[PC-BSD Support] Cannot Load CDROM

Mike Barnard mike.barnardq at gmail.com
Tue Sep 7 08:38:42 PDT 2010


Hi Quyen,

Unfortunately, there were no error being dumped to /var/log/messages. I
tailed this file while trying to mount CD's but could not. I rebooted
countless times but same thing.

uname -a:

FreeBSD trinity 8.1-RC1 FreeBSD 8.1-RC1 #2: Mon Jun 14 18:21:27 UTC 2010
root at build8x64.pcbsd.org:/usr/obj/storage/builds/pcbsd-build81-x64/fbsd-source/8.1/sys/PCBSD
amd64

Attached is my dmesg file. I got this at 1830HRS, I had plugged in a CD at
1825 and a USB stick about 1800 HRS

Thanks

On Tue, Sep 7, 2010 at 9:47 AM, QT <rdirective at gmail.com> wrote:

> Need some more info about your system.  Perhaps a dmesg, uname -a, and any
> messages from /var/log would be nice.
>
> Quyen
>
> On Mon, Sep 6, 2010 at 7:29 AM, Mike Barnard <mike.barnardq at gmail.com>wrote:
>
>> Hi,
>>
>> I have, for a few days been trying to figure out what could be the problem
>> with my system. Out of no where, I cannot seem to read any CD's; music or
>> data.
>>
>> Any CD that I place in the cdrom drive, I cannot read it. I have tried to
>> force a mount from console but I end up with the mount command remaining in
>> a frozen state forever. I cannot even kill -9 or kill -KILL the mount
>> command.
>>
>> The only change that I had was to install java.
>>
>> I have tried to stop hald from probing the cd drive, but I end up with no
>> symlink found between cd0 and cdrom0.
>>
>> Any ideas on this?
>>
>> PS: I was tempted to upgrade to the latest FreeBSD 8.1-RELEASE, but came
>> across a thread that suggests *not* to go down this road doe to numerous
>> custom configs. Is there an availability of an upgrade PCBSD-way?
>>
>>
>>
>> --
>> Mike
>>
>> Of course, you might discount this possibility, but remember that one in
>> a million chances happen 99% of the time.
>> ------------------------------------------------------------
>>
>> _______________________________________________
>> Support mailing list
>> Support at lists.pcbsd.org
>> http://lists.pcbsd.org/mailman/listinfo/support
>>
>>
>


-- 
Mike

Of course, you might discount this possibility, but remember that one in
a million chances happen 99% of the time.
------------------------------------------------------------
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.pcbsd.org/pipermail/support/attachments/20100907/1c427e12/attachment-0001.html>
-------------- next part --------------
Copyright (c) 1992-2010 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 8.1-RC1 #2: Mon Jun 14 18:21:27 UTC 2010
    root at build8x64.pcbsd.org:/usr/obj/storage/builds/pcbsd-build81-x64/fbsd-source/8.1/sys/PCBSD amd64
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: Intel(R) Core(TM)2 Duo CPU     P8700  @ 2.53GHz (2527.02-MHz K8-class CPU)
  Origin = "GenuineIntel"  Id = 0x1067a  Family = 6  Model = 17  Stepping = 10
  Features=0xbfebfbff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CLFLUSH,DTS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE>
  Features2=0x408e3fd<SSE3,DTES64,MON,DS_CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE>
  AMD Features=0x20100800<SYSCALL,NX,LM>
  AMD Features2=0x1<LAHF>
  TSC: P-state invariant
real memory  = 4294967296 (4096 MB)
avail memory = 4060479488 (3872 MB)
ACPI APIC Table: <DELL   M09    >
FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
FreeBSD/SMP: 1 package(s) x 2 core(s)
 cpu0 (BSP): APIC ID:  0
 cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <Version 2.0> irqs 0-23 on motherboard
Cuse4BSD v0.1.12 @ /dev/cuse                                                                                                                                 
kbd1 at kbdmux0
cryptosoft0: <software crypto> on motherboard
acpi0: <DELL M09    > on motherboard
acpi0: [ITHREAD]
acpi_hpet0: <High Precision Event Timer> iomem 0xfed00000-0xfed003ff on acpi0
Timecounter "HPET" frequency 14318180 Hz quality 900
acpi0: reservation of 0, 9f000 (3) failed
acpi0: reservation of 100000, dcf4d400 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
cpu0: <ACPI CPU> on acpi0
cpu1: <ACPI CPU> on acpi0
acpi_ec0: <Embedded Controller: GPE 0x11> port 0x930,0x934 on acpi0
pcib0: <ACPI Host-PCI bridge> port 0xcf8-0xcff on acpi0
pci0: <ACPI PCI bus> on pcib0
vgapci0: <VGA-compatible display> port 0xef98-0xef9f mem 0xf6c00000-0xf6ffffff,0xe0000000-0xefffffff irq 16 at device 2.0 on pci0
agp0: <Intel GM45 SVGA controller> on vgapci0
agp0: detected 32764k stolen memory
agp0: aperture size is 256M
vgapci1: <VGA-compatible display> mem 0xf6b00000-0xf6bfffff at device 2.1 on pci0
em0: <Intel(R) PRO/1000 Network Connection 7.0.5> port 0xefe0-0xefff mem 0xf6ae0000-0xf6afffff,0xf6adb000-0xf6adbfff irq 22 at device 25.0 on pci0
em0: Using MSI interrupt
em0: [FILTER]
em0: Ethernet address: 00:26:b9:b3:97:7a
uhci0: <Intel 82801I (ICH9) USB controller> port 0x6f60-0x6f7f irq 20 at device 26.0 on pci0
uhci0: [ITHREAD]
uhci0: LegSup = 0x2f00
usbus0: <Intel 82801I (ICH9) USB controller> on uhci0
uhci1: <Intel 82801I (ICH9) USB controller> port 0x6f80-0x6f9f irq 21 at device 26.1 on pci0
uhci1: [ITHREAD]
uhci1: LegSup = 0x2f00
usbus1: <Intel 82801I (ICH9) USB controller> on uhci1
uhci2: <Intel 82801I (ICH9) USB controller> port 0x6fa0-0x6fbf irq 22 at device 26.2 on pci0
uhci2: [ITHREAD]
uhci2: LegSup = 0x2f00
usbus2: <Intel 82801I (ICH9) USB controller> on uhci2
ehci0: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfed1c400-0xfed1c7ff irq 22 at device 26.7 on pci0
ehci0: [ITHREAD]
usbus3: EHCI version 1.0
usbus3: <Intel 82801I (ICH9) USB 2.0 controller> on ehci0
pci0: <multimedia, HDA> at device 27.0 (no driver attached)
pcib1: <ACPI PCI-PCI bridge> at device 28.0 on pci0
pci11: <ACPI PCI bus> on pcib1
pcib2: <ACPI PCI-PCI bridge> at device 28.1 on pci0
pci12: <ACPI PCI bus> on pcib2
iwn0: <Intel(R) PRO/Wireless 5100> mem 0xf69fe000-0xf69fffff irq 17 at device 0.0 on pci12
iwn0: MIMO 1T2R, MoW, address 00:24:d6:6f:7a:cc
iwn0: [ITHREAD]
iwn0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
iwn0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps
iwn0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps
pcib3: <ACPI PCI-PCI bridge> at device 28.2 on pci0
pci13: <ACPI PCI bus> on pcib3
uhci3: <Intel 82801I (ICH9) USB controller> port 0x6f00-0x6f1f irq 20 at device 29.0 on pci0
uhci3: [ITHREAD]
uhci3: LegSup = 0x2f00
usbus4: <Intel 82801I (ICH9) USB controller> on uhci3
uhci4: <Intel 82801I (ICH9) USB controller> port 0x6f20-0x6f3f irq 21 at device 29.1 on pci0
uhci4: [ITHREAD]
uhci4: LegSup = 0x2f00
usbus5: <Intel 82801I (ICH9) USB controller> on uhci4
uhci5: <Intel 82801I (ICH9) USB controller> port 0x6f40-0x6f5f irq 22 at device 29.2 on pci0
uhci5: [ITHREAD]
uhci5: LegSup = 0x2f00
usbus6: <Intel 82801I (ICH9) USB controller> on uhci5
ehci1: <Intel 82801I (ICH9) USB 2.0 controller> mem 0xfed1c000-0xfed1c3ff irq 20 at device 29.7 on pci0
ehci1: [ITHREAD]
usbus7: EHCI version 1.0
usbus7: <Intel 82801I (ICH9) USB 2.0 controller> on ehci1
pcib4: <ACPI PCI-PCI bridge> at device 30.0 on pci0
pci3: <ACPI PCI bus> on pcib4
cbb0: <RF5C476 PCI-CardBus Bridge> irq 19 at device 1.0 on pci3
cardbus0: <CardBus bus> on cbb0
pccard0: <16-bit PCCard bus> on cbb0
cbb0: [FILTER]
fwohci0: <1394 Open Host Controller Interface> mem 0xf68ff800-0xf68fffff irq 17 at device 1.1 on pci3
fwohci0: [ITHREAD]
fwohci0: OHCI version 1.10 (ROM=0)
fwohci0: No. of Isochronous channels is 4.
fwohci0: EUI64 42:4f:c0:00:21:5d:d0:90
fwohci0: Phy 1394a available S400, 1 ports.
fwohci0: Link S400, max_rec 2048 bytes.
firewire0: <IEEE1394(FireWire) bus> on fwohci0
fwe0: <Ethernet over FireWire> on firewire0
if_fwe0: Fake Ethernet address: 42:4f:c0:5d:d0:90
fwe0: Ethernet address: 42:4f:c0:5d:d0:90
fwip0: <IP over FireWire> on firewire0
fwip0: Firewire address: 42:4f:c0:00:21:5d:d0:90 @ 0xfffe00000000, S400, maxrec 2048
dcons_crom0: <dcons configuration ROM> on firewire0
dcons_crom0: bus_addr 0x2678000
fwohci0: Initiate bus reset
fwohci0: fwohci_intr_core: BUS reset
fwohci0: fwohci_intr_core: node_id=0x00000000, SelfID Count=1, CYCLEMASTER mode
sdhci0: <RICOH R5C822 SD> mem 0xf68ff600-0xf68ff6ff irq 18 at device 1.2 on pci3
sdhci0: 1 slot(s) allocated
sdhci0: [ITHREAD]
pci3: <base peripheral> at device 1.3 (no driver attached)
isab0: <PCI-ISA bridge> at device 31.0 on pci0
isa0: <ISA bus> on isab0
ahci0: <Intel ICH8M AHCI SATA controller> port 0x6e70-0x6e77,0x6e78-0x6e7b,0x6e80-0x6e87,0x6e88-0x6e8b,0x6ea0-0x6ebf mem 0xfed1c800-0xfed1cfff irq 19 at device 31.2 on pci0
ahci0: [ITHREAD]
ahci0: AHCI v1.20 with 4 3Gbps ports, Port Multiplier supported
ahcich0: <AHCI channel> at channel 0 on ahci0
ahcich0: [ITHREAD]
ahcich1: <AHCI channel> at channel 1 on ahci0
ahcich1: [ITHREAD]
ahcich2: <AHCI channel> at channel 4 on ahci0
ahcich2: [ITHREAD]
ahcich3: <AHCI channel> at channel 5 on ahci0
ahcich3: [ITHREAD]
pci0: <serial bus, SMBus> at device 31.3 (no driver attached)
acpi_lid0: <Control Method Lid Switch> on acpi0
acpi_button0: <Power Button> on acpi0
acpi_button1: <Sleep Button> on acpi0
acpi_acad0: <AC Adapter> on acpi0
battery0: <ACPI Control Method Battery> on acpi0
battery1: <ACPI Control Method Battery> on acpi0
acpi_tz0: <Thermal Zone> on acpi0
atkbdc0: <Keyboard controller (i8042)> port 0x60,0x64,0x62,0x66 irq 1 on acpi0
atkbd0: <AT Keyboard> irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
psm0: <PS/2 Mouse> flags 0x1000 irq 12 on atkbdc0
psm0: [GIANT-LOCKED]
psm0: [ITHREAD]
psm0: model GlidePoint, device ID 0
atrtc0: <AT realtime clock> port 0x70-0x71,0x72-0x77 irq 8 on acpi0
uart1: <16550 or compatible> port 0x2f8-0x2ff irq 3 on acpi0
uart1: [FILTER]
orm0: <ISA Option ROMs> at iomem 0xc0000-0xcf7ff,0xcf800-0xd47ff,0xd4800-0xd7fff on isa0
sc0: <System console> at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
vga0: <Generic ISA VGA> at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
ppc0: cannot reserve I/O port range
est0: <Enhanced SpeedStep Frequency Control> on cpu0
p4tcc0: <CPU Frequency Thermal Control> on cpu0
est1: <Enhanced SpeedStep Frequency Control> on cpu1
p4tcc1: <CPU Frequency Thermal Control> on cpu1
firewire0: 1 nodes, maxhop <= 0 cable IRM irm(0)  (me) 
firewire0: bus manager 0 
uhci_interrupt: resume detect
ZFS NOTICE: Prefetch is disabled by default if less than 4GB of RAM is present;
            to enable, add "vfs.zfs.prefetch_disable=0" to /boot/loader.conf.
ZFS filesystem version 3
ZFS storage pool version 14
Timecounters tick every 1.000 msec
vboxdrv: fAsync=0 offMin=0x100 offMax=0x487
usbus0: 12Mbps Full Speed USB v1.0
usbus1: 12Mbps Full Speed USB v1.0
usbus2: 12Mbps Full Speed USB v1.0
usbus3: 480Mbps High Speed USB v2.0
usbus4: 12Mbps Full Speed USB v1.0
usbus5: 12Mbps Full Speed USB v1.0
usbus6: 12Mbps Full Speed USB v1.0
usbus7: 480Mbps High Speed USB v2.0
ugen0.1: <Intel> at usbus0
uhub0: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus0
ugen1.1: <Intel> at usbus1
uhub1: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus1
ugen2.1: <Intel> at usbus2
uhub2: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus2
ugen3.1: <Intel> at usbus3
uhub3: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus3
ugen4.1: <Intel> at usbus4
uhub4: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus4
ugen5.1: <Intel> at usbus5
uhub5: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus5
ugen6.1: <Intel> at usbus6
uhub6: <Intel UHCI root HUB, class 9/0, rev 1.00/1.00, addr 1> on usbus6
ugen7.1: <Intel> at usbus7
uhub7: <Intel EHCI root HUB, class 9/0, rev 2.00/1.00, addr 1> on usbus7
ada0 at ahcich0 bus 0 scbus0 target 0 lun 0
ada0: <ST9160314AS D003DEM1> ATA-8 SATA 2.x device
ada0: 300.000MB/s transfers (SATA 2.x, UDMA6, PIO 8192bytes)
ada0: Command Queueing enabled
ada0: 152627MB (312581808 512 byte sectors: 16H 63S/T 16383C)
SMP: AP CPU #1 Launched!
cd0 at ahcich1 bus 0 scbus1 target 0 lun 0
cd0: <Optiarc DVD+-RW AD-7930H 100A> Removable CD-ROM SCSI-0 device 
cd0: 150.000MB/s transfers (SATA 1.x, UDMA5, ATAPI 12bytes, PIO 8192bytes)
cd0: Attempt to query device size failed: NOT READY, Medium not present - tray closed
uhub1: 2 ports with 2 removable, self powered
uhub2: 2 ports with 2 removable, self powered
uhub0: 2 ports with 2 removable, self powered
uhub5: 2 ports with 2 removable, self powered
uhub4: 2 ports with 2 removable, self powered
uhub6: 2 ports with 2 removable, self powered
Enter passphrase for ada0p5: uhub3: 6 ports with 6 removable, self powered
uhub7: 6 ports with 6 removable, self powered
ugen3.2: <vendor 0x413c> at usbus3
uhub8: <vendor 0x413c product 0x2513, class 9/0, rev 2.00/a0.05, addr 2> on usbus3
uhub8: 3 ports with 3 removable, self powered
ugen3.3: <vendor 0x413c> at usbus3
uhub9: <vendor 0x413c product 0x2513, class 9/0, rev 2.00/a0.05, addr 3> on usbus3
uhub9: 3 ports with 3 removable, self powered
ugen3.4: <Dell> at usbus3
ukbd0: <Dell Dell USB Keyboard, class 0/0, rev 1.10/3.01, addr 4> on usbus3
kbd2 at ukbd0
ugen3.5: <vendor 0x0461> at usbus3
ums0: <vendor 0x0461 USB Optical Mouse, class 0/0, rev 2.00/2.00, addr 5> on usbus3
ums0: 3 buttons and [XYZ] coordinates ID=0
ugen3.6: <Plantronics> at usbus3
uaudio0: <Plantronics DA40 Adapter, class 0/0, rev 1.10/1.13, addr 6> on usbus3
uaudio0: Play: 48000 Hz, 1 ch, 16-bit S-LE PCM format
uaudio0: Record: 48000 Hz, 1 ch, 16-bit S-LE PCM format
uaudio0: No midi sequencer
pcm0: <USB audio> on uaudio0
uhid0: <Plantronics DA40 Adapter, class 0/0, rev 1.10/1.13, addr 6> on usbus3
ugen2.2: <Broadcom Corp> at usbus2

GEOM_ELI: Device ada0p5.eli created.
GEOM_ELI: Encryption: AES-CBC 128
GEOM_ELI:     Crypto: software
Enter passphrase for ada0p6: 
GEOM_ELI: Device ada0p6.eli created.
GEOM_ELI: Encryption: AES-CBC 128
GEOM_ELI:     Crypto: software
GEOM_JOURNAL: Journal 1704285619: ada0p5.eli contains data.
GEOM_JOURNAL: Journal 1704285619: ada0p5.eli contains journal.
GEOM_JOURNAL: Journal ada0p5.eli clean.
GEOM_JOURNAL: Journal 2827531670: ada0p6.eli contains data.
GEOM_JOURNAL: Journal 2827531670: ada0p6.eli contains journal.
GEOM_JOURNAL: Journal ada0p6.eli clean.
Trying to mount root from ufs:/dev/label/rootfs0
WARNING: TMPFS is considered to be a highly experimental feature in FreeBSD.
wlan0: Ethernet address: 00:24:d6:6f:7a:cc
hdac0: <Intel 82801I High Definition Audio Controller> mem 0xf6adc000-0xf6adffff irq 21 at device 27.0 on pci0
hdac0: HDA Driver Revision: 20100226_0142
hdac0: [ITHREAD]
hdac0: HDA Codec #0: IDT 92HD71B7
hdac0: HDA Codec #1: Conexant (Unknown)
hdac0: HDA Codec #2: Intel G45 HDMI
pcm1: <HDA IDT 92HD71B7 PCM #0 Analog> at cad 0 nid 1 on hdac0
pcm2: <HDA IDT 92HD71B7 PCM #1 Analog> at cad 0 nid 1 on hdac0
pcm3: <HDA Intel G45 HDMI PCM #0 HDMI> at cad 2 nid 1 on hdac0
WARNING: attempt to domain_add(bluetooth) after domainfinalize()
drm0: <Mobile Intel\M-B\M-. GM45 Express Chipset> on vgapci0
info: [drm] MSI enabled 1 message(s)
vgapci0: child drm0 requested pci_enable_busmaster
info: [drm] AGP at 0xe0000000 256MB
info: [drm] Initialized i915 1.6.0 20080730
drm0: [ITHREAD]
ugen7.2: <JetFlash> at usbus7
umass0: <JetFlash Mass Storage Device, class 0/0, rev 2.00/1.42, addr 2> on usbus7
umass0:  SCSI over Bulk-Only; quirks = 0x0100
umass0:4:0:-1: Attached to scbus4
(probe0:umass-sim0:0:0:0): TEST UNIT READY. CDB: 0 0 0 0 0 0 
(probe0:umass-sim0:0:0:0): CAM status: SCSI Status Error
(probe0:umass-sim0:0:0:0): SCSI status: Check Condition
(probe0:umass-sim0:0:0:0): SCSI sense: UNIT ATTENTION asc:28,0 (Not ready to ready change, medium may have changed)
da0 at umass-sim0 bus 0 scbus4 target 0 lun 0
da0: <JetFlash TS1GJFV30 8.07> Removable Direct Access SCSI-2 device 
da0: 40.000MB/s transfers
da0: 977MB (2002942 512 byte sectors: 64H 32S/T 977C)
GEOM: da0: partition 1 does not end on a track boundary.


More information about the Support mailing list