[PC-BSD Testing] Testing Digest, Vol 31, Issue 26
Ian Robinson
fitchkendall at gmail.com
Mon Aug 31 10:41:48 PDT 2009
On Mon, Aug 31, 2009 at 9:14 AM, <testing-request at lists.pcbsd.org> wrote:
> Today's Topics:
>
> 1. Re: PCBSD 7.1.1 - Can't use console - additional information
> (Kris Moore)
>
> From: Kris Moore <kris at pcbsd.org>
> Subject: Re: [PC-BSD Testing] PCBSD 7.1.1 - Can't use console -
>
> Ian,
>
> Just for kicks, can you reboot re-run the display setup wizard? Then choose
> "vesa" as your driver for now, and
> log into the desktop. If you then hit ctrl-alt-f1, does the keyboard work?
>
> Also, what type of keyboard is this, PS2 / USB? I'm trying to understand if
> this is a video driver issue, or
> a hal/dbus issue.
>
>
> --
> Kris Moore
> PC-BSD Software
>
Kris --
I started in the VESA mode as you requested. It makes no difference, so I
still cannot get to console.
I have a PS/2 style keyboard and mouse.
I suspect that this problem is something unique to this type of machine (HP
wx8200 workstation) . I have an identical computer which exhibits the same
I-cannot-get-to-console behavior. However, PCBSD 7.1.1 on a "more vanilla"
2.0 GHz HP Vectra VL-420 and other computers readily goes into console.
What is "different" about this computer from my others is it has dual Xeon
processors and a high performance nVidia video adapter. Although it has a
SCSI controller and a mix of several different kinds of hard disks, I have
other computers with dual processors (PIII - not Xeon) and with SCSI with a
mix of several different kinds of hard disks (SCSI & IDE) where I have no
problem at all going to console. I have no other problems than the going to
or from console.
I am listing the particulars of this machine in case you seek specifics:
=================
EQUIPMENT SUMMARY
=================
HP xw8200
Dual Xeon 3.4 GHz Processors
4 Gb RAM
nVidia Quadro FX 3400 w/ 256 Mb
ModusLnk SCSI Controller (LSILogic 1030 Ultra4 SCSU Adapter)
Dual booting SCSI
SCSI hard disk #1 73Gb SCSI hard disk (da0S1a - XP)
SCSI hard disk #2 booting 73Gb SCSI hard disk (da1s1a - PCBSD 7.1.1)
Intel ICH5 UDMA100 ATA/IDE controller
Intel ICH5 SATA150 controller
EIDE Hard Disk #1 Western Dig. 300 Gb. (ad0s1d - ufs - mounted @ /home2)
EIDE Hard Disk #2 Western Dig. 320 Gb. (ad1s1d - ufs - mounted @ /home3)
USB External Hard Disk Western Dig. 120 Gb. (da2 - fat32)
IDE DVD Drive #1 GCC-H20N (HL-DT-ST) (acd0)
IDE DVD Drive #2 Sony DRU-830A (DVD-RW) (acd1)
Intel 82801EB (ICH5) USB controller (USB 2.0)
PS/2 Keyboard & Mouse
=====================================================
EXCERPTS FROM DMESG
=====================================================
FreeBSD 7.2-STABLE #11: Wed Jun 24 18:36:21 EDT 2009
root at build7x32.pcbsd.org:/usr/obj/pcbsd-build72/cvs/7.2-src/sys/PCBSD
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Xeon(TM) CPU 3.40GHz (3400.14-MHz 686-class CPU)
Origin = "GenuineIntel" Id = 0xf41 Stepping = 1
Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
Features2=0x649d<SSE3,DTES64,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR>
AMD
Features=0x20000000<LM>
real memory = 3489615872 (3327
MB)
avail memory = 3397611520 (3240
MB)
ACPI APIC Table: <COMPAQ
TUMWATER>
FreeBSD/SMP: Multiprocessor System Detected: 2
CPUs
cpu0 (BSP): APIC ID:
0
cpu1 (AP): APIC ID: 6
* * *
acd0: CDRW <HL-DT-ST RW/DVD GCC-H20N/1.04> at ata1-master
UDMA33
acd1: DVDR <SONY DVD RW DRU-830A/SS25> at ata1-slave
UDMA66
GEOM_LABEL: Label for provider ad1s1 is
ufsid/4935b85fbf547af8.
acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24
ascq=0x00
acd1: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24
ascq=0x00
(probe12:ata1:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0
0
(probe12:ata1:0:0:0): CAM Status: SCSI Status
Error
(probe12:ata1:0:0:0): SCSI Status: Check
Condition
(probe12:ata1:0:0:0): NOT READY
asc:3a,0
(probe12:ata1:0:0:0): Medium not
present
(probe12:ata1:0:0:0): Unretryable
error
(probe13:ata1:0:1:0): TEST UNIT READY. CDB: 0 0 0 0 0
0
(probe13:ata1:0:1:0): CAM Status: SCSI Status
Error
(probe13:ata1:0:1:0): SCSI Status: Check
Condition
(probe13:ata1:0:1:0): NOT READY
asc:3a,1
(probe13:ata1:0:1:0): Medium not present - tray
closed
(probe13:ata1:0:1:0): Unretryable
error
da2 at umass-sim0 bus 0 target 0 lun
0
da2: <WD 1200BB External 0412> Fixed Direct Access SCSI-0
device
da2: 40.000MB/s
transfers
da2: 114473MB (234441648 512 byte sectors: 255H 63S/T
14593C)
da0 at mpt0 bus 0 target 0 lun
0
da0: <ModusLnk MXJ3073SC680600T M108> Fixed Direct Access SCSI-3
device
da0: 320.000MB/s transfers (160.000MHz, offset 127,
16bit)
da0: Command Queueing
Enabled
da0: 70136MB (143638992 512 byte sectors: 255H 63S/T
8941C)
da1 at mpt0 bus 0 target 4 lun
0
da1: <ModusLnk MXJ3073SC680600T M108> Fixed Direct Access SCSI-3
device
da1: 320.000MB/s transfers (160.000MHz, offset 127,
16bit)
da1: Command Queueing
Enabled
da1: 70136MB (143638992 512 byte sectors: 255H 63S/T
8941C)
cd0 at ata1 bus 0 target 0 lun
0
cd0: <HL-DT-ST RW/DVD GCC-H20N 1.04> Removable CD-ROM SCSI-0
device
cd0: 33.000MB/s
transfers
cd0: Attempt to query device size failed: NOT READY, Medium not
present
SMP: AP CPU #1
Launched!
cd1 at ata1 bus 0 target 1 lun
0
cd1: <SONY DVD RW DRU-830A SS25> Removable CD-ROM SCSI-0
device
cd1: 66.000MB/s
transfers
cd1: Attempt to query device size failed: NOT READY, Medium not present -
tray closed
GEOM_LABEL: Label for provider da0s1 is
ntfs/Windows.
GEOM_LABEL: Label for provider da2s1 is msdosfs/WD USB
2.
GEOM_LABEL: Label for provider da1s1a is
ufsid/4920992dc5ed3bd8.
Trying to mount root from
ufs:/dev/da1s1a
* * *
vgapci0: child nvidia0 requested pci_enable_busmaster
vgapci0: child nvidia0 requested pci_enable_io
vgapci0: failed to enable memory mapping!
* * *
=====================================================
PCI DEVICES
=====================================================
[IR at rtbank]/home/IR(107)% pciconf
-lv
hostb0 at pci0:0:0:0: class=0x060000 card=0x12f1103c chip=0x359e8086
rev=0x0c hdr=0x00
vendor = 'Intel
Corporation'
device = 'E7525 Workstation Memory Controller
Hub'
class =
bridge
subclass =
HOST-PCI
pcib1 at pci0:0:2:0: class=0x060400 card=0x00000000 chip=0x35958086
rev=0x0c hdr=0x01
vendor = 'Intel
Corporation'
device = 'E752x Memory Controller Hub PCIe Port
A0'
class =
bridge
subclass =
PCI-PCI
pcib2 at pci0:0:3:0: class=0x060400 card=0x00000000 chip=0x35968086
rev=0x0c hdr=0x01
vendor = 'Intel
Corporation'
device = 'E752x Memory Controller Hub PCIe Port
A1'
class =
bridge
subclass =
PCI-PCI
pcib5 at pci0:0:4:0: class=0x060400 card=0x00000000 chip=0x35978086
rev=0x0c hdr=0x01
vendor = 'Intel
Corporation'
device = 'E752x Memory Controller Hub PCIe Port
B0'
class =
bridge
subclass =
PCI-PCI
uhci0 at pci0:0:29:0: class=0x0c0300 card=0x12f1103c chip=0x24d28086
rev=0x02 hdr=0x00
vendor = 'Intel
Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller
*1'
class = serial
bus
subclass =
USB
uhci1 at pci0:0:29:1: class=0x0c0300 card=0x12f1103c chip=0x24d48086
rev=0x02 hdr=0x00
vendor = 'Intel
Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller
*2'
class = serial
bus
subclass =
USB
uhci2 at pci0:0:29:2: class=0x0c0300 card=0x12f1103c chip=0x24d78086
rev=0x02 hdr=0x00
vendor = 'Intel
Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller
*3'
class = serial
bus
subclass =
USB
uhci3 at pci0:0:29:3: class=0x0c0300 card=0x12f1103c chip=0x24de8086
rev=0x02 hdr=0x00
vendor = 'Intel
Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB UHCI Controller
*4'
class = serial
bus
subclass =
USB
ehci0 at pci0:0:29:7: class=0x0c0320 card=0x12f1103c chip=0x24dd8086
rev=0x02 hdr=0x00
vendor = 'Intel
Corporation'
device = '82801EB/ER (ICH5/ICH5R) USB 2.0 EHCI
Controller'
class = serial
bus
subclass =
USB
pcib6 at pci0:0:30:0: class=0x060400 card=0x00000000 chip=0x244e8086
rev=0xc2 hdr=0x01
vendor = 'Intel
Corporation'
device = '82801 Family (ICH2/3/4/5/6/7/8/9,63xxESB) Hub Interface to
PCI Bridge'
class =
bridge
subclass =
PCI-PCI
isab0 at pci0:0:31:0: class=0x060100 card=0x00000000 chip=0x24d08086
rev=0x02 hdr=0x00
vendor = 'Intel
Corporation'
device = '82801EB/ER (ICH5/ICH5R) LPC Interface
Bridge'
class =
bridge
subclass =
PCI-ISA
atapci0 at pci0:0:31:1: class=0x01018a card=0x12f1103c chip=0x24db8086
rev=0x02 hdr=0x00
vendor = 'Intel
Corporation'
device = '82801EB/ER (ICH5/ICH5R) EIDE
Controller'
class = mass
storage
subclass =
ATA
atapci1 at pci0:0:31:2: class=0x01018f card=0x12f1103c chip=0x24d18086
rev=0x02 hdr=0x00
vendor = 'Intel
Corporation'
device = '82801EB (ICH5) SATA
Controller'
class = mass
storage
subclass =
ATA
pcm0 at pci0:0:31:5: class=0x040100 card=0x12f1103c chip=0x24d58086
rev=0x02 hdr=0x00
vendor = 'Intel
Corporation'
device = 'multimedia audio device (codec AC97) SoundMAX or VIA
(8086)'
class =
multimedia
subclass =
audio
pcib3 at pci0:1:0:0: class=0x060400 card=0x00000000 chip=0x03298086
rev=0x09 hdr=0x01
vendor = 'Intel
Corporation'
device = 'PCI Express-to-PCI Express Bridge A (6700PXH)'
class = bridge
subclass = PCI-PCI
ioapic0 at pci0:1:0:1: class=0x080020 card=0x12f1103c chip=0x03268086
rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = '6700/6702PXH I/OxAPIC Interrupt Controller A'
class = base peripheral
subclass = interrupt controller
pcib4 at pci0:1:0:2: class=0x060400 card=0x00000000 chip=0x032a8086
rev=0x09 hdr=0x01
vendor = 'Intel Corporation'
device = 'PCI Express-to-PCI Express Bridge B (6700PXH)'
class = bridge
subclass = PCI-PCI
ioapic1 at pci0:1:0:3: class=0x080020 card=0x12f1103c chip=0x03278086
rev=0x09 hdr=0x00
vendor = 'Intel Corporation'
device = 'I/OxAPIC Interrupt Controller B (6700PXH)'
class = base peripheral
subclass = interrupt controller
mpt0 at pci0:2:5:0: class=0x010000 card=0x12f1103c chip=0x00301000
rev=0x07 hdr=0x00
vendor = 'LSI Logic (Was: Symbios Logic, NCR)'
device = 'PCI-X to Ultra320 SCSI Controller (LSI53C1020/1030)'
class = mass storage
subclass = SCSI
mpt1 at pci0:2:5:1: class=0x010000 card=0x12f1103c chip=0x00301000
rev=0x07 hdr=0x00
vendor = 'LSI Logic (Was: Symbios Logic, NCR)'
device = 'PCI-X to Ultra320 SCSI Controller (LSI53C1020/1030)'
class = mass storage
subclass = SCSI
vgapci0 at pci0:64:0:0: class=0x030000 card=0x029b10de chip=0x00f810de
rev=0xa2 hdr=0x00
vendor = 'Nvidia Corp'
device = 'NVIDIA Quadro FX 3400/4400 (NVBR02)'
class = display
subclass = VGA
fwohci0 at pci0:16:2:0: class=0x0c0010 card=0x12f1103c chip=0x8023104c
rev=0x00 hdr=0x00
vendor = 'Texas Instruments (TI)'
device = 'IEEE1394a-2000 OHCI PHY/Link-Layer Ctrlr (TSB43AB21/A)'
class = serial bus
subclass = FireWire
em0 at pci0:16:3:0: class=0x020000 card=0x12f1103c chip=0x10768086
rev=0x05 hdr=0x00
vendor = 'Intel Corporation'
device = 'Gigabit Ethernet Controller (82541EI)'
class = network
subclass = ethernet
[IR at rtbank]/home/IR(108)%
=====================================================
DISK MOUNTS
=====================================================
[IR at rtbank]/home/IR(101)% df
Filesystem 1K-blocks Used Avail Capacity Mounted on
/dev/da1s1a 69050488 15108568 48417882 24% /
devfs 1 1 0 100% /dev
/dev/ad0s1d 302729494 61908276 216602860 22% /home2
/dev/ad1s1d 283810134 55506502 205598822 21% /home3
linprocfs 4 4 0 100% /compat/linux/proc
procfs 4 4 0 100% /proc
/dev/md0 789518 22 726336 0% /tmp
Thank you for the interest and all your fabulous development on our behalf.
Ian Robinson
Salem, Ohio
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.pcbsd.org/pipermail/testing/attachments/20090831/bf47d3da/attachment-0001.html
More information about the Testing
mailing list