[PC-BSD Testing] Testing Digest, Vol 31, Issue 26
Fabrizio Parrella
fabrizio at bibivu.com
Mon Aug 31 10:59:24 PDT 2009
I had a similar issue in the past, and it was related that the user did
not have a terminal command associated or it was an invalid one
Fabry
Ian Robinson wrote:
>
>
> On Mon, Aug 31, 2009 at 9:14 AM, <testing-request at lists.pcbsd.org
> <mailto:testing-request at lists.pcbsd.org>> wrote:
>
> Today's Topics:
>
> 1. Re: PCBSD 7.1.1 - Can't use console - additional information
> (Kris Moore)
>
> From: Kris Moore <kris at pcbsd.org <mailto:kris at pcbsd.org>>
> Subject: Re: [PC-BSD Testing] PCBSD 7.1.1 - Can't use console -
>
> Ian,
>
> Just for kicks, can you reboot re-run the display setup wizard?
> Then choose "vesa" as your driver for now, and
> log into the desktop. If you then hit ctrl-alt-f1, does the
> keyboard work?
>
>
> Also, what type of keyboard is this, PS2 / USB? I'm trying to
> understand if this is a video driver issue, or
> a hal/dbus issue.
>
>
> --
> Kris Moore
> PC-BSD Software
>
>
>
> Kris --
>
> I started in the VESA mode as you requested. It makes no difference,
> so I still cannot get to console.
>
> I have a PS/2 style keyboard and mouse.
>
> I suspect that this problem is something unique to this type of
> machine (HP wx8200 workstation) . I have an identical computer which
> exhibits the same I-cannot-get-to-console behavior. However, PCBSD
> 7.1.1 on a "more vanilla" 2.0 GHz HP Vectra VL-420 and other computers
> readily goes into console.
>
> What is "different" about this computer from my others is it has dual
> Xeon processors and a high performance nVidia video adapter. Although
> it has a SCSI controller and a mix of several different kinds of hard
> disks, I have other computers with dual processors (PIII - not Xeon)
> and with SCSI with a mix of several different kinds of hard disks
> (SCSI & IDE) where I have no problem at all going to console. I have
> no other problems than the going to or from console.
>
> I am listing the particulars of this machine in case you seek specifics:
>
> =================
> EQUIPMENT SUMMARY
> =================
>
> HP xw8200
> Dual Xeon 3.4 GHz Processors
> 4 Gb RAM
> nVidia Quadro FX 3400 w/ 256 Mb
> ModusLnk SCSI Controller (LSILogic 1030 Ultra4 SCSU Adapter)
> Dual booting SCSI
> SCSI hard disk #1 73Gb SCSI hard disk (da0S1a - XP)
> SCSI hard disk #2 booting 73Gb SCSI hard disk (da1s1a - PCBSD 7.1.1)
> Intel ICH5 UDMA100 ATA/IDE controller
> Intel ICH5 SATA150 controller
> EIDE Hard Disk #1 Western Dig. 300 Gb. (ad0s1d - ufs - mounted @ /home2)
> EIDE Hard Disk #2 Western Dig. 320 Gb. (ad1s1d - ufs - mounted @ /home3)
> USB External Hard Disk Western Dig. 120 Gb. (da2 - fat32)
> IDE DVD Drive #1 GCC-H20N (HL-DT-ST) (acd0)
> IDE DVD Drive #2 Sony DRU-830A (DVD-RW) (acd1)
> Intel 82801EB (ICH5) USB controller (USB 2.0)
> PS/2 Keyboard & Mouse
>
> =====================================================
> EXCERPTS FROM DMESG
> =====================================================
>
> FreeBSD 7.2-STABLE #11: Wed Jun 24 18:36:21 EDT 2009
> root at build7x32.pcbsd.org:/usr/obj/pcbsd-build72/cvs/7.2-src/sys/PCBSD
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Xeon(TM) CPU 3.40GHz (3400.14-MHz 686-class CPU)
> Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
>
> Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>
>
> Features2=0x649d<SSE3,DTES64,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR>
>
> AMD
> Features=0x20000000<LM>
>
> real memory = 3489615872 (3327
> MB)
> avail memory = 3397611520 (3240
> MB)
> ACPI APIC Table: <COMPAQ
> TUMWATER>
> FreeBSD/SMP: Multiprocessor System Detected: 2
> CPUs
> cpu0 (BSP): APIC ID:
> 0
>
> cpu1 (AP): APIC ID: 6
>
> * * *
>
> acd0: CDRW <HL-DT-ST RW/DVD GCC-H20N/1.04> at ata1-master
> UDMA33
> acd1: DVDR <SONY DVD RW DRU-830A/SS25> at ata1-slave
> UDMA66
> GEOM_LABEL: Label for provider ad1s1 is
> ufsid/4935b85fbf547af8.
> acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24
> ascq=0x00
> acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24
> ascq=0x00
> (probe12:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0
> 0
> (probe12:ata1:0:0:0): CAM Status: SCSI Status
> Error
> (probe12:ata1:0:0:0): SCSI Status: Check
> Condition
> (probe12:ata1:0:0:0): NOT READY
> asc:3a,0
> (probe12:ata1:0:0:0): Medium not
> present
> (probe12:ata1:0:0:0): Unretryable
> error
> (probe13:ata1:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0
> 0
> (probe13:ata1:0:1:0): CAM Status: SCSI Status
> Error
> (probe13:ata1:0:1:0): SCSI Status: Check
> Condition
> (probe13:ata1:0:1:0): NOT READY
> asc:3a,1
> (probe13:ata1:0:1:0): Medium not present - tray
> closed
> (probe13:ata1:0:1:0): Unretryable
> error
> da2 at umass-sim0 bus 0 target 0 lun
> 0
> da2: <WD 1200BB External 0412> Fixed Direct Access SCSI-0
> device
> da2: 40.000MB/s
> transfers
>
> da2: 114473MB (234441648 512 byte sectors: 255H 63S/T
> 14593C)
> da0 at mpt0 bus 0 target 0 lun
> 0
> da0: <ModusLnk MXJ3073SC680600T M108> Fixed Direct Access SCSI-3
> device
> da0: 320.000MB/s transfers (160.000MHz, offset 127,
> 16bit)
> da0: Command Queueing
> Enabled
>
> da0: 70136MB (143638992 512 byte sectors: 255H 63S/T
> 8941C)
> da1 at mpt0 bus 0 target 4 lun
> 0
> da1: <ModusLnk MXJ3073SC680600T M108> Fixed Direct Access SCSI-3
> device
> da1: 320.000MB/s transfers (160.000MHz, offset 127,
> 16bit)
> da1: Command Queueing
> Enabled
>
> da1: 70136MB (143638992 512 byte sectors: 255H 63S/T
> 8941C)
> cd0 at ata1 bus 0 target 0 lun
> 0
> cd0: <HL-DT-ST RW/DVD GCC-H20N 1.04> Removable CD-ROM SCSI-0
> device
> cd0: 33.000MB/s
> transfers
>
> cd0: Attempt to query device size failed: NOT READY, Medium not
> present
> SMP: AP CPU #1
> Launched!
>
> cd1 at ata1 bus 0 target 1 lun
> 0
> cd1: <SONY DVD RW DRU-830A SS25> Removable CD-ROM SCSI-0
> device
> cd1: 66.000MB/s
> transfers
>
> cd1: Attempt to query device size failed: NOT READY, Medium not
> present - tray closed
> GEOM_LABEL: Label for provider da0s1 is
> ntfs/Windows.
> GEOM_LABEL: Label for provider da2s1 is msdosfs/WD USB
> 2.
> GEOM_LABEL: Label for provider da1s1a is
> ufsid/4920992dc5ed3bd8.
> Trying to mount root from
> ufs:/dev/da1s1a
>
> * * *
> vgapci0: child nvidia0 requested pci_enable_busmaster
> vgapci0: child nvidia0 requested pci_enable_io
> vgapci0: failed to enable memory mapping!
>
> * * *
>
> =====================================================
> PCI DEVICES
> =====================================================
> [IR at rtbank]/home/IR(107)% pciconf
> -lv
> hostb0 at pci0:0:0:0: class=0x060000 card=0x12f1103c chip=0x359e8086
> rev=0x0c hdr=0x00
> vendor = 'Intel
> Corporation'
> device = 'E7525 Workstation Memory Controller
> Hub'
> class =
> bridge
>
> subclass =
> HOST-PCI
>
> pcib1 at pci0:0:2:0: class=0x060400 card=0x00000000 chip=0x35958086
> rev=0x0c hdr=0x01
> vendor = 'Intel
> Corporation'
> device = 'E752x Memory Controller Hub PCIe Port
> A0'
> class =
> bridge
>
> subclass =
> PCI-PCI
>
> pcib2 at pci0:0:3:0: class=0x060400 card=0x00000000 chip=0x35968086
> rev=0x0c hdr=0x01
> vendor = 'Intel
> Corporation'
> device = 'E752x Memory Controller Hub PCIe Port
> A1'
> class =
> bridge
>
> subclass =
> PCI-PCI
>
> pcib5 at pci0:0:4:0: class=0x060400 card=0x00000000 chip=0x35978086
> rev=0x0c hdr=0x01
> vendor = 'Intel
> Corporation'
> device = 'E752x Memory Controller Hub PCIe Port
> B0'
> class =
> bridge
>
> subclass =
> PCI-PCI
>
> uhci0 at pci0:0:29:0: class=0x0c0300 card=0x12f1103c chip=0x24d28086
> rev=0x02 hdr=0x00
> vendor = 'Intel
> Corporation'
> device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller
> *1'
> class = serial
> bus
> subclass =
> USB
>
> uhci1 at pci0:0:29:1: class=0x0c0300 card=0x12f1103c chip=0x24d48086
> rev=0x02 hdr=0x00
> vendor = 'Intel
> Corporation'
> device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller
> *2'
> class = serial
> bus
> subclass =
> USB
>
> uhci2 at pci0:0:29:2: class=0x0c0300 card=0x12f1103c chip=0x24d78086
> rev=0x02 hdr=0x00
> vendor = 'Intel
> Corporation'
> device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller
> *3'
> class = serial
> bus
> subclass =
> USB
>
> uhci3 at pci0:0:29:3: class=0x0c0300 card=0x12f1103c chip=0x24de8086
> rev=0x02 hdr=0x00
> vendor = 'Intel
> Corporation'
> device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller
> *4'
> class = serial
> bus
> subclass =
> USB
>
> ehci0 at pci0:0:29:7: class=0x0c0320 card=0x12f1103c chip=0x24dd8086
> rev=0x02 hdr=0x00
> vendor = 'Intel
> Corporation'
> device = '82801EB/ER (ICH5/ICH5R) USB 2.0 EHCI
> Controller'
> class = serial
> bus
> subclass =
> USB
>
> pcib6 at pci0:0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086
> rev=0xc2 hdr=0x01
> vendor = 'Intel
> Corporation'
> device = '82801 Family (ICH2/3/4/5/6/7/8/9,63xxESB) Hub
> Interface to PCI Bridge'
> class =
> bridge
>
> subclass =
> PCI-PCI
>
> isab0 at pci0:0:31:0: class=0x060100 card=0x00000000 chip=0x24d08086
> rev=0x02 hdr=0x00
> vendor = 'Intel
> Corporation'
> device = '82801EB/ER (ICH5/ICH5R) LPC Interface
> Bridge'
> class =
> bridge
>
> subclass =
> PCI-ISA
>
> atapci0 at pci0:0:31:1: class=0x01018a card=0x12f1103c chip=0x24db8086
> rev=0x02 hdr=0x00
> vendor = 'Intel
> Corporation'
> device = '82801EB/ER (ICH5/ICH5R) EIDE
> Controller'
> class = mass
> storage
>
> subclass =
> ATA
>
> atapci1 at pci0:0:31:2: class=0x01018f card=0x12f1103c chip=0x24d18086
> rev=0x02 hdr=0x00
> vendor = 'Intel
> Corporation'
> device = '82801EB (ICH5) SATA
> Controller'
> class = mass
> storage
>
> subclass =
> ATA
>
> pcm0 at pci0:0:31:5: class=0x040100 card=0x12f1103c chip=0x24d58086
> rev=0x02 hdr=0x00
> vendor = 'Intel
> Corporation'
> device = 'multimedia audio device (codec AC97) SoundMAX or VIA
> (8086)'
> class =
> multimedia
>
> subclass =
> audio
>
> pcib3 at pci0:1:0:0: class=0x060400 card=0x00000000 chip=0x03298086
> rev=0x09 hdr=0x01
> vendor = 'Intel
> Corporation'
> device = 'PCI Express-to-PCI Express Bridge A (6700PXH)'
> class = bridge
> subclass = PCI-PCI
> ioapic0 at pci0:1:0:1: class=0x080020 card=0x12f1103c chip=0x03268086
> rev=0x09 hdr=0x00
> vendor = 'Intel Corporation'
> device = '6700/6702PXH I/OxAPIC Interrupt Controller A'
> class = base peripheral
> subclass = interrupt controller
> pcib4 at pci0:1:0:2: class=0x060400 card=0x00000000 chip=0x032a8086
> rev=0x09 hdr=0x01
> vendor = 'Intel Corporation'
> device = 'PCI Express-to-PCI Express Bridge B (6700PXH)'
> class = bridge
> subclass = PCI-PCI
> ioapic1 at pci0:1:0:3: class=0x080020 card=0x12f1103c chip=0x03278086
> rev=0x09 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'I/OxAPIC Interrupt Controller B (6700PXH)'
> class = base peripheral
> subclass = interrupt controller
> mpt0 at pci0:2:5:0: class=0x010000 card=0x12f1103c chip=0x00301000
> rev=0x07 hdr=0x00
> vendor = 'LSI Logic (Was: Symbios Logic, NCR)'
> device = 'PCI-X to Ultra320 SCSI Controller (LSI53C1020/1030)'
> class = mass storage
> subclass = SCSI
> mpt1 at pci0:2:5:1: class=0x010000 card=0x12f1103c chip=0x00301000
> rev=0x07 hdr=0x00
> vendor = 'LSI Logic (Was: Symbios Logic, NCR)'
> device = 'PCI-X to Ultra320 SCSI Controller (LSI53C1020/1030)'
> class = mass storage
> subclass = SCSI
> vgapci0 at pci0:64:0:0: class=0x030000 card=0x029b10de chip=0x00f810de
> rev=0xa2 hdr=0x00
> vendor = 'Nvidia Corp'
> device = 'NVIDIA Quadro FX 3400/4400 (NVBR02)'
> class = display
> subclass = VGA
> fwohci0 at pci0:16:2:0: class=0x0c0010 card=0x12f1103c chip=0x8023104c
> rev=0x00 hdr=0x00
> vendor = 'Texas Instruments (TI)'
> device = 'IEEE1394a-2000 OHCI PHY/Link-Layer Ctrlr (TSB43AB21/A)'
> class = serial bus
> subclass = FireWire
> em0 at pci0:16:3:0: class=0x020000 card=0x12f1103c chip=0x10768086
> rev=0x05 hdr=0x00
> vendor = 'Intel Corporation'
> device = 'Gigabit Ethernet Controller (82541EI)'
> class = network
> subclass = ethernet
> [IR at rtbank]/home/IR(108)%
>
>
> =====================================================
> DISK MOUNTS
> =====================================================
> [IR at rtbank]/home/IR(101)% df
> Filesystem 1K-blocks Used Avail Capacity Mounted on
>
> /dev/da1s1a 69050488 15108568 48417882 24% /
>
> devfs 1 1 0 100% /dev
>
> /dev/ad0s1d 302729494 61908276 216602860 22% /home2
>
> /dev/ad1s1d 283810134 55506502 205598822 21% /home3
>
> linprocfs 4 4 0 100% /compat/linux/proc
>
> procfs 4 4 0 100% /proc
>
> /dev/md0 789518 22 726336 0% /tmp
>
>
> Thank you for the interest and all your fabulous development on our
> behalf.
>
> Ian Robinson
> Salem, Ohio
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> Testing mailing list
> Testing at lists.pcbsd.org
> http://lists.pcbsd.org/mailman/listinfo/testing
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.pcbsd.org/pipermail/testing/attachments/20090831/2765f6d9/attachment-0001.html
More information about the Testing
mailing list