[PC-BSD Testing] Weird problem

[A.Yerenkow]

On 17.12.2009 13:08, Jeff wrote:
> I had a system crash/power failure and when I rebooted I started 
> seeing an endless chain of:
>
> 12/17/09 06:00:13 pm    pcbsd    kernel    acd0: WARNING - SETFEATURES 
> SET TRANSFER MODE taskqueue timeout - completing request directly
> 12/17/09 06:00:17 pm    pcbsd    kernel    acd0: WARNING - SETFEATURES 
> SET TRANSFER MODE taskqueue timeout - completing request directly
> 12/17/09 06:00:17 pm    pcbsd    kernel    acd0: FAILURE - 
> TEST_UNIT_READY timed out
>
> I thought this was related to my RAID0 array failure so I disabled the 
> crippled drive and rebooted off the single drive.  Seemed all was ok 
> but every 10 seconds or so the system would hand for 10 seconds and 
> the HD light was stuck on.
>

It end with full hangup, or just going continuosly?
>
> Looking at the system log showed the above warnings continually, 
> coinciding with the HD light and system hang.
>
try run dmesg and see what's happening in this time.
Also, try to boot from cd/dvd and run fsck for your drive.
Also, you can run top press "i" to see who's making this things.

Luck!


>
> Any idea why the CD drive is involved?
> Did something get damaged in the crash?
> How do I repair this?
> I'm running PCBSD 7.1.1/64bit
>
> Tnx, Jeff
>
>
>
> _______________________________________________
> Testing mailing list
> Testing at lists.pcbsd.org
> http://lists.pcbsd.org/mailman/listinfo/testing
>    


-- 
Best Regards
Alexander Yerenkow,
????? ?? ?????? ? ????????? ? ???????????

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.pcbsd.org/pipermail/testing/attachments/20091217/3d9f95ba/attachment-0001.html