[PC-BSD Commits] r2184 - pcbsd/trunk/system-overlay/usr/local/kde4/share/config/kdm

svn at pcbsd.org svn at pcbsd.org
Thu Jun 26 16:18:06 PDT 2008


Author: kris
Date: 2008-06-26 16:18:06 -0700 (Thu, 26 Jun 2008)
New Revision: 2184

Modified:
   pcbsd/trunk/system-overlay/usr/local/kde4/share/config/kdm/kdmrc
Log:

Fixed up the kdmrc to new version which also uses the pcbsd7 theme



Modified: pcbsd/trunk/system-overlay/usr/local/kde4/share/config/kdm/kdmrc
===================================================================
--- pcbsd/trunk/system-overlay/usr/local/kde4/share/config/kdm/kdmrc	2008-06-26 23:16:58 UTC (rev 2183)
+++ pcbsd/trunk/system-overlay/usr/local/kde4/share/config/kdm/kdmrc	2008-06-26 23:18:06 UTC (rev 2184)
@@ -1,580 +1,79 @@
-# KDM master configuration file
-#
-# Definition: the greeter is the login dialog, i.e., the part of KDM
-# which the user sees.
-#
-# You can configure every X-display individually.
-# Every display has a display name, which consists of a host name
-# (which is empty for local displays specified in {Static|Reserve}Servers),
-# a colon, and a display number. Additionally, a display belongs to a
-# display class (which can be ignored in most cases; the control center
-# does not support this feature at all).
-# Sections with display-specific settings have the formal syntax
-# "[X-" host [":" number [ "_" class ]] "-" sub-section "]"
-# You can use the "*" wildcard for host, number, and class. You may omit
-# trailing components; they are assumed to be "*" then.
-# The host part may be a domain specification like ".inf.tu-dresden.de".
-# It may also be "+", which means non-empty, i.e. remote displays only.
-# From which section a setting is actually taken is determined by these
-# rules:
-# - an exact match takes precedence over a partial match (for the host part),
-#   which in turn takes precedence over a wildcard ("+" taking precedence
-#   over "*")
-# - precedence decreases from left to right for equally exact matches
-# Example: display name "myhost:0", class "dpy".
-# [X-myhost:0_dpy] precedes
-# [X-myhost:0_*] (same as [X-myhost:0]) precedes
-# [X-myhost:*_dpy] precedes
-# [X-myhost:*_*] (same as [X-myhost]) precedes
-# [X-+:0_dpy] precedes
-# [X-*:0_dpy] precedes
-# [X-*:0_*] (same as [X-*:0]) precedes
-# [X-*:*_*] (same as [X-*])
-# These sections do NOT match this display:
-# [X-hishost], [X-myhost:0_dec], [X-*:1], [X-:*]
-# If a setting is not found in any matching section, the default is used.
-#
-# Every comment applies to the following section or key. Note that all
-# comments will be lost if you change this file with the kcontrol frontend.
-# The defaults refer to KDM's built-in values, not anything set in this file.
-#
-# Special characters need to be backslash-escaped (leading and trailing
-# spaces (\s), tab (\t), linefeed (\n), carriage return (\r) and the
-# backslash itself (\\)).
-# In lists, fields are separated with commas without whitespace in between.
-# Some command strings are subject to simplified sh-style word splitting:
-# single quotes (') and double quotes (") have the usual meaning; the backslash
-# quotes everything (not only special characters). Note that the backslashes
-# need to be doubled because of the two levels of quoting.
-
 [General]
-# This option exists solely for the purpose of a clean automatic upgrade.
-# Do not even think about changing it!
 ConfigVersion=2.4
-# List of permanent displays. Displays with a hostname are foreign. A display
-# class may be specified separated by an underscore.
-# Default is ":0"
+PidFile=/var/run/xdm.pid
+ReserveServers=
 StaticServers=:0
-# List of on-demand displays. See StaticServers for syntax.
-# Default is ""
-ReserveServers=:1,:2,:3
-# Where KDM should store its PID (do not store if empty).
-# Default is ""
-PidFile=/var/run/kdm.pid
-# Whether KDM should lock the PID file to prevent having multiple KDM
-# instances running at once. Do not change unless you are brave.
-# Default is true
-#LockPidFile=false
-# Where to store authorization files.
-# Default is "/var/run/xauth"
-#AuthDir=/tmp
-# Whether KDM should automatically re-read configuration files, if it
-# finds them having changed.
-# Default is true
-#AutoRescan=false
-# Additional environment variables KDM should pass on to all programs it runs.
-# LD_LIBRARY_PATH and XCURSOR_THEME are good candidates;
-# otherwise, it should not be necessary very often.
-# Default is ""
-#ExportList=LD_LIBRARY_PATH,ANOTHER_IMPORTANT_VAR
-# A file KDM should read entropy from.
-# Default is "/dev/mem"
-#RandomFile=
-# A UNIX domain socket KDM should read entropy from.
-# Default is ""
-#PrngdSocket=/tmp/entropy
-# A TCP socket on localhost KDM should read entropy from.
-# Default is 0
-#PrngdPort=4840
-# A character device KDM should read entropy from.
-# Empty means use the system's preferred entropy device.
-# Default is ""
-#RandomDevice=/dev/altrandom
-# Where the command sockets should be created; make it empty to disable
-# them.
-# Default is "/var/run/xdmctl"
-#FifoDir=/tmp
-# The group to which the global command socket should belong;
-# can be either a name or a numerical ID.
-# Default is 0
-#FifoGroup=xdmctl
-# The directory in which KDM should store persistent working data.
-# Default is "/var/lib/kdm"
-#DataDir=
-# The directory in which KDM should store users' .dmrc files. This is only
-# needed if the home directories are not readable before actually logging in
-# (like with AFS).
-# Default is ""
-#DmrcDir=/nfs-shared/var/dmrcs
 
-[Xdmcp]
-# Whether KDM should listen to incoming XDMCP requests.
-# Default is true
-Enable=false
-# The UDP port on which KDM should listen for XDMCP requests. Do not change.
-# Default is 177
-#Port=177
-# File with the private keys of X-terminals. Required for XDM authentication.
-# Default is ""
-#KeyFile=/usr/local/kde4/share/config/kdm/kdmkeys
-# XDMCP access control file in the usual XDM-Xaccess format.
-# Default is "/usr/local/kde4/share/config/kdm/Xaccess"
-Xaccess=/usr/local/kde4/share/config/kdm/Xaccess
-# Number of seconds to wait for display to respond after the user has
-# selected a host from the chooser.
-# Default is 15
-#ChoiceTimeout=10
-# Strip domain name from remote display names if it is equal to the local
-# domain.
-# Default is true
-#RemoveDomainname=false
-# Use the numeric IP address of the incoming connection on multihomed hosts
-# instead of the host name.
-# Default is false
-#SourceAddress=true
-# The program which is invoked to dynamically generate replies to XDMCP
-# DirectQuery or BroadcastQuery requests.
-# If empty, no program is invoked and "Willing to manage" is sent.
-# Default is ""
-Willing=/usr/local/kde4/share/config/kdm/Xwilling
-
 [Shutdown]
-# The command (subject to word splitting) to run to halt the system.
-# Default is "/sbin/shutdown -h now"
-HaltCmd=/sbin/shutdown -p now
-# The command (subject to word splitting) to run to reboot the system.
-# Default is "/sbin/shutdown -r now"
+BootManager=None
+HaltCmd=/sbin/halt
 RebootCmd=/sbin/reboot
-# Whether it is allowed to shut down the system via the global command socket.
-# Default is false
-#AllowFifo=true
-# Whether it is allowed to abort active sessions when shutting down the
-# system via the global command socket.
-# Default is true
-#AllowFifoNow=false
-# The boot manager KDM should use for offering boot options in the
-# shutdown dialog.
-# "None" - no boot manager
-# "Grub" - Grub boot manager
-# "Lilo" - Lilo boot manager (Linux on i386 & x86-64 only)
-# Default is None
-#BootManager=Grub
 
-# Rough estimations about how many seconds KDM will spend at most on
-# - opening a connection to the X-server (OpenTime) if the attempt
-#   - times out: OpenTimeout
-#   - is refused: OpenRepeat * OpenDelay
-# - starting a local X-server (ServerTime):
-#   ServerAttempts * (ServerTimeout + OpenDelay)
-# - starting a display:
-#   - local display: ServerTime + OpenTime
-#   - foreign display: StartAttempts * OpenTime
-#   - XDMCP display: OpenTime (repeated indefinitely by client)
-
-# Core config for all displays
 [X-*-Core]
-# How long to wait before retrying to connect a display.
-# Default is 15
-#OpenDelay=15
-# How long to wait before timing out a display connection attempt.
-# Default is 120
-#OpenTimeout=120
-# How many connection attempts to make during a start attempt. Note that
-# a timeout aborts the entire start attempt.
-# Default is 5
-#OpenRepeat=5
-# Try at most that many times to start a display. If this fails, the display
-# is disabled.
-# Default is 4
-#StartAttempts=4
-# Ping remote display every that many minutes.
-# Default is 5
-#PingInterval=5
-# Wait for a Pong that many minutes.
-# Default is 5
-#PingTimeout=5
-# The name of this X-server's Xauth file.
-# If empty, a random name in the AuthDir directory will be used.
-# Default is ""
-#AuthFile=
-# Specify a file with X-resources for the greeter, chooser and background.
-# The KDE frontend does not use this file, so you do not need it unless you
-# use another background generator than krootimage.
-# Default is ""
-#Resources=
-# The xrdb program to use to read the above specified recources.
-# Subject to word splitting.
-# Default is "/usr/local/bin/xrdb"
-#Xrdb=
-# A program to run before the greeter is shown. Can be used to start an
-# xconsole or an alternative background generator. Subject to word splitting.
-# Default is ""
-Setup=/usr/local/kde4/share/config/kdm/Xsetup
-# A program to run before a user session starts. Subject to word splitting.
-# Default is ""
-Startup=/usr/local/kde4/share/config/kdm/Xstartup
-# A program to run after a user session exits. Subject to word splitting.
-# Default is ""
-Reset=/usr/local/kde4/share/config/kdm/Xreset
-# The program which is run as the user which logs in. It is supposed to
-# interpret the session argument (see SessionsDirs) and start an appropriate
-# session according to it. Subject to word splitting.
-# Default is "/usr/local/bin/xterm -ls -T"
-Session=/usr/local/kde4/share/config/kdm/Xsession
-# The program to run if Session fails.
-# Default is "/usr/local/bin/xterm"
-#FailsafeClient=
-# The PATH for the Session program.
-# Default is "/usr/local/bin:/usr/bin:/bin:/usr/games"
-#UserPath=
-# The PATH for Setup, Startup and Reset, etc.
-# Default is "/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin"
-#SystemPath=
-# The default system shell.
-# Default is "/bin/sh"
-#SystemShell=/bin/bash
-# Where to put the user's X-server authorization file if ~/.Xauthority
-# cannot be created.
-# Default is "/tmp"
-#UserAuthDir=
-# If true, UserAuthDir will be used unconditionally.
-# Default is false
-#ForceUserAuthDir=true
-# Whether to automatically restart sessions after X-server crashes.
-# Note that enabling this makes circumventing screen lockers other than
-# KDE's built-in one possible!
-# Default is false
-AutoReLogin=false
-# Allow root logins?
-# Default is true
-AllowRootLogin=false
-# Allow to log in, when user has set an empty password?
-# Default is true
 AllowNullPasswd=false
-# Who is allowed to shut down the system. This applies both to the
-# greeter and to the command sockets.
-# "None" - no "Shutdown..." menu entry is shown at all
-# "Root" - the root password must be entered to shut down
-# "All" - everybody can shut down the machine
-# Default is All
+AllowRootLogin=false
 AllowShutdown=Root
-# Who is allowed to abort active sessions when shutting down.
-# "None" - no forced shutdown is allowed at all
-# "Root" - the root password must be entered to shut down forcibly
-# "All" - everybody can shut down the machine forcibly
-# Default is All
-#AllowSdForceNow=Root
-# The default choice for the shutdown condition/timing.
-# "Schedule" - shut down after all active sessions exit (possibly at once)
-# "TryNow" - shut down, if no active sessions are open; otherwise, do nothing
-# "ForceNow" - shut down unconditionally
-# Default is Schedule
-#DefaultSdMode=ForceNow
-# How to offer shutdown scheduling options:
-# "Never" - not at all
-# "Optional" - as a button in the simple shutdown dialogs
-# "Always" - instead of the simple shutdown dialogs
-# Default is Never
-#ScheduledSd=Optional
-# The directories containing session type definitions in .desktop format,
-# ordered by falling priority.
-# Default is "/usr/local/kde4/share/apps/kdm/sessions"
-SessionsDirs=/usr/local/kde4/share/config/kdm/sessions,/usr/local/kde4/share/apps/kdm/sessions
-# The file (relative to $HOME) to redirect the session output to. The
-# following character pairs are replaced:
-# - %d -> current display
-# - %u -> current user
-# - %r -> empty at first. See below.
-# - %% -> a single %
-# When the constructed filename cannot be used safely and the specification
-# contains %<stuff>r, other names will be tried - this time expanding %<stuff>r
-# to <stuff> followed by a random number.
-# Default is ".xsession-errors"
+Authorize=true
+AutoReLogin=false
 ClientLogFile=.xsession-errors-%d
-# Fallback when ClientLogFile cannot be used. The same expansions are
-# supported. DO NOT use relative paths here.
-# Default is "/tmp/xerr-%u-%d%-r"
-#ClientLogFallback=/var/log/xsession-errors/%u-%d%-r
-# Whether KDM's built-in utmp/wtmp/lastlog registration should be used.
-# Default is true
-#UseSessReg=false
+Reset=/usr/local/kde4/share/config/kdm/Xreset
+Resources=/usr/local/kde4/share/config/kdm/Xresources
+Session=/usr/local/kde4/share/config/kdm/Xsession
+SessionsDirs=/usr/local/kde4/share/config/kdm/sessions,/usr/local/kde4/share/apps/kdm/sessions
+Setup=/usr/local/kde4/share/config/kdm/Xsetup
+Startup=/usr/local/kde4/share/config/kdm/Xstartup
 
-# Greeter config for all displays
 [X-*-Greeter]
-# Specify the widget style for the greeter. Empty means to use the
-# built-in default which currently is "Oxygen".
-# Default is ""
-GUIStyle=Lipstik
-# Specify the widget color scheme for the greeter. Empty means to use the
-# built-in default which currently is "Oxygen".
-# Default is ""
-ColorScheme=lipstikstandard
-# What should be shown in the greeter's logo are:
-# "None" - nothing
-# "Logo" - the image specified by LogoPixmap
-# "Clock" - a neat analog clock
-# Default is Clock
-LogoArea=Logo
-# The image to show when LogoArea=Logo.
-# Default is ""
-LogoPixmap=/usr/local/share/icons/crystalsvg/64x64/apps/kmenu.png
-# The relative coordinates (X,Y in percent) of the center of the greeter.
-# Default is "50,50"
-GreeterPos=50,50
-# The screen the greeter should be displayed on in multi-headed and Xinerama
-# setups. The numbering starts with 0. For Xinerama, it corresponds to the
-# listing order in the active ServerLayout section of XF86Config; -1 means
-# to use the upper-left screen, -2 means to use the upper-right screen.
-# Default is 0
-#GreeterScreen=-1
-# The headline in the greeter. The following character pairs are replaced:
-# - %d -> current display
-# - %h -> host name, possibly with domain name
-# - %n -> node name, most probably the host name without domain name
-# - %s -> the operating system
-# - %r -> the operating system's version
-# - %m -> the machine (hardware) type
-# - %% -> a single %
-# Default is "Welcome to %s at %n"
-GreetString=Welcome to PC-BSD 1.5
-# Whether the fonts used in the greeter should be antialiased.
-# Default is false
 AntiAliasing=true
-# The font for the greeter headline.
-# Default is "Serif,20,bold"
-GreetFont=Sans Serif,16,-1,5,50,0,0,0,0,0
-# The normal font used in the greeter.
-# Default is "Sans Serif,10"
-StdFont=Sans Serif,10,-1,5,50,0,0,0,0,0
-# The font used for the "Login Failed" message.
-# Default is "Sans Serif,10,bold"
-FailFont=Sans Serif,11,-1,5,75,0,0,0,0,0
-# What to do with the Num Lock modifier for the time the greeter is running:
-# "Off" - turn off
-# "On" - turn on
-# "Keep" - do not change the state
-# Default is Keep
-#NumLock=Off
-# Language and locale to use in the greeter, encoded like $LANGUAGE.
-# If empty, the settings from the environment are used.
-# Default is ""
-Language=en_US
-# Enable autocompletion in the username line edit.
-# Default is false
-UserCompletion=false
-# Enable user list (names along with images) in the greeter.
-# Default is true
-UserList=true
-# User selection for UserCompletion and UserList:
-# "NotHidden" - all users except those listed in HiddenUsers
-# "Selected" - only the users listed in SelectedUsers
-# Default is NotHidden
-ShowUsers=NotHidden
-# For ShowUsers=Selected. @<group> means all users in that group.
-# Default is ""
-SelectedUsers=
-# For ShowUsers=NotHidden. @<group> means all users in that group.
-# Default is ""
+AuthComplain=true
+ColorScheme=
+FaceSource=AdminOnly
+FailFont=Sans Serif,10,-1,5,75,0,0,0,0,0
+ForgingSeed=1214515065
+GUIStyle=Oxygen
+GreetFont=Serif,20,-1,5,50,0,0,0,0,0
+GreetString=Welcome to %s at %n
+GreeterPos=50,50
 HiddenUsers=
-# Special case of HiddenUsers: users with a non-zero UID less than this number
-# will not be shown as well.
-# Default is 0
-MinShowUID=1000
-# Complement to MinShowUID: users with a UID greater than this number will
-# not be shown as well.
-# Default is 65535
+Language=en_US
+LogoArea=Logo
+LogoPixmap=/usr/local/kde4/share/apps/kdm/pics/kdelogo.png
 MaxShowUID=65000
-# If false, the users are listed in the order they appear in /etc/passwd.
-# If true, they are sorted alphabetically.
-# Default is true
+MinShowUID=1000
+Preloader=/usr/local/kde4/bin/preloadkde
+SelectedUsers=
+ShowUsers=NotHidden
 SortUsers=true
-# Specify, where the users' pictures should be taken from.
-# "AdminOnly" - from <FaceDir>/$USER.face[.icon]
-# "PreferAdmin" - prefer <FaceDir>, fallback on $HOME
-# "PreferUser" - ... and the other way round
-# "UserOnly" - from the user's $HOME/.face[.icon]
-# Default is AdminOnly
-FaceSource=PreferAdmin
-# The directory containing the user images if FaceSource is not UserOnly.
-# Default is "/usr/local/kde4/share/apps/kdm/faces"
-#FaceDir=/usr/share/faces
-# Specify, if/which user should be preselected for log in.
-# "None" - do not preselect any user
-# "Previous" - the user which successfully logged in last time
-# "Default" - the user specified in the DefaultUser option
-# Default is None
-#PreselectUser=Previous
-# If this is true, the password input line is focused automatically if
-# a user is preselected.
-# Default is false
-#FocusPasswd=true
-# If this is true, the entered password is echoed as bullets. Otherwise,
-# no feedback is given at all.
-# Default is true
-EchoPasswd=true
-# If true, krootimage will be automatically started by KDM; otherwise, the
-# Setup script should be used to setup the background.
-# Default is true
+StdFont=DejaVu Serif,10,-1,5,50,0,0,0,0,0
+Theme=/usr/local/kde4/share/apps/kdm/themes/pcbsd7
 UseBackground=true
-# The configuration file to be used by krootimage.
-# Default is "/usr/local/kde4/share/config/kdm/backgroundrc"
-#BackgroundCfg=/usr/local/kde4/share/config/kdm/backgroundrc
-# Hold the X-server grabbed the whole time the greeter is visible. This
-# may be more secure, but it will disable any background and other
-# X-clients started from the Setup script.
-# Default is false
-#GrabServer=true
-# How many seconds to wait for grab to succeed.
-# Default is 3
-#GrabTimeout=3
-# Warn, if display has no X-authorization (local auth cannot be created,
-# XDMCP display wants no auth, or display is foreign from StaticServers).
-# Default is true
-#AuthComplain=false
-# Random seed for forging saved session types, etc. of unknown users.
-# This value should be random but constant across the login domain.
-# Default is 0
-ForgingSeed=1113045471
-# Specify conversation plugins for the login dialog. Each plugin can be
-# specified as a base name (which expands to $kde_modulesdir/kgreet_$base)
-# or as a full pathname.
-# Default is "classic"
-#PluginsLogin=sign
-# Same as PluginsLogin, but for the shutdown dialog.
-# Default is "classic"
-#PluginsShutdown=modern
-# A list of options of the form Key=Value. The conversation plugins can query
-# these settings; it is up to them what possible keys are.
-# Default is ""
-#PluginOptions=SomeKey=randomvalue,Foo=bar
-# Show the "Console Login" action in the greeter (if ServerTTY/ConsoleTTYs
-# is configured).
-# Default is true
-#AllowConsole=false
-# A program to run while the greeter is visible. It is supposed to preload
-# as much as possible of the session that is going to be started (most
-# probably).
-# Default is ""
-Preloader=/usr/local/kde4/bin/preloadkde
-# Whether the greeter should be themed.
-# Default is false
-UseTheme=false
-# The theme to use for the greeter. Can point to either a directory or an XML
-# file.
-# Default is ""
-Theme=""
+UseTheme=true
+UserCompletion=false
+UserList=true
 
-# Core config for local displays
 [X-:*-Core]
-# How often to try to run the X-server. Running includes executing it and
-# waiting for it to come up.
-# Default is 1
-#ServerAttempts=1
-# How long to wait for a local X-server to come up.
-# Default is 15
-#ServerTimeout=15
-# The command line to start the X-server, without display number and VT spec.
-# This string is subject to word splitting.
-# Default is "/usr/local/bin/X"
-ServerCmd=/usr/X11R6/bin/X -br
-# Additional arguments for the X-servers for local sessions.
-# This string is subject to word splitting.
-# Default is ""
-ServerArgsLocal=-nolisten tcp
-# Additional arguments for the X-servers for remote sessions.
-# This string is subject to word splitting.
-# Default is ""
-#ServerArgsRemote=
-# Restart instead of resetting the local X-server after session exit.
-# Use it if the server leaks memory etc.
-# Default is false
-#TerminateServer=true
-# The signal needed to reset the local X-server.
-# Default is 1 (SIGHUP)
-#ResetSignal=1
-# The signal needed to terminate the local X-server.
-# Default is 15 (SIGTERM)
-#TermSignal=15
-# Create X-authorizations for local displays.
-# Default is true
-#Authorize=false
-# Which X-authorization mechanisms should be used.
-# Default is "MIT-MAGIC-COOKIE-1"
-#AuthNames=
-# Need to reset the X-server to make it read initial Xauth file.
-# Default is false
-#ResetForAuth=true
-# See above
 AllowNullPasswd=true
-# See above
 AllowShutdown=All
-# Enable password-less logins on this display. USE WITH EXTREME CARE!
-# Default is false
-NoPassEnable=true
-# The users that do not need to provide a password to log in. NEVER list root!
-# "*" means all non-root users. @<group> means all users in that group.
-# Default is ""
+NoPassEnable=false
 NoPassUsers=
+ServerArgsLocal=
+ServerCmd=/usr/local/bin/X -br
 
-# Greeter config for local displays
 [X-:*-Greeter]
-# See above
-PreselectUser=None
-# See above
-FocusPasswd=true
-# Specify whether the greeter of local displays should start up in host chooser
-# (remote) or login (local) mode and whether it is allowed to switch to the
-# other mode.
-# "LocalOnly" - only local login possible
-# "DefaultLocal" - start up in local mode, but allow switching to remote mode
-# "DefaultRemote" - ... and the other way round
-# "RemoteOnly" - only choice of remote host possible
-# Default is LocalOnly
-LoginMode=DefaultLocal
-# A list of hosts to be automatically added to the remote login menu. The
-# special name "*" means broadcast.
-# Default is "*"
-#ChooserHosts=*,ugly,sky,dino,kiste.local,login.crap.com
-# Show the "Restart X Server"/"Close Connection" action in the greeter.
-# Default is true
 AllowClose=false
-# The user to preselect if PreselectUser=Default.
-# Default is ""
 DefaultUser=
+FocusPasswd=true
+LoginMode=DefaultLocal
+PreselectUser=Previous
 
-# Core config for 1st local display
 [X-:0-Core]
-# The TTY line (without /dev/) the X-server covers physically.
-# Default is ""
-ServerTTY=
-# Enable automatic login. USE WITH EXTREME CARE!
-# Default is false
 AutoLoginEnable=true
-# If true, auto-login after logout. If false, auto-login is performed only
-# when a display session starts up.
-# Default is false
-#AutoLoginAgain=true
-# The delay in seconds before automatic login kicks in.
-# Default is 0
-#AutoLoginDelay=10
-# The user to log in automatically. NEVER specify root!
-# Default is ""
-AutoLoginUser=
-# The password for the user to log in automatically. This is NOT required
-# unless the user is logged into a NIS or Kerberos domain. If you use this
-# option, you should "chmod 600 kdmrc" for obvious reasons.
-# Default is ""
-#AutoLoginPass=secret!
-# Immediately lock the automatically started session. This works only with
-# KDE sessions.
-# Default is false
-#AutoLoginLocked=true
-# See above
+AutoLoginLocked=false
+AutoLoginUser=kris
 ClientLogFile=.xsession-errors
+ServerTTY=
 
-# Greeter config for 1st local display
-[X-:0-Greeter]
-# See above
-#PreselectUser=Default
-# See above
-#DefaultUser=johndoe
+[Xdmcp]
+Enable=false
+Willing=/usr/local/kde4/share/config/kdm/Xwilling
+Xaccess=/usr/local/kde4/share/config/kdm/Xaccess



More information about the Commits mailing list