440_KB_3_5__drive'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype
extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount',
'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount',
'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'}
(string list)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'platform'  (string)
  storage.drive_type = 'floppy'  (string)
  storage.hotpluggable = false  (bool)
  storage.media_check_enabled = false  (bool)
  storage.model = '1440-KB 3.5" drive'  (string)
  storage.no_partitions_hint = true  (bool)
  storage.originating_device = ''  (string)
  storage.removable = true  (bool)
  storage.removable.support_async_notification = false  (bool)
  storage.requires_eject = false  (bool)
  storage.vendor = ''  (string)
  volume.mount.valid_options = {'ro', 'noexec', 'noatime'} (string list)

udi = '/org/freedesktop/Hal/devices/atkbdc_0'
  freebsd.driver = 'atkbdc'  (string)
  freebsd.unit = 0  (0x0)  (int)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = 'Keyboard controller (i8042)'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/atkbdc_0'  (string)
  platform.id = 'atkbdc.0'  (string)
  pnp.description = 'IBM Enhanced (101/102-key, PS/2 mouse support)'
(string)
  pnp.id = 'PNP0303'  (string)

udi = '/org/freedesktop/Hal/devices/atkbd_0'
  freebsd.device_file = '/dev/atkbd0'  (string)
  freebsd.driver = 'atkbd'  (string)
  freebsd.unit = 0  (0x0)  (int)
  info.capabilities = {'input', 'input.keyboard'} (string list)
  info.category = 'input.keyboard'  (string)
  info.parent = '/org/freedesktop/Hal/devices/atkbdc_0'  (string)
  info.product = 'AT Keyboard'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/atkbd_0'  (string)
  input.device = ''  (string)
  input.x11_driver = 'kbd'  (string)
  platform.id = 'atkbd.0'  (string)

udi = '/org/freedesktop/Hal/devices/psm_0'
  freebsd.device_file = '/dev/psm0'  (string)
  freebsd.driver = 'psm'  (string)
  freebsd.unit = 0  (0x0)  (int)
  info.addons = {'hald-addon-mouse-sysmouse'} (string list)
  info.capabilities = {'input', 'input.mouse'} (string list)
  info.category = 'input.mouse'  (string)
  info.parent = '/org/freedesktop/Hal/devices/atkbdc_0'  (string)
  info.product = 'PS/2 Mouse'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/psm_0'  (string)
  input.device = '/dev/sysmouse'  (string)
  input.x11_driver = 'mouse'  (string)
  platform.id = 'psm.0'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_1130'
  freebsd.driver = 'hostb'  (string)
  freebsd.unit = 0  (0x0)  (int)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82815 815 Chipset Host Bridge and Memory Controller Hub'
(string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_1130'  (string)
  info.vendor = 'Intel Corporation'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.freebsd.bus = 0  (0x0)  (int)
  pci.freebsd.device = 0  (0x0)  (int)
  pci.freebsd.function = 0  (0x0)  (int)
  pci.freebsd.secondary_bus = 0  (0x0)  (int)
  pci.product = '82815 815 Chipset Host Bridge and Memory Controller Hub'
(string)
  pci.product_id = 4400  (0x1130)  (int)
  pci.subsys_product_id = 4400  (0x1130)  (int)
  pci.subsys_vendor = 'Intel Corporation'  (string)
  pci.subsys_vendor_id = 32902  (0x8086)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_1131'
  freebsd.driver = 'pcib'  (string)
  freebsd.unit = 1  (0x1)  (int)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82815 815 Chipset AGP Bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_1131'  (string)
  info.vendor = 'Intel Corporation'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.freebsd.bus = 0  (0x0)  (int)
  pci.freebsd.device = 1  (0x1)  (int)
  pci.freebsd.function = 0  (0x0)  (int)
  pci.freebsd.secondary_bus = 2  (0x2)  (int)
  pci.product = '82815 815 Chipset AGP Bridge'  (string)
  pci.product_id = 4401  (0x1131)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10de_0253'
  freebsd.driver = 'vgapci'  (string)
  freebsd.unit = 0  (0x0)  (int)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_1131'  (string)
  info.product = 'NV25 [GeForce4 Ti 4200]'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10de_0253'  (string)
  info.vendor = 'nVidia Corporation'  (string)
  pci.device_class = 3  (0x3)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.freebsd.bus = 2  (0x2)  (int)
  pci.freebsd.device = 0  (0x0)  (int)
  pci.freebsd.function = 0  (0x0)  (int)
  pci.freebsd.secondary_bus = 0  (0x0)  (int)
  pci.product = 'NV25 [GeForce4 Ti 4200]'  (string)
  pci.product_id = 595  (0x253)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'nVidia Corporation'  (string)
  pci.vendor_id = 4318  (0x10de)  (int)

udi = '/org/freedesktop/Hal/devices/nvidia_0'
  freebsd.device_file = '/dev/nvidia0'  (string)
  freebsd.driver = 'nvidia'  (string)
  freebsd.unit = 0  (0x0)  (int)
  info.parent = '/org/freedesktop/Hal/devices/pci_10de_0253'  (string)
  info.product = 'GeForce4 Ti 4200'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/nvidia_0'  (string)
  platform.id = 'nvidia.0'  (string)

udi = '/org/freedesktop/Hal/devices/nvidia_0_drm_nvidia_card0'
  drm.dri_library = 'nvidia'  (string)
  drm.version = 'NVIDIA FreeBSD x86 Kernel Module  96.43.13  Thu Jun 25
17:53:46 PDT 2009'  (string)
  freebsd.device_file = '/dev/nvidia0'  (string)
  info.capabilities = {'drm'} (string list)
  info.category = 'drm'  (string)
  info.parent = '/org/freedesktop/Hal/devices/nvidia_0'  (string)
  info.product = 'Direct Rendering Manager Device'  (string)
  info.subsystem = 'drm'  (string)
  info.udi = '/org/freedesktop/Hal/devices/nvidia_0_drm_nvidia_card0'
(string)
  info.vendor = 'nVidia Corporation'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_2418'
  freebsd.driver = 'pcib'  (string)
  freebsd.unit = 2  (0x2)  (int)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801AA PCI Bridge'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2418'  (string)
  info.vendor = 'Intel Corporation'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 4  (0x4)  (int)
  pci.freebsd.bus = 0  (0x0)  (int)
  pci.freebsd.device = 30  (0x1e)  (int)
  pci.freebsd.function = 0  (0x0)  (int)
  pci.freebsd.secondary_bus = 1  (0x1)  (int)
  pci.product = '82801AA PCI Bridge'  (string)
  pci.product_id = 9240  (0x2418)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_10b7_9200'
  freebsd.driver = 'xl'  (string)
  freebsd.unit = 0  (0x0)  (int)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2418'  (string)
  info.product = '3c905C-TX/TX-M [Tornado]'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_10b7_9200'  (string)
  info.vendor = '3Com Corporation'  (string)
  pci.device_class = 2  (0x2)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 0  (0x0)  (int)
  pci.freebsd.bus = 1  (0x1)  (int)
  pci.freebsd.device = 4  (0x4)  (int)
  pci.freebsd.function = 0  (0x0)  (int)
  pci.freebsd.secondary_bus = 0  (0x0)  (int)
  pci.product = '3c905C-TX/TX-M [Tornado]'  (string)
  pci.product_id = 37376  (0x9200)  (int)
  pci.subsys_product_id = 4678  (0x1246)  (int)
  pci.subsys_vendor = 'Hewlett-Packard Company'  (string)
  pci.subsys_vendor_id = 4156  (0x103c)  (int)
  pci.vendor = '3Com Corporation'  (string)
  pci.vendor_id = 4279  (0x10b7)  (int)

udi = '/org/freedesktop/Hal/devices/net_00_04_75_50_68_48'
  info.capabilities = {'net', 'net.80203', 'wake_on_lan'} (string list)
  info.category = 'net.80203'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.WakeOnLan'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/pci_10b7_9200'  (string)
  info.product = 'Networking Interface'  (string)
  info.udi = '/org/freedesktop/Hal/devices/net_00_04_75_50_68_48'  (string)
  net.80203.link = true  (bool)
  net.80203.mac_address = 19148073032  (0x475506848)  (uint64)
  net.80203.rate = 100000000  (0x5f5e100)  (uint64)
  net.address = '00:04:75:50:68:48'  (string)
  net.arp_proto_hw_id = 1  (0x1)  (int)
  net.freebsd.ifindex = 1  (0x1)  (int)
  net.interface = 'xl0'  (string)
  net.interface_up = true  (bool)
  net.media = 'Ethernet autoselect (100baseTX <full-duplex>)'  (string)
  net.originating_device = '/org/freedesktop/Hal/devices/pci_10b7_9200'
(string)
  net.physical_device = '/org/freedesktop/Hal/devices/pci_10b7_9200'
(string)
  org.freedesktop.Hal.Device.WakeOnLan.method_argnames = {'', '', 'enable'}
(string list)
  org.freedesktop.Hal.Device.WakeOnLan.method_execpaths =
{'hal-system-wol-supported', 'hal-system-wol-enabled',
'hal-system-wol-enable'} (string list)
  org.freedesktop.Hal.Device.WakeOnLan.method_names = {'GetSupported',
'GetEnabled', 'SetEnabled'} (string list)
  org.freedesktop.Hal.Device.WakeOnLan.method_signatures = {'', '', 'b'}
(string list)

udi = '/org/freedesktop/Hal/devices/pci_8086_2410'
  freebsd.driver = 'isab'  (string)
  freebsd.unit = 0  (0x0)  (int)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801AA ISA Bridge (LPC)'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2410'  (string)
  info.vendor = 'Intel Corporation'  (string)
  pci.device_class = 6  (0x6)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 1  (0x1)  (int)
  pci.freebsd.bus = 0  (0x0)  (int)
  pci.freebsd.device = 31  (0x1f)  (int)
  pci.freebsd.function = 0  (0x0)  (int)
  pci.freebsd.secondary_bus = 0  (0x0)  (int)
  pci.product = '82801AA ISA Bridge (LPC)'  (string)
  pci.product_id = 9232  (0x2410)  (int)
  pci.subsys_product_id = 0  (0x0)  (int)
  pci.subsys_vendor_id = 0  (0x0)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_2411'
  freebsd.driver = 'atapci'  (string)
  freebsd.unit = 0  (0x0)  (int)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801AA IDE Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2411'  (string)
  info.vendor = 'Intel Corporation'  (string)
  pci.device_class = 1  (0x1)  (int)
  pci.device_protocol = 128  (0x80)  (int)
  pci.device_subclass = 1  (0x1)  (int)
  pci.freebsd.bus = 0  (0x0)  (int)
  pci.freebsd.device = 31  (0x1f)  (int)
  pci.freebsd.function = 1  (0x1)  (int)
  pci.freebsd.secondary_bus = 0  (0x0)  (int)
  pci.product = '82801AA IDE Controller'  (string)
  pci.product_id = 9233  (0x2411)  (int)
  pci.subsys_product_id = 9233  (0x2411)  (int)
  pci.subsys_vendor = 'Intel Corporation'  (string)
  pci.subsys_vendor_id = 32902  (0x8086)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/ide_host_0'
  freebsd.driver = 'ata'  (string)
  freebsd.unit = 0  (0x0)  (int)
  ide_host.number = 0  (0x0)  (int)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2411'  (string)
  info.product = 'ATA channel 0'  (string)
  info.subsystem = 'ide_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/ide_host_0'  (string)

udi = '/org/freedesktop/Hal/devices/ide_host_0_scsi_host'
  info.parent = '/org/freedesktop/Hal/devices/ide_host_0'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/ide_host_0_scsi_host'  (string)
  scsi_host.host = 0  (0x0)  (int)

udi = '/org/freedesktop/Hal/devices/ide_0_0'
  ide.channel = 0  (0x0)  (int)
  ide.host = 0  (0x0)  (int)
  info.parent = '/org/freedesktop/Hal/devices/ide_host_0'  (string)
  info.product = 'IDE Device (Master)'  (string)
  info.subsystem = 'ide'  (string)
  info.udi = '/org/freedesktop/Hal/devices/ide_0_0'  (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_T3RF618C'
  block.device = '/dev/ad0'  (string)
  block.is_volume = false  (bool)
  block.major = 0  (0x0)  (int)
  block.minor = 85  (0x55)  (int)
  block.storage_device =
'/org/freedesktop/Hal/devices/storage_serial_T3RF618C'  (string)
  freebsd.device_file = '/dev/ad0'  (string)
  freebsd.driver = 'ad'  (string)
  freebsd.unit = 0  (0x0)  (int)
  info.capabilities = {'block', 'storage'} (string list)
  info.category = 'storage'  (string)
  info.parent = '/org/freedesktop/Hal/devices/ide_0_0'  (string)
  info.product = 'Maxtor 5T030H3'  (string)
  info.subsystem = 'block'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_serial_T3RF618C'
(string)
  info.vendor = 'Maxtor'  (string)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'ide'  (string)
  storage.drive_type = 'disk'  (string)
  storage.firmware_revision = 'TAH71DP0'  (string)
  storage.hotpluggable = false  (bool)
  storage.media_check_enabled = false  (bool)
  storage.model = 'Maxtor 5T030H3'  (string)
  storage.no_partitions_hint = false  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/ide_0_0'
(string)
  storage.removable = false  (bool)
  storage.removable.support_async_notification = false  (bool)
  storage.requires_eject = false  (bool)
  storage.serial = 'T3RF618C'  (string)
  storage.vendor = 'Maxtor'  (string)

udi = '/org/freedesktop/Hal/devices/volume_part2_size_30735548928'
  block.device = '/dev/ad0s1'  (string)
  block.is_volume = true  (bool)
  block.major = 0  (0x0)  (int)
  block.minor = 88  (0x58)  (int)
  block.storage_device =
'/org/freedesktop/Hal/devices/storage_serial_T3RF618C'  (string)
  info.capabilities = {'block', 'volume'} (string list)
  info.category = 'volume'  (string)
  info.parent = '/org/freedesktop/Hal/devices/storage_serial_T3RF618C'
(string)
  info.product = 'Volume'  (string)
  info.subsystem = 'block'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_part2_size_30735548928'
(string)
  volume.block_size = 512  (0x200)  (uint64)
  volume.fstype = ''  (string)
  volume.fsusage = 'partitiontable'  (string)
  volume.ignore = true  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = true  (bool)
  volume.label = ''  (string)
  volume.mount_point = ''  (string)
  volume.num_blocks = 60030369  (0x393fda1)  (uint64)
  volume.partition.media_size = 30735548928  (0x727fb4200)  (uint64)
  volume.partition.number = 2  (0x2)  (int)
  volume.partition.scheme = 'mbr'  (string)
  volume.partition.start = 32256  (0x7e00)  (uint64)
  volume.partition.type = '0x0'  (string)
  volume.size = 30735548928  (0x727fb4200)  (uint64)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_size_2147483648'
  block.device = '/dev/ad0s1a'  (string)
  block.is_volume = true  (bool)
  block.major = 0  (0x0)  (int)
  block.minor = 89  (0x59)  (int)
  block.storage_device =
'/org/freedesktop/Hal/devices/storage_serial_T3RF618C'  (string)
  info.capabilities = {'block', 'volume'} (string list)
  info.category = 'volume'  (string)
  info.parent =
'/org/freedesktop/Hal/devices/volume_part2_size_30735548928'  (string)
  info.product = 'Volume'  (string)
  info.subsystem = 'block'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_size_2147483648'  (string)
  volume.block_size = 512  (0x200)  (uint64)
  volume.fstype = ''  (string)
  volume.fsusage = 'partitiontable'  (string)
  volume.ignore = true  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = false  (bool)
  volume.label = ''  (string)
  volume.mount_point = ''  (string)
  volume.num_blocks = 4194304  (0x400000)  (uint64)
  volume.size = 2147483648  (0x80000000)  (uint64)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_size_2147483136'
  block.device = '/dev/label/rootfs0'  (string)
  block.is_volume = true  (bool)
  block.major = 0  (0x0)  (int)
  block.minor = 93  (0x5d)  (int)
  block.storage_device =
'/org/freedesktop/Hal/devices/storage_serial_T3RF618C'  (string)
  info.capabilities = {'block', 'volume'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/volume_size_2147483648'
(string)
  info.product = 'Volume (ufs)'  (string)
  info.subsystem = 'block'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_size_2147483136'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype
extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount',
'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount',
'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'}
(string list)
  volume.block_size = 512  (0x200)  (uint64)
  volume.freebsd.ufsid = '4b4a170c304b7164'  (string)
  volume.fstype = 'ufs'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = '2'  (string)
  volume.ignore = false  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = true  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = false  (bool)
  volume.label = ''  (string)
  volume.mount.valid_options = {'ro', 'noexec', 'noatime'} (string list)
  volume.mount_point = '/'  (string)
  volume.num_blocks = 4194303  (0x3fffff)  (uint64)
  volume.size = 2147483136  (0x7ffffe00)  (uint64)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_size_1071644672'
  block.device = '/dev/ad0s1b'  (string)
  block.is_volume = true  (bool)
  block.major = 0  (0x0)  (int)
  block.minor = 90  (0x5a)  (int)
  block.storage_device =
'/org/freedesktop/Hal/devices/storage_serial_T3RF618C'  (string)
  info.capabilities = {'block', 'volume'} (string list)
  info.category = 'volume'  (string)
  info.parent =
'/org/freedesktop/Hal/devices/volume_part2_size_30735548928'  (string)
  info.product = 'Volume'  (string)
  info.subsystem = 'block'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_size_1071644672'  (string)
  volume.block_size = 512  (0x200)  (uint64)
  volume.fstype = ''  (string)
  volume.fsusage = 'partitiontable'  (string)
  volume.ignore = true  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = false  (bool)
  volume.label = ''  (string)
  volume.mount_point = ''  (string)
  volume.num_blocks = 2093056  (0x1ff000)  (uint64)
  volume.size = 1071644672  (0x3fe00000)  (uint64)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_size_1071644160'
  block.device = '/dev/label/swap0'  (string)
  block.is_volume = true  (bool)
  block.major = 0  (0x0)  (int)
  block.minor = 95  (0x5f)  (int)
  block.storage_device =
'/org/freedesktop/Hal/devices/storage_serial_T3RF618C'  (string)
  info.capabilities = {'block', 'volume'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/volume_size_1071644672'
(string)
  info.product = 'Volume (ufs)'  (string)
  info.subsystem = 'block'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_size_1071644160'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype
extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount',
'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount',
'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'}
(string list)
  volume.block_size = 512  (0x200)  (uint64)
  volume.fstype = 'ufs'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = '2'  (string)
  volume.ignore = false  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = false  (bool)
  volume.label = ''  (string)
  volume.mount.valid_options = {'ro', 'noexec', 'noatime'} (string list)
  volume.mount_point = ''  (string)
  volume.num_blocks = 2093055  (0x1fefff)  (uint64)
  volume.size = 1071644160  (0x3fdffe00)  (uint64)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_size_1073741824'
  block.device = '/dev/ad0s1d'  (string)
  block.is_volume = true  (bool)
  block.major = 0  (0x0)  (int)
  block.minor = 91  (0x5b)  (int)
  block.storage_device =
'/org/freedesktop/Hal/devices/storage_serial_T3RF618C'  (string)
  info.capabilities = {'block', 'volume'} (string list)
  info.category = 'volume'  (string)
  info.parent =
'/org/freedesktop/Hal/devices/volume_part2_size_30735548928'  (string)
  info.product = 'Volume'  (string)
  info.subsystem = 'block'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_size_1073741824'  (string)
  volume.block_size = 512  (0x200)  (uint64)
  volume.fstype = ''  (string)
  volume.fsusage = 'partitiontable'  (string)
  volume.ignore = true  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = false  (bool)
  volume.label = ''  (string)
  volume.mount_point = ''  (string)
  volume.num_blocks = 2097152  (0x200000)  (uint64)
  volume.size = 1073741824  (0x40000000)  (uint64)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_size_1073741312'
  block.device = '/dev/label/var0'  (string)
  block.is_volume = true  (bool)
  block.major = 0  (0x0)  (int)
  block.minor = 96  (0x60)  (int)
  block.storage_device =
'/org/freedesktop/Hal/devices/storage_serial_T3RF618C'  (string)
  info.capabilities = {'block', 'volume'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/volume_size_1073741824'
(string)
  info.product = 'Volume (ufs)'  (string)
  info.subsystem = 'block'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_size_1073741312'  (string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype
extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount',
'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount',
'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'}
(string list)
  volume.block_size = 512  (0x200)  (uint64)
  volume.freebsd.ufsid = '4b4a1714b7851771'  (string)
  volume.fstype = 'ufs'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = '2'  (string)
  volume.ignore = false  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = true  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = false  (bool)
  volume.label = ''  (string)
  volume.mount.valid_options = {'ro', 'noexec', 'noatime'} (string list)
  volume.mount_point = '/var'  (string)
  volume.num_blocks = 2097151  (0x1fffff)  (uint64)
  volume.size = 1073741312  (0x3ffffe00)  (uint64)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_size_26436698112'
  block.device = '/dev/ad0s1e'  (string)
  block.is_volume = true  (bool)
  block.major = 0  (0x0)  (int)
  block.minor = 92  (0x5c)  (int)
  block.storage_device =
'/org/freedesktop/Hal/devices/storage_serial_T3RF618C'  (string)
  info.capabilities = {'block', 'volume'} (string list)
  info.category = 'volume'  (string)
  info.parent =
'/org/freedesktop/Hal/devices/volume_part2_size_30735548928'  (string)
  info.product = 'Volume'  (string)
  info.subsystem = 'block'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_size_26436698112'
(string)
  volume.block_size = 512  (0x200)  (uint64)
  volume.fstype = ''  (string)
  volume.fsusage = 'partitiontable'  (string)
  volume.ignore = true  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = false  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = false  (bool)
  volume.label = ''  (string)
  volume.mount_point = ''  (string)
  volume.num_blocks = 51634176  (0x313e000)  (uint64)
  volume.size = 26436698112  (0x627c00000)  (uint64)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/volume_size_26436697600'
  block.device = '/dev/label/usr0'  (string)
  block.is_volume = true  (bool)
  block.major = 0  (0x0)  (int)
  block.minor = 98  (0x62)  (int)
  block.storage_device =
'/org/freedesktop/Hal/devices/storage_serial_T3RF618C'  (string)
  info.capabilities = {'block', 'volume'} (string list)
  info.category = 'volume'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Volume'} (string list)
  info.parent = '/org/freedesktop/Hal/devices/volume_size_26436698112'
(string)
  info.product = 'Volume (ufs)'  (string)
  info.subsystem = 'block'  (string)
  info.udi = '/org/freedesktop/Hal/devices/volume_size_26436697600'
(string)
  org.freedesktop.Hal.Device.Volume.method_argnames = {'mount_point fstype
extra_options', 'extra_options', 'extra_options'} (string list)
  org.freedesktop.Hal.Device.Volume.method_execpaths = {'hal-storage-mount',
'hal-storage-unmount', 'hal-storage-eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_names = {'Mount', 'Unmount',
'Eject'} (string list)
  org.freedesktop.Hal.Device.Volume.method_signatures = {'ssas', 'as', 'as'}
(string list)
  volume.block_size = 512  (0x200)  (uint64)
  volume.freebsd.ufsid = '4b4a171bd70592cd'  (string)
  volume.fstype = 'ufs'  (string)
  volume.fsusage = 'filesystem'  (string)
  volume.fsversion = '2'  (string)
  volume.ignore = false  (bool)
  volume.is_disc = false  (bool)
  volume.is_mounted = true  (bool)
  volume.is_mounted_read_only = false  (bool)
  volume.is_partition = false  (bool)
  volume.label = ''  (string)
  volume.mount.valid_options = {'ro', 'noexec', 'noatime'} (string list)
  volume.mount_point = '/usr'  (string)
  volume.num_blocks = 51634175  (0x313dfff)  (uint64)
  volume.size = 26436697600  (0x627bffe00)  (uint64)
  volume.uuid = ''  (string)

udi = '/org/freedesktop/Hal/devices/ide_host_1'
  freebsd.driver = 'ata'  (string)
  freebsd.unit = 1  (0x1)  (int)
  ide_host.number = 1  (0x1)  (int)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2411'  (string)
  info.product = 'ATA channel 1'  (string)
  info.subsystem = 'ide_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/ide_host_1'  (string)

udi = '/org/freedesktop/Hal/devices/ide_host_1_scsi_host'
  info.parent = '/org/freedesktop/Hal/devices/ide_host_1'  (string)
  info.product = 'SCSI Host Adapter'  (string)
  info.subsystem = 'scsi_host'  (string)
  info.udi = '/org/freedesktop/Hal/devices/ide_host_1_scsi_host'  (string)
  scsi_host.host = 1  (0x1)  (int)

udi = '/org/freedesktop/Hal/devices/ide_host_1_scsi_host_scsi_device_lun0_0'
  info.parent = '/org/freedesktop/Hal/devices/ide_host_1_scsi_host'
(string)
  info.product = 'SCSI Device'  (string)
  info.subsystem = 'scsi'  (string)
  info.udi =
'/org/freedesktop/Hal/devices/ide_host_1_scsi_host_scsi_device_lun0_0'
(string)
  info.vendor = 'HP'  (string)
  scsi.bus = 1  (0x1)  (int)
  scsi.host = 1  (0x1)  (int)
  scsi.lun = 0  (0x0)  (int)
  scsi.model = 'DVD Writer 640c'  (string)
  scsi.target = 1  (0x1)  (int)
  scsi.type = 'cdrom'  (string)
  scsi.vendor = 'HP'  (string)

udi = '/org/freedesktop/Hal/devices/storage_model_DVD_Writer_640c'
  block.device = '/dev/cd1'  (string)
  block.freebsd.cam_path = '1,1,0'  (string)
  block.is_volume = false  (bool)
  block.major = 0  (0x0)  (int)
  block.minor = 104  (0x68)  (int)
  block.storage_device =
'/org/freedesktop/Hal/devices/storage_model_DVD_Writer_640c'  (string)
  freebsd.device_file = '/dev/cd1'  (string)
  freebsd.driver = 'cd'  (string)
  freebsd.unit = 1  (0x1)  (int)
  info.addons = {'hald-addon-storage'} (string list)
  info.capabilities = {'block', 'storage', 'storage.cdrom'} (string list)
  info.category = 'storage.cdrom'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Storage',
'org.freedesktop.Hal.Device.Storage',
'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
  info.parent =
'/org/freedesktop/Hal/devices/ide_host_1_scsi_host_scsi_device_lun0_0'
(string)
  info.product = 'DVD Writer 640c'  (string)
  info.subsystem = 'block'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_model_DVD_Writer_640c'
(string)
  info.vendor = 'HP'  (string)
  org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options',
'extra_options'} (string list)
  org.freedesktop.Hal.Device.Storage.method_execpaths =
{'hal-storage-eject', 'hal-storage-closetray'} (string list)
  org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'}
(string list)
  org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'}
(string list)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'scsi'  (string)
  storage.cdrom.bd = false  (bool)
  storage.cdrom.bdr = false  (bool)
  storage.cdrom.bdre = false  (bool)
  storage.cdrom.cdr = true  (bool)
  storage.cdrom.cdrw = true  (bool)
  storage.cdrom.dvd = true  (bool)
  storage.cdrom.dvdplusr = true  (bool)
  storage.cdrom.dvdplusrdl = true  (bool)
  storage.cdrom.dvdplusrw = true  (bool)
  storage.cdrom.dvdplusrwdl = false  (bool)
  storage.cdrom.dvdr = true  (bool)
  storage.cdrom.dvdram = false  (bool)
  storage.cdrom.dvdrw = false  (bool)
  storage.cdrom.hddvd = false  (bool)
  storage.cdrom.hddvdr = false  (bool)
  storage.cdrom.hddvdrw = false  (bool)
  storage.cdrom.read_speed = 7056  (0x1b90)  (int)
  storage.cdrom.support_media_changed = false  (bool)
  storage.cdrom.write_speed = 7056  (0x1b90)  (int)
  storage.cdrom.write_speeds = {'7056', '5645', '4234', '2822', '2117',
'1411'} (string list)
  storage.drive_type = 'cdrom'  (string)
  storage.firmware_revision = 'CS30'  (string)
  storage.hotpluggable = false  (bool)
  storage.lun = 0  (0x0)  (int)
  storage.media_check_enabled = true  (bool)
  storage.model = 'DVD Writer 640c'  (string)
  storage.no_partitions_hint = true  (bool)
  storage.originating_device =
'/org/freedesktop/Hal/devices/ide_host_1_scsi_host_scsi_device_lun0_0'
(string)
  storage.removable = true  (bool)
  storage.removable.media_available = false  (bool)
  storage.removable.support_async_notification = false  (bool)
  storage.requires_eject = true  (bool)
  storage.vendor = 'HP'  (string)

udi = '/org/freedesktop/Hal/devices/ide_host_1_scsi_host_scsi_device_lun0'
  info.parent = '/org/freedesktop/Hal/devices/ide_host_1_scsi_host'
(string)
  info.product = 'SCSI Device'  (string)
  info.subsystem = 'scsi'  (string)
  info.udi =
'/org/freedesktop/Hal/devices/ide_host_1_scsi_host_scsi_device_lun0'
(string)
  info.vendor = 'HITACHI'  (string)
  scsi.bus = 1  (0x1)  (int)
  scsi.host = 1  (0x1)  (int)
  scsi.lun = 0  (0x0)  (int)
  scsi.model = 'DVD-ROM GD-8000'  (string)
  scsi.target = 0  (0x0)  (int)
  scsi.type = 'cdrom'  (string)
  scsi.vendor = 'HITACHI'  (string)

udi = '/org/freedesktop/Hal/devices/storage_model_DVD_ROM_GD_8000'
  block.device = '/dev/cd0'  (string)
  block.freebsd.cam_path = '1,0,0'  (string)
  block.is_volume = false  (bool)
  block.major = 0  (0x0)  (int)
  block.minor = 102  (0x66)  (int)
  block.storage_device =
'/org/freedesktop/Hal/devices/storage_model_DVD_ROM_GD_8000'  (string)
  freebsd.device_file = '/dev/cd0'  (string)
  freebsd.driver = 'cd'  (string)
  freebsd.unit = 0  (0x0)  (int)
  info.addons = {'hald-addon-storage'} (string list)
  info.capabilities = {'block', 'storage', 'storage.cdrom'} (string list)
  info.category = 'storage.cdrom'  (string)
  info.interfaces = {'org.freedesktop.Hal.Device.Storage',
'org.freedesktop.Hal.Device.Storage',
'org.freedesktop.Hal.Device.Storage.Removable'} (string list)
  info.parent =
'/org/freedesktop/Hal/devices/ide_host_1_scsi_host_scsi_device_lun0'
(string)
  info.product = 'DVD-ROM GD-8000'  (string)
  info.subsystem = 'block'  (string)
  info.udi = '/org/freedesktop/Hal/devices/storage_model_DVD_ROM_GD_8000'
(string)
  info.vendor = 'HITACHI'  (string)
  org.freedesktop.Hal.Device.Storage.method_argnames = {'extra_options',
'extra_options'} (string list)
  org.freedesktop.Hal.Device.Storage.method_execpaths =
{'hal-storage-eject', 'hal-storage-closetray'} (string list)
  org.freedesktop.Hal.Device.Storage.method_names = {'Eject', 'CloseTray'}
(string list)
  org.freedesktop.Hal.Device.Storage.method_signatures = {'as', 'as'}
(string list)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'scsi'  (string)
  storage.cdrom.bd = false  (bool)
  storage.cdrom.bdr = false  (bool)
  storage.cdrom.bdre = false  (bool)
  storage.cdrom.cdr = false  (bool)
  storage.cdrom.cdrw = false  (bool)
  storage.cdrom.dvd = true  (bool)
  storage.cdrom.dvdplusr = false  (bool)
  storage.cdrom.dvdplusrdl = false  (bool)
  storage.cdrom.dvdplusrw = false  (bool)
  storage.cdrom.dvdplusrwdl = false  (bool)
  storage.cdrom.dvdr = false  (bool)
  storage.cdrom.dvdram = false  (bool)
  storage.cdrom.dvdrw = false  (bool)
  storage.cdrom.hddvd = false  (bool)
  storage.cdrom.hddvdr = false  (bool)
  storage.cdrom.hddvdrw = false  (bool)
  storage.cdrom.read_speed = 7056  (0x1b90)  (int)
  storage.cdrom.support_media_changed = false  (bool)
  storage.cdrom.write_speed = 0  (0x0)  (int)
  storage.drive_type = 'cdrom'  (string)
  storage.firmware_revision = '0008'  (string)
  storage.hotpluggable = false  (bool)
  storage.lun = 0  (0x0)  (int)
  storage.media_check_enabled = true  (bool)
  storage.model = 'DVD-ROM GD-8000'  (string)
  storage.no_partitions_hint = true  (bool)
  storage.originating_device =
'/org/freedesktop/Hal/devices/ide_host_1_scsi_host_scsi_device_lun0'
(string)
  storage.removable = true  (bool)
  storage.removable.media_available = false  (bool)
  storage.removable.support_async_notification = false  (bool)
  storage.requires_eject = true  (bool)
  storage.vendor = 'HITACHI'  (string)

udi = '/org/freedesktop/Hal/devices/ide_1_1'
  ide.channel = 1  (0x1)  (int)
  ide.host = 1  (0x1)  (int)
  info.parent = '/org/freedesktop/Hal/devices/ide_host_1'  (string)
  info.product = 'IDE Device (Slave)'  (string)
  info.subsystem = 'ide'  (string)
  info.udi = '/org/freedesktop/Hal/devices/ide_1_1'  (string)

udi = '/org/freedesktop/Hal/devices/storage_serial_CNL307252C'
  block.device = '/dev/acd1'  (string)
  block.freebsd.atapi_cam_device = '/dev/cd1'  (string)
  block.freebsd.cam_path = '1,1,0'  (string)
  block.is_volume = false  (bool)
  block.major = 0  (0x0)  (int)
  block.minor = 87  (0x57)  (int)
  block.storage_device =
'/org/freedesktop/Hal/devices/storage_serial_CNL307252C'  (string)
  freebsd.device_file = '/dev/acd1'  (string)
  freebsd.driver = 'acd'  (string)
  freebsd.unit = 1  (0x1)  (int)
  info.ignore = true  (bool)
  info.parent = '/org/freedesktop/Hal/devices/ide_1_1'  (string)
  info.product = 'Ignored Device'  (string)
  info.subsystem = 'block'  (string)
  info.udi = '/org/freedesktop/Hal/devices/ignored-device'  (string)
  info.vendor = 'HP'  (string)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'ide'  (string)
  storage.cdrom.bd = false  (bool)
  storage.cdrom.bdr = false  (bool)
  storage.cdrom.bdre = false  (bool)
  storage.cdrom.cdr = false  (bool)
  storage.cdrom.cdrw = false  (bool)
  storage.cdrom.dvd = false  (bool)
  storage.cdrom.dvdplusr = false  (bool)
  storage.cdrom.dvdplusrdl = false  (bool)
  storage.cdrom.dvdplusrw = false  (bool)
  storage.cdrom.dvdplusrwdl = false  (bool)
  storage.cdrom.dvdr = false  (bool)
  storage.cdrom.dvdram = false  (bool)
  storage.cdrom.dvdrw = false  (bool)
  storage.cdrom.hddvd = false  (bool)
  storage.cdrom.hddvdr = false  (bool)
  storage.cdrom.hddvdrw = false  (bool)
  storage.cdrom.read_speed = 0  (0x0)  (int)
  storage.cdrom.support_media_changed = false  (bool)
  storage.cdrom.write_speed = 0  (0x0)  (int)
  storage.drive_type = 'cdrom'  (string)
  storage.firmware_revision = 'CS30'  (string)
  storage.hotpluggable = false  (bool)
  storage.media_check_enabled = true  (bool)
  storage.model = 'HP DVD Writer 640'  (string)
  storage.no_partitions_hint = true  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/ide_1_1'
(string)
  storage.removable = true  (bool)
  storage.removable.support_async_notification = false  (bool)
  storage.requires_eject = true  (bool)
  storage.serial = 'CNL307252C'  (string)
  storage.vendor = 'HP'  (string)

udi = '/org/freedesktop/Hal/devices/ide_1_0'
  ide.channel = 0  (0x0)  (int)
  ide.host = 1  (0x1)  (int)
  info.parent = '/org/freedesktop/Hal/devices/ide_host_1'  (string)
  info.product = 'IDE Device (Master)'  (string)
  info.subsystem = 'ide'  (string)
  info.udi = '/org/freedesktop/Hal/devices/ide_1_0'  (string)

udi = '/org/freedesktop/Hal/devices/storage_model_HITACHI_DVD_ROM_GD_8000'
  block.device = '/dev/acd0'  (string)
  block.freebsd.atapi_cam_device = '/dev/cd0'  (string)
  block.freebsd.cam_path = '1,0,0'  (string)
  block.is_volume = false  (bool)
  block.major = 0  (0x0)  (int)
  block.minor = 86  (0x56)  (int)
  block.storage_device =
'/org/freedesktop/Hal/devices/storage_model_HITACHI_DVD_ROM_GD_8000'
(string)
  freebsd.device_file = '/dev/acd0'  (string)
  freebsd.driver = 'acd'  (string)
  freebsd.unit = 0  (0x0)  (int)
  info.ignore = true  (bool)
  info.parent = '/org/freedesktop/Hal/devices/ide_1_0'  (string)
  info.product = 'Ignored Device'  (string)
  info.subsystem = 'block'  (string)
  info.udi = '/org/freedesktop/Hal/devices/ignored-device'  (string)
  info.vendor = 'HITACHI'  (string)
  storage.automount_enabled_hint = true  (bool)
  storage.bus = 'ide'  (string)
  storage.cdrom.bd = false  (bool)
  storage.cdrom.bdr = false  (bool)
  storage.cdrom.bdre = false  (bool)
  storage.cdrom.cdr = false  (bool)
  storage.cdrom.cdrw = false  (bool)
  storage.cdrom.dvd = false  (bool)
  storage.cdrom.dvdplusr = false  (bool)
  storage.cdrom.dvdplusrdl = false  (bool)
  storage.cdrom.dvdplusrw = false  (bool)
  storage.cdrom.dvdplusrwdl = false  (bool)
  storage.cdrom.dvdr = false  (bool)
  storage.cdrom.dvdram = false  (bool)
  storage.cdrom.dvdrw = false  (bool)
  storage.cdrom.hddvd = false  (bool)
  storage.cdrom.hddvdr = false  (bool)
  storage.cdrom.hddvdrw = false  (bool)
  storage.cdrom.read_speed = 0  (0x0)  (int)
  storage.cdrom.support_media_changed = false  (bool)
  storage.cdrom.write_speed = 0  (0x0)  (int)
  storage.drive_type = 'cdrom'  (string)
  storage.firmware_revision = '0008'  (string)
  storage.hotpluggable = false  (bool)
  storage.media_check_enabled = true  (bool)
  storage.model = 'HITACHI DVD-ROM GD-8000'  (string)
  storage.no_partitions_hint = true  (bool)
  storage.originating_device = '/org/freedesktop/Hal/devices/ide_1_0'
(string)
  storage.removable = true  (bool)
  storage.removable.support_async_notification = false  (bool)
  storage.requires_eject = true  (bool)
  storage.vendor = 'HITACHI'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_2412'
  freebsd.driver = 'uhci'  (string)
  freebsd.unit = 0  (0x0)  (int)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801AA USB Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2412'  (string)
  info.vendor = 'Intel Corporation'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 3  (0x3)  (int)
  pci.freebsd.bus = 0  (0x0)  (int)
  pci.freebsd.device = 31  (0x1f)  (int)
  pci.freebsd.function = 2  (0x2)  (int)
  pci.freebsd.secondary_bus = 0  (0x0)  (int)
  pci.product = '82801AA USB Controller'  (string)
  pci.product_id = 9234  (0x2412)  (int)
  pci.subsys_product_id = 9234  (0x2412)  (int)
  pci.subsys_vendor = 'Intel Corporation'  (string)
  pci.subsys_vendor_id = 32902  (0x8086)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/usbus_0'
  freebsd.driver = 'usbus'  (string)
  freebsd.unit = 0  (0x0)  (int)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2412'  (string)
  info.product = 'Intel 82801AA (ICH) USB controller'  (string)
  info.subsystem = 'platform'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usbus_0'  (string)
  platform.id = 'usbus.0'  (string)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial'
  info.bus = 'usb_device'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usbus_0'  (string)
  info.product = 'UHCI root HUB'  (string)
  info.subsystem = 'usb_device'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial'
(string)
  info.vendor = 'Intel'  (string)
  usb_device.bus_number = 0  (0x0)  (int)
  usb_device.can_wake_up = false  (bool)
  usb_device.configuration = ''  (string)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 256  (0x100)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.level_number = 0  (0x0)  (int)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 0  (0x0)  (int)
  usb_device.port_number = 1  (0x1)  (int)
  usb_device.product = 'UHCI root HUB'  (string)
  usb_device.product_id = 0  (0x0)  (int)
  usb_device.serial = ''  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.speed_bcd = 4608  (0x1200)  (int)
  usb_device.vendor = 'Intel'  (string)
  usb_device.vendor_id = 0  (0x0)  (int)
  usb_device.version = 1.0 (1) (double)

udi = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_if0'
  freebsd.driver = 'uhub'  (string)
  freebsd.unit = 0  (0x0)  (int)
  info.bus = 'usb'  (string)
  info.parent = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial'
(string)
  info.product = 'UHCI root HUB'  (string)
  info.subsystem = 'usb'  (string)
  info.udi = '/org/freedesktop/Hal/devices/usb_device_0_0_noserial_if0'
(string)
  info.vendor = 'Intel'  (string)
  usb.freebsd.devname = 'uhub0'  (string)
  usb.interface.class = 9  (0x9)  (int)
  usb.interface.description = ''  (string)
  usb.interface.number = 0  (0x0)  (int)
  usb.interface.protocol = 0  (0x0)  (int)
  usb.interface.subclass = 0  (0x0)  (int)
  usb_device.bus_number = 0  (0x0)  (int)
  usb_device.can_wake_up = false  (bool)
  usb_device.configuration = ''  (string)
  usb_device.configuration_value = 1  (0x1)  (int)
  usb_device.device_class = 9  (0x9)  (int)
  usb_device.device_protocol = 0  (0x0)  (int)
  usb_device.device_revision_bcd = 256  (0x100)  (int)
  usb_device.device_subclass = 0  (0x0)  (int)
  usb_device.is_self_powered = true  (bool)
  usb_device.level_number = 0  (0x0)  (int)
  usb_device.max_power = 0  (0x0)  (int)
  usb_device.num_configurations = 1  (0x1)  (int)
  usb_device.num_interfaces = 1  (0x1)  (int)
  usb_device.num_ports = 0  (0x0)  (int)
  usb_device.port_number = 1  (0x1)  (int)
  usb_device.product = 'UHCI root HUB'  (string)
  usb_device.product_id = 0  (0x0)  (int)
  usb_device.serial = ''  (string)
  usb_device.speed = 12.0 (12) (double)
  usb_device.speed_bcd = 4608  (0x1200)  (int)
  usb_device.vendor = 'Intel'  (string)
  usb_device.vendor_id = 0  (0x0)  (int)
  usb_device.version = 1.0 (1) (double)

udi = '/org/freedesktop/Hal/devices/pci_8086_2413'
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801AA SMBus Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2413'  (string)
  info.vendor = 'Intel Corporation'  (string)
  pci.device_class = 12  (0xc)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 5  (0x5)  (int)
  pci.freebsd.bus = 0  (0x0)  (int)
  pci.freebsd.device = 31  (0x1f)  (int)
  pci.freebsd.function = 3  (0x3)  (int)
  pci.freebsd.secondary_bus = 0  (0x0)  (int)
  pci.product = '82801AA SMBus Controller'  (string)
  pci.product_id = 9235  (0x2413)  (int)
  pci.subsys_product_id = 9235  (0x2413)  (int)
  pci.subsys_vendor = 'Intel Corporation'  (string)
  pci.subsys_vendor_id = 32902  (0x8086)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_2415'
  freebsd.driver = 'pcm'  (string)
  freebsd.unit = 0  (0x0)  (int)
  info.parent = '/org/freedesktop/Hal/devices/computer'  (string)
  info.product = '82801AA AC'97 Audio Controller'  (string)
  info.subsystem = 'pci'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2415'  (string)
  info.vendor = 'Intel Corporation'  (string)
  pci.device_class = 4  (0x4)  (int)
  pci.device_protocol = 0  (0x0)  (int)
  pci.device_subclass = 1  (0x1)  (int)
  pci.freebsd.bus = 0  (0x0)  (int)
  pci.freebsd.device = 31  (0x1f)  (int)
  pci.freebsd.function = 5  (0x5)  (int)
  pci.freebsd.secondary_bus = 0  (0x0)  (int)
  pci.product = '82801AA AC'97 Audio Controller'  (string)
  pci.product_id = 9237  (0x2415)  (int)
  pci.subsys_product_id = 4681  (0x1249)  (int)
  pci.subsys_vendor = 'Hewlett-Packard Company'  (string)
  pci.subsys_vendor_id = 4156  (0x103c)  (int)
  pci.vendor = 'Intel Corporation'  (string)
  pci.vendor_id = 32902  (0x8086)  (int)

udi = '/org/freedesktop/Hal/devices/pci_8086_2415_oss_mixer_0'
  info.capabilities = {'oss'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2415'  (string)
  info.product = '82801AA AC'97 Audio Controller (mixer)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2415_oss_mixer_0'
(string)
  oss.card = 0  (0x0)  (int)
  oss.card_id = 'snd_ich [MPSAFE] (1p:4v/1r:4v channels duplex default)'
(string)
  oss.device = 0  (0x0)  (int)
  oss.device_file = '/dev/mixer0'  (string)
  oss.device_id = '82801AA AC'97 Audio Controller (mixer)'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_2415'
(string)
  oss.type = 'mixer'  (string)

udi = '/org/freedesktop/Hal/devices/pci_8086_2415_oss_pcm_0'
  info.capabilities = {'oss'} (string list)
  info.category = 'oss'  (string)
  info.parent = '/org/freedesktop/Hal/devices/pci_8086_2415'  (string)
  info.product = '82801AA AC'97 Audio Controller (pcm)'  (string)
  info.udi = '/org/freedesktop/Hal/devices/pci_8086_2415_oss_pcm_0'
(string)
  oss.card = 0  (0x0)  (int)
  oss.card_id = 'snd_ich [MPSAFE] (1p:4v/1r:4v channels duplex default)'
(string)
  oss.device = 0  (0x0)  (int)
  oss.device_file = '/dev/dsp0'  (string)
  oss.device_id = '82801AA AC'97 Audio Controller (pcm)'  (string)
  oss.originating_device = '/org/freedesktop/Hal/devices/pci_8086_2415'
(string)
  oss.type = 'pcm'  (string)


Dumped 49 device(s) from the Global Device List.
------------------------------------------------




>
> ------------------------------
>
> Message: 3
> Date: Sun, 10 Jan 2010 18:01:48 +0000
> From: Dru Lavigne <drulavigne at sympatico.ca>
> Subject: [PC-BSD Testing] some system settings issues
> To: <testing at lists.pcbsd.org>
> Message-ID: <BLU149-W283429F4B8C25AFC418EA8AC6E0 at phx.gbl>
> Content-Type: text/plain; charset="iso-8859-1"
>
>
>
> services manager is flaky: the Apply button stays greyed out and when you
> change a startup button the AutoStart column changes but it changes back if
> you close and reopen this module. Also, half of the services don't have the
> start/stop/restart buttons
>
> desktop search: strigi fails to initialize when you enable and apply. the
> error is: "Strigi service failed to initialize, most likely due to an
> installation problem." Manually starting /usr/local/bin/strigidaemon gives
> this error:
>
> DaemonConfigurator: created default config for indexed dirs
> WARNING: filed 'http://strigi.sf.net/ontologies/0.9#debugParseError' is
> not defined in any rdfs ontoogy database.
> Connection Error (Did not receive a reply. Possible causes include: the
> remote application did not send a reply, the message bus security policy
> blocked the reply, the reply timeout expired, or the network connection was
> broken.)
> Connection Null
>
> system settings -> login manager module: needs to prompt for admin password
> so options aren't greyed out
>
> system settings -> power management module: needs to prompt for admin
> password so can create power profiles. I started it using kdesu kcmshell4
> powerdevilconfig and received the following error:
>
> The configuration module can not be started, since there seems to be a
> problem with the PowerDevil Daemon. Read below for more details. PowerDevil
> seems not to be started. Either you have its service turned off, or there is
> a problem in D-Bus.
>
> Service Manager reports PowerDevil as running. I could not find a
> powerdevil daemon to manually start it (unless it is /usr/sbin/powerd?)
>
> Cheers,
>
> Dru
>
>
>
>
>
>
>
>
>
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://lists.pcbsd.org/pipermail/testing/attachments/20100110/a1c20567/attachment-0001.html
>
> ------------------------------
>
> Message: 4
> Date: Sun, 10 Jan 2010 13:51:21 -0500
> From: Ian Robinson <fitchkendall at gmail.com>
> Subject: Re: [PC-BSD Testing] Testing Digest, Vol 36, Issue 29
> To: testing at lists.pcbsd.org
> Message-ID:
>        <d241ea4c1001101051g136923d7hed20d1cd0cd4b6ae at mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Re:  Dru's question:
>
> >Does Dolphin admin-mode mount the floppy without the changes to fstab and
> devfs?
> >If so, I will advise users to use Dolphin-admin. If not, Kris needs to fix
> some config stuff :-)
> >Cheers,
> >
> >Dru
> >
>
> re: Brodey Dover's comment:
>
>  >When working it should be mounted to /media/floppy.
> >
> >Also, when working, your floppy should work akin to a USB device. I
> >don't think you should write up anything like updated fstab because you
> >would be writing a hack-around tutorial for something that is actually
> >broken.
> >
>  >Brodey
>
> I will revert back to the original configuration, test dolphi-admin, and
> report back soon.
>
> Ian Robinson
>
>
>
>
> ------------------------------
>
> _______________________________________________
> Testing mailing list
> Testing at lists.pcbsd.org
> http://lists.pcbsd.org/mailman/listinfo/testing
>
>
> End of Testing Digest, Vol 36, Issue 29
> ***************************************
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL:
> http://lists.pcbsd.org/pipermail/testing/attachments/20100110/20f518ec/attachment-0001.html
>
> ------------------------------
>
> _______________________________________________
> Testing mailing list
> Testing at lists.pcbsd.org
> http://lists.pcbsd.org/mailman/listinfo/testing
>
>
> End of Testing Digest, Vol 36, Issue 30
> ***************************************
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.pcbsd.org/pipermail/testing/attachments/20100110/3894f565/attachment-0001.html 


More information about the Testing mailing list