[PC-BSD Support] Help with Netgear G54 wireless usb device

ashwin damle ashwindamle at gmail.com
Sat Nov 24 05:02:53 PST 2012


Dear PC-BSD users,

I am unable to connect to internet using my wireless-usb although it
is recognised correctly and I can see it in the network configuration.
The module urtw is loaded too and the status is associated. I am using
NETGEAR G54 wireless usb(WG111V3) which is in the supported hardware
list for PCBSD.

Could you please help me? I am copy-pasting the dmesg and sudo
/usr/local/bin/pc-wificonfig wlan0 output

-----------------------------------
Dmseg
-----------------------------------
Timecounter "TSC-low" frequency 9351769 Hz quality 1000
Root mount waiting for: usbus7 usbus3
Root mount waiting for: usbus7 usbus3
uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ugen7.2: <vendor 0x0846> at usbus7
urtw0: <vendor 0x0846 product 0x4260, class 0/0, rev 2.00/2.00, addr
2> on usbus7
urtw0: rtl8187b rf rtl8225z2 hwrev e
ugen4.2: <PIXART> at usbus4
ums0: <PIXART USB OPTICAL MOUSE, class 0/0, rev 1.10/1.00, addr 2> on usbus4
ums0: 3 buttons and [XYZ] coordinates ID=0
Root mount waiting for: usbus7
Trying to mount root from ufs:/dev/label/rootfs0 [rw,noatime]...
ugen2.2: <Broadcom Corp> at usbus2
siba_bwn0: <Unknown> mem 0xf69fc000-0xf69fffff irq 17 at device 0.0 on pci12
siba_bwn0: warn: multiple PCI(E) cores
siba_bwn0: unsupported coreid (USB 2.0 Device)
siba_bwn0: unsupported coreid (unknown)
siba_bwn0: unsupported coreid (Internal Memory)
siba_bwn0: unknown chipid 0x4322 for PLL & PMU init
bwn0 on siba_bwn0
bwn0: unsupported PHY type (4)
device_attach: bwn0 attach returned 6
Cuse4BSD v0.1.21 @ /dev/cuse
wlan0: Ethernet address: 00:24:e8:a7:e1:07
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
fuse4bsd: version 0.3.9-pre1, FUSE ABI 7.8
drm0: <Mobile Intel\M-B\M-. GM45 Express Chipset> on vgapci0
info: [drm] MSI enabled 1 message(s)
info: [drm] AGP at 0xe0000000 256MB
info: [drm] Initialized i915 1.6.0 20080730
lagg0: link state changed to DOWN
wlan0: Ethernet address: 00:24:e8:a7:e1:07
lagg0: link state changed to DOWN
wlan0: Ethernet address: 00:24:e8:a7:e1:07
wlan0: Ethernet address: 00:24:e8:a7:e1:07
lagg0: link state changed to DOWN
lagg0: link state changed to DOWN
wlan0: Ethernet address: 00:24:e8:a7:e1:07
-----------------------------------

-----------------------------------
 /usr/local/bin/pc-wificonfig wlan0 output
-----------------------------------
sendmsg on em0: Device busy
sendmsg on em0: Device busy
Starting wpa_supplicant.
ifconfig: SIOCSLAGGPORT: Device busy
lagg0: no link .............. giving up
Starting Network: lo0 em0 fwe0 fwip0 urtw0 lagg0.
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> metric 0 mtu 16384
        options=3<RXCSUM,TXCSUM>
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0xc
        inet 127.0.0.1 netmask 0xff000000
        nd6 options=21<PERFORMNUD,AUTO_LINKLOCAL>
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC>
        ether 00:24:e8:a7:e1:07
        inet6 fe80::364f:c000:5d6:5a01%em0 prefixlen 64 scopeid 0x1
        nd6 options=23<PERFORMNUD,ACCEPT_RTADV,AUTO_LINKLOCAL>
        media: Ethernet autoselect
        status: no carrier
fwe0: flags=8902<BROADCAST,PROMISC,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=8<VLAN_MTU>
        ether 36:4f:c0:d6:5a:01
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        ch 1 dma -1
fwip0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> metric 0 mtu 1500
        lladdr 34.4f.c0.0.5.d6.5a.1.a.2.ff.fe.0.0.0.0
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
urtw0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 2290
        ether 00:24:e8:a7:e1:07
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: IEEE 802.11 Wireless Ethernet autoselect mode 11g
        status: associated
lagg0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> metric 0 mtu 1500
        options=219b<RXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING,VLAN_HWCSUM,TSO4,WOL_MAGIC>
        ether 00:24:e8:a7:e1:07
        nd6 options=29<PERFORMNUD,IFDISABLED,AUTO_LINKLOCAL>
        media: Ethernet autoselect
        status: no carrier
        laggproto failover
        laggport: em0 flags=1<MASTER>


Request you to help me in this regard.

Thanks.
Ashwin


More information about the Support mailing list