[PC-BSD Testing] USB Mouse and Flash Player not working properly

flat.rose flat.rose at gmail.com
Sun Aug 31 13:39:42 PDT 2008


same here- I have sound but no video, plus my kmix isnt working in any way -
I hear the same lvl of sound no matter how hight I set the slider in the
tray/mixer dialog. Even with mute option enabled I can hear sound. Fix,
please.

On Sun, Aug 31, 2008 at 11:33 AM, Casey <caseyclaydon at fastmail.com.au>wrote:

> When I install Beta 1,  the USB Mouse Logitech MX 510 does not get
> detected,  and I have to change it over to another port which then
> works.  And after Beta 1 has been installed,  the mouse does not get
> detected again and have to change it to another port for it to work again.
>
> The Flash Player installed on PC-BSD does not work properly on youtube
> with the video playing with sound but no picture.
>
> The Motherboard is a AM2 Gigabyte GA-MA69GM-S2H,  I have attached the
> diagnostic sheet,
>
>
>
> PC-BSD 7-BETA Diagnostic Sheet
> Generated: Sun Aug 31 17:28:10 EST 2008
>
> -----------------Dmesg Output-------------------------
>
> Copyright (c) 1992-2008 The FreeBSD Project.
> Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
>    The Regents of the University of California. All rights reserved.
> FreeBSD is a registered trademark of The FreeBSD Foundation.
> FreeBSD 7.0-STABLE #37: Mon Aug 25 13:36:21 EDT 2008
>    root at pcbsd:/usr/obj/usr/src/sys/PCBSD
> Timecounter "i8254" frequency 1193182 Hz quality 0
> CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 3600+ (1904.33-MHz
> 686-class CPU)
>  Origin = "AuthenticAMD"  Id = 0x60fb1  Stepping = 1
>
>
> Features=0x178bfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,MMX,FXSR,SSE,SSE2,HTT>
>  Features2=0x2001<SSE3,CX16>
>  AMD Features=0xea500800<SYSCALL,NX,MMX+,FFXSR,RDTSCP,LM,3DNow!+,3DNow!>
>  AMD Features2=0x11f<LAHF,CMP,SVM,ExtAPIC,CR8,Prefetch>
>  Cores per package: 2
> real memory  = 468582400 (446 MB)
> avail memory = 444547072 (423 MB)
> ACPI APIC Table: <GBT    GBTUACPI>
> FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
>  cpu0 (BSP): APIC ID:  0
>  cpu1 (AP): APIC ID:  1
> ioapic0: Changing APIC ID to 2
> ioapic0 <Version 2.1> irqs 0-23 on motherboard
> kbd1 at kbdmux0
> ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413)
> acpi0: <GBT GBTUACPI> on motherboard
> acpi0: [ITHREAD]
> acpi0: Power Button (fixed)
> acpi0: reservation of 0, a0000 (3) failed
> acpi0: reservation of 100000, 1bde0000 (3) failed
> Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
> acpi_timer0: <32-bit timer at 3.579545MHz> port 0x4008-0x400b on acpi0
> pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
> pci0: <ACPI PCI bus> on pcib0
> pcib1: <ACPI PCI-PCI bridge> at device 1.0 on pci0
> pci1: <ACPI PCI bus> on pcib1
> vgapci0: <VGA-compatible display> port 0xee00-0xeeff mem
> 0xf8000000-0xfbffffff,0xfdfe0000-0xfdfeffff,0xfde00000-0xfdefffff irq 18
> at device 5.0 on pci1
> pci1: <multimedia> at device 5.2 (no driver attached)
> atapci0: <ATI IXP600 SATA300 controller> port
> 0xff00-0xff07,0xfe00-0xfe03,0xfd00-0xfd07,0xfc00-0xfc03,0xfb00-0xfb0f
> mem 0xfe02f000-0xfe02f3ff irq 22 at device 18.0 on pci0
> atapci0: [ITHREAD]
> atapci0: AHCI Version 01.10 controller with 4 ports detected
> ata2: <ATA channel 0> on atapci0
> ata2: [ITHREAD]
> ata3: <ATA channel 1> on atapci0
> ata3: [ITHREAD]
> ata4: <ATA channel 2> on atapci0
> ata4: [ITHREAD]
> ata5: <ATA channel 3> on atapci0
> ata5: [ITHREAD]
> ohci0: <OHCI (generic) USB controller> mem 0xfe02e000-0xfe02efff irq 16
> at device 19.0 on pci0
> ohci0: [GIANT-LOCKED]
> ohci0: [ITHREAD]
> usb0: OHCI version 1.0, legacy support
> usb0: SMM does not respond, resetting
> usb0: <OHCI (generic) USB controller> on ohci0
> usb0: USB revision 1.0
> uhub0: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb0
> uhub0: 2 ports with 2 removable, self powered
> ohci1: <OHCI (generic) USB controller> mem 0xfe02d000-0xfe02dfff irq 17
> at device 19.1 on pci0
> ohci1: [GIANT-LOCKED]
> ohci1: [ITHREAD]
> usb1: OHCI version 1.0, legacy support
> usb1: SMM does not respond, resetting
> usb1: <OHCI (generic) USB controller> on ohci1
> usb1: USB revision 1.0
> uhub1: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb1
> uhub1: 2 ports with 2 removable, self powered
> ohci2: <OHCI (generic) USB controller> mem 0xfe02c000-0xfe02cfff irq 18
> at device 19.2 on pci0
> ohci2: [GIANT-LOCKED]
> ohci2: [ITHREAD]
> usb2: OHCI version 1.0, legacy support
> usb2: SMM does not respond, resetting
> usb2: <OHCI (generic) USB controller> on ohci2
> usb2: USB revision 1.0
> uhub2: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb2
> uhub2: 2 ports with 2 removable, self powered
> ohci3: <OHCI (generic) USB controller> mem 0xfe02b000-0xfe02bfff irq 17
> at device 19.3 on pci0
> ohci3: [GIANT-LOCKED]
> ohci3: [ITHREAD]
> usb3: OHCI version 1.0, legacy support
> usb3: SMM does not respond, resetting
> usb3: <OHCI (generic) USB controller> on ohci3
> usb3: USB revision 1.0
> uhub3: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb3
> uhub3: 2 ports with 2 removable, self powered
> ohci4: <OHCI (generic) USB controller> mem 0xfe02a000-0xfe02afff irq 18
> at device 19.4 on pci0
> ohci4: [GIANT-LOCKED]
> ohci4: [ITHREAD]
> usb4: OHCI version 1.0, legacy support
> usb4: SMM does not respond, resetting
> usb4: <OHCI (generic) USB controller> on ohci4
> usb4: USB revision 1.0
> uhub4: <ATI OHCI root hub, class 9/0, rev 1.00/1.00, addr 1> on usb4
> uhub4: 2 ports with 2 removable, self powered
> ehci0: <EHCI (generic) USB 2.0 controller> mem 0xfe029000-0xfe0290ff irq
> 19 at device 19.5 on pci0
> ehci0: [GIANT-LOCKED]
> ehci0: [ITHREAD]
> usb5: EHCI version 1.0
> usb5: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4
> usb5: <EHCI (generic) USB 2.0 controller> on ehci0
> usb5: USB revision 2.0
> uhub5: <ATI EHCI root hub, class 9/0, rev 2.00/1.00, addr 1> on usb5
> uhub5: 10 ports with 10 removable, self powered
> pci0: <serial bus, SMBus> at device 20.0 (no driver attached)
> atapci1: <ATI IXP600 UDMA133 controller> port
> 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xf900-0xf90f at device 20.1 on pci0
> ata0: <ATA channel 0> on atapci1
> ata0: [ITHREAD]
> pci0: <multimedia> at device 20.2 (no driver attached)
> isab0: <PCI-ISA bridge> at device 20.3 on pci0
> isa0: <ISA bus> on isab0
> pcib2: <ACPI PCI-PCI bridge> at device 20.4 on pci0
> pci2: <ACPI PCI bus> on pcib2
> fwohci0: <Texas Instruments TSB43AB23> mem
> 0xfddff000-0xfddff7ff,0xfddf8000-0xfddfbfff irq 22 at device 14.0 on pci2
> fwohci0: [FILTER]
> fwohci0: OHCI version 1.10 (ROM=1)
> fwohci0: No. of Isochronous channels is 4.
> fwohci0: EUI64 00:1a:4d:00:00:e9:cd:00
> fwohci0: Phy 1394a available S400, 3 ports.
> fwohci0: Link S400, max_rec 2048 bytes.
> firewire0: <IEEE1394(FireWire) bus> on fwohci0
> fwe0: <Ethernet over FireWire> on firewire0
> if_fwe0: Fake Ethernet address: 02:1a:4d:e9:cd:00
> fwe0: Ethernet address: 02:1a:4d:e9:cd:00
> fwip0: <IP over FireWire> on firewire0
> fwip0: Firewire address: 00:1a:4d:00:00:e9:cd:00 @ 0xfffe00000000, S400,
> maxrec 2048
> sbp0: <SBP-2/SCSI over FireWire> on firewire0
> dcons_crom0: <dcons configuration ROM> on firewire0
> dcons_crom0: bus_addr 0x12b8000
> fwohci0: Initiate bus reset
> fwohci0: BUS reset
> fwohci0: node_id=0xc800ffc0, gen=1, CYCLEMASTER mode
> re0: <RealTek 8169SC/8110SC Single-chip Gigabit Ethernet> port
> 0xde00-0xdeff mem 0xfddfe000-0xfddfe0ff irq 23 at device 15.0 on pci2
> re0: Chip rev. 0x18000000
> re0: MAC rev. 0x00000000
> miibus0: <MII bus> on re0
> rgephy0: <RTL8169S/8110S/8211B media interface> PHY 1 on miibus0
> rgephy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, 1000baseT,
> 1000baseT-FDX, auto
> re0: Ethernet address: 00:1a:4d:86:a3:85
> re0: [FILTER]
> acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on
> acpi0
> Timecounter "HPET" frequency 14318180 Hz quality 900
> cpu0: <ACPI CPU> on acpi0
> powernow0: <PowerNow! K8> on cpu0
> cpu1: <ACPI CPU> on acpi0
> powernow1: <PowerNow! K8> on cpu1
> acpi_button0: <Power Button> on acpi0
> fdc0: <floppy drive controller> port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
> fdc0: [FILTER]
> sio0: <16550A-compatible COM port> port 0x2f8-0x2ff irq 3 flags 0x10 on
> acpi0
> sio0: type 16550A
> sio0: [FILTER]
> atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64 irq 1 on acpi0
> atkbd0: <AT Keyboard> irq 1 on atkbdc0
> kbd0 at atkbd0
> atkbd0: [GIANT-LOCKED]
> atkbd0: [ITHREAD]
> pmtimer0 on isa0
> ppc0: <Parallel port> at port 0x378-0x37f irq 7 on isa0
> ppc0: Generic chipset (NIBBLE-only) in COMPATIBLE mode
> ppbus0: <Parallel port bus> on ppc0
> ppbus0: [ITHREAD]
> plip0: <PLIP network interface> on ppbus0
> plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag
> lpt0: <Printer> on ppbus0
> lpt0: Interrupt-driven port
> ppi0: <Parallel I/O> on ppbus0
> ppc0: [GIANT-LOCKED]
> ppc0: [ITHREAD]
> sc0: <System console> at flags 0x100 on isa0
> sc0: VGA <16 virtual consoles, flags=0x300>
> vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
> uhub1: device problem (TIMEOUT), disabling port 1
> Timecounters tick every 1.000 msec
> ipfw2 (+ipv6) initialized, divert enabled, nat loadable, rule-based
> forwarding disabled, default to accept, logging disablefirewire0: 1
> nodes, maxhop <= 0, cable IRM = 0 (me)
> firewire0: bus manager 0 (me)
> d
> ad0: 76318MB <MAXTOR STM380215AS 3.AAD> at ata2-master SATA150
> acd0: DVDR <HL-DT-ST DVDRAM GH20LS10/FL01> at ata3-master SATA150
> acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00
> 0x01
> acd0: FAILURE - INQUIRY ILLEGAL REQUEST asc=0x24 ascq=0x00 sks=0x40 0x00
> 0x01
> SMP: AP CPU #1 Launched!
> cd0 at ata2 bus 0 target 0 lun 0
> cd0: <HL-DT-ST DVDRAM GH20LS10 FL01> Removable CD-ROM SCSI-0 device
> cd0: 3.300MB/s transfers
> cd0: Attempt to query device size failed: NOT READY, Medium not present
> Trying to mount root from ufs:/dev/ad0s1a
> re0: link state changed to DOWN
> pcm0: <ATI SB600 High Definition Audio Controller> mem
> 0xfe024000-0xfe027fff irq 16 at device 20.2 on pci0
> pcm0: [ITHREAD]
> pcm0: <HDA Codec: Realtek ALC885>
> pcm0: <HDA Driver Revision: 20080420_0052>
> pcm1: <ATI (Unknown) High Definition Audio Controller> mem
> 0xfdffc000-0xfdffffff irq 19 at device 5.2 on pci1
> pcm1: [ITHREAD]
> pcm1: <HDA Codec: Unknown Codec>
> pcm1: <HDA Driver Revision: 20080420_0052>
> re0: link state changed to UP
> ums0: <Logitech USB-PS/2 Optical Mouse, class 0/0, rev 2.00/21.00, addr
> 2> on uhub0
> ums0: 8 buttons and Z dir.
>
> -----------------Messages Output----------------------
>
> Aug 31 17:07:48 pcbsd dhclient: New Broadcast Address (re0): 192.168.1.255
> Aug 31 17:07:48 pcbsd dhclient: New Routers (re0): 192.168.1.1
> Aug 31 17:07:48 pcbsd kernel: pcm0: <ATI SB600 High Definition Audio
> Controller> mem 0xfe024000-0xfe027fff irq 16 at device 20.2 on pci0
> Aug 31 17:07:48 pcbsd kernel: pcm0: [ITHREAD]
> Aug 31 17:07:48 pcbsd kernel: pcm0: <HDA Codec: Realtek ALC885>
> Aug 31 17:07:48 pcbsd kernel: pcm0: <HDA Driver Revision: 20080420_0052>
> Aug 31 17:07:48 pcbsd kernel: pcm1: <ATI (Unknown) High Definition Audio
> Controller> mem 0xfdffc000-0xfdffffff irq 19 at device 5.2 on pci1
> Aug 31 17:07:48 pcbsd kernel: pcm1: [ITHREAD]
> Aug 31 17:07:48 pcbsd kernel: pcm1: <HDA Codec: Unknown Codec>
> Aug 31 17:07:48 pcbsd kernel: pcm1: <HDA Driver Revision: 20080420_0052>
> Aug 31 17:07:49 pcbsd kernel: re0: link state changed to UP
> Aug 31 17:07:54 pcbsd ntpd[1251]: ntpd 4.2.0-a Sun Aug 24 11:33:02 EDT
> 2008 (1)
> Aug 31 17:08:36 pcbsd root: Unknown USB device: vendor 0x046d product
> 0xc01d bus uhub0
> Aug 31 17:08:36 pcbsd kernel: ums0: <Logitech USB-PS/2 Optical Mouse,
> class 0/0, rev 2.00/21.00, addr 2> on uhub0
> Aug 31 17:08:36 pcbsd kernel: ums0: 8 buttons and Z dir.
> Aug 31 17:08:43 pcbsd sudo:    Casey : TTY=unknown ; PWD=/usr/home/Casey
> ; USER=root ; COMMAND=/PCBSD/SystemUpdater/bin/SystemUpdater.sh
> Aug 31 17:12:57 pcbsd ntpd[1251]: time reset +0.681152 s
> Aug 31 17:25:53 pcbsd ntpd[1251]: kernel time sync enabled 2001
> Aug 31 17:26:32 pcbsd su: Casey to root on /dev/ttyp2
> Aug 31 17:26:32 pcbsd su: Casey to root on /dev/ttyp2
>
> ------------------RC File-----------------------------
>
> background_dhclient="YES"
> compat5x_enable="YES"
> sshd_enable="YES"
> usbd_enable="YES"
> moused_type="auto"
> moused_enable="YES"
> devd_enable="YES"
> devfs_system_ruleset="devfsrules_common"
> sendmail_enable="NO"
> sendmail_rebuild_aliases="YES"
> ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/kde4/lib
> /usr/local/lib/compat/pkg"
>
> # Enable the pcbsd startup / shutdown scripts
> pcbsdinit_enable="YES"
>
> #Enable samba server
> samba_enable="YES"
>
> # Disable LPD
> lpd_enable="NO"
>
> # Enable CUPS
> cupsd_enable="YES"
> linux_enable="YES"
>
> # FSCK Enhancements
> fsck_y_enable="YES"
> background_fsck="NO"
>
> # tmpmfs Flags
> tmpmfs="YES"
> tmpsize="800m"
> tmpmfs_flags="-S"
>
> # Denyhosts Startup
> denyhosts_enable="YES"
>
> # powerd: adaptive speed while on AC power, adaptive while on battery power
> powerd_enable="YES"
> powerd_flags="-a adaptive -b adaptive" # set CPU frequency
>
> # enable HALd
> dbus_enable="YES"
> polkitd_enable="YES"
> hald_enable="YES"
>
> # Enables support for HPLIP
> hpiod_enable="NO"
> hpssd_enable="NO"
>
> # ntpdate is deprecated and will eventually be removed from the
> distribution since
> # the same functionality is available in ntpd(8).
> # Without "ntpd_sync_on_start" option, ntpd refuses to perform an
> # initial correction if the clock offset is too large.
> #
> ntpd_enable="YES"
> ntpd_sync_on_start="YES"
>
> # Enable the firewall
> pf_rules="/etc/pf.conf"
> pf_enable="YES"
> pf_flags=""
>
> # Enable ipfw and open it by default since we have PF
> firewall_enable="YES"
> firewall_type="open"
>
> snddetect_enable="YES"
> mixer_enable="YES"
> hostname="pcbsd"
> ifconfig_re0="DHCP"
>
> ------------------Loader File-------------------------
>
> linux_load="YES"
> ulpt_load="YES"
> #vesa_load="YES"
> #splash_pcx_load="YES"
> #bitmap_load="YES"
> #bitmap_name="/boot/loading-screen.pcx"
> hw.ata.atapi_dma="1"
> autoboot_delay="5"
> kern.ipc.shmseg=1024
> kern.ipc.shmmni=1024
> legal.intel_iwi.license_ack=1
> legal.intel_wpi.license_ack=1
> wpi_load="YES"
>
> ------------------Free Space--------------------------
>
> Filesystem  1M-blocks Used Avail Capacity  Mounted on
> /dev/ad0s1a     73416 4875 62668     7%    /
> devfs               0    0     0   100%    /dev
> linprocfs           0    0     0   100%    /compat/linux/proc
> procfs              0    0     0   100%    /proc
> /dev/md0          771    0   709     0%    /tmp
>
> ------------------System Processes--------------------
>
> last pid: 13991;  load averages:  0.18,  0.23,  0.23  up 0+00:21:21
> 17:28:10
> 125 processes: 1 running, 124 sleeping
>
> Mem: 190M Active, 141M Inact, 73M Wired, 10M Cache, 53M Buf, 12M Free
> Swap: 512M Total, 512M Free
>
>
>  PID USERNAME    THR PRI NICE   SIZE    RES STATE  C   TIME   WCPU COMMAND
>  1738 Casey         1  47    0 64940K 27180K select 0   0:38  4.05% kded4
>  1596 root          1  44    0 92716K 61576K select 1   0:39  0.29% Xorg
> 12925 root          2  96    0 70152K 33192K select 1   0:00  0.29%
> systemsettings
>  1793 Casey         4  44    0 82340K 41984K ucond  1   0:00  0.20% plasma
>  3983 Casey         6  52    0 99384K 72328K ucond  1   0:11  0.00%
> firefox-bin
>  1876 Casey         1  44    0 56128K 22088K select 1   0:04  0.00% kmix
>  1897 Casey         1  96    0 60512K 22144K select 1   0:03  0.00%
> NetworkTray
>  1764 Casey         1  44    0 52056K 20408K select 1   0:03  0.00% kwin
>  1602 haldaemon     1  44    0  6644K  3776K select 0   0:02  0.00% hald
>  1780 Casey         1  44    0 74156K 31868K select 1   0:01  0.00% krunner
>  1824 root          1  44    0  3264K   904K select 1   0:01  0.00% moused
>  1217 root          1   8    0  3460K  1200K wait   0   0:01  0.00% sh
>  1923 root          1  44    0 60544K 24336K select 0   0:00  0.00%
> SystemUpdater
>  1841 root          1  46    0  5524K  1992K select 0   0:00  0.00%
> hald-addon-mouse-sy
>  1779 Casey         1  44    0 38624K 19328K select 1   0:00  0.00%
> nepomukservicestub
>  1258 root          1  44    0  3180K   868K select 1   0:00  0.00% powerd
>  1953 Casey         1  44    0 66396K 26192K select 1   0:00  0.00% korgac
>  1727 Casey         1  44    0 34960K 17092K select 0   0:00  0.00%
> klauncher
> _______________________________________________
> Testing mailing list
> Testing at lists.pcbsd.org
> http://lists.pcbsd.org/mailman/listinfo/testing
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.pcbsd.org/pipermail/testing/attachments/20080901/3818dd2f/attachment-0001.html 


More information about the Testing mailing list