[PC-BSD Testing] Problem installing 7.01 to HP xw8200 workstation

Brodey Dover pcfxer at rogers.com
Wed Nov 12 13:59:25 PST 2008


Ian Robinson wrote:
> Hello all --
>
> I am having trouble installing PCBSD 7.01 on an HP xw8200 with dual
> Xeon 3.4GHz, 4GB ECC Memory, 146 Gb SCSI U320 HDD, nVidia Quadro
> FX3400 256MB Dual DVI Head Graphics card.  I am running only a single
> monitor.  BIOS is updated to most current version.   My problem is the
> installation hangs indefinitely after the PCBSD Welcome page. However,
> I do have PCBSD 7.01 running on an identical xw8200.  I also have
> PCBSD 7.0.1 running on an HP ML-370 dual Intel P-III with a 6-disk
> SCSI RAID Array and several other HP P-4's without any problem, but
> none of them (except the twin xw8200) have the high performance
> graphics card.
>
>  I am wondering:
>
> (a) do I have a hardware recognition problem because of the dual
> processors, the nVidia card or the SCSI devices;
> (b) do I have a PCBSD/FreeBSD driver problem;
> (c) if I do, why does an identical computer run PCBSD 7.01 while this
> one does not; and
> (d) why does this computer run under NetBSD and XP but not PCBSD 7.01.
> (e) would I need some special "setup" disk the same way that an HP
> ML-type servers require configuration with SmartStart to run either XP
> or Linux/Unix before installing the operating system.  (Note:  HP does
> require an installation disk if one is installing RedHat Linux).
>
>
> Here are some of the sordid details (and I apologize in advance for
> the long post):
>
> After booting from a known good cd, the boot loader starts and brings
> me to the PCBSD Welcome screen.  The countdown clock does not count
> down but hangs at "10".  It does not progress to the default install,
> but I can select an installation option manually.  I have tried the
> install options for (1) default, (2) no ACPI, (3) Safe, (4) Single,
> (6) Emergency and (7) VESA, all of which start the install but hang
> almost immediately.  The only messages to appear are the copyright
> notice and the name and date of the release:
>
> Copyright (c) 1992-2008 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 7.1-PRERELEASE #1: Tue Oct  7 09:17:14 EDT 2008
>     root at pcbsdx32-7:/usr/obj/pcbsd-build/cvs/7.0.1-src/sys/PCBSD
>  <-------- [computer hangs here displaying a white rectangle]
>
> Ordinarily, the next hardware probe would be for the Timecounter and
> CPU detection.
>
> If you wait about twenty-four to thirty-six hours, it will make a
> little progress through the stages but never reaches the GUI
> installer.  After two days it reached the part of the dmesg where it
> started to recognize the SCSI disks.
>
> I have searched the HP web site and Googled the internet for any
> information about the FreeBSD/xw8200 combination.  There is nothing.
>
>
> ===================================
> PCBSD 7.01 dmesg from working twin computer:
> ===================================
> I am fortunate to have an identical twin of the xw8200 on which I am
> running PCBSD 7.01.  (For it, I simply removed a hard disk from an
> existing PCBSD 7.01 system and placed it in the xw8200 and booted.
> Works great.).  Here is the first part of the dmesg from the working
> xw8200:
>
>
> Copyright (c) 1992-2008 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
> 	The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 7.1-PRERELEASE #1: Tue Oct  7 09:17:14 EDT 2008
>     root at pcbsdx32-7:/usr/obj/pcbsd-build/cvs/7.0.1-src/sys/PCBSD
> <-------- [Note:  other computer hangs after this]
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: Intel(R) Xeon(TM) CPU 3.40GHz (3400.13-MHz 686-class CPU)
>   Origin = "GenuineIntel"  Id = 0xf41  Stepping = 1
>   Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
>   Features2=0x649d<SSE3,RSVD2,MON,DS_CPL,EST,CNXT-ID,CX16,xTPR>
>   AMD Features=0x20000000<LM>
> real memory  = 3489615872 (3327 MB)
> avail memory = 3410280448 (3252 MB)
> ACPI APIC Table: <COMPAQ TUMWATER>
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  6
> ACPI Warning (tbfadt-0324): FADT (revision 3) is longer than ACPI 2.0
> version, truncating length 0x10C to 0xF4 [20070320]
> ACPI Error (tbfadt-0516): 32/64X address mismatch in "Gpe0Block": [
> F828] [       0   1F030], using 64X [20070320]
> ioapic0 <Version 2.0> irqs 0-23 on motherboard
> ioapic1 <Version 2.0> irqs 24-47 on motherboard
> ioapic2 <Version 2.0> irqs 48-71 on motherboard
> kbd1 at kbdmux0
> ath_hal: 0.10.5.6 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112,
> RF2413, RF5413, RF2133, RF2425, RF2417)
> acpi0: <COMPAQ CPQ0063> on motherboard
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> acpi0: reservation of 0, a0000 (3) failed
> acpi0: reservation of 100000, cff00000 (3) failed
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <24-bit timer at 3.579545MHz> port 0xf808-0xf80b on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 2.0 on pci0
> pci32: <ACPI PCI bus> on pcib1
> pcib2: <ACPI PCI-PCI bridge> at device 3.0 on pci0
> pci1: <ACPI PCI bus> on pcib2
> pcib3: <ACPI PCI-PCI bridge> at device 0.0 on pci1
> pci2: <ACPI PCI bus> on pcib3
> mpt0: <LSILogic 1030 Ultra4 Adapter> port 0x4000-0x40ff mem
> 0xf2000000-0xf20fffff,0xf2100000-0xf21fffff irq 30 at device 5.0 on
> pci2
> mpt0: [ITHREAD]
> mpt0: MPI Version=1.2.9.0
> mpt0: Capabilities: ( RAID-1E RAID-1 SAFTE )
> mpt0: 0 Active Volumes (1 Max)
> mpt0: 0 Hidden Drive Members (6 Max)
> mpt1: <LSILogic 1030 Ultra4 Adapter> port 0x4400-0x44ff mem
> 0xf2200000-0xf22fffff,0xf2300000-0xf23fffff irq 31 at device 5.1 on
> pci2
> mpt1: [ITHREAD]
> mpt1: MPI Version=1.2.9.0
> mpt1: Capabilities: ( RAID-1E RAID-1 SAFTE )
> mpt1: 0 Active Volumes (1 Max)
> mpt1: 0 Hidden Drive Members (6 Max)
> pcib4: <ACPI PCI-PCI bridge> at device 0.2 on pci1
> pci11: <ACPI PCI bus> on pcib4
> pcib5: <ACPI PCI-PCI bridge> at device 4.0 on pci0
> pci64: <ACPI PCI bus> on pcib5
> vgapci0: <VGA-compatible display> mem
> 0xf0000000-0xf0ffffff,0xd0000000-0xdfffffff,0xf1000000-0xf1ffffff irq
> 16 at device 0.0 on pci64
> uhci0: <Intel 82801EB (ICH5) USB controller USB-A> port 0x5440-0x545f
> irq 16 at device 29.0 on pci0
> uhci0: [GIANT-LOCKED]
> uhci0: [ITHREAD]
> usb0: <Intel 82801EB (ICH5) USB controller USB-A> on uhci0
> usb0: USB revision 1.0
> uhub0: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
> uhub0: 2 ports with 2 removable, self powered
> uhci1: <Intel 82801EB (ICH5) USB controller USB-B> port 0x5460-0x547f
> irq 19 at device 29.1 on pci0
> uhci1: [GIANT-LOCKED]
> uhci1: [ITHREAD]
> usb1: <Intel 82801EB (ICH5) USB controller USB-B> on uhci1
> usb1: USB revision 1.0
> uhub1: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
> uhub1: 2 ports with 2 removable, self powered
> uhci2: <Intel 82801EB (ICH5) USB controller USB-C> port 0x5480-0x549f
> irq 18 at device 29.2 on pci0
> uhci2: [GIANT-LOCKED]
> uhci2: [ITHREAD]
> usb2: <Intel 82801EB (ICH5) USB controller USB-C> on uhci2
> usb2: USB revision 1.0
> uhub2: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
> uhub2: 2 ports with 2 removable, self powered
> uhci3: <Intel 82801EB (ICH5) USB controller USB-D> port 0x54a0-0x54bf
> irq 16 at device 29.3 on pci0
> uhci3: [GIANT-LOCKED]
> uhci3: [ITHREAD]
> usb3: <Intel 82801EB (ICH5) USB controller USB-D> on uhci3
> usb3: USB revision 1.0
> uhub3: <Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
> uhub3: 2 ports with 2 removable, self powered
> ehci0: <Intel 82801EB/R (ICH5) USB 2.0 controller> mem
> 0xf2600000-0xf26003ff irq 23 at device 29.7 on pci0
> ehci0: [GIANT-LOCKED]
> ehci0: [ITHREAD]
> usb4: EHCI version 1.0
> usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3
> usb4: <Intel 82801EB/R (ICH5) USB 2.0 controller> on ehci0
> usb4: USB revision 2.0
> uhub4: <Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb4
> uhub4: 8 ports with 8 removable, self powered
> pcib6: <ACPI PCI-PCI bridge> at device 30.0 on pci0
> pci16: <ACPI PCI bus> on pcib6
> fwohci0: <Texas Instruments TSB43AB22/A> mem
> 0xf2544000-0xf25447ff,0xf2540000-0xf2543fff irq 16 at device 2.0 on
> pci16
> fwohci0: [FILTER]
> fwohci0: OHCI version 1.10 (ROM=1)
> fwohci0: No. of Isochronous channels is 4.
> fwohci0: EUI64 10:cf:fd:00:00:13:7c:04
> fwohci0: Phy 1394a available S400, 2 ports.
> fwohci0: Link S400, max_rec 2048 bytes.
> firewire0: <IEEE1394(FireWire) bus> on fwohci0
> fwe0: <Ethernet over FireWire> on firewire0
> if_fwe0: Fake Ethernet address: 12:cf:fd:13:7c:04
> fwe0: Ethernet address: 12:cf:fd:13:7c:04
> fwip0: <IP over FireWire> on firewire0
> fwip0: Firewire address: 10:cf:fd:00:00:13:7c:04 @ 0xfffe00000000,
> S400, maxrec 2048
> sbp0: <SBP-2/SCSI over FireWire> on firewire0
> dcons_crom0: <dcons configuration ROM> on firewire0
> dcons_crom0: bus_addr 0x1478000
> fwohci0: Initiate bus reset
> fwohci0: BUS reset
> fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
> em0: <Intel(R) PRO/1000 Network Connection 6.9.5> port 0x3000-0x303f
> mem 0xf2500000-0xf251ffff,0xf2520000-0xf253ffff irq 17 at device 3.0
> on pci16
> em0: [FILTER]
> em0: Ethernet address: 00:11:85:ae:c2:04
> isab0: <PCI-ISA bridge> at device 31.0 on pci0
> isa0: <ISA bus> on isab0
> atapci0: <Intel ICH5 UDMA100 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0x54e0-0x54ef irq 18 at device
> 31.1 on pci0
> ata0: <ATA channel 0> on atapci0
> ata0: [ITHREAD]
> ata1: <ATA channel 1> on atapci0
> ata1: [ITHREAD]
> atapci1: <Intel ICH5 SATA150 controller> port
> 0x5810-0x5817,0x5828-0x582b,0x5818-0x581f,0x582c-0x582f,0x54f0-0x54ff
> irq 18 at device 31.2 on pci0
> atapci1: [ITHREAD]
> ata2: <ATA channel 0> on atapci1
> ata2: [ITHREAD]
> ata3: <ATA channel 1> on atapci1
> ata3: [ITHREAD]
> pci0: <multimedia, audio> at device 31.5 (no driver attached)
> acpi_button0: <Power Button> on acpi0
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> atkbd0: [ITHREAD]
> psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
> psm0: [GIANT-LOCKED]
> psm0: [ITHREAD]
> psm0: model Generic PS/2 mouse, device ID 0
> sio0: <Standard PC COM port> port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0
> sio0: type 16550A
> sio0: [FILTER]
> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
> fdc0: [FILTER]
> cpu0: <ACPI CPU> on acpi0
> est0: <Enhanced SpeedStep Frequency Control> on cpu0
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 112d0000112d
> device_attach: est0 attach returned 6
> p4tcc0: <CPU Frequency Thermal Control> on cpu0
> cpu1: <ACPI CPU> on acpi0
> est1: <Enhanced SpeedStep Frequency Control> on cpu1
> est: CPU supports Enhanced Speedstep, but is not recognized.
> est: cpu_vendor GenuineIntel, msr 112d0000112d
> device_attach: est1 attach returned 6
> p4tcc1: <CPU Frequency Thermal Control> on cpu1
> pmtimer0 on isa0
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode
> ppc0: FIFO with 16/16/13 bytes threshold
> ppbus0: <Parallel port bus> on ppc0
> ppbus0: [ITHREAD]
> plip0: <PLIP network interface> on ppbus0
> plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> ppc0: [GIANT-LOCKED]
> ppc0: [ITHREAD]
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> sio1: configured irq 3 not in bitmap of probed irqs 0
> sio1: port may not be enabled
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> Timecounters tick every 1.000 msec
> ipfw2 (+ipvfirewire0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
> firewire0: bus manager 0 (me)
> 6) initialized, divert enabled, nat loadable, rule-based forwarding
> disabled, default to accept, logging disabled
> ad0: 305245MB <MAXTOR STM3320620A 3.AAE> at ata0-master UDMA100
> ad1: 476940MB <WDC WD5000AAJB-00UHA0 07.01N01> at ata0-slave UDMA100
> acd0: CDROM <LTN486S/YKS4> at ata1-master PIO4
> acd1: CDRW <LG CD-RW CED-8080B/1.20> at ata1-slave PIO4
> Waiting 5 seconds for SCSI devices to settle
> acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
> acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00
> cd0 at ata1 bus 0 target 0 lun 0
> cd0: <LITEON CD-ROM LTN486S YKS4> Removable CD-ROM SCSI-0 device
> cd0: 16.000MB/s transfers
> cd0: Attempt to query device size failed: NOT READY, Medium not present
> cd1 at ata1 bus 0 target 1 lun 0
> cd1: <LG CD-RW CED-8080B 1.20> Removable CD-ROM SCSI-0 device
> cd1: 16.000MB/s transfers
> cd1: Attempt to query device size failed: NOT READY, Medium not present
> SMP: AP CPU #1 Launched!
> Trying to mount root from ufs:/dev/ad0s1a
> pcm0: <Intel ICH5 (82801EB)> port 0x5000-0x50ff,0x5400-0x543f mem
> 0xf2600400-0xf26005ff,0xf2600600-0xf26006ff irq 17 at device 31.5 on
> pci0
> pcm0: [ITHREAD]
> pcm0: <Analog Devices AD1981B AC97 Codec>
> nvidia0: <Unknown> on vgapci0
> vgapci0: child nvidia0 requested pci_enable_busmaster
> vgapci0: child nvidia0 requested pci_enable_io
> nvidia0: [GIANT-LOCKED]
> nvidia0: [ITHREAD]
>
> -----------------Messages Output----------------------
>
> Oct 20 22:17:17 pcbsd savecore: no dumps found
> Oct 20 22:17:18 pcbsd kernel: pcm0: <Intel ICH5 (82801EB)> port
> 0x5000-0x50ff,0x5400-0x543f mem
> 0xf2600400-0xf26005ff,0xf2600600-0xf26006ff irq 17 at device 31.5 on
> pci0
> Oct 20 22:17:18 pcbsd kernel: pcm0: [ITHREAD]
> Oct 20 22:17:18 pcbsd kernel: pcm0: <Analog Devices AD1981B AC97 Codec>
> Oct 20 22:17:21 pcbsd ntpd[1284]: ntpd 4.2.4p5-a Mon Oct  6 10:47:08
> EDT 2008 (1)
> Oct 20 22:17:23 pcbsd ntpd_initres[1304]: host name not found: 0.pool.ntp.org
> Oct 20 22:17:23 pcbsd ntpd_initres[1304]: couldn't resolve
> `0.pool.ntp.org', giving up on it
> Oct 20 22:17:23 pcbsd ntpd_initres[1304]: host name not found: 1.pool.ntp.org
> Oct 20 22:17:23 pcbsd ntpd_initres[1304]: couldn't resolve
> `1.pool.ntp.org', giving up on it
> Oct 20 22:17:23 pcbsd ntpd_initres[1304]: host name not found: 2.pool.ntp.org
> Oct 20 22:17:23 pcbsd ntpd_initres[1304]: couldn't resolve
> `2.pool.ntp.org', giving up on it
> Oct 20 22:18:47 pcbsd kernel: nvidia0: <Unknown> on vgapci0
> Oct 20 22:18:47 pcbsd kernel: vgapci0: child nvidia0 requested
> pci_enable_busmaster
> Oct 20 22:18:47 pcbsd kernel: vgapci0: child nvidia0 requested pci_enable_io
> Oct 20 22:18:47 pcbsd kernel: nvidia0: [GIANT-LOCKED]
> Oct 20 22:18:47 pcbsd kernel: nvidia0: [ITHREAD]
> Oct 20 22:19:01 pcbsd kdm_greet[4154]: Cannot set locale. Translations
> will not work.
> Oct 20 22:19:36 pcbsd sudo:       IR : TTY=unknown ; PWD=/usr/home/IR
> ; USER=root ; COMMAND=/PCBSD/SystemUpdater/bin/SystemUpdater.sh
> Oct 20 22:22:41 pcbsd su: IR to root on /dev/ttyp3
> Oct 20 22:22:41 pcbsd su: IR to root on /dev/ttyp3
>
> =================================
> End PCBSD 7.0.1 dmesg
> =================================
>
>
> I have tried installing with the several modes reported above.  I have
> tried booting using PCBSD 1.5.1 and OpenBSD without success, both of
> which hung at the same  place. But I can boot NetBSD Live . . . (and
> that is not necessarily a surprise) so here is the dmesg from NetBSD:
>
> ===========================
> Begin NetBSD dmesg:
> ===========================
> Copyright (c) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
>     The NetBSD Foundation, Inc.  All rights reserved.
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>     The Regents of the University of California.  All rights reserved.
>
> NetBSD 4.0_BETA (CDROM_GENERIC) #1: Wed Sep 27 20:11:04 CEST 2006
> root at vmware:/usr/src/sys/arch/i386/compile/GENERIC_CD.MP
> multiboot: Information structure flags: 0x000003e7
> multiboot: Boot loader: GNU GRUB 0.97
> multiboot: Command line: /smp.gz
> multiboot: 635 KB lower memory, 3406804 KB upper memory
> total memory = 3327 MB
> avail memory = 3259 MB
> timecounter: Timecounters tick every 10.000 msec
> timecounter: Timecounter "i8254" frequency 1193182 Hz quality 100
> timecounter: selected timecounter "i8254" frequency 1193182 Hz quality 100
> BIOS32 rev. 0 found at 0xea020
> mainbus0 (root)
> mainbus0: Intel MP Specification (Version 1.4) (HP       workstation )
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel (686-class), 3400.32 MHz, id 0xf41
> cpu0: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
> cpu0: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
> cpu0: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
> cpu0: features2 649d<SSE3,MONITOR,DS-CPL,EST,CID,xTPR>
> cpu0: features3 20000000<EM64T>
> cpu0: "Intel(R) Xeon(TM) CPU 3.40GHz"
> cpu0: I-cache 12K uOp cache 8-way
> cpu0: L2 cache 1 MB 64B/line 8-way
> cpu0: ITLB 4K/4M: 128 entries
> cpu0: DTLB 4K/4M: 64 entries
> cpu0: using thermal monitor 1
> cpu0: Enhanced SpeedStep disabled by BIOS
> cpu0: calibrating local timer
> cpu0: apic clock running at 200 MHz
> cpu0: 32 page colors
> cpu1 at mainbus0: apid 6 (application processor)
> cpu1: starting
> cpu1: Intel (686-class), 3400.13 MHz, id 0xf41
> cpu1: features bfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR>
> cpu1: features bfebfbff<PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX>
> cpu1: features bfebfbff<FXSR,SSE,SSE2,SS,HTT,TM,SBF>
> cpu1: features2 649d<SSE3,MONITOR,DS-CPL,EST,CID,xTPR>
> cpu1: features3 20000000<EM64T>
> cpu1: "Intel(R) Xeon(TM) CPU 3.40GHz"
> cpu1: I-cache 12K uOp cache 8-way
> cpu1: L2 cache 1 MB 64B/line 8-way
> cpu1: ITLB 4K/4M: 128 entries
> cpu1: DTLB 4K/4M: 64 entries
> cpu1: using thermal monitor 1
> cpu1: Enhanced SpeedStep disabled by BIOS
> mpbios: bus 0 is type PCI
> mpbios: bus 32 is type PCI
> mpbios: bus 1 is type PCI
> mpbios: bus 2 is type PCI
> mpbios: bus 11 is type PCI
> mpbios: bus 64 is type PCI
> mpbios: bus 16 is type PCI
> mpbios: bus 31 is type ISA
> ioapic0 at mainbus0 apid 1 (I/O APIC)
> ioapic0: pa 0xfec00000, version 20, 24 pins
> ioapic1 at mainbus0 apid 2 (I/O APIC)
> ioapic1: pa 0xfec81000, version 20, 24 pins
> ioapic2 at mainbus0 apid 3 (I/O APIC)
> ioapic2: pa 0xfec81400, version 20, 24 pins
> pci0 at mainbus0 bus 0: configuration mode 1
> pci0: i/o space, memory space enabled, rd/line, rd/mult, wr/inv ok
> pchb0 at pci0 dev 0 function 0
> pchb0: Intel product 0x359e (rev. 0x0c)
> ppb0 at pci0 dev 2 function 0: Intel E7525 PCI Express Port A (rev. 0x0c)
> pci1 at ppb0 bus 32
> pci1: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb1 at pci0 dev 3 function 0: Intel E7525 PCI Express Port A1 (rev. 0x0c)
> pci2 at ppb1 bus 1
> pci2: i/o space, memory space enabled, rd/line, wr/inv ok
> ppb2 at pci2 dev 0 function 0: Intel 6700PXH PCI Express-to-PCI Bridge
> #0 (rev. 0x09)
> pci3 at ppb2 bus 2
> pci3: i/o space, memory space enabled, rd/line, wr/inv ok
> mpt0 at pci3 dev 5 function 0: LSI Logic 53c1030 Ultra320 SCSI
> mpt0: interrupting at ioapic1 pin 6 (irq 10)
> scsibus0 at mpt0: 16 targets, 8 luns per target
> mpt1 at pci3 dev 5 function 1: LSI Logic 53c1030 Ultra320 SCSI
> mpt1: interrupting at ioapic1 pin 7 (irq 11)
> scsibus1 at mpt1: 16 targets, 8 luns per target
> Intel product 0x0326 (interrupt system, interface 0x20, revision 0x09)
> at pci2 dev 0 function 1 not configured
> ppb3 at pci2 dev 0 function 2: Intel 6700PXH PCI Express-to-PCI Bridge
> #1 (rev. 0x09)
> pci4 at ppb3 bus 11
> pci4: i/o space, memory space enabled, rd/line, wr/inv ok
> Intel product 0x0327 (interrupt system, interface 0x20, revision 0x09)
> at pci2 dev 0 function 3 not configured
> ppb4 at pci0 dev 4 function 0: Intel E7525 PCI Express Port B (rev. 0x0c)
> pci5 at ppb4 bus 64
> pci5: i/o space, memory space enabled, rd/line, wr/inv ok
> vga1 at pci5 dev 0 function 0: NVIDIA product 0x00f8 (rev. 0xa2)
> wsdisplay0 at vga1 kbdmux 1: console (80x25, vt100 emulation)
> wsmux1: connecting to wsdisplay0
> uhci0 at pci0 dev 29 function 0: Intel 82801EB/ER USB UHCI Controller
> (rev. 0x02)
> uhci0: interrupting at ioapic0 pin 16 (irq 3)
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 29 function 1: Intel 82801EB/ER USB UHCI Controller
> (rev. 0x02)
> uhci1: interrupting at ioapic0 pin 19 (irq 11)
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> uhci2 at pci0 dev 29 function 2: Intel 82801EB/ER USB UHCI Controller
> (rev. 0x02)
> uhci2: interrupting at ioapic0 pin 18 (irq 10)
> usb2 at uhci2: USB revision 1.0
> uhub2 at usb2
> uhub2: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub2: 2 ports with 2 removable, self powered
> uhci3 at pci0 dev 29 function 3: Intel 82801EB/ER USB UHCI Controller
> (rev. 0x02)
> uhci3: interrupting at ioapic0 pin 16 (irq 3)
> usb3 at uhci3: USB revision 1.0
> uhub3 at usb3
> uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1
> uhub3: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 29 function 7: Intel 82801EB/ER USB EHCI Controller
> (rev. 0x02)
> ehci0: interrupting at ioapic0 pin 23 (irq 3)
> ehci0: BIOS has given up ownership
> ehci0: EHCI version 1.0
> ehci0: companion controllers, 2 ports each: uhci0 uhci1 uhci2 uhci3
> usb4 at ehci0: USB revision 2.0
> uhub4 at usb4
> uhub4: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1
> uhub4: 8 ports with 8 removable, self powered
> ppb5 at pci0 dev 30 function 0: Intel 82801BA Hub-PCI Bridge (rev. 0xc2)
> pci6 at ppb5 bus 16
> pci6: i/o space, memory space enabled
> fwohci0 at pci6 dev 2 function 0: Texas Instruments TSB43AA22/A IEEE
> 1394 Host Controller (rev. 0x00)
> fwohci0: interrupting at ioapic0 pin 16 (irq 3)
> fwohci0: OHCI version 1.10 (ROM=1)
> fwohci0: No. of Isochronous channels is 4.
> fwohci0: EUI64 10:cf:fd:00:00:13:4d:cd
> fwohci0: Phy 1394a available S400, 2 ports.
> fwohci0: Link S400, max_rec 2048 bytes.
> ieee1394if0 at fwohci0: IEEE1394 bus
> fwip0 at ieee1394if0: IP over IEEE1394
> fwohci0: Initiate bus reset
> wm0 at pci6 dev 3 function 0: Intel i82541GI 1000BASE-T Ethernet, rev. 5
> wm0: interrupting at ioapic0 pin 17 (irq 5)
> wm0: 32-bit 33MHz PCI bus
> wm0: 256 word (8 address bits) MicroWire EEPROM
> wm0: Ethernet address 00:11:85:6c:d6:cd
> igphy0 at wm0 phy 1: Intel IGP01E1000 Gigabit PHY, rev. 0
> igphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FDX, auto
> pcib0 at pci0 dev 31 function 0
> pcib0: Intel 82801EB LPC Interface Bridge (rev. 0x02)
> piixide0 at pci0 dev 31 function 1
> piixide0: Intel 82801EB IDE Controller (ICH5) (rev. 0x02)
> piixide0: bus-master DMA support present
> piixide0: primary channel configured to compatibility mode
> piixide0: primary channel interrupting at ioapic0 pin 14 (irq 14)
> atabus0 at piixide0 channel 0
> piixide0: secondary channel configured to compatibility mode
> piixide0: secondary channel interrupting at ioapic0 pin 15 (irq 15)
> atabus1 at piixide0 channel 1
> piixide1 at pci0 dev 31 function 2
> piixide1: Intel 82801EB Serial ATA Controller (rev. 0x02)
> piixide1: bus-master DMA support present
> piixide1: primary channel configured to native-PCI mode
> piixide1: using ioapic0 pin 18 (irq 10) for native-PCI interrupt
> atabus2 at piixide1 channel 0
> piixide1: secondary channel configured to native-PCI mode
> atabus3 at piixide1 channel 1
> auich0 at pci0 dev 31 function 5: i82801EB (ICH5) AC-97 Audio
> auich0: interrupting at ioapic0 pin 17 (irq 5)
> auich0: ac97: Analog Devices AD1981B codec; headphone, 20 bit DAC, no 3D stereo
> auich0: ac97: ext id 605<AC97_22,AMAP,SPDIF,VRA>
> isa0 at pcib0
> lpt0 at isa0 port 0x378-0x37b irq 7
> com0 at isa0 port 0x3f8-0x3ff irq 4: ns16550a, working fifo
> pckbc0 at isa0 port 0x60-0x64
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> attimer0 at isa0 port 0x40-0x43: AT Timer
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: PC speaker (CPU-intensive output)
> sysbeep0 at pcppi0
> isapnp0 at isa0 port 0x279: ISA Plug 'n Play device support
> npx0 at isa0 port 0xf0-0xff
> npx0: using exception 16
> fdc0 at isa0 port 0x3f0-0x3f7 irq 6 drq 2
> pcppi0: attached to attimer0
> isapnp0: no ISA Plug 'n Play devices found
> ioapic0: enabling
> ioapic1: enabling
> ioapic2: enabling
> fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
> ieee1394if0: 1 nodes, maxhop <= 0, cable IRM = 0 (me)
> ieee1394if0: bus manager 0 (me)
> timecounter: Timecounter "clockinterrupt" frequency 100 Hz quality 0
> auich0: measured ac97 link rate at 48007 Hz, will use 48000 Hz
> audio0 at auich0: full duplex, mmap, independent
> Kernelized RAIDframe activated
> scsibus0: waiting 2 seconds for devices to settle...
> scsibus1: waiting 2 seconds for devices to settle...
> atapibus0 at atabus1: 2 targets
> cd0 at atapibus0 drive 0: <HL-DT-ST RW/DVD GCC-H20N, , 1.04> cdrom removable
> cd0: 32-bit data port
> cd0: drive supports PIO mode 4, DMA mode 2, Ultra-DMA mode 2 (Ultra/33)
> cd0(piixide0:1:0): using PIO mode 4, Ultra-DMA mode 2 (Ultra/33) (using DMA)
> sd0 at scsibus0 target 0 lun 0: <ModusLnk, MXJ3073SC680600T, M108> disk fixed
> sd0: 70136 MB, 78753 cyl, 2 head, 911 sec, 512 bytes/sect x 143638992 sectors
> sd0: sync (6.25ns offset 127), 16-bit (320.000MB/s) transfers, tagged queueing
> sd1 at scsibus0 target 4 lun 0: <ModusLnk, MXJ3073SC680600T, M108> disk fixed
> sd1: 70136 MB, 78753 cyl, 2 head, 911 sec, 512 bytes/sect x 143638992 sectors
> sd1: sync (6.25ns offset 127), 16-bit (320.000MB/s) transfers, tagged queueing
> boot device: <unknown>
> root on cd0a
> cpu1: CPU 6 running
> =========================
> End NetBSD dmesg
> =========================
>
> Thanks in advance for considering this challenge.
>
> Ian Robinson
> Salem, Ohio
> _______________________________________________
> Testing mailing list
> Testing at lists.pcbsd.org
> http://lists.pcbsd.org/mailman/listinfo/testing
>
>   
Will PC-BSD launch with only one processor installed? Have you tried 
removing some of the memory modules?

I just can't see an issue with software because as you report you see 
the copyright part which means the kernel has loaded up. That said, 
obviously parts of the kernel aren't loading up.

Regards,
Brodey


More information about the Testing mailing list