[PC-BSD Testing] Great, USB flash drives

Arthur Koziol A-Koziol at neiu.edu
Mon Jul 20 09:21:11 PDT 2009


USB works fine for me on 7.1.1 with multiple brands and sizes. Brodey 
are you using it via powered hub or directly plugging it into the 
machine? Is BIOS and such up to date?

>My USB flash works fine here in 7.1.1, so maybe its something HAL related on
>your particular system? Can you manually mount any flash disks after 
>inserting them?
>
># mount /dev/da0s1 /mnt
>
>(or whatever your device is on this flash disk)
>
>
>--
>Kris Moore
>PC-BSD Software
>
>On Sat, 18 Jul 2009, doverosx at gmail.com wrote:
>
> > ....are not working at all.
> >
> > Here is dmesg output related to USB drives
> >
> > umass0: <Generic Mass Storage, class 0/0, rev 2.00/1.01, addr 2> on uhub1
> > umass0: Get Max Lun not supported (STALLED)
> > (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
> > (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> > (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
> > (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
> > (probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have
> > changed
> > (probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
> > da0 at umass-sim0 bus 0 target 0 lun 0
> > da0: <Generic Flash Disk 8.07> Removable Direct Access SCSI-2 device
> > da0: 40.000MB/s transfers
> > da0: 1986MB (4067328 512 byte sectors: 255H 63S/T 253C)
> > GEOM_LABEL: Label for provider da0 is msdosfs/NEW VOLUME.
> >
> > Thank you,
> > Brodey Dover
> >
> > PS,
> > rebooting solved nothing and other flash drives that also used to work,
> > do not work.
> > _______________________________________________
> > Testing mailing list
> > Testing at lists.pcbsd.org
> > http://lists.pcbsd.org/mailman/listinfo/testing
> >
> > !DSPAM:1,4a624490825698787365721!
> >
> >
> >
>_______________________________________________
>Testing mailing list
>Testing at lists.pcbsd.org
>http://lists.pcbsd.org/mailman/listinfo/testing



More information about the Testing mailing list