[PC-BSD Commits] r4814 - pcbsd/trunk/system-overlay/usr/PCBSD/conf

svn at pcbsd.org svn at pcbsd.org
Thu Oct 29 11:46:13 PST 2009


Author: kris
Date: 2009-10-29 12:46:13 -0700 (Thu, 29 Oct 2009)
New Revision: 4814

Added:
   pcbsd/trunk/system-overlay/usr/PCBSD/conf/PCBSD
Modified:
   pcbsd/trunk/system-overlay/usr/PCBSD/conf/PCBSD.i386
Log:

Added new PCBSD kernel conf, which just is an addon to GENERIC



Modified: pcbsd/trunk/system-overlay/usr/PCBSD/conf/PCBSD.i386
===================================================================
--- pcbsd/trunk/system-overlay/usr/PCBSD/conf/PCBSD.i386	2009-10-29 15:35:55 UTC (rev 4813)
+++ pcbsd/trunk/system-overlay/usr/PCBSD/conf/PCBSD.i386	2009-10-29 19:46:13 UTC (rev 4814)
@@ -1,374 +1,20 @@
 #
-# GENERIC -- Generic kernel configuration file for FreeBSD/i386
+# PCBSD -- Generic kernel configuration file for PCBSD 8
 #
-# For more information on this file, please read the config(5) manual page,
-# and/or the handbook section on Kernel Configuration Files:
-#
-#    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
-#
-# The handbook is also available locally in /usr/share/doc/handbook
-# if you've installed the doc distribution, otherwise always see the
-# FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
-# latest information.
-#
-# An exhaustive list of options and more detailed explanations of the
-# device lines is also present in the ../../conf/NOTES and NOTES files.
-# If you are in doubt as to the purpose or necessity of a line, check first
-# in NOTES.
-#
-# PC-BSD 8.0 kernel configuration for i386 
 
-machine		i386
-cpu		I486_CPU
-cpu		I586_CPU
-cpu		I686_CPU
+include GENERIC
+
 ident		PCBSD
 
-# To statically compile in device wiring instead of /boot/device.hints
-#hints		"GENERIC.hints"		# Default places to look for devices.
-
-# Use the following to compile in values accessible to the kernel
-# through getenv() (or kenv(1) in userland). The format of the file
-# is 'variable=value', see kenv(1)
-#
-# env		"GENERIC.env"
-
-options 	SCHED_ULE		# ULE scheduler
-options 	PREEMPTION		# Enable kernel thread preemption
-options 	INET			# InterNETworking
-options 	INET6			# IPv6 communications protocols
-options 	SCTP			# Stream Control Transmission Protocol
-options 	FFS			# Berkeley Fast Filesystem
-options 	SOFTUPDATES		# Enable FFS soft updates support
-options 	UFS_ACL			# Support for access control lists
-options 	UFS_DIRHASH		# Improve performance on big directories
-options 	UFS_GJOURNAL		# Enable gjournal-based UFS journaling
-options 	GEOM_JOURNAL		# Journaling via GEOM
-options 	MD_ROOT			# MD is a potential root device
-options 	NFSCLIENT		# Network Filesystem Client
-options 	NFSSERVER		# Network Filesystem Server
-options 	NFSLOCKD		# Network Lock Manager
-options 	NFS_ROOT		# NFS usable as /, requires NFSCLIENT
-options 	MSDOSFS			# MSDOS Filesystem
-options 	CD9660			# ISO 9660 Filesystem
-options 	PROCFS			# Process filesystem (requires PSEUDOFS)
-options 	PSEUDOFS		# Pseudo-filesystem framework
-options 	GEOM_PART_GPT		# GUID Partition Tables.
-options 	GEOM_LABEL		# Provides labelization
-options 	COMPAT_43TTY		# BSD 4.3 TTY compat (sgtty)
-options		GEOM_UZIP		# Read-only compressed disks
-options 	COMPAT_FREEBSD4		# Compatible with FreeBSD4
-options 	COMPAT_FREEBSD5		# Compatible with FreeBSD5
-options 	COMPAT_FREEBSD6		# Compatible with FreeBSD6
-options 	COMPAT_FREEBSD7		# Compatible with FreeBSD7
-options 	SCSI_DELAY=5000		# Delay (in ms) before probing SCSI
-options 	KTRACE			# ktrace(1) support
-options 	STACK			# stack(9) support
-options 	SYSVSHM			# SYSV-style shared memory
-options 	SYSVMSG			# SYSV-style message queues
-options 	SYSVSEM			# SYSV-style semaphores
-options 	P1003_1B_SEMAPHORES	# POSIX-style semaphores
-options 	_KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
-options 	PRINTF_BUFR_SIZE=128	# Prevent printf output being interspersed.
-options 	KBD_INSTALL_CDEV	# install a CDEV entry in /dev
-options 	HWPMC_HOOKS		# Necessary kernel hooks for hwpmc(4)
-options 	AUDIT			# Security event auditing
-options 	MAC			# TrustedBSD MAC Framework
-options		FLOWTABLE		# per-cpu routing cache
-
-options		LIBICONV
-options		LIBMCHAIN
-options		CD9660_ICONV
-options		MSDOSFS_ICONV
-options		NTFS
-options		NTFS_ICONV
-options		UDF
-options		UDF_ICONV
-
-# To make an SMP kernel, the next two lines are needed
-options 	SMP			# Symmetric MultiProcessor Kernel
-device		apic			# I/O APIC
-
-# CPU frequency control
-device		cpufreq
-
-
-# Bus support.
-device		acpi
-device		eisa
-device		pci
-
-# Floppy drives
-device		fdc
-
-# ATA and ATAPI devices
-device		ata
-device		atadisk		# ATA disk drives
-device		ataraid		# ATA RAID drives
-device		atapicd		# ATAPI CDROM drives
-device		atapifd		# ATAPI floppy drives
-device		atapist		# ATAPI tape drives
-#options 	ATA_STATIC_ID	# Static device numbering
-device		atapicam	# Atapi CAM Support
-
-# SCSI Controllers
-device		ahb		# EISA AHA1742 family
-device		ahc		# AHA2940 and onboard AIC7xxx devices
-options 	AHC_REG_PRETTY_PRINT	# Print register bitfields in debug
-					# output.  Adds ~128k to driver.
-device		ahd		# AHA39320/29320 and onboard AIC79xx devices
-options 	AHD_REG_PRETTY_PRINT	# Print register bitfields in debug
-					# output.  Adds ~215k to driver.
-device		amd		# AMD 53C974 (Tekram DC-390(T))
-device		hptiop		# Highpoint RocketRaid 3xxx series
-device		isp		# Qlogic family
-#device		ispfw		# Firmware for QLogic HBAs- normally a module
-device		mpt		# LSI-Logic MPT-Fusion
-#device		ncr		# NCR/Symbios Logic
-device		sym		# NCR/Symbios Logic (newer chipsets + those of `ncr')
-device		trm		# Tekram DC395U/UW/F DC315U adapters
-
-device		adv		# Advansys SCSI adapters
-device		adw		# Advansys wide SCSI adapters
-device		aha		# Adaptec 154x SCSI adapters
-device		aic		# Adaptec 15[012]x SCSI adapters, AIC-6[23]60.
-device		bt		# Buslogic/Mylex MultiMaster SCSI adapters
-
-device		ncv		# NCR 53C500
-device		nsp		# Workbit Ninja SCSI-3
-device		stg		# TMC 18C30/18C50
-
-# SCSI peripherals
-device		scbus		# SCSI bus (required for SCSI)
-device		ch		# SCSI media changers
-device		da		# Direct Access (disks)
-device		sa		# Sequential Access (tape etc)
-device		cd		# CD
-device		pass		# Passthrough device (direct SCSI access)
-device		ses		# SCSI Environmental Services (and SAF-TE)
-
-# RAID controllers interfaced to the SCSI subsystem
-device		amr		# AMI MegaRAID
-device		arcmsr		# Areca SATA II RAID
-device		asr		# DPT SmartRAID V, VI and Adaptec SCSI RAID
-device		ciss		# Compaq Smart RAID 5*
-device		dpt		# DPT Smartcache III, IV - See NOTES for options
-device		hptmv		# Highpoint RocketRAID 182x
-device		hptrr		# Highpoint RocketRAID 17xx, 22xx, 23xx, 25xx
-device		iir		# Intel Integrated RAID
-device		ips		# IBM (Adaptec) ServeRAID
-device		mly		# Mylex AcceleRAID/eXtremeRAID
-device		twa		# 3ware 9000 series PATA/SATA RAID
-
-# RAID controllers
-device		aac		# Adaptec FSA RAID
-device		aacp		# SCSI passthrough for aac (requires CAM)
-device		ida		# Compaq Smart RAID
-device		mfi		# LSI MegaRAID SAS
-device		mlx		# Mylex DAC960 family
-device		pst		# Promise Supertrak SX6000
-device		twe		# 3ware ATA RAID
-
-# atkbdc0 controls both the keyboard and the PS/2 mouse
-device		atkbdc		# AT keyboard controller
-device		atkbd		# AT keyboard
-device		psm		# PS/2 mouse
-
-device		kbdmux		# keyboard multiplexer
-
-device		vga		# VGA video card driver
-
-device		splash		# Splash screen and screen saver support
-
-# syscons is the default console driver, resembling an SCO console
-device		sc
-
-device		agp		# support several AGP chipsets
-
-# Power management support (see NOTES for more options)
-#device		apm
-# Add suspend/resume support for the i8254.
-device		pmtimer
-
-# PCCARD (PCMCIA) support
-# PCMCIA and cardbus bridge support
-device		cbb		# cardbus (yenta) bridge
-device		pccard		# PC Card (16-bit) bus
-device		cardbus		# CardBus (32-bit) bus
-
-# Serial (COM) ports
-device		uart		# Generic UART driver
-
-# Parallel port
-device		ppc
-device		ppbus		# Parallel port bus (required)
-device		lpt		# Printer
-device		plip		# TCP/IP over parallel
-device		ppi		# Parallel port interface device
-#device		vpo		# Requires scbus and da
-
-# If you've got a "dumb" serial or parallel PCI card that is
-# supported by the puc(4) glue driver, uncomment the following
-# line to enable it (connects to sio, uart and/or ppc drivers):
-#device		puc
-
-# PCI Ethernet NICs.
-device		de		# DEC/Intel DC21x4x (``Tulip'')
-device		em		# Intel PRO/1000 Gigabit Ethernet Family
-device		igb		# Intel PRO/1000 PCIE Server Gigabit Family
-device		ixgb		# Intel PRO/10GbE Ethernet Card
-device		le		# AMD Am7900 LANCE and Am79C9xx PCnet
-device		ti		# Alteon Networks Tigon I/II gigabit Ethernet
-device		txp		# 3Com 3cR990 (``Typhoon'')
-device		vx		# 3Com 3c590, 3c595 (``Vortex'')
-
-# PCI Ethernet NICs that use the common MII bus controller code.
-# NOTE: Be sure to keep the 'device miibus' line in order to use these NICs!
-device		miibus		# MII bus support
-device		ae		# Attansic/Atheros L2 FastEthernet
-device		age		# Attansic/Atheros L1 Gigabit Ethernet
-device		alc		# Atheros AR8131/AR8132 Ethernet
-device		ale		# Atheros AR8121/AR8113/AR8114 Ethernet
-device		bce		# Broadcom BCM5706/BCM5708 Gigabit Ethernet
-device		bfe		# Broadcom BCM440x 10/100 Ethernet
-device		bge		# Broadcom BCM570xx Gigabit Ethernet
-device		dc		# DEC/Intel 21143 and various workalikes
-device		et		# Agere ET1310 10/100/Gigabit Ethernet
-device		fxp		# Intel EtherExpress PRO/100B (82557, 82558)
-device		jme		# JMicron JMC250 Gigabit/JMC260 Fast Ethernet
-device		lge		# Level 1 LXT1001 gigabit Ethernet
-device		msk		# Marvell/SysKonnect Yukon II Gigabit Ethernet
-device		nfe		# nVidia nForce MCP on-board Ethernet
-device		nge		# NatSemi DP83820 gigabit Ethernet
-#device		nve		# nVidia nForce MCP on-board Ethernet Networking
-device		pcn		# AMD Am79C97x PCI 10/100 (precedence over 'le')
-device		re		# RealTek 8139C+/8169/8169S/8110S
-device		rl		# RealTek 8129/8139
-device		sf		# Adaptec AIC-6915 (``Starfire'')
-device		sis		# Silicon Integrated Systems SiS 900/SiS 7016
-device		sk		# SysKonnect SK-984x & SK-982x gigabit Ethernet
-device		ste		# Sundance ST201 (D-Link DFE-550TX)
-device		stge		# Sundance/Tamarack TC9021 gigabit Ethernet
-device		tl		# Texas Instruments ThunderLAN
-device		tx		# SMC EtherPower II (83c170 ``EPIC'')
-device		vge		# VIA VT612x gigabit Ethernet
-device		vr		# VIA Rhine, Rhine II
-device		wb		# Winbond W89C840F
-device		xl		# 3Com 3c90x (``Boomerang'', ``Cyclone'')
-
-# ISA Ethernet NICs.  pccard NICs included.
-device		cs		# Crystal Semiconductor CS89x0 NIC
-# 'device ed' requires 'device miibus'
-device		ed		# NE[12]000, SMC Ultra, 3c503, DS8390 cards
-device		ex		# Intel EtherExpress Pro/10 and Pro/10+
-device		ep		# Etherlink III based cards
-device		fe		# Fujitsu MB8696x based cards
-device		ie		# EtherExpress 8/16, 3C507, StarLAN 10 etc.
-device		sn		# SMC's 9000 series of Ethernet chips
-device		xe		# Xircom pccard Ethernet
-
-# Wireless NIC cards
-device		wlan		# 802.11 support
-options 	IEEE80211_DEBUG	# enable debug msgs
-options 	IEEE80211_AMPDU_AGE # age frames in AMPDU reorder q's
-options 	IEEE80211_SUPPORT_MESH	# enable 802.11s D3.0 support
-device		wlan_wep	# 802.11 WEP support
-device		wlan_ccmp	# 802.11 CCMP support
-device		wlan_tkip	# 802.11 TKIP support
-device		wlan_amrr	# AMRR transmit rate control algorithm
-device		an		# Aironet 4500/4800 802.11 wireless NICs.
-device		ath		# Atheros pci/cardbus NIC's
-device		ath_hal		# pci/cardbus chip support
-options 	AH_SUPPORT_AR5416	# enable AR5416 tx/rx descriptors
-device		ath_rate_sample	# SampleRate tx rate control for ath
-device		ral		# Ralink Technology RT2500 wireless NICs.
-device		wi		# WaveLAN/Intersil/Symbol 802.11 wireless NICs.
-#device		wl		# Older non 802.11 Wavelan wireless NIC.
-device		iwi		# Intel Wireless Adapters
-device		ipw		# Intel Wireless Adapters
-device		wpi		# Intel WPI adapters
-
-
-# Pseudo devices.
-device		loop		# Network loopback
-device		random		# Entropy device
-device		ether		# Ethernet support
-device		tun		# Packet tunnel.
-device		pty		# BSD-style compatibility pseudo ttys
-device		md		# Memory "disks"
-device		gif		# IPv6 and IPv4 tunneling
-device		faith		# IPv6-to-IPv4 relaying (translation)
-device		firmware	# firmware assist module
-
-# The `bpf' device enables the Berkeley Packet Filter.
-# Be aware of the administrative consequences of enabling this!
-# Note that 'bpf' is required for DHCP.
-device		bpf		# Berkeley packet filter
-
-# USB support
-device		uhci		# UHCI PCI->USB interface
-device		ohci		# OHCI PCI->USB interface
-device		ehci		# EHCI PCI->USB interface (USB 2.0)
-device		usb		# USB Bus (required)
-#device		udbp		# USB Double Bulk Pipe devices
-device		uhid		# "Human Interface Devices"
-device		ukbd		# Keyboard
-device		ulpt		# Printer
-device		umass		# Disks/Mass storage - Requires scbus and da
-device		ums		# Mouse
-device		rum		# Ralink Technology RT2501USB wireless NICs
-device		ural		# Ralink Technology RT2500USB wireless NICs
-device		uath		# Atheros AR5523 wireless NICs
-device		zyd		# ZyDAS zb1211/zb1211b wireless NICs
-device		urio		# Diamond Rio 500 MP3 player
-# USB Serial devices
-device		u3g		# USB-based 3G modems (Option, Huawei, Sierra)
-device		uark		# Technologies ARK3116 based serial adapters
-device		ubsa		# Belkin F5U103 and compatible serial adapters
-device		uftdi		# For FTDI usb serial adapters
-device		uipaq		# Some WinCE based devices
-device		uplcom		# Prolific PL-2303 serial adapters
-device		uslcom		# SI Labs CP2101/CP2102 serial adapters
-device		uvisor		# Visor and Palm devices
-device		uvscom		# USB serial support for DDI pocket's PHS
-# USB Ethernet, requires miibus
-device		aue		# ADMtek USB Ethernet
-device		axe		# ASIX Electronics USB Ethernet
-device		cdce		# Generic USB over Ethernet
-device		cue		# CATC USB Ethernet
-device		kue		# Kawasaki LSI USB Ethernet
-device		rue		# RealTek RTL8150 USB Ethernet
-device		udav		# Davicom DM9601E USB
-
-# FireWire support
-device		firewire	# FireWire bus code
-device		sbp		# SCSI over FireWire (Requires scbus and da)
-device		fwe		# Ethernet over FireWire (non-standard!)
-device		fwip		# IP over FireWire (RFC 2734,3146)
-device		dcons		# Dumb console driver
-device		dcons_crom	# Configuration ROM for dcons
-
-# Sound Support modules
-device		sound		# Generic Sound Support
-device		snd_uaudio	# Support for USB Audio
-
 # Added support for pf / altq
-device 		pf
-device 		pflog
-device 		pfsync
-options		ALTQ
-options		ALTQ_CBQ
-options		ALTQ_RED
-options		ALTQ_RIO
-options		ALTQ_HFSC
-options		ALTQ_CDNR
-options		ALTQ_PRIQ
-options		ALTQ_NOPCC
-
-# Support for mmc card-readers
-device mmc
-device mmcsd
-device sdhci
-
-# Support for scd
-device scd
+device          pf
+device          pflog
+device          pfsync
+options         ALTQ
+options         ALTQ_CBQ
+options         ALTQ_RED
+options         ALTQ_RIO
+options         ALTQ_HFSC
+options         ALTQ_CDNR
+options         ALTQ_PRIQ
+options         ALTQ_NOPCC



More information about the Commits mailing list