[PC-BSD Testing] Great, USB flash drives

Kris Moore kris at pcbsd.org
Mon Jul 20 09:13:29 PDT 2009



My USB flash works fine here in 7.1.1, so maybe its something HAL related on
your particular system? Can you manually mount any flash disks after inserting them?

# mount /dev/da0s1 /mnt

(or whatever your device is on this flash disk)


--
Kris Moore
PC-BSD Software

On Sat, 18 Jul 2009, doverosx at gmail.com wrote:

> ....are not working at all.
>
> Here is dmesg output related to USB drives
>
> umass0: <Generic Mass Storage, class 0/0, rev 2.00/1.01, addr 2> on uhub1
> umass0: Get Max Lun not supported (STALLED)
> (probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0
> (probe0:umass-sim0:0:0:0): CAM Status: SCSI Status Error
> (probe0:umass-sim0:0:0:0): SCSI Status: Check Condition
> (probe0:umass-sim0:0:0:0): UNIT ATTENTION asc:28,0
> (probe0:umass-sim0:0:0:0): Not ready to ready change, medium may have
> changed
> (probe0:umass-sim0:0:0:0): Retrying Command (per Sense Data)
> da0 at umass-sim0 bus 0 target 0 lun 0
> da0: <Generic Flash Disk 8.07> Removable Direct Access SCSI-2 device
> da0: 40.000MB/s transfers
> da0: 1986MB (4067328 512 byte sectors: 255H 63S/T 253C)
> GEOM_LABEL: Label for provider da0 is msdosfs/NEW VOLUME.
>
> Thank you,
> Brodey Dover
>
> PS,
> rebooting solved nothing and other flash drives that also used to work,
> do not work.
> _______________________________________________
> Testing mailing list
> Testing at lists.pcbsd.org
> http://lists.pcbsd.org/mailman/listinfo/testing
>
> !DSPAM:1,4a624490825698787365721!
>
>
>


More information about the Testing mailing list