[PC-BSD Testing] Problems with the installation of 7.1RC1.

Arthur Koziol A-Koziol at neiu.edu
Mon Mar 30 07:08:23 PST 2009


>Eugeniy Khvastunov wrote:
> > Hello All!
> >
> > Problems with the installation of 7.1RC1.
> > Installation itself goes fine, but after a reboot starts 
> settingup X and ...
> >
> > I attach a screenshot of the moment (IMAGE_00007.jpg).
> >
> > Hare messages:
> > Mar 29 16:03:50 pcbsd syslogd: kernel boot file is /boot/kernel/kernel
> > Mar 29 16:03:50 pcbsd kernel: Copyright (c) 1992-2009 The FreeBSD Project.
> > Mar 29 16:03:50 pcbsd kernel: Copyright (c) 1979, 1980, 1983, 1986, 1988,
> > 1989, 1991, 1992, 1993, 1994
> > Mar 29 16:03:50 pcbsd kernel: The Regents of the University of California.
> > All rights reserved.
> > Mar 29 16:03:50 pcbsd kernel: FreeBSD is a registered trademark of The
> > FreeBSD Foundation.
> > Mar 29 16:03:50 pcbsd kernel: FreeBSD 7.2-PRERELEASE #9: Fri Mar 
> 20 18:29:01
> > EDT 2009
> > Mar 29 16:03:50 pcbsd kernel: root at pcbsdx32-7
> > :/usr/obj/pcbsd-build71/cvs/7.1-src/sys/PCBSD
> > Mar 29 16:03:50 pcbsd kernel: Timecounter "i8254" frequency 1193182 Hz
> > quality 0
> > Mar 29 16:03:50 pcbsd kernel: CPU: Intel(R) Pentium(R) D CPU 3.00GHz
> > (3010.67-MHz 686-class CPU)
> > Mar 29 16:03:50 pcbsd kernel: Origin = "GenuineIntel"  Id = 0xf47  Stepping
> > = 7
> > Mar 29 16:03:50 pcbsd kernel:
> > 
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
> > Mar 29 16:03:50 pcbsd kernel:
> > Features2=0x649d<SSE3,DTES64,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR>
> > Mar 29 16:03:50 pcbsd kernel: AMD Features=0x20000000<LM>
> > Mar 29 16:03:50 pcbsd kernel: AMD Features2=0x1<LAHF>
> > Mar 29 16:03:50 pcbsd kernel: Cores per package: 2
> > Mar 29 16:03:50 pcbsd kernel: real memory  = 2147024896 (2047 MB)
> > Mar 29 16:03:50 pcbsd kernel: avail memory = 2091319296 (1994 MB)
> > Mar 29 16:03:50 pcbsd kernel: ACPI APIC Table: <A_M_I_ OEMAPIC >
> > Mar 29 16:03:50 pcbsd kernel: FreeBSD/SMP: Multiprocessor System 
> Detected: 2
> > CPUs
> > Mar 29 16:03:50 pcbsd kernel: cpu0 (BSP): APIC ID:  0
> > Mar 29 16:03:50 pcbsd kernel: cpu1 (AP): APIC ID:  1
> > Mar 29 16:03:50 pcbsd kernel: ioapic0 <Version 2.0> irqs 0-23 on 
> motherboard
> > Mar 29 16:03:50 pcbsd kernel: kbd1 at kbdmux0
> > Mar 29 16:03:50 pcbsd kernel: acpi0: <A_M_I_ OEMRSDT> on motherboard
> > Mar 29 16:03:50 pcbsd kernel: acpi0: [ITHREAD]
> > Mar 29 16:03:50 pcbsd kernel: acpi0: Power Button (fixed)
> > Mar 29 16:03:50 pcbsd kernel: acpi0: reservation of 0, a0000 (3) failed
> > Mar 29 16:03:50 pcbsd kernel: acpi0: reservation of 100000, 7ff00000 (3)
> > failed
> > Mar 29 16:03:50 pcbsd kernel: Timecounter "ACPI-fast" frequency 3579545 Hz
> > quality 1000
> > Mar 29 16:03:50 pcbsd kernel: acpi_timer0: <24-bit timer at 3.579545MHz>
> > port 0x808-0x80b on acpi0
> > Mar 29 16:03:50 pcbsd kernel: acpi_hpet0: <High Precision Event 
> Timer> iomem
> > 0xfed00000-0xfed003ff on acpi0
> > Mar 29 16:03:50 pcbsd kernel: Timecounter "HPET" frequency 14318180 Hz
> > quality 900
> > Mar 29 16:03:50 pcbsd kernel: pcib0: <ACPI Host-PCI bridge> port 
> 0xcf8-0xcff
> > on acpi0
> > Mar 29 16:03:50 pcbsd kernel: pci0: <ACPI PCI bus> on pcib0
> > Mar 29 16:03:50 pcbsd kernel: pcib1: <ACPI PCI-PCI bridge> irq 16 at device
> > 1.0 on pci0
> > Mar 29 16:03:50 pcbsd kernel: pci4: <ACPI PCI bus> on pcib1
> > Mar 29 16:03:50 pcbsd kernel: vgapci0: <VGA-compatible display> port
> > 0xe000-0xe0ff mem 0xe0000000-0xefffffff,0xdffe0000-0xdffeffff irq 16 at
> > device 0.0 on pci4
> > Mar 29 16:03:50 pcbsd kernel: vgapci1: <VGA-compatible display> mem
> > 0xdfff0000-0xdfffffff at device 0.1 on pci4
> > Mar 29 16:03:50 pcbsd kernel: pci0: <multimedia, HDA> at device 27.0 (no
> > driver attached)
> > Mar 29 16:03:50 pcbsd kernel: pcib2: <ACPI PCI-PCI bridge> irq 16 at device
> > 28.0 on pci0
> > Mar 29 16:03:50 pcbsd kernel: pci3: <ACPI PCI bus> on pcib2
> > Mar 29 16:03:50 pcbsd kernel: pcib3: <ACPI PCI-PCI bridge> irq 19 at device
> > 28.3 on pci0
> > Mar 29 16:03:50 pcbsd kernel: pci2: <ACPI PCI bus> on pcib3
> > Mar 29 16:03:50 pcbsd kernel: re0: <RealTek
> > 8168/8168B/8168C/8168CP/8168D/8111B/8111C/8111CP PCIe Gigabit 
> Ethernet> port
> > 0xc800-0xc8ff mem 0xdfeff000-0xdfefffff irq 19 at device 0.0 on pci2
> > Mar 29 16:03:50 pcbsd kernel: re0: Using 1 MSI messages
> > Mar 29 16:03:50 pcbsd kernel: re0: Chip rev. 0x38000000
> > Mar 29 16:03:50 pcbsd kernel: re0: MAC rev. 0x00000000
> > Mar 29 16:03:50 pcbsd kernel: miibus0: <MII bus> on re0
> > Mar 29 16:03:50 pcbsd kernel: rgephy0: <RTL8169S/8110S/8211B media
> > interface> PHY 1 on miibus0
> > Mar 29 16:03:50 pcbsd kernel: rgephy0:  10baseT, 10baseT-FDX, 100baseTX,
> > 100baseTX-FDX, 1000baseT, 1000baseT-FDX, auto
> > Mar 29 16:03:50 pcbsd kernel: re0: Ethernet address: 00:17:31:5b:d0:7d
> > Mar 29 16:03:50 pcbsd kernel: re0: [FILTER]
> > Mar 29 16:03:50 pcbsd kernel: uhci0: <UHCI (generic) USB controller> port
> > 0x7000-0x701f irq 20 at device 29.0 on pci0
> > Mar 29 16:03:50 pcbsd kernel: uhci0: [GIANT-LOCKED]
> > Mar 29 16:03:50 pcbsd kernel: uhci0: [ITHREAD]
> > Mar 29 16:03:50 pcbsd kernel: usb0: <UHCI (generic) USB 
> controller> on uhci0
> > Mar 29 16:03:50 pcbsd kernel: usb0: USB revision 1.0
> > Mar 29 16:03:50 pcbsd kernel: uhub0: <Intel UHCI root hub, class 9/0, rev
> > 1.00/1.00, addr 1> on usb0
> > Mar 29 16:03:50 pcbsd kernel: uhub0: 2 ports with 2 removable, self powered
> > Mar 29 16:03:50 pcbsd kernel: uhci1: <UHCI (generic) USB controller> port
> > 0x7400-0x741f irq 17 at device 29.1 on pci0
> > Mar 29 16:03:50 pcbsd kernel: uhci1: [GIANT-LOCKED]
> > Mar 29 16:03:50 pcbsd kernel: uhci1: [ITHREAD]
> > Mar 29 16:03:50 pcbsd kernel: usb1: <UHCI (generic) USB 
> controller> on uhci1
> > Mar 29 16:03:50 pcbsd kernel: usb1: USB revision 1.0
> > Mar 29 16:03:50 pcbsd kernel: uhub1: <Intel UHCI root hub, class 9/0, rev
> > 1.00/1.00, addr 1> on usb1
> > Mar 29 16:03:50 pcbsd kernel: uhub1: 2 ports with 2 removable, self powered
> > Mar 29 16:03:50 pcbsd kernel: uhci2: <UHCI (generic) USB controller> port
> > 0x7800-0x781f irq 18 at device 29.2 on pci0
> > Mar 29 16:03:50 pcbsd kernel: uhci2: [GIANT-LOCKED]
> > Mar 29 16:03:50 pcbsd kernel: uhci2: [ITHREAD]
> > Mar 29 16:03:50 pcbsd kernel: usb2: <UHCI (generic) USB 
> controller> on uhci2
> > Mar 29 16:03:50 pcbsd kernel: usb2: USB revision 1.0
> > Mar 29 16:03:50 pcbsd kernel: uhub2: <Intel UHCI root hub, class 9/0, rev
> > 1.00/1.00, addr 1> on usb2
> > Mar 29 16:03:50 pcbsd kernel: uhub2: 2 ports with 2 removable, self powered
> > Mar 29 16:03:50 pcbsd kernel: uhci3: <UHCI (generic) USB controller> port
> > 0x8000-0x801f irq 19 at device 29.3 on pci0
> > Mar 29 16:03:50 pcbsd kernel: uhci3: [GIANT-LOCKED]
> > Mar 29 16:03:50 pcbsd kernel: uhci3: [ITHREAD]
> > Mar 29 16:03:50 pcbsd kernel: usb3: <UHCI (generic) USB 
> controller> on uhci3
> > Mar 29 16:03:50 pcbsd kernel: usb3: USB revision 1.0
> > Mar 29 16:03:50 pcbsd kernel: uhub3: <Intel UHCI root hub, class 9/0, rev
> > 1.00/1.00, addr 1> on usb3
> > Mar 29 16:03:50 pcbsd kernel: uhub3: 2 ports with 2 removable, self powered
> > Mar 29 16:03:50 pcbsd kernel: ehci0: <Intel 82801GB/R (ICH7) USB 2.0
> > controller> mem 0xdfcffc00-0xdfcfffff irq 20 at device 29.7 on pci0
> > Mar 29 16:03:50 pcbsd kernel: ehci0: [GIANT-LOCKED]
> > Mar 29 16:03:50 pcbsd kernel: ehci0: [ITHREAD]
> > Mar 29 16:03:50 pcbsd kernel: usb4: EHCI version 1.0
> > Mar 29 16:03:50 pcbsd kernel: usb4: companion controllers, 2 ports each:
> > usb0 usb1 usb2 usb3
> > Mar 29 16:03:50 pcbsd kernel: usb4: <Intel 82801GB/R (ICH7) USB 2.0
> > controller> on ehci0
> > Mar 29 16:03:50 pcbsd kernel: usb4: USB revision 2.0
> > Mar 29 16:03:50 pcbsd kernel: uhub4: <Intel EHCI root hub, class 9/0, rev
> > 2.00/1.00, addr 1> on usb4
> > Mar 29 16:03:50 pcbsd kernel: uhub4: 8 ports with 8 removable, self powered
> > Mar 29 16:03:50 pcbsd kernel: pcib4: <ACPI PCI-PCI bridge> at 
> device 30.0 on
> > pci0
> > Mar 29 16:03:50 pcbsd kernel: pci1: <ACPI PCI bus> on pcib4
> > Mar 29 16:03:50 pcbsd kernel: pci1: <simple comms> at device 1.0 (no driver
> > attached)
> > Mar 29 16:03:50 pcbsd kernel: pci1: <multimedia> at device 2.0 (no driver
> > attached)
> > Mar 29 16:03:50 pcbsd kernel: isab0: <PCI-ISA bridge> at device 
> 31.0 on pci0
> > Mar 29 16:03:50 pcbsd kernel: isa0: <ISA bus> on isab0
> > Mar 29 16:03:50 pcbsd kernel: atapci0: <Intel ICH7 UDMA100 controller> port
> > 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 31.1 on pci0
> > Mar 29 16:03:50 pcbsd kernel: ata0: <ATA channel 0> on atapci0
> > Mar 29 16:03:50 pcbsd kernel: ata0: [ITHREAD]
> > Mar 29 16:03:50 pcbsd kernel: atapci1: <Intel ICH7 SATA300 controller> port
> > 
> 0x9800-0x9807,0x9400-0x9403,0x9000-0x9007,0x8800-0x8803,0x8400-0x840f irq 23
> > at device 31.2 on pci0
> > Mar 29 16:03:50 pcbsd kernel: atapci1: [ITHREAD]
> > Mar 29 16:03:50 pcbsd kernel: ata2: <ATA channel 0> on atapci1
> > Mar 29 16:03:50 pcbsd kernel: ata2: [ITHREAD]
> > Mar 29 16:03:50 pcbsd kernel: ata3: <ATA channel 1> on atapci1
> > Mar 29 16:03:50 pcbsd kernel: ata3: [ITHREAD]
> > Mar 29 16:03:50 pcbsd kernel: pci0: <serial bus, SMBus> at device 31.3 (no
> > driver attached)
> > Mar 29 16:03:50 pcbsd kernel: acpi_button0: <Power Button> on acpi0
> > Mar 29 16:03:50 pcbsd kernel: fdc0: <floppy drive controller (FDE)> port
> > 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
> > Mar 29 16:03:50 pcbsd kernel: fdc0: [FILTER]
> > Mar 29 16:03:50 pcbsd kernel: fd0: <1440-KB 3.5" drive> on fdc0 drive 0
> > Mar 29 16:03:50 pcbsd kernel: atkbdc0: <Keyboard controller (i8042)> port
> > 0x60,0x64 irq 1 on acpi0
> > Mar 29 16:03:50 pcbsd kernel: atkbd0: <AT Keyboard> irq 1 on atkbdc0
> > Mar 29 16:03:50 pcbsd kernel: kbd0 at atkbd0
> > Mar 29 16:03:50 pcbsd kernel: atkbd0: [GIANT-LOCKED]
> > Mar 29 16:03:50 pcbsd kernel: atkbd0: [ITHREAD]
> > Mar 29 16:03:50 pcbsd kernel: psm0: <PS/2 Mouse> flags 0x1000 irq 12 on
> > atkbdc0
> > Mar 29 16:03:50 pcbsd kernel: psm0: [GIANT-LOCKED]
> > Mar 29 16:03:50 pcbsd kernel: psm0: [ITHREAD]
> > Mar 29 16:03:50 pcbsd kernel: psm0: model IntelliMouse, device ID 3
> > Mar 29 16:03:50 pcbsd kernel: sio0: <16550A-compatible COM port> port
> > 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> > Mar 29 16:03:50 pcbsd kernel: sio0: type 16550A
> > Mar 29 16:03:50 pcbsd kernel: sio0: [FILTER]
> > Mar 29 16:03:50 pcbsd kernel: cpu0: <ACPI CPU> on acpi0
> > Mar 29 16:03:50 pcbsd kernel: ACPI Warning (tbutils-0243): Incorrect
> > checksum in table [OEMB] -  8A, should be 7D [20070320]
> > Mar 29 16:03:50 pcbsd kernel: est0: <Enhanced SpeedStep Frequency Control>
> > on cpu0
> > Mar 29 16:03:50 pcbsd kernel: p4tcc0: <CPU Frequency Thermal Control> on
> > cpu0
> > Mar 29 16:03:50 pcbsd kernel: cpu1: <ACPI CPU> on acpi0
> > Mar 29 16:03:50 pcbsd kernel: est1: <Enhanced SpeedStep Frequency Control>
> > on cpu1
> > Mar 29 16:03:50 pcbsd kernel: p4tcc1: <CPU Frequency Thermal Control> on
> > cpu1
> > Mar 29 16:03:50 pcbsd kernel: pmtimer0 on isa0
> > Mar 29 16:03:50 pcbsd kernel: ppc0: <Parallel port> at port 0x378-0x37f irq
> > 7 on isa0
> > Mar 29 16:03:50 pcbsd kernel: ppc0: SMC-like chipset 
> (ECP/EPP/PS2/NIBBLE) in
> > COMPATIBLE mode
> > Mar 29 16:03:50 pcbsd kernel: ppc0: FIFO with 16/16/9 bytes threshold
> > Mar 29 16:03:50 pcbsd kernel: ppbus0: <Parallel port bus> on ppc0
> > Mar 29 16:03:50 pcbsd kernel: ppbus0: [ITHREAD]
> > Mar 29 16:03:50 pcbsd kernel: plip0: <PLIP network interface> on ppbus0
> > Mar 29 16:03:50 pcbsd kernel: plip0: WARNING: using obsoleted 
> IFF_NEEDSGIANT
> > flag
> > Mar 29 16:03:50 pcbsd kernel: lpt0: <Printer> on ppbus0
> > Mar 29 16:03:50 pcbsd kernel: lpt0: Interrupt-driven port
> > Mar 29 16:03:50 pcbsd kernel: ppi0: <Parallel I/O> on ppbus0
> > Mar 29 16:03:50 pcbsd kernel: ppc0: [GIANT-LOCKED]
> > Mar 29 16:03:50 pcbsd kernel: ppc0: [ITHREAD]
> > Mar 29 16:03:50 pcbsd kernel: sc0: <System console> at flags 0x100 on isa0
> > Mar 29 16:03:50 pcbsd kernel: sc0: VGA <16 virtual consoles, flags=0x300>
> > Mar 29 16:03:50 pcbsd kernel: sio1: configured irq 3 not in 
> bitmap of probed
> > irqs 0
> > Mar 29 16:03:50 pcbsd kernel: sio1: port may not be enabled
> > Mar 29 16:03:50 pcbsd kernel: vga0: <Generic ISA VGA> at port 0x3c0-0x3df
> > iomem 0xa0000-0xbffff on isa0
> > Mar 29 16:03:50 pcbsd kernel: uhub0: device problem (STALLED), disabling
> > port 1
> > Mar 29 16:03:50 pcbsd kernel: ugen0: <vendor 0x0c45 USB camera, class 0/0,
> > rev 1.10/1.01, addr 2> on uhub1
> > Mar 29 16:03:50 pcbsd kernel: Timecounters tick every 10.000 msec
> > Mar 29 16:03:50 pcbsd kernel: ipfw2 (+ipv6) initialized, divert 
> enabled, nat
> > loadable, rule-based forwarding disabled, default to accept, logging
> > disabled
> > Mar 29 16:03:50 pcbsd kernel: ad0: 76319MB <WDC WD800JD-00HKA0 13.03G13> at
> > ata2-master SATA150
> > Mar 29 16:03:50 pcbsd kernel: ad1: 476940MB <Seagate ST3500630AS 3.AAG> at
> > ata3-master SATA150
> > Mar 29 16:03:50 pcbsd kernel: acd0: DVDR <ASUS DRW-1814BLT/1.13> at
> > ata3-slave SATA150
> > Mar 29 16:03:50 pcbsd kernel: SMP: AP CPU #1 Launched!
> > Mar 29 16:03:50 pcbsd kernel: GEOM_LABEL: Label for provider ad1s1 is
> > ntfs/sys.
> > Mar 29 16:03:50 pcbsd kernel: GEOM_LABEL: Label for provider ad1s5 is
> > ntfs/SORAGE.
> > Mar 29 16:03:50 pcbsd kernel: Trying to mount root from ufs:/dev/ad0s1a
> > Mar 29 16:03:50 pcbsd kernel: acd0: FAILURE - INQUIRY ILLEGAL REQUEST
> > asc=0x24 ascq=0x00
> > Mar 29 16:03:50 pcbsd kernel: (probe0:ata2:0:1:0): TEST UNIT 
> READY. CDB: 0 0
> > 0 0 0 0
> > Mar 29 16:03:50 pcbsd kernel: (probe0:ata2:0:1:0): CAM Status: SCSI Status
> > Error
> > Mar 29 16:03:50 pcbsd kernel: (probe0:ata2:0:1:0): SCSI Status: Check
> > Condition
> > Mar 29 16:03:50 pcbsd kernel: (probe0:ata2:0:1:0): NOT READY asc:3a,1
> > Mar 29 16:03:50 pcbsd kernel: (probe0:ata2:0:1:0): Medium not 
> present - tray
> > closed
> > Mar 29 16:03:50 pcbsd kernel: (probe0:ata2:0:1:0): Unretryable error
> > Mar 29 16:03:50 pcbsd kernel: cd0 at ata2 bus 0 target 1 lun 0
> > Mar 29 16:03:50 pcbsd kernel: cd0: <ASUS DRW-1814BLT 1.13> Removable CD-ROM
> > SCSI-0 device
> > Mar 29 16:03:50 pcbsd kernel: cd0: 3.300MB/s transfers
> > Mar 29 16:03:50 pcbsd kernel: cd0: Attempt to query device size failed: NOT
> > READY, Medium not present - tray closed
> > Mar 29 16:03:50 pcbsd kernel: re0: link state changed to DOWN
> > Mar 29 16:03:50 pcbsd dhclient: New IP Address (re0): 192.168.253.3
> > Mar 29 16:03:50 pcbsd dhclient: New Subnet Mask (re0): 255.255.255.0
> > Mar 29 16:03:50 pcbsd dhclient: New Broadcast Address (re0): 
> 192.168.253.255
> > Mar 29 16:03:50 pcbsd dhclient: New Routers (re0): 192.168.253.1
> > Mar 29 16:03:50 pcbsd savecore: no dumps found
> > Mar 29 16:03:51 pcbsd kernel: hdac0: <Intel 82801G High Definition Audio
> > Controller> mem 0xdfcf8000-0xdfcfbfff irq 19 at device 27.0 on pci0
> > Mar 29 16:03:51 pcbsd kernel: hdac0: HDA Driver Revision: 20090131_0127
> > Mar 29 16:03:51 pcbsd kernel: hdac0: [ITHREAD]
> > Mar 29 16:03:51 pcbsd kernel: hdac0: HDA Codec #0: Analog Devices AD1986A
> > Mar 29 16:03:51 pcbsd kernel: hdac0: hdac_widget_connection_parse: nid=18
> > WARNING: zero cnid entnum=4 j=2 index=0 entries=8 found=2 res=0x21002211
> > Mar 29 16:03:51 pcbsd kernel: pcm0: <HDA Analog Devices AD1986A PCM #0
> > Analog> at cad 0 nid 1 on hdac0
> > Mar 29 16:03:51 pcbsd kernel: pcm1: <HDA Analog Devices AD1986A PCM #1
> > Digital> at cad 0 nid 1 on hdac0
> > Mar 29 16:03:52 pcbsd kernel: re0: link state changed to UP
> > Mar 29 16:03:54 pcbsd ntpd[1055]: ntpd 4.2.4p5-a Tue Mar 17 19:49:32 EDT
> > 2009 (1)
> > Mar 29 16:04:04 pcbsd kernel: drm0: <ATI Radeon R480 X850 Pro> on vgapci0
> > Mar 29 16:04:04 pcbsd kernel: vgapci0: child drm0 requested
> > pci_enable_busmaster
> > Mar 29 16:04:04 pcbsd kernel: info: [drm] Initialized radeon 
> 1.29.0 20080528
> > Mar 29 16:04:05 pcbsd kernel: info: [drm] Setting GART location 
> based on new
> > memory map
> > Mar 29 16:04:05 pcbsd kernel: info: [drm] Loading R400 Microcode
> > Mar 29 16:04:05 pcbsd kernel: info: [drm] Num pipes: 3
> > Mar 29 16:04:05 pcbsd kernel: info: [drm] writeback test succeeded in 1
> > usecs
> > Mar 29 16:04:05 pcbsd kernel: drm0: [ITHREAD]
> > Mar 29 16:04:12 pcbsd kernel: info: [drm] Num pipes: 3
> > Mar 29 16:04:21 pcbsd login: ROOT LOGIN (root) ON ttyv1
>
>Interesting, it almost looks like a bug in the ATI driver, its not
>rendering the window properly. You can try a few different things to fix
>this. First, you can try re-installing, and using the option to run
>installer in "vesa" mode during the boot-splash screen.
>
>Or you can boot up, go to the console Ctrl-F1, and edit this file:
>
>/PCBSD/xorg-gui/conf/xorg.conf.basic
>
>Look for the Device section, and change the driver from ati to "vesa"
>and then "shutdown -r now". When it reboots, it should use the vesa
>driver instead to bring up the Xorg GUI. Does that display normally again?

Is it possible this was fixed in the ATI driver 6.12.x series?

Arthur 



More information about the Testing mailing list